Purchase order 6200018790 has no items

Dear SAP Professionals,
I encounter the following problem when I do the Goods receipt from TAC MIGO. The purchase order is fine and have no issues. Kindly let me know what to check in the PO when we receive this error.
Purchase order 6200018790 has no items
Message no. M7033
Diagnosis
The system has not found any order items in the purchase order 6200018790.
Procedure
Make sure your entries are correct.
If the purchase order number has been incorrectly specified in your reference document, you can search for the correct number with the search functions.
Thanks and Regards,
SZ

this can cause of any of the following reasons:
pls check,
whether the po is released?
whether there is any confirmation control in the po?
check the delivery date.
whether the items in the po is still open?
regards,
indranil

Similar Messages

Error: Purchase order 4500000830 has no items in mb1b 541

Hi All,
I have created a Sub contracting Purchase Order with ITem Category L and Account Assignment E.
Now iam getting problem while issuing Stock to Subcontractor thru MB1B 541 Mov type. It is throwing error like Purchase order 4500000830 has no items.
Scenario is My client creates pos based on Sales order only. Now he want to Issue stock to Subcontractors based on sales order.
for this, I created Semifinished material, two raw components, Sales order for Semifinished material and maintained bom for semifinished.
Please go thru this and suggest.
Reg,
Ashok

Hi,
Did u checked the link provided by me. As per SAP, it is not possible to post 541 stock of material provided to vendor in subcontracting with account assignment sales orde or project stock.
If you want to differentiate, use a separate storage location and transfer the stocks there. When you do the GR, the components issue happens directly from your storage location from sales order stock.
Since the components are not transferred to the "stock of material provided to vendor", we recommend that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the sales order stocks and project stocks.
If you want to provide material from your stock,
For components that are managed in sales order stock or project stock, you can define whether the components are to be withdrawn directly from each sales order/project stock or from the stock of material provided to vendor. You manage this via the dependent requirements indicator for individual customer requirements and collective requirements (MARC-SBDKZ).
You can maintain this indicator in the following places:
in the MRP view of the material master record (MRP 4)
in the explosion types for the BOM item (in Customizing for Production in the step Basic Data -> Bill of Material -> Item Data -> Define explosion types)
Configuring the explosion types has priority over the configuration in Inventory Management.
If the indicator is set at Collective requirements only (2), the materials are withdrawn from the stock of material provided to vendor. If this indicator is set any other way, the system withdraws materials from sales order stock or project stock.
Regards,
Ramakrishna

Purchase order 4500003445 has no item error is comin

hi all,
created one PO, then created Invoice with refrence to PO, After doing MIRO, I am trying to do GR with refrence to PObut system is showing error purchase order 4500007834 has no item.
Gr based invoice is uncheck.
vendor aknowledgement is unchecked.
please guide
regards
vb

Hi,
1. check GR non valuated is checked or not .
2. in confirmation tab, check if there is inbound deliv ery or rough GR seleted or not

Purchase order still contains faulty items

Hi ,
While creating Purchase Order through BAPI I am getting the error : purchase order still contains faulty items
How to rectify that?

hi
try checkur BAPI
also check u have given all details
try creating the po in ME21n normally ,which fields ur filling in this then compare it with ur BAPI process
regards
kunal

Error : Purchase Order Response for Service items Different

Hi ,
We are getting Error : Purchase Order Response for Service items Different , when creating the PO in SRM 5.0. what must be the reason ?
Thanks & Regards,

Problem solved

Purchase Orders for special/controlled items

Hello everyone:
I'm trying to create an aproval process for Purchase Orders that include special items that:
- we only buy when one of our customers needs them (non-stock items),
- have had no activity for 60 days or more,
- and/or items that don't have a customer PO.
I've "marked" these items using the item's properties, so that part is covered, but the interactions with the other tables is the problem, I've tried using ORDR, RDR1, OITM and OPOR, but I think I'm creating a "monster" and on the last query I created (with help from Gordon Du I think) to use for an approval process, ended up just giving "TRUE" of "FALSE" as a result, and I can't really imagine how to get a simple "TRUE" or "FALSE" from the 3 requirements I have for this query...
Any ideas?
Thanks in advance
Hugo Castano

Hello Hugo Castano,
Please post it on the SAP Business One Core forum instead of here. This forum is focused on SAP Business One System Administration.
Thanks,
Gordon

When we create a Purchase order that has PIR in line item, the text is stored in EINA or EINE?

Hi Friends,
I have a requirement that, whenever we created the PO that has PIR in line item, the text is getting stored in EINA or EINE table.
so here the businees need to move the text which storing in EINA / EINE to ekpo text id up on saving.
please suggest how i need to proceed with this issue.
Thanks in Advance,
kasi.

Hi Madan,
Thank you for your reply.
As per your suggestions I found BADI ME_PROCESS_PO_CUST.
Could you please help me how to read the "Info record PO text" for each line item in the purchase order and i want to save the readed text into EKPO-txz01.
Thanks in Advance,
kasi.

Purchase order for a line item

Hi Guys,
             I have got the following business sceanrio.
I have got a material "A" which can get from locally or can get from 3rd party also.
In the sales order i have entered like following.
Line item no. Material     Qunatity     Item category
        10             A              100
        20             A              500
As only 100 quantity is available in my stock i want to go with 3rd party for line item 20.
How can i go ahead in this scenario.
What would be the item categories for two line items?
If i go with Purchase order for line item 20. Where in sales order i can track that, Line item 20 is getting thru Purchase order, My requirement is to store the corresponding purchase order no for each line item getting from 3rd party (STO also).
Thank you
Anil

Hi Anil,
For delivery from stock use the item category TAN
For procuring it from Vendor use the item category - TAS/TAB
Check whether the ITEM CATEGORY GROUP & GENERAL ITEM CATEGORY GROUP for Material B is BANS/BANC & the Material type is HAWA.
Once you get the item category TAS/TAB, in sales order save it and go to Change to mode of the Sales Order then you can see the purchase requisition no in the Schedule line tab. Based on this Purchase Requisition a PO is created.
After you save the PO note down the PO number and then raise Goods Receipt (MIGO) with reference to the PO number.
Now you can goto MMBE and check the Stock for Material B.
Reward if helpful.
Regards
PAVAN

Purchase Order creation for TAB item

Hi,
I used TAB item in the Sales Order. Then I created Purchase Order(ME21n) using that Purchase req number. Then I went to ME23 and did goods receipt from the menu and clicked the item OK. Saved.
Now when I tried to do delivery for the Order, its saying the stock is not there.
I see the PO in the Doc Flow.
Please help. Let me know the steps to create PO and delivery for this TAB item.
Will reward point for a good reply
thanks

yes I did.
I used the confirmed schedule line as the delivery date in VL01n
It is saying ZERO stock is available
I can see my stock with type E for this Order in MB51
Not sure why it is not allowing me to created delivery.
Is it some storage location problem or sth? This is in testing Environment. I guess Production is working but I compared Material Master Data and POs from Productioni to testing.
I don't see anything different.
need help
thanks

Purchase order - error in deleted items

Hi all,
I have the following situation: when changing an existent purchase order, if I have a deleted item with an error, the system doesn't allow me to save the purchase order if I don't correct the error in the deleted item.
I have a requirement for the client to suppress this behaviour.
Any ideas on this?
Thanks in advance.
Best regards,
Sónia Gonçalves

Hi,
First of all, thank you all for your answers.
I got this from SAP:
"As per system design, the PO item must be free of errors before you can save it (even if it is deleted). This is to ensure that no error appears suddenly if the PO item is later undeleted. SAP generally
allows saving only if the entered data is consistent, so that it does not cause unexpected errors later"
I have a requirement to suppress this behaviour, since the client doesn't understand why they have to correct a deleted item.
Any ideas on a user-exit ou badi where I could ignore this validation and how?
Thanks.
Best regards,
Sónia Gonçalves

ME28- purchase order is proposed althoght items are deleted

hi
i have the following problem:
A purchase order in our production system is proposed again for release after all items were deleted.
I want to know why its happend and a way to resolve this problem
Thanks in advance for your help
Enzo
Message was edited by:
        enzo francescoli

thanks for your soon answer.
I dont understand what you are proposing me. What i want to know because the PO continues appearing to be released if the same one were deleted.
Some of this PO before being deleted, they were released, but know still apearing.
thanks for your help, and if you can explain to me with more datail i will thank for it.
Best regards
Enzo
Message was edited by:
        enzo francescoli
Message was edited by:
        enzo francescoli

Table which contain Purchase order number, PO line item, PO type

Hi experts,
Can you please tell me which table contains the fields Purchase order number, Purchase order item number and purchase order type with respect to the fields of the table MKPF--MBLNR.
I am given a conditon where i have to select MBLNR, VGART, BLART from MKPF and after selecting these line items, i have to validate for purchase order of type ZSPM,ZSFIAND ZINS.
Can you any one suggest me what shall i do... Thanks in advance.
Regards,
Buvana

Passing MKPF-MBLNR to MSEG
get the EBELN (Purchase order).
Pass this EBELN to EKKO to get Order type (BSART)
and to EKPO to get the line item.

Customer Purchase Order Number in line item and F.27

Hi Experts.
I was just wondering if its possible to populate customer purchase order number (entered in sales order) in line item, so that I can use in customer statement in F.27.
The requirement is to populate customer purchase order number in customer statement (F.27) which is sent to the customer at month end.
Is there a some other better way to do, please advice.
Thanks in advance
Best Regards
Jen

Based on my experience std feature from SD-FI . Depending on the SD Billing config which can be by delivery(VTFL) or sales order(VTFA). You can assign options of A: Cust PO No. B Sales order no. C Delivery no. D External delivery no. E Actual invoice number to available header fields of Assignment No. or Reference No. Try it out

Purchase Order With Different Warehouse Items

I have problem in creating the purchase order for the items belonging to 2 different warehouses.
When I create the Purchase order it shows the error as
Cannot retrieve tax information message [80508-2]

Hello,
No, I am referring to warehouse setup --> general tab.
Are you creating one item that will be received by 2 warehouses or more items and more warehouses ?
actually the error can be caused by tax group setup in item master data and business partner. Check also field tax information in the module admin --> system initialisation --> accounting tab. maybe you forget to define the tax info there.
Rgds,
JM
http://groups.yahoo.com/group/SBO_Knowledge_Village
[email protected]

Goods receipt reference to Purchase Order non-material master items

Dear all,
Platform: SAP R/3 4.7
I'm working in my customer environment whereby the purchasing scenario is as follows:
1. Create a normal PR me51n -. enter material description for the item to purchase, qty, price, plant and etc. My customer doesn't maintain material master for their items.
2. Create a normal PO me21n with reference to the PR. The information from the PR is automatically copied to the PO.
3. They receive the physical item and now it's time to perform GR.
My question:
Can I perform GR with reference to PO since the item in the PO is not from the material master, meaning there's no material # maintained for that item? I'd like to record the items ordered into the plant.
Thanks.
Steven
Edited by: Steven Khoo on Jul 22, 2010 3:15 PM
Edited by: Steven Khoo on Jul 22, 2010 3:16 PM

Hi Shubham,
"Hi,
Yes always you can make GR against of PO irrespective of material master maintained or short desription, which is commonly called non codified material.
Ccan be procuured against Account assignment ( cost center) which have to eneter in PR/PO in the account column then material group, which is mandatory field with this G/R/IR clearing account will get triggered during GR which is debit entry & GL which is maintained in the PO with the combnination of cost ceneter will be the Cr entry. Hope this helps you."
I'm still kind of confused. Normally, if a material master is maintained for an item, under accounting 1 view, we assign a valuation class. During GR, it will hit transaction key in OBYC - BSX and the system will be able to locate the corresponding GL account # mapped to that valuation class in the material master.
Now, for this "non codified material" you mentioned, how does the R/3 know which GL to assign? There's no accounting view for it since it's just a text description. This is where I'm really confused.
Thanks.
Steven

Purchase order 6200018790 has no items

Similar Messages

Maybe you are looking for