Purchase or Manufactured Item

HI
How do we know if an item is a purchase or a manufactured item?
My second question is if an item is manufactured, how do we know its production BOM.
Thanks
Suraj

Hi
In the material master click on information button and check for the material type and the low level code.
Check in the material master purchasing view or in the material type (oms2 transaction) the following details pertaining to the procurement. If it is inhouse / exteranl. Also check for internal / external purchase allowed fields.
For BOM, check the low level code in material master and if it is other than 0 then it means the material is used in any one of the BOM.
Hope it helps.
Regards,

Similar Messages

Purchase order at item level in Invoice Tab 'GR-Bsd IV' want default

Dear Friends
While making Purchase order at item level in Invoice Tab 'GR-Bsd IV' should be came by default . what is its configuration setting.
Regards,
Mahes

Hi Mahesh try ME21N t-code

Display Purchase order, PO Item , Order Number ,entry sheet quantity ,entry sheet price ,invoice quantity, invoice price against each line number

hello all,
i have an ALV report requirement like this,
on the initial screen i have displayed(for a given agreement number like in ME33K )
in the selection screen i have taken agreement number as EKPO-EBELN.
purchase document number        item number        short text        target quantity      net price
5400000019                                  1                      xxx                  1.000                  304300.00
                                                    2                     xxxx                 1.000                  500000.00
the above fields i have taken from EKPO table.....
and on double clicking the item number i have displayed
line number          service number       short text           quantity    units    gross price   quantity released
1                           swr10                   xxxx                 2.00          kg          500             2
2                           swr11                    xxxx                5.00          EA         500             2
the above fields i have taken from ESLL (esll-extrow, esll-srvpos, esll-ktext1 , esll-menge etc......)
this i have done by passing EBELN to ESLH and getting PACKNO and passed this PACKNO to ESLL.
now my question is i need to display Purchase order, PO Item , Order Number ,entry sheet quantity ,entry sheet price ,invoice quantity, invoice price
against each line number above.....
from which table do i need to take these fields.....
please guide me....
thankq....

Thanks Andra,
The problem is the multiple invoices is for non goods receipt item so there will be no delivery.At the time of creating a PO the GR is not checked so there will be no delivery .
Also this setting is for invoices which are comming from Vendors.But if we are genrating the invoices manually it is not blocking those invoices.Also i there is nowhere mentioned in Incomming invoice to set tolerence for incomming invoice.Are you talking about Vendor tolerences?
Thanks in advance
Edited by: Metroid01 on May 14, 2009 6:52 PM

TS3297 iTunes store says: "Purchase of this item is currently not available. This item is being modified. Please try again later."

I'm trying to purchase an album via iTunes and I keep getting the message:
"Purchase of this item is currently not available. This item is being modified. Please try again later."
What does that mean? Why is it listed in the store if it's not available? When will it be available?
iTunes 10.7.0.21
Thanks.

It means it's being modified, try again later.
Sorry, but which part of that do you not understand?
Perhaps they're changing the price, so while they are doing that, you cannot buy it. It'll save you moaning later that you bought it and then the price went down. Or perhaps they've found that the album is faulty and so it has been removed until they can upload a non-faulty version. In either case, it will be available when Apple are ready to make it available. No one here knows when that will be.
Wait 24 hours and try again. If no luck, wait another 24 hours and try again. Obviously, Apple would prefer you to buy the song from them, so that's why it's still listed. But it's up to you how long you wait before deciding that you've waited long enough and you simply buy the album from another store. You have that choice, it's not compulsory to buy from Apple you know.

Purchase of this item is currently not available. This item is being modified. Please try again later.

Apple Support:
I have tried to purchase albums by Muse dated 2003 and earlier from the iTunes Store in Denmark.
For all of these I am getting the response:
"Purchase of this item is currently not available. This item is being modified. Please try again later.".
Well its been like this for one week now.
Is it still "being modified" or is it an access error that should not be there and that I am getting a misleading error message?
Apple please help !
Thanks,
Alex

All you can do is keep trying. It happens sometimes.

HT1849 "Complete Album" Problem - "Purchase of this Item is not currently Available. This item is being modified. Please try again later."

I am trying to complete an album of which I bought 3 singles and every time I hit "Complete Album" for $4.83, it says "Purchase of this Item is not currently Available. This item is being modified. Please try again later." Ive tried multiple times over the past week and get the same error every time. Can anyone help? Thx

All you can do is keep trying. It happens sometimes.

In Purchase Order Line item Maintaining Serial Numbers for Material Codes

Dear Gurus,
We have a business process in legacy system for Purchase Order like in PO line item, Material code with description, Quantity, unit of Measurement, Serial Number Start and Serial Number End is maintained, for example for Material code when we enter the data AXMLN00001 in Serial Number Start column, if the Qty 500 is maintained, by default system will calculate AXMLN00500 in Serial Number End column.
We understand that in standard SAP we donu2019t have this option of maintaining Serial Number Start and End in Purchase order Line item. Please let us know how this can be mapped and is it advisable to create two Z fields in EKPO table or else can we make any development.
Suppose if this is not possible in SAP for PO then in Banks if we want to place a order for Cheque books how we can maintain Start and End Serial Numbers to print in cheque books.
Also client is not agreeing to maintain manually Serial numbers in item text.
regards,
Dhanu

Aamir,
When the PO Item was created say for example Material had Valuation category "Y" and latter you wanted to change the category to "Y". Now system would have check for all open PO's etc...based on this you must have set Deletion Indicator to this Line Item to allow valuation category change in material master. Now when this Item got created in the table level (EKPO), system updates the valuation category "Y". Currently this valuation category is not active so it would not allow you to perform removal of deletion indicator as program cannot automatically nor you have an option to manually update the valuation category to this Item.
Regards,
Prasobh

Free of Charge indicator in Purchase Order / Line item

Dear All,
Is there a table where i could locate if a particular purchase order / line item has the FOC tick maintained. I went through quite a few tables and am unable to locate the same.
Or is there any other logic from which i could derive if a particular Purchase Order / Line item is FOC or not.
Shall await a reply
thanks
shabeen buhary

Dear,
The 'Free Items' indicator in the overview is only used to facilitate the switching off of the Inv.Receipt flag and the GR-based IV flag.
Note that the 'Free Items' indicator is not stored on the PO item table EKPO.
The Inv.Receipt flag (and the GR-based IV flag) are the fields that really controls if an item is 'free' or not.
So, the field is initiated based on the values in those fields rather than from input from the user.
When an invoice is expected it's not a free-item. This indicator invoice receipt is chosen from the main-item and also from the
customization maintained for item category 0 in table T163.
Regards,
Syed Hussain.

MM: Purchase requisition line Items - How many line items can we use

Hi all,
1. Purchase requisition Line items (How many line items can we use?), is there any restrictions.
2. While creating PO with only one tax code for the related PR to input Tax code (without selecting line Items).
Regards,
Sudheer

Hi
There is no limitation for number of items in PR.
Tax code is always applicable for individual item only.It cannot be selected form the whole PO.
Regards
Dev

Purchase requisition with Item Category – L creation via Maintenance orders (Plant Maintenance)

Hi Guru’s,
I have a scenario where purchase requisition with Item Category – L (subcontract External) for Repair items (Storeroom Process) need to get generated with Item category-L.This requirement is to MAP in my system.
I am aware that purchase requisition can be created with reference to maintenance orders.
Can anybody through some light on the integration between PM and MM.
If creation of purchase requisition is possible via maintenance orders then please explain me with detailed steps both configurations and master data so that I can able to replicate the same as per business requirement.
I look forward to the expert’s response.
Regards,
Kumar

Hi Kumar.S
You have to installed DIMP 6.0, and activated the business function Refurbishment and Subcontracting (LOG_EAM_ROTSUB) and Serial Numbers in Purchasing (LOG_MM_SERNO) .
Please check the below link:
http://scn.sap.com/thread/1956895
Hope it will help you to resolve your issue.
Regards,
Ritesh

Purchase report of Items Having Landing Cost

Hi Experts,
I am in a urgent need of help form you experts.!!!
We are involved in Import of goods.
As you all know, import purchase means
Purchase Order- GRPO- Landing cost
now, i want the actual cost of purchase for every Item based on every transactions.
Hope i furnished necessary information, any clarification and here to reply immediately.
Thanks in advance,
Dwarak

Hi,
You can try this
select g0.DocDate , n0.seriesname + LTRIM(str(g0.docnum)) as GrnNo# ,
g0.cardname as Supplier_Name, G0.NUMATCARD , c0.city , c0.state1 , C0.COUNTRY ,
SUM(g1.QUANTITY) AS Qty , g0.DocTotal as grntotal ,
n1.seriesname + LTRIM(str(l0.docnum)) as LPNo# ,
l0.doctotal as Landed_Cost
from OPDN g0 inner join PDN1 g1 on g0.DocEntry = g1.DocEntry AND G1.TARGETTYPE <> 21
LEFT outer join ipf1 l1 on g1.DocEntry = l1.BaseEntry and l1.LineNum = 0
left join OIPF l0 on l0.DocEntry = l1.DocEntry
and l0.DocDate >= '01/apr/2010'
and l0.DocDate <= '31/mar/2011'
left join NNM1 n0 on n0.Series = g0.Series
left join NNM1 n1 on n1.Series = l0.Series
left join OCRD c0 on c0.CardCode = g0.CardCode
where g0.DocDate >='01/Apr/2010'
and g0.DocDate <= '31/mar/2011'
group by g0.DocDate , n0.SeriesName , g0.DocNum ,
g0.CardName , G0.NUMATCARD , c0.City , c0.State1 , c0.country ,
n1.SeriesName , l0.DocNum , l0.doctotal , g0.doctotal
order by g0.DocDate
this will give you GRPOs for a particular period with reference to the Landed cost based on that.
Hope this will help you.
Thanking you
Malhaar

What`s wrong with this message "purchase of this item is not currently available"

what`s wrong with this message “purchase of this item is not currently available”,I test my app with sandbox,it always told me this message from this morning,but it was all right last night.

This appears to have been resolved over the weekend. A sandbox status page would be useful. The sandbox does have frequent problems, resulting in quite a lot of lost development time.

Deleting Purchase Order Line items

Is it possible when you delete a purchase order line item using ME22n to have the corresponding purchase requisition line item marked as closed or deleted?
Currently when we delete the PO line item we get the message that the "Requisition quantity XXXX open again" . We have purchase requisitions converting to purchase orders via ME59N on a schedule batch job, so the req gets converted to a PO again if it is not deleted quick enough.

Hi Gary,
In MRP related PR to PO or without MRP also, whenever you convert a PR to PO and then delete an item from PO, the corresponding PR gets opened automatically - and its standard. This is logical also, because sometimes the person creating PR is different from the person creating PO. And If a PO item has been created synchronous to PR item, then its deletion must also be sysnchronous.
I hope this answers your querry.
Regards,
HKV...

Price changes in Purchase order Line Items its displaying as"WF-BATCH"

Hi Experts,
I need some Information about Price changes in Purchase order Line Items,In PO Documents Price changes through this wf-batch has changed the value of this row to xxx.xx USD, which does not correspond the invoice.
If i selected the Item changes in the Purchase Order its displaying as"WF-BATCH".
So please try to clarify where this batch originates from.
Brgds,
RK

Hi Jurgen,
Thanks for your reply.
But how i can check this in Purchase orders,on what basis this price changes information is recorded in PO Line Item level.
can you pls guide me some steps to check the price changes through WF-BATCH.
Brgds,
RK

Purchase order text(item text)

hi,
where does the purchase order text (item text) is stored for standard transaction ME21N.
thanks & regards
Prajwala

Purchase order item text is stored as long text in STXH.
use read_text FM to see the text.
Paramters:
Text Name      "Concatenate PO number + item number " Key of EKPO.
Language        ES
Text ID         F03 Material PO text
Text Object     EKPO       Purchasing doc. item te

Purchase or Manufactured Item

Similar Messages

Maybe you are looking for