PURCHASE INFO RECORD TAX CODE UPDATION THROUGH PO

In Purchase info record tax code is alredy exist for one vendor and material.
while making new Purchase order for same vendor and material but tax code is differant then can tax code will not update automatic in purchase info record.
How to do automatic updation in purchase info record?

Hi,
The Tax code will be updated from the PO at the first time Info record created from the PO as per the Info update setting.
In your case as already with tax code an Info record exist as per standard the new tax code willn't get updated in to the existing info record. You have to change the new tax code in the info recordfrom the transaction ME12.
Regards
Eshwar H

Similar Messages

Consignment purchase info record - no tax code found

Dear all
I have faced one problem regarding the consignment purchase info records' tax code. When I go to create the consignment pur info record we couldn't find any values existed in the field tax code. However, if I go to change another plant, the tax code information can be selected. (the plant - BP04 country HK is not worked, the plant BP06 country AU is fine). If we created the purchase info record without tax code, we would see a error when we are doing MRKO. Why ??? I have already double checked the configurations, it seems fine. Please see below. Could you help me to solve this ?? thanks a lot.
1. define procedure OBQ3
Step 1,condition type BASB
Step 2,condition type MWVS (input tax),from 1 to 1, account key VST.
Step 3,condition type MWAS (output tax),from 1 to 1, account key MWS (out put tax)
2. Assign country to calculation procedure in OBBG
3. Define tax codes for sale and purchase in TC FTXP
input tax indicates V
output tax indicates A
4.Assign tax code for non taxble transactional OBCL
5.Define tax accounts OB40.

closed

Purchasing Info Record

Dear Group Members
1. How Purchase info is created automatically?
Purchase info record is not updated when we use ordering measure in PR
(followed the instruction as per sap help)
I donu2019t want to change Purchase info
details as followed from SAP HELP DOCUMENT
Message No : ME898
UNIT H is not intentend as an order unit
System Response:
The system check whether the order unit you entered is allowed for this purchase order by comparing the order unit you entered with the order unit that the system determined
The system check the potential source of the order unit in the given sequence. if a source is not available (if the purchase order is not referenced to a preceding document for example ) then the system checks the next possible source ( such as purchase requisition ):
1 If you create a PO with reference to a proceeding document (PO, Contract or request for quotation), the system copies the order unit from the preceding document. The Var. OUn (variable order unit) indicator must not be selected in the Purchase info record
2 If you create a po with reference to PR and the var, OUn indicator is selected in the purchasing info record, the system copies the order unit from purchase requisition.
In Enjoy PR ( ME51N)you can maintain the order unit on the item detail screen on the sorce of supply tab. in the normal PR (ME51)you can maintain the order unit on the item details screen
3 When the Purchasing info record for the combination of vendor and material exists, the system copies the order unit from the purchasing info record
4 IF you create a purchase order with reference to PR and VAr .OUn is not selected in the purchasing info record, the system copies the order unit from the purchasing requisition
5 If you create a purchase order with reference to a pr and their is no existing purchase info record for the combination of vendor & material , then the system copies the unit of measure from the PR item in the item overview.
6 If you create a normal purchase order the system copies the order unit the material master
7 When you create a stock transport order the system copies the unit of measure from material master
8 If order unit and the unit of measure were not defined in the material master the system copies the material master base unit of measure
You people guide me how can i update Purchase info record?
I have Query to be solved .
Regards
Shamulheq

Hi ! Jason M.
I checked the below configuration
SPRO - MM - Purchasing - Purchase order - Define screen layout at doc.level - Select ME21N - details - administrative data, item - Info update (optional or required).
In my configuration screen Info update is optional
Even though info records are not updated
My Query
PR Unit of measure is created in each, PO had created in each in the month of June & info records are in each fo the vendor
Now the Purchase group realize that the PO should be in Days
We made the changes in Material master ordering unit of Measure in days DAY
A) If we Crete PO system will not allow to save PO in days but only allows to save in Unit of measure as EA
B) If PO created by removing the info record PO is saved in unit of measure as days with the same info record
But info records are not updating Pleas provide some solution solve this
Regards
Shamulheq

Bapi for Purchasing Info Record

Hi,
Is there any Bapi for creating Purchasing Info Record, Transaction code ME11.
How do we generally go about it.
-Thanks,
Sneha.

I'm also looking for an function module or a BAPI, so I hape that anybody will give us a hint
Thanks

Purchasing info Record - Auto update Setting

Dear Experts,
I have some query with purchasing info record: please go through the following scenario:
I have created some po in post with tax code "V1 - 4% Vat" and with reference to those info records are already created (as there was info update indicator was ticked in PO)
now, as tax rates are changed, i am creating PO with new tax code "V2 - 5% Vat" but even there is info update indicator is ticked in PO its not getting updated in the same info record
kindly adivice what settings are required to be done in system.
Thanks
N. Chauhan

Please note that if you create a PO for a material/ Vendor combination without a info record then system will automatically create an info record @ the time of PO creation If info update is on & will save the tax code in the info record which you enter in the PO.
But once an info record is generated then system wont overwrite the tax code in the info record even though the info - update is on. This is Std - System Behaviour.
If you dont want the particular tax code then go to ME12 & edit the tax code & check.
Thanks & Regards,

Mass Change Of Vendor Code in Purchasing Info Records

Hi All,
I have one query and I already search a lot for it but didn't find any specific solutions.
I want to change a vendor code in around 1000 Purchasing Info Record, I had already tried for Mass Maintenance Through T. Code - MEMASSIN, But I found Vendor field in New Values as Grey Field.
Is there any other way to mass change of Vendor in Purchasing Info Records.
Why vendor field is showing me as a grey Field?
Thanks In advance
With Regards,
Patanjali Bhagat

Hi Govardhan,
Pl correct me if i am wrong....EINA-RELIF field is to check and uncheck for regular vendor...It will not change the vendor ID...
EINA-LIFNR...is the field to change vendor no.., but i can not see this field name is not there in the table...
Still i think that we can not change the vendor id's once it is created for Info record...
Pl correct me if am wrong.
Uts

Update Scales on Purchasing Info Record

Dear All,
I need to upload and update Scales on Purchasing Info Record.
Is there any BAPI or IDOC or Standard Batch/Direct Input (LSMW) or any Function module for this data upload.
Thanks in advance.

Thanks for your suggestion but I have lots of records and I couldn't use t-code MEKP to create those scales on PIR.
I won't only update existing scales on PIR but also I want to crate new scales on PIR. Is there anybody to suggest me any upload programme(BAPI, IDOC, Direct Input) for it?

Pricing not updated in Purchase Info Record using INFREC01. is it possible?

Hi Gurus,
I am using IDoc INFREC01 to create Purchase info record for material, but when I see in ME13 that PIR is created successfully but price is never updated, though I have populated field NETPR and EFFPR hence condition PB00 (basic pricing condition) not created.
Is it possible to update only single pricing (basic price PB00) condition through INFREC01 ??? or should I use another BAPI or some standard report ...??.
I am extending Pricing Conditions for Purchase inforec through seprate IDOC: COND_A01, but it could only do that if there is basic pricing condition i.e. PB00.
Please advice.
Thanks in advance.
Robin

HI,
You can update pricing field for conditon type PB00, please use correct validity period.
Even there are no basic Price condition PB00, you can add new condition types with existing types.
Price vaue can depend on the pricing conditions that you have maintained.
Thanks....

HI... Create\Update pricing in Purchase Info Record

Hi Guru's,
I have got requirement to create or update the pricing condition in purchase info record (PIR).I have used below function modules to create or update General and purchase information for PIR but using those function module, im not able to create or update pricing condition..
ME_INITIALIZE_INFORECORD
ME_DIRECT_INPUT_INFORECORD - Create new entries in PIR
ME_MAINTAIN_INFORECORD - Change the PIR
ME_POST_INFORECORD
I have tried the below function module to create or update pricing condition,here issue is function module successfully executed but it was not upating PIR.
ME_PRICING_REFRESH
ME_PRICING_DIALOG
ME_PRICING_INFORECORD
Could you please provide any sample code / function module to update the pricing condition in PIR.
Thanks in Advance.

Dear Shivakumar,
Can you kindly provide sample code for the function module MASS_CHANGE_PURINFO_REC? I found it is difficult to figure out how to populate the import parameters. And the Where-used function didn't return any result, so I can't even refer to the standard program. Thank you!
Regards,
Arwen

Update/create the purchase info records

Hi All,
i got a requirment for update/create the purchase info records for the transaction ME11.
i came to know that the FM <b>ME_DIRECT_INPUT_INFORECORD</b> is suitable for this requirment.
but when i am trying to test this by passing data to I_EINA and I_EINE.
it is giving some error message like "<b>Please enter at least one vendor</b>, Number entered not within external number range and etc".
can any one guid me in passing the data to this function module, i.e. what are the required fields that are to be passed to this FM.
if i have to update/create the EINA & EINE table data.
Thanks,
Rama

Hi,
Better use report RM06IBI0 - read its documentation with
Tcode SE38
Greetings Andreas

Updation of purchase info record during cost is released / additive costs

Hi Gurus,
Is there any enhancement available to to update the purchase info record with thecondition type
fild during release of materials using CK40N /CK24.
ie Whenever a cost is released , the object should populate the overhead condition type (ZUB1) on the INFO record
Another requirement is
Whenever there is adding/updating additive costs (ck74n and ck75n), the object should populate the corresponding condition types on the INFO records (ZFR2 for freight cost; ZOC2 for duty cost).
If you have any suggestions kindly replay.
Thank you very much.
Regards,
Jayaram.

Hi,
But my next question is how can I know how much cost centers will be for some document? If I need to define number of cost centers in advance, then this solution is not very flexible. The best solution would be if I could add values to classification flexibly (for example: one time 3 values and the other time 1 value).
:-Check box additional values in values tab of char. that will allow to enter flexible number of values any time
The other question is about values of parameters. For each cost center I need to enter two values (cost center number, and costs for that cost center). So, for each cost center I need to add 2 values. Is that possible using classification?
:-Create classification with chara. cost center, cost center value and check box additional values as above that will allow you to add values for cost center and cost center value.
Anirudh.

Update price in purchase info record

Hi ,
We have a requirement to update Price in consignment purchase info records. this case i tried with below function modules but not updating price at pricing condition level.
ME_POST_INFORECORD
ME_UPDATE_INFORECORD
ME_UPDATE_INFORECORD_COND
ME_PRICING_INFORECORD
Please suggest to acheive the issue.
Regards
Veera

Hi,
Try the following function module:
MASS_CHANGE_PURINFO_REC.
Regards,
Sachin Mahajan.

BAPI for Purchase info record creation

Hi
Please let me know how to create purchase info record through BAPI, with tax codes along with material price.
please guide me.
Simha

Hi,
ME_MAINTAIN_INFORECORD
ME_UPDATE_INFORECORD
ME_GET_INFORECORD_CONDITIONS
ME_PRICING_INFORECORD.
ME_DIRECT_INPUT_INFORECORD
ME_POST_INFORECORD.

PO type UB is pulling in a Purchase Info Record - should this happen?

Hi All,
I've been looking around the net few a few days, off and on, but I can't find an answer.
A colleague has created a Purchase Order type UB but it is bringing in a Purchase Info Records that relates to a different receiving plant. This is bringing an incorrect tax code into play.
The work around is currently as follows
Go into the (incorrect) PIR that is being engaged
Remove the tax code
Process the PO
Go back into the PIR and change the tax code back to it's original setting,
Am I correct in assuming that PIRs are not engaged in a UB transfer?
What should be done to stop this from happening
Apologies if this is obvious or if I have not given enough info.
Cheers
Colm
Edited by: Colm McCann on Dec 10, 2008 2:56 PM

I know that I need info records for UB order if I work with APO.
Are you sure that the inforecord that is pulled is for a different receiving plant?
Is the info record really created at plant level, or only at purchasing org level?
And both plants share the same purchasing org?

Automatic creation of purchase info record

Hi friends
I could not find check box in RFQ (ME41!N)or in Quotation (ME47N) for updating/automatic creation of purchase info record.
Thanks
Sunny

Hi,
you can maintain the info update for the required quotation through ME47.choose the required line item and click on the "item detail" icon and put the necessary value for info update:
1-     No update
2-A     Update with or without plant
3-B     Update with plant (if no plant ban)
4-C     Update without plant (if no plant requirement)
Indicator: Update Info Record
Determines whether:
The purchasing info record for this vendor and material is to refer to this PO item, and
The item is to be valid for the entire purchasing organization or just for the plant.
Use
The indicator determines which prices and conditions are suggested in future PO items.
Prices and conditions can apply to an entire purchasing organization or to a single plant within a purchasing organization.
For example, if you create a purchase order for a plant for which an info record has been defined at plant level, the purchase order is based on the conditions in the plant info record and not on the conditions that apply to the purchasing organization.
Procedure
Enter the relevant plant key:
A
Updating of the document number is effected at plant level as long as there is a purchasing info record at plant level. Otherwise the document number is updated at purchasing organization level.
B
Updating is effected at plant level if plant conditions are allowed for the plant.
C
Updating is effected without plant data if plant conditions are not necessary for the plant.
Dependencies
The level at which updating of the document number may be effected is defined for each plant.
Hope this will clarify your query.
Thanks & Regards,
Bijay Pradhan

PURCHASE INFO RECORD TAX CODE UPDATION THROUGH PO

Similar Messages

Maybe you are looking for