Purchase document, mail output type, name of the sender in title...

Hello everyone,
when a user send a purchase document by mail, the vendor, in the mail title, see the user ID instead if his First+LAST name (field "BNAME" instead of "NAME_TEXT" in the SUO1d, adress part). How can i change that?
Thanks a lot for answering.

Hi Friend,
I think mail is firing through output type.
Check the program name in NACE transaction. Consult with ABAPer that the program is sending with which header information and changed it accordingly.
Generaly SO_OBJECT_SEND_AP11 is used for sending.
Hope it will help you.
Regards
Krishnendu

Similar Messages

Output type configuration for the Goods Receipt without the PO.

Hi,
I have a scenario whereby I want two Smartform(s) to fire from the MIGO Transaction. It is for Goods Recepit / others . Movement type '501'. Now we have created a new output type ZWE1 and configured in the system in the Transaction SPRO as follows:
Materials Management Inventory Management and Physical Inventory Output Detaremination Output types
ZWE1 is configured along with the Program and the Routine name but no Smartforms has been specified since there are two smartforms to be triggered via this Z program and via MIGO based on the material type which would be decided by the Program internally.
We have also configured the Material Output Determination and the Procedures fin the Ciondition Procedures for the Control data ME0001 mentioning this output type without the requirement code 173.
We have also configured the Output type ZWE1 with the Program name and the Routine in the link Assign Forms and Program
but somehow the Program still does not get trigerred.
Can anyone please tell me what is the reason for this and how this Prpblem should be addressed.
Any help on this front would be appreciated.
Suitable eward points would be awarded if Your solution works.
Thanks,
Regards,
Deepak.

Answered.

Mail running under LIon no longer grays out the name of the sender of an email that has been read. How can I get that to happen?

Under the old version of Mail, when an e-mail was read, the name of the sender was greted out so that I knew I had read that email. This does not seem to happen under the new Mail thaqt came with Lion. Help!?
Chuck Humphrey
[email protected]
303-997-2755

Kirk,
Thanks again for your suggestions. No, I don't get an
error message. In fact nothing happens. My name and
key are typed in and from what I understand, once you
do that with a real key it directs you to the
registration page. When I get done entering the
information the window just sits there without any
button or option to continue.
QT Pro is already in the QT (non-pro) you installed and the key (which is a hash of your name in part) allows the Pro features to work.
No redirect, internet, nothing like that. As such many people have activated and think they haven't. Just look at the menu items and see if the "Pro" logo is shown next to a few (which are greyed out and not available without Pro). If not you are done.

Messaging Server 4.1: Received mail is not returned to the sender if the receiving local account does not exist.

I have found that received mail is not returned to the sender if the receiving
local account does not exist. This problem occurs even if I use Console to
enable the Return message to sender option under the error handling methods.
In addition, I have used the configutil
to confirm that I have set the value
for Unknown account action to "13," which corresponds to the settings "Return
message to sender," "Notify the postmaster via email," and "Log the error in
the log file." Yet, in this situation, an error message is being sent to
postmaster, but not to the sender, and the error is not being recorded in the
log file.

Do the following steps: 

<OL>
<LI>From Console, open the appropriate Messaging Server.
<LI>Click the Configuration tab.
<LI>Open the Services folder.
<LI>Select SMTP.
<LI>Click the System tab.
</OL>

Check the "Domain handled by this server exclusively" field to make sure that
your mail domain is listed. If your mail domain is not listed, then Messaging
Server will assume that there is another mail server that is handling the
domain listed and will forward requests to this server.

For more information, please see the document Messaging Server
Administrator's Guide, Chapter 3, Configuring SMTP Services at 
http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/smtp.htm#1010371

On Thu, 12 Dec 2013 16:16:02 +0000, lpphiggp wrote:
> I'm seeing this XTCOM error occur all over our /var/log/messages for one
> server, running SLES11sp2 / OES11/sp1;
>
> I don't really know what this is even for. We don't use NetStorage or
> iPrint even, this server only does basic NCP file serving, DHCP, and
> hosts a GroupWise PO.
> Is this anything to be concerned about?
If this:
http://www.linuxquestions.org/questi...entication-vs-
edirectory-825043/
is to be believed, it seems to indicate that your NAM configuration on
this server is not valid. I'm not seeing this message here on the OES
servers I looked at, and NAM is working correctly here.
David Gersic dgersic_@_niu.edu
Knowledge Partner http://forums.netiq.com
Please post questions in the forums. No support provided via email.
If you find this post helpful, please click on the star below.

Passing the queue name to the sender JMS adapter at run time..

Hello Experts,
I have a scenario where PI is to pick data from MQ queues. The message type coming from queues is same and the procession needs to be done with PI is also the same.That's the reason why we want to have only one interface processing the data for all the queues.
My question here is that is there any way where I do not put the queue name in the sender adapter at design time and based on the data availability in the queue let the sender adapter know the queue name to be processed at run time.
Any suggestions will be greatly appreciated.
- Rajan

> My question here is that is there any way where I do not put the queue name in the sender adapter at design time and based on the data availability in the queue let the sender adapter know the queue name to be processed at run time.
Unfortunately for JMS Sender CC it is not possible, but other way around is possible. I.e. you can dynamically choose the receving queue names by using ASMA "JMSReplyTo" in JMS Sender CC.
Regards,
Sarvesh

RQ: Receive files in folder with name of the sende...

Hello,
I don't know is I'm on the right place and I don't know is there same request, so I apologize if it exist...
Please, make option the received files to be saved in folder with the name of the sender. For example: my friend with skype name XYZ send me a file 'foo.bar' that will be saved in \My Documents\Skype_save (I changed the default dir); another friend with name XXY send me file 'foo1.bar' and again it will be in \My Documents\Skype_save, but when there are many files it is difficult to sort them and know whose files sended by who... So the good choise is if the files are saved in folder with name XYZ, XXY etc... Example:
\Skype_save\XYZ\foo.bar
\Skype_save\XXY\foo1.bar
I'm sorry for my bad english, it's not my native language. I hope you can understand what I mean with this folders

There is no automatic option in Skype that can do what you are trying to accomplish. However, you can in advance create save folders named as your contacts and and each time you receive a file, to save the file in the appropriate folder.
For this to function, you have to set the option in Tools -> Options -> IM settings -> Show advanced options to “Choose a folder where to save the file every time”.

Dynamic display name of the sender

I have requirement like below:
After creating and executing any Agent/iBOt in OBIEE 11g, the Display Name of the Sender in the From address of email delivered to recipients is showing as "Administrator".
The user who is authenticated and authorized into the OBIEE also created an agent, he is asking that email should show his name in the From Address when it is delivered to the recipients.
I know why this is happening, I have provided the Display Name of Sender as "Administrator" while configuring the Agents at the Enterprise Manager Level.
What I am currently looking is, if there is any alternate solution to Dynamically display the name of the user who creates the Agent in the From address of the email when it is delivered to the recipients.
Thanks in advance
-Bharath

Any body there with the answers !!

When I send an email, a photo appears after my name in the sender line. How do I get rid of it?

When I send an email, a photo appears after my name in the sender line. How do I get rid of it?

I don't have a signature set up, but did a little research. Someone posted that these will show up when I send an email to myself, but will not show up when sent to another person. I sent a test email to a friend to check for sure.

File Name in the Send Port with PGP Encryption

Hello,
The File Name in the Send Port should be set with the mask like ABC.txt.pgp. Since I have used the PGP Encryption Component it is generating the File name like ABC.pgp.txt.pgp. But what I need is just the ABC.txt.pgp. How can be this be done. Any help is
greatly appreciated.
Thanks

What you are seeing is the expected behavior. If you are referring to this:
https://code.msdn.microsoft.com/windowsdesktop/BizTalk-Sample-PGP-ebcbc8b2
or one of it's derivatives, it will internally modify FILE.ReceivedFileName to append .pgp if that property is set.
So, if you use just %SourceFileName%, you will likely get the desired result. Otherwise, you will have to explicitly set FILE.ReceivedFileName to ABC.txt somewhere before the PGP component.
You can also modify the source code to remove this behavior.

Is there a way to hide the name of the sender of a text message?

Is there a way to hide the name of the sender of a text message?

If the sender's name is not in your Contacts only the number will be shown, not the name.

Change the format of the name of the sender in UWL

Hi Experts ,
In my UWL the column "FROM" , display the name of the sender as " Last name, First name" . My requirement is to display the name as "Firstname, Last name " .
eg: In my uwl now it display like "Jobs, Steve" . But my requirement is to display it like "Steve, Jobs".
Can you suggest any solution for this requirement ?
Regards,
Sumana

>Our client is requested for this naming format Firstname , Lastname .
Did they tell why?
I don't know any other way than creating a new custom columns & attributes into UWL and then populating them from the webflow/workflow container. Then you of course need to populate the workflow container too properly. I personally see this as something that I would avoid to do at all costs. Also remember that the "sender" task will not perhaps work properly even in its current form in the future or in some other workflow. If the work item is create by workflow system user WF-BATCH, the sender column will show this user instead of the "real sender". This is highly likely scenario.
Of course there might be some easier way to do this from the UWL/portal side. But I guess the standard way is the one that Armando described.
Regards,
Karri

No Name of the Sender in whatssap notifications in iPhone

Whenever i receive whatssap message notifications on my ios home screen , it doesnt display the name of the sender.
Instead of that , the names which each of the contacts have included in their "whatssap profile" section, is being displayed along with their message.
& for contacts who have not included their name in the profile sections, whenever they send me a message, my notifications shows " Whatssap" as the name of the sender along with their message
When i click on whatssap application , the names of all contacts in the chat section is as per my contacts list only. I dont see these names during the notifications.
For eg
Suppose I have a contact name as Michael in my iphone. ( Michael may have put his name in profile section of whatssap as Mike ).
So,, whenever Michael sends me whatssap message , i should receive notification as "Michael -- & the message he sent".
But I receive notification as " Mike -- & the message he sent"

Since your using a 3rd party app ask whatsapp.

Output type is used for sending / printing "schedule lines" against sch agr

hi
which output type is used for sending / printing "schedule lines" against sch agreement
LPET or LPH1?
sara

Hi Sara,
It is LPET.
Thanks & Regards,
Kiran

GR Output type based on the different PO

Hi,
When the user do the GR based on the Different Purchase Order Say Eg: NB, ZNB, ZCO. The GR should print in the Different Printer Say Printer A for Document Type NB, Printer B for Doc Type -ZNB and Printer C for document Type ZCO.
How to do the Configuration Setting Output Types for Goods Receipt.
Pls help me on this.....Ugrent..!!!

try using t code omj3 and mn21

Table for Sales Document and Output Type

Hi All,
Can anyone please tell me the table where I can find the SALES DOCUMENT NUMBER and the OUTPUT TYPE assignment.
Regards
Vikas

Hi,
Goto the Transaction code SE16 and enter the table name as NAST
In the APPLICATION enter V1
And in the MESSAGE TYPE give Output type
execute and you will get the sales documents created with the output.
thanks,
santosh

Purchase document, mail output type, name of the sender in title...

Similar Messages

Maybe you are looking for