Purchase of server 2012 OLP and windows 8.1 enterprise OLP

i want to buy/purchase official DVD's of the  
1: WINDOWS 8.1 ENTERPRISE LICENSES FOR OLP
2: SERVER 2012 R2 LICENSES OLP
(for charity hospital)
my location is Pakistan can any one guide me the official way and process. 

Hi,
Regarding to your issue, I suggest that you should contact Microsoft Customer Service center in Pakistan. I
believe we will get a better assistance there.
For more details, please refer to
Global Customer Service phone numbers.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

  • Just FYI, Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide in Word format in the TechNet Gallery

    The Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide is now available for download in Word format in the TechNet Gallery at
    http://bit.ly/1pYZT3F
    Thanks -
    James McIllece

    hello again,
    meanwhile I was lucky to find this article about Idenity Mapping in TechNet in the Storage Team Blog:
    http://blogs.technet.com/b/filecab/archive/2012/10/09/nfs-identity-mapping-in-windows-server-2012.aspx
    Likely to be overseen at the end of one paragraph it says:
    "Client for NFS does not support NFS V4.1 in Windows 8 or Windows Server 2012"
    Question : Is this an official statement and is it still valid with most recent
    Windows Server 2012 R2 that NFS client does NOT support NFSv4.x  ??
    thanks - Rainer

  • DirectAccess Client not connecting without error code on Windows Server 2012 R2 and Windows 8.1

    Hello,
    we are currently migrating from Windows Server 2012 to 2012 R2 and are not able to get the new Direct Access Service up and running. Our goal is to establish DirectAccess connection for a handful of clients using the IPHTTPS-adapter on the default port 443.
    Errors:
    There is actually no error showing up. It seems the infrastructure tunnel cannot be created but none of the IPv6-transition adapters is connecting (teredo and 6-to-4 are down) and the IPHTTPs adapter gives no informations about a problem:
    >Get-DAConnectionStatus
    Status    : Error
    Substatus : CouldNotContactDirectAccessServer
    >Get-NetIPHttpsState
    LastErrorCode   : 0x0
    InterfaceStatus : Failed to connect to the IPHTTPS server; waiting to reconnect
    Setup:
    Our setup is a virtualized Windows Server 2012 R2 Standard running on Hyper-V. It is located behind a NAT having the Port 443 mapped to the server. The only role installed after the basic install is RRAS including DirectAccess and VPN. The assistants completed
    successfully (running the configuration for DirectAccess and VPN). Operation Status says everything is green und working (for multiple days in the meanwhile). A previous direct access installation (on a different machine running Windows Server 2012) has
    been removed before installing the new server. The new installation is using a different router, so this might also be the cause of a problem.
    The client is a Windows 8.1 notebook located outside the company network accessing the internet through another NAT-device. The client has been able to connect to the previous DirectAccess setup but has never been able to establish a connection after the
    setup of the new Direct Access server. The device has no outbound constraints concerning the NAT-device and is only running the integrated Windows Firewall.
    Diagnosis:
    So far I've done some basic DNS and connectivity checks. The DNS-name can be resolved correctly and the router even responds to pings. The port forward is working and HTTPs connections are generally possible (temporarily routed the port to
    access the NLS-Website located on the server, which worked fine).
    Network monitor shows that both computers are communicating, traffic on the expected Port 443 is incoming on the server and responses from the server reach the client.
    Opening the IPHTTPs-url and in an endless page load. Sometime the browser page closes but I've never seen any result. Using telnet on the port shows that the server is accepting connections. I've even build a small test application that does a GET-Request
    on the URL returning HTTP-200 and no content.
    I'm currently running out of ideas what to do and since no error occurs this is kind of a bit frustrating. Any help appreciated.
    Regards
    Matthias

    Hi,
    In addition, have you disabled the DA client components on the DA client? If no, please also check
    the settings on the Name Resolution Policy Table.
    More information:
    DirectAccess
    Client Location Awareness – NRPT Name Resolution
    In addition, error 0x4C9 means the remote computer refused the network connection. It may be due to the invalid
    registry or corrupt drivers. For more detailed information, please refer to the link below:
    Error 1225 - Error Code 0x4C9
    Note:
    Microsoft is providing this information as a convenience to you. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Best regards,
    Susie

  • DirectAccess Windows Server 2012 R2 and Windows 8.1 - status connecting

    I've successfully deployed DirectAccess on Windows Server 2012 R2 in a 2 node NLB cluster. Everything in the console is green and I can see clients connecting.
    Windows 7 clients can connect and with the DirectAccess connectivity assistant installed show as connected and I can access resources.
    On a Windows 8.1 client I can access resource and run the troubleshooting tool which reports no errors, but if I look at connections it shows as connecting and the status never changes to connected. Clients work correctly when on the internal network.
    I've looked at available hotfixes, but not found anything for when the status is incorrectly shown.
    Any ideas before I raise a support call?
    James Saunders

    Hi,
    You current information hardly determine which part may occur error, I found the similar symptom on the following third party article, may can give you some help.
    The similar issue third party article:
    Windows 8 DirectAccess client keeps saying "Connecting"
    http://tfs.letsblog.it/post/2013/07/10/Windows-8-DirectAccess-client-keeps-saying-Connecting.aspx
    More information:
    The Network Connection Status Icon
    http://blogs.technet.com/b/networking/archive/2012/12/20/the-network-connection-status-icon.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Folder Redirection GPO with Server 2012 R2 and Windows 7

    Hey folks,
    I have recently migrated from 2008 R2 to 2012 R2. I have set up a new GPO to redirect: Desktops & My Documents to the server \\dc.companyname.local\folder_redirections\  on all the windows 7 desktops
    in the office.  
    The problem i ahve having is that when i run gpresult is says that the GPO is being applied but when i check the location of the mentioned locations they are still pointing to the local desktop or the old 2008r2
    server. I have double checked the permission on the share folder and i have even set upo a test folder with everyone having full rights and it still will not
    redirect the folders...  any ideas would be most welcome!
    I cannot post pictures yet until i am verified :)

    > locations they are still pointing to the local desktop or the old 2008r2
    Check event logs. Folder redirection creates events if things go wrong...
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Unidentified network" with Server 2012 R2 and windows 8- Domain & NIC teaming

    i have problem with my network ,before that i had just my domain but now some servers  specially win 2012 detect a network (name:network 4)
    my 2012 windows server cannot be joined to doman also windows 8,but sometimes this problem solves without any troubleshooting and i can join again
    what can be problem
    S.Sanadi

    Hi S.Sanadi,
    According to your description, my understanding is that “Unidentified Network” causes problem with joining domain, and this problem will be resolved automatically.
    If there is no default gateway or the default gateway is useless, the network will be identified as unknown. Check to see if the IP configuration is correct when the network identified unknown. Open command prompt and type:
    Ipconfig /all
    If the parameter is correct, try to ping IP address of default gateway and check to see if it works well.
    Besides, if the connection should be identified as a Domain network and is not, then the likely causes are failure to contact DNS servers or domain controllers on that interface. Ping the IP address of DNS server and DC to make sure that these resources
    are available.
    Regards,           
    Eve Wang

  • REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER

    I am using a window 7 professional  service pack 1 and I purchase REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER. but  the seller did not send me any installation CD or instruction
    on how to use it.
     Please how can I use it on my window 7 professional  service pack 1.
    Thank you.

    Though Bill is absolutely correct for most CALs, Remote Desktop Services does have its own special licensing server.  I haven't installed one on 2012, yet, but here is a step-by-step guide for 2008. 
    http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
    Here is a lab guide for 2012 -
    http://technet.microsoft.com/en-us/library/jj134160.aspx
    But, the explanation of your environment begs the question - what are you trying to do?  You say you have a desktop OS and you are talking about Windows Server products.  In that light, your question does not make a lot of sense.
    . : | : . : | : . tim

  • Hyper-v Role in Windows Server 2012 foundation and Essentials

    Hello,
    I have seen that the two low cost version of Windows Server 2012 essential and Foundation) will not support hyper-v. Can you please tell me what it means exactly :
    Can you please tell me what is possible :
    -The server can not be installed as a hyper-v  guest (probably yes)
    -The hyper-v role can not be installed on the server (so I have to rely on vmware)?
    - Hyper-v role can be installed but there is no free license included with the server.
    Thank you
    Marc

    I suppose then, you would have to install Windows 8 and Hyper-V as your guest or core.
    Then run your Server 2012 Foundation under Win8.  which has 512GB Memory Limit.
    It seems asinine that you cannot install this role on Foundation, but seemingly you could work around it with Win8.  (Or Sun Virtual Box (free) (or VmWare(Free).
    So load up a dozen Win8Pro virutal sessions on that Win8 VirtualBox with up to 512GB Memory and Create your own Ghetto Remote Desktop Server with Foundation and Windows 8.   ;)
    What good is it if your can't run Hyper-V and Remote desktop services?  Those are the two apps small business need most.  But Microsoft strips it out, calls it a DEAL  (Essentials and Foundation) , yet if you want the good stuff, you're gonna
    have to buy Server 2012 Standard anyhow, + the CALs.
    So you are hooked into this "deal" by Microsoft Special Offer.   Its special alright, because you get to buy it twice.  The stripped down version that come with your server, then the full version when you discover Foundatoin and Essentials gives
    you AD, and thats it.  Nothing Else.  No "deal"
    Remember:
    All you get with Foundation or Essentials is AD and Group Policy.
    You cannot load RDP on Foundation or Essentials
    You cannot load Exchange on a DC, or Foundation or Essentials
    You cannot load Exchange and RDP on the same box.
    You cannot have Remote Web Apps if you load RDP on your DC.
    You cannot win with Microsoft.  No worthwhile "deal" has ever come out of the city of Redmond.
    The internet is a one-way money pipeline to Microsoft.
    Its three times the work, three times the cost and requires three servers licenses to do with 2012, what you could do with one 2008R2 license.  
    Might as well purchase 2 Server 2013 Standard Editions if you want:
    1.) Active Directory
    2.) Remote Desktop and Remote Apps
    3.) Your own Exchange Server
    You are better off installing a NAS if all you need is a file server. 
    Why bother with Foundation or Essentials?  Its a "Gimmick-ware"

  • Windows Server 2012 Standard and Essentials User CAL's

    I've been running Windows Server 2012 Essentials in an organization that until recently stayed within the 25 user 50 network device limit specified by the license. Eventually we've grown beyond that. Since the Server 2012 Essentials machine had a non-transferable
    OEM license I decided not to waste it by doing an in-place migration to Server 2012 Standard, and instead set up a new server with freshly purchased Server 2012 R2 Standard and migrated Active Domain roles to it, leaving the original server as a part of a
    fail-over cluster.
    We purchased 30 User CAL's for the 2012 R2, as required for 25+ staff members.
    Now I am curious. The 2 servers that we have right now (2012 R2 Standard and 2012 Essentials) both maintain the same Active Directory and manage the same pool of users and workstations. Does that mean that the primary server with 30 User CAL's takes dominance
    and sets the limit as to how many people are allowed to access the network. Or does it become a combination of purchased 30 CAL's + 25 Users hard-wired into the 2012 Essential edition?
    Do these servers have to run separate domains with segregated pools of users in order to be license compliant for 30+ users or can they exist within the same same domain preserving individual user limits? What if the 2012 Essentials server maintains
    one office location with fewer than 25 staff and the Standard R2 2012 server runs another office with fewer than 30 staff, while both offices are linked via a VPN for the purpose of sharing 3rd party licenses? Do individual user limits apply, or is it still
    30 users max?
    To sum up the question, I'd like to know whether I'd need to buy more user CAL's when we reach more than 30 staff at 1 or possibly 2 office locations.
    Oh, and the device limit! 2012 R2 Standard under user CAL licensing scheme has no machine limits. Essentials is always capped at 50. When running one active directory, what's the legally allowed number of devices on the network? I assume it's unlimited.
    Thanks.

    Thank you for the reply.
    My question then is how to transition while preferably keeping both physical servers.
    Should a 2012 Standard key be purchased additionally for an in-place transition of 2012 Essentials machine to 2012 Standard (which at this point is as good as a fresh install)? Until then, should the Essentials 2012 server be taken offline entirely?
    What about the situation where I described both servers running segregated networks with their own pools of users, only connected via a VPN for 3rd party license sharing? Is that configuration supported?
    Also, if the configurations is unsupported, why are the servers able to share roles in first place? Why isn't there a software mechanism preventing interaction? What configuration do the servers themselves assume is in place?
    Thanks again.

  • I have windows server 2012 R2 and install active directory

    My question is I install active directory in windows server 2012 R2 and create Group Policy. ( These set-up is only for test)
    Have not registered domain only install active directory to test. 
    So the problem is when I created Group policy for my user and put software restriction policy but its affected to my administrator accounts too, No when I open VMware (install Virtual Machine windows XP) and start os then its shows you can not user this
    software as you restricted from installing software (Something like that don't know exact Error). I could not start installed Virtual Machine. 
    Please give me a solution for this.
    This is the setup for a test use only so their not big environment connect with my pc.
    Thanks in advance.
    Regards,
    Krunal

    Hi,
    The following article is talking about creating and managing Group Policy on a Windows Server 2012:
    http://www.thomas-krenn.com/en/wiki/Creating_and_managing_a_Group_Policy_on_a_Windows_2012_Server
    As Darren Blanchard mentioned, if you want to apply the GPO, you could link it to an OU that contain the computer or user.
    Group Policy Overview
    http://technet.microsoft.com/en-us/library/hh831791.aspx
    Please feel free to let us know if you need further assistance.
    Regards.
    Vivian Wang

  • Is it possible to uninstall IE 11 from Windows Server 2012 R2 and replace it with the latest version of IE 10?

    Is it possible to uninstall IE 11 from Windows Server 2012 R2 and replace it with the latest version of IE 10? We have a remote desktop farm setup with 2012 R2 servers and we are publishing some web links that only work with IE10. As a result, we need to
    downgrade the remote desktop servers to IE10. I have a feeling that this isn't possible, but if I could get a definitive answer, I would greatly appreciate it, thank you!

    Hi,
    Agreed with DonPick.
    Internet Explorer 11 is preinstalled with Windows 8.1 and Windows Server 2012 R2.
    More information regarding Internet Explorer 11, please check:
    Internet Explorer 11 - FAQ for IT Pros
    http://msdn.microsoft.com/en-us/library/dn268945.aspx
    Best regards
    Michael Shao
    TechNet Community Support

  • CHKDSK v6.2.9200.16384 dichotomy between Windows 12 Server x64 Standard Build 9200 and Windows 8.1 Enterprise x64

    I seem to have discovered a dichotomy between the ability of CHKDSK v6.2.9200.16384 to detect and repair an external NTFS drive, when executed on Windows 2012 Server Standard Build 9200 x64 and Windows 8.1 Enterprise x64. There should be no difference in executing
    the same application between these two systems.
    Even though both are 64-bit systems, and both are up to date, and both are running the same version of chkdsk, chkdsk on Windows 12 Server was UNABLE to detect an NTFS filesystem on an external WD 1TB USB drive (detected fs as RAW), while chkdsk on Windows
    8.1 Enterprise WAS ABLE to detect the NTFS filesystem on the same external drive, and was able to repair it.
    So, what is the difference between these two systems? Why should the same version of
    any application yield different results between these systems?
    The only result on Windows 2012 Server was:
    C:\Windows\system32>chkdsk /x /f M:
    The type of the file system is RAW.
    CHKDSK is not available for RAW drives.
    The result on Windows 8.1 Enterprise was:
    Log Name:      Application
    Source:        Chkdsk
    Date:          11/26/2014 8:10:05 AM
    Event ID:      26214
    Task Category: None
    Level:         Information
    Keywords:      Classic
    User:          N/A
    Computer:      James-HP
    Description:
    Chkdsk was executed in read/write mode. 
    Checking file system on N:
    Volume label is WD 1TB.
    Stage 1: Examining basic file system structure ...
      57978 file records processed.                                                       
    File verification completed.
      2 large file records processed.                                  
      0 bad file records processed.                                    
    Stage 2: Examining file name linkage ...
    Index entry tsbyebye of index $I30 in file 0x29 points to unused file 0x3f.
    Deleting index entry tsbyebye in index $I30 of file 41.
      58026 index entries processed.                                                      
    Index verification completed.
    Stage 3: Examining security descriptors ...
    Cleaning up 9 unused index entries from index $SII of file 0x9.
    Cleaning up 9 unused index entries from index $SDH of file 0x9.
    Cleaning up 9 unused security descriptors.
    Security descriptor verification completed.
      25 data files processed.                                          
    CHKDSK is verifying Usn Journal...
    The remaining of an USN page at offset 0x1de7cb0 in file 0x3aa
    should be filled with zeros.
    Usn Journal verification completed.
    Correcting errors in the Volume Bitmap.
    Windows has made corrections to the file system.
    No further action is required.
     976759807 KB total disk space.
        234756 KB in 42 files.
           176 KB in 26 indexes.
        153755 KB in use by the system.
         65536 KB occupied by the log file.
     976371120 KB available on disk.
          4096 bytes in each allocation unit.
     244189951 total allocation units on disk.
     244092780 allocation units available on disk.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Chkdsk" />
        <EventID Qualifiers="0">26214</EventID>
        <Level>4</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-11-26T13:10:05.000000000Z" />
        <EventRecordID>11361</EventRecordID>
        <Channel>Application</Channel>
        <Computer>James-HP</Computer>
        <Security />
      </System>
      <EventData>
        <Data>
    Checking file system on N:
    Volume label is WD 1TB.
    Stage 1: Examining basic file system structure ...
      57978 file records processed.                                                       
    File verification completed.
      2 large file records processed.                                  
      0 bad file records processed.                                    
    Stage 2: Examining file name linkage ...
    Index entry tsbyebye of index $I30 in file 0x29 points to unused file 0x3f.
    Deleting index entry tsbyebye in index $I30 of file 41.
      58026 index entries processed.                                                      
    Index verification completed.
    Stage 3: Examining security descriptors ...
    Cleaning up 9 unused index entries from index $SII of file 0x9.
    Cleaning up 9 unused index entries from index $SDH of file 0x9.
    Cleaning up 9 unused security descriptors.
    Security descriptor verification completed.
      25 data files processed.                                          
    CHKDSK is verifying Usn Journal...
    The remaining of an USN page at offset 0x1de7cb0 in file 0x3aa
    should be filled with zeros.
    Usn Journal verification completed.
    Correcting errors in the Volume Bitmap.
    Windows has made corrections to the file system.
    No further action is required.
     976759807 KB total disk space.
        234756 KB in 42 files.
           176 KB in 26 indexes.
        153755 KB in use by the system.
         65536 KB occupied by the log file.
     976371120 KB available on disk.
          4096 bytes in each allocation unit.
     244189951 total allocation units on disk.
     244092780 allocation units available on disk.
    </Data>
        <Binary>7AE2000050000000550000000000000004000000000000000000000000000000</Binary>
      </EventData>
    </Event>

    Hi,
    Please check if the Windows Server 2012 is still UNABLE to detect the external NTFS drive after attach the drive from the Windows 8.1 back to the Windows Server 2012.
    A RAW filesystem simply means that it is a filesystem that is not recognized by Windows. The most common cause of external hard drives suddenly becoming RAW drives is if they are disconnected from a computer without using the “Safely Remove Hardware” option.
    You can use the Dskprobe tool (Dskprobe.exe) to make repairs to check it the issue still exist on the Windows Server 2012.
    What is this Raw File System
    http://blogs.technet.com/b/ganand/archive/2008/02/22/what-is-this-raw-file-system.aspx
    Best Regards,
    Mandy 
    If you have any feedback on our support, please click
    here .
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SQL Server 2012 Express on Window 8.1 64 bit version?

    Hi,
    I´m trying to install SQL Server 2012 Express on Windows 8.1 64 bit version. When I reach the point of "Installing Setup Files", of the installation process, the installation seems to halt. I´ve tried both the 32 bit and 64 bit versions of SQL 2012
    Express. I´ve installed SQL 2012 Express several times before on other Windows versions but I´ve never encountered this problem. Is it a known SQL Server 2012 Express/Windows 8.1 64 bit compability problem?
    Thanks in advance!
    Martin

    SQL Server 2012 express can be installed in windows 8.1 all you need to take care is that you meet
    hardware and software requirements . Please read the article in hyperlink carefully.Make sure you have internet connection because it is required. Make sure you meet all .net
    framework requirements
    Below link would be helpful as well.
    How to use SQL server on Windows 8 environment
    Please remove any previous failed installation of SQL server from add remove program. If you still face issue please refer to Solution section of
    this link for manual un installation.
    Finally you can locate log files present at location
    C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\summry.txt for details about log
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • How to RDP access my Windows server 2012 system with Windows 7 system

    In the VMWARE workstation, I have a " Windows server 2012" & " WIndows 7" OS deployed. I am not able to RDP the " Windows server 2012" from "Windows 7" system even though i have performed the below step.
    1. Enabled the " Allow Remote Connections to this comptuter " in windows server 2012
    2. Disabled the firewall in Windows server 2012.
    Can someone advice me on the below.
    1. How to RDP my windows server 2012 from my Windows 7 with " Firewall disabled" & "Firewall Enabled" conditions

    Hi,
    Just make sure that the firewall is disabled in all three profiles Domain/Private/Public.
    Create a incoming UDP rule on firewall to allow port 3389 and give a try.
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/b1ec4602-7120-4660-a1ba-e05289a479cf/windows-2012-r2-firewall-blocking-remote-desktop?forum=winserverTS
    Regards,
    Rafic
    If you found this post helpful, please give it a "Helpful" vote.
    If it answered your question, remember to mark it as an "Answer".
    This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

  • Server 2012 vs. Windows 7 / 8. What should a newbie choose?

    Hi there!
    Am here with a newbie question. Ive been running a Windows Home Server 2003 for several years, and learned alot had great use of it. But the hardware got old, and I wanted to buy a new server.
    So, right now I am running my new server with Windows Server 2012 trail, and I've had quite alot of difficulties. So after getting stuck with a Certificate Autority-something, am starting to really wonder if I'd rather should use Windows 7 or 8 to run my
    server. Then I dont have to understand all the extra stuff comming with the server edition, but the reason I have this is also to learn how to setup a server.
    What should I do? Everyone I know who's interested in server-management is using Linux, and am allways getting stuck with hours of googling, doing stuff that learn a bunch of, but takes me way too much time.
    I really wanna learn, but am getting a little fed up with getting stuck all the time.
    Just to mention it, am using my server mainly for http, php, mysql and ftp service, running file-sharing over my network, and stuff like that, but really enjoy the more advanced features I had on the server 2003 that I could experiment with.
    What do you think?

    Hi atomprompen,
    Besides the suggestion of using Windows 8 Professional, you may also consider to use Windows Server 2012 Essentials.
    Windows Server 2012 Essentials is the latest version of Windows Small Business Server. Windows Server 2012 Essentials is a flexible, affordable, and easy-to-use server solution designed and priced for small businesses with up to 25 uses and 50 devices that
    helps them reduce costs and be more productive.
    Also, Windows Home Server has seen its greatest success in small office/home office (SOHO) environments and among the technology enthusiast community. For this reason, Microsoft is combining the features that were previously only found in Windows
    Home Server, such as support for DLNA-compliant devices and media streaming, into
    Windows Server 2012 Essentials and focusing our efforts into making Windows Server 2012 Essentials the ideal first server operating system for both small business and home use—offering an intuitive administration experience, elastic and resilient
    storage features with Storage Spaces, and robust data protection for the server and client computers.
    For more details, please refer to
    Windows Server 2012 Essentials FAQ.
    We can also download
    Windows Server 2012 Essentials trial to evaluate it.
    More information:
    Windows Server 2012 Essentials Homepage
    Windows Server 2012 Essentials
    Hosted Windows Server 2012 Essentials
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

Maybe you are looking for

  • Using environment variable / double quotes in "Arguments" in "Server Start"

    I have an admin server, NodeManager, and 1 managed server, all on the same machine (windows). I am trying to enter something similar to this to the arguments field in the Server Start tab: -Dmy.property=%USERPROFILE%\someDir\someJar.jar But when the

  • Oracle forms 9i

    Hi Guys, i m getting difficulty in running forms9i demos as even though i have installed all the required components like forms 9iAS services. But still when i run 9iforms demo in explorer with servlet it doesnt show the forms.

  • Embedded swfs max number

    Is there a maximum number of swf assets I can embed in an fla using this syntax: [Embed(source ="../swfs/swf1.swf", symbol = "symb" )] var SWF1:Class; var swf1:MovieClip = new SWF1(); swf1.gotoAndStop(1); [Embed(source ="../swfs/swf2.swf", symbol = "

  • Formatted output in output_file

    Hello, String name = "Drabick"; int age = 22; System.out.print("%s%20d",name,age);Above can be used to write output in nice way, but I want to write output in separate file. BufferedWriter out2 = null;            try {                   out2 = new Bu

  • HT201068 why all videos from Chinese websites cannot be opened after the update??

    why all videos from Chinese websites cannot be opened after the Remote Desktop Client Update 3.8.2 v1.1??