Purchase order can not partial receipt

HI Experts,
When i am make gr for Account assigned (K) purchase order.i am getting below error msg
already the made the GR for 200 quantity
Po is created without material no
Item 000010 is not relevant for goods receipt; increase quantity to 2,000.000 EA
Message no. BORGR634
Diagnosis
This item is not relevant for goods receipt. The quantity to be posted has to be the same as the delivery quantity.
It is not possible to post a partial quantity for this item.
Procedure
Increase the quantity of this item until it equals the delivery quantity.
Please suggest
Regards
VR

Hi,
Already Goods reciept is over against this PO.
You can check this by
me23n -> Item level -> Purchase order history -> click on Material doc.
Regards
R

Similar Messages

  • Goods receipt for purchase order is not allowed

    Hi,
    When I am doing the PO receipt i am facing the error message "Goods receipt for purchase order is not allowed WBS element xxxxxx"
    What could be the problem
    Thanks
    Lucky

    Hi,
    Please check the WBS element in CJ03, in Basic Data, System status,
    Is the WBS is not released or blocked.
    Hope it helps you.
    Thanks

  • Customisation settings for VC Configuration copy from Purchase order to GRN(Goods Receipt note)

    Hi Experts
    I was looking for Customisation settings for VC Configuration copy from Purchase order to GRN(Goods Receipt note),
    Please share.
    Regards
    Sandeep

    Hi Ritesh
    Thanks for your reply,
    I checked  both of these transaction  we need to select 3 option Characetrstics frm configuration(prio) and classification. I will check that, I had one more question
    In PO VC configuration is called for class type-300  and  in GRN VC configuration  is called for class type -023. How it will fetch the variant class configuration to Batch class configuration?
    Once we had faced some issues the copy from PO to GRN was happening for some batches & some batches it was not happening.
    yes we have activated Mill Functions in our ERP box.
    Regards
    Sandeep

  • Purchase order yet not released

    Hi sap gurus,
    i have done purchse order .then i am creating goods receipt for that purchase order but i am getting these error purchase order yet not released.plz tell me how can i solve these problem

    Hi Prasad
    Its simple prasad ur PO is suject to release strategy (Approval process) so the authorized person has to release the PO through the following process -
    Just go to Transaction ME29N or ME28, enter ur PO no.
    If u follow ME28 give ur release grp / code enetr PO no. and execute ur PO will be reflected in the list put the cursor there and press Release+Save Iconit will release the PO and then u will able make the GR.
    If u follow ME29N then give ur PO no. and go to release tab at the header level and press release icon.
    Best regards
    Vineet Baweja

  • Error of PO - "Purchase Order Does not exists"

    Dear Experts,
    Here i am facing one error of Purchase Order Creation and its further processing.
    I have created purchase order and saved it, system issued message that, Purchase Order XYZ is created. (I have taken trial for 2-3 Purchase orders).
    When, i am posting Goods Receipt for the PO, system is issuing the error message, Purchase Order does not exists.
    Also in ME2M (PO list display) and Me23N (Display PO),
    system is issuing the same message - Purchase Order Does not exists, but in PO Creation it is generating Purchase order normally.
    Here is no matter of release strategy, because, PO release is not configured.
    Dear Experts, Please guide me on the issue !
    Thanks in advance !!!!

    there can be hundred of different reason for a failure. Most common reason is a problem with the number ranges, e.g. system tries to create a record with a number that is already there.
    This can happen if the number range was reset (or transported from a developement system).
    But transaction SM13 gives you all the details.
    There you see a line for each posting failure. Double click this  line again to get more details.
    There you will certainly find a line in red that indicates in which function the failure ocured.
    Double click this red line to get more info. Use the buttons above to see the content of the posting. For some failures you can create a dump that gives you much more details.
    Best you sit together with an ABAPer who can certainly tell you more how to read a dump and how to find the reason.

  • Document is in transfer for purchase order.Creation not possible

    Dear All,
    We did partial confirmation in EBP and later when trying to do confiramtion for the remaining quantiy getting the message"document is in transfer for purchase order.Creation not possible"
    We are taking this problem in production as well as in quality systems also.
    What are possible reason and how to solve it.
    kindly share your views.
    Thank you.

    Hi yshu,
    use tcode bd87 in SRM to check for failed confirmation IDOC (type MBGMCR).
    The double click the status record to see the exact cause of the failure.
    Rectify the error. Then try to execute the IDOC from BD87 tcode.
    For a few errors you may not be able to execute the IDOC but to create a new confirmation in SRM. In such cases, follow the below procedure..
    There should be an entry for the confirmation in the transfer table BBP_DOCUMENT_TAB in SRM. Display the details.
    Then run FM "BBP_DELETE_FROM_DOCUMENT_TAB" to delete the entry from the doc tab table.
    Then post a new confirmation in SRM.
    There is also a FM in SRM using which you can change the status of thefailed IDOC from 51 to 68 or 31.
    Rgds,
    MJ

  • Purchase Order Response Not able to do by the Supplier from SUS

    Hi Experts,
    During sometimes, the supplier is not in a position to make POR from SUS.
    After selecting the PO from Supplier side, when they are trying to do POR they are not able to either select Confirm (tick mark) or reject (X mark) from their screen which means always those buttons are in greyed mode or no action like Green or Red respectively. What could be the reason ? However, they can see the Send button.
    Please provide me the input to do investigation.
    Thanks
    Rajesh K

    Hi Rajesh,
       If you are not able to respond for PO from SUS then you have to activate the workflow WS14500001.. Here some more workflows you can check for POR
    Workflows
    You can configure the following workflows for the purchase order response:
    ·        (WS14500001)
    Automatic transfer of purchase order response data into the purchase order. The system carries out a comparison during the data transfer (background processing). If the quantity, price, and delivery date variances transmitted by the vendor are within the tolerance limits set in Customizing, and no other variances are transmitted, then the data transfer of the first inbound POR occurs automatically.
    This workflow is relevant for XML receipt or manual entry with subsequent approval.
    ·        (WS14500019)
    If POR data differs from that in the purchase order, you can be informed of this via a work item. As a purchaser, you can decide for each item whether you wish to transfer the data into the purchase order or not.
    ·        (WS14500007)
    If POR data differs from that in the purchase order, you can be informed of this via e-mail (with the number of the purchase order).
    ·        (WS14500017)
    Monitoring receipt of the purchase order response:
    If the flag Purchase order response expected is set in the purchase order, and if by a certain time a purchase order response has not been received for all items in a purchase order, then you can be informed of this via a work item.
    SAP WON'T DELIVER ANY WF TEMPLATE WITH NUMBER RANGE OF '9' BECAUSE 99% CUSTOMER USE NUMBER RANGE 9' FOR CUSTOM WORKFLOW..
    Saravanan

  • Report with open Purchase orders and open Goods Receipt (without invoices)

    Dear All,
    We require a report in purchasing which will show:
    1. open purchase orders
    2. open goods receipts
    We do not want POs and GRs that have been created into invoices to be included in the report.
    At the moment we tried ME2N with RECHNUNG in selection parameters but it includes invoices. We have tried other selection parameters and reports but the results are not helpful.
    I have also checked SDN but there is no correct answer. Most of them specify the ME2N with RECHNUNG as a solution but this does not work for us.
    Any help would be appreciated.
    G.

    Hi,
    Try ME2N, Select WE101....Also Select ALV
    go to next screen....Go to change layout
    Select to be deliverd(Qty) and Value, also to be invoice(Qty) & Value.
    Hope Help U!
    Regards,
    Pardeep Malik

  • MIGO error 'Purchase Order does not contain a confirmation control key'

    Hi,
    while posting GR to a PO i am getting an error ' Purchase order XXXXXXXXX does not contain a confirmation control key'
    it is true that i have not defined any confirmation control key in PO, Aknowled rerd checkbox is also not ticked
    Still why this message coming, what setting would be bringing this message
    Please clarity

    Hi,
    Until the installation of Note 589422 (with SP SAPKH46C43) you could  due to a program error - create a delivery even though the purchase order did not contain any confirmation control key.                                                                               
    This is now prevented through error message M7394. The transfer of this check (Confirmation control key existing in the purchase order, see Note 589422) was necessary as otherwise you could post a purchase order as desired. (Refer to also Note 616944 -> SAPKH46C44)
    589422 Several inbound deliveries can be created with MIGO :                                                                               
    "Implement the program correction.                                       
    With Transaction SE91 create message M7394 with the message text:        
    Purchase order & & does not contain a confirmation control key".         
    After you implemented this correction, when you want to create an        
    inbound delivery with Transaction MB01 or MIGO or with                   
    BAPI_GOODSMVT_CREATE and if the purchase order does not contain a        
    confirmation control key the system displays error message M7394         
    "Purchase order & & does not contain a confirmation control key".                                                                               
    Hope this can explain the error you met.
    Regards,
    Mauro

  • Document in transfer for purchase order - creation not possible

    Hi Experts,
    we get this error when we do confirmation"'document in transfer for purchase order - creation not possible'"
    any inputs are appreciated
    Rg
    sam

    Hi All,
    We have resolved the above problem.
    When user does confirmation ,if it sucessfully  created then there will be  no entry in BBP_Document_tab table.If it's in error in process and next time when user tries to do GR then he will encounter a pop up message "Document in transfer for PO, creation not possible".
    So we need to delete the entries from table BBP_DOCUMENT_TAB using FM BBP_DELETE_FROM_DOCUMENT_TAB.
    Then check again in BBP_DOCUMENT_TAB now there will be noentry there...so now user can do the confirmation from SRM,he will not encounter this error now.
    Thanks to all the ppl who has replied
    sameer

  • Purchase order Item note

    Hi,
    I am displaying a Purchase order report. I need to display the Purchase order Item Note.Using read text i am unable to find out can any one suggest me how to find out.
    Regards,
    Raghu

    Try below code
    data : it_address type table of tline with header line.
            call function 'READ_TEXT'
              exporting
                client                  = sy-mandt
                id                      = 'F01'
                language                = sy-langu
                name                    = <CONCATENATE PONUMBER &PO LINE ITEM>
                object                  = 'EKPO'
              tables
                lines                   = it_address
              exceptions
                id                      = 1
                language                = 2
                name                    = 3
                not_found               = 4
                object                  = 5
                reference_check         = 6
                wrong_access_to_archive = 7
                others                  = 8.
    Regards
    Vinod

  • Purchase orders pending of goods receipt.

    Hello,
    Is it possible to obtain the list of Purchase orders pending of Goods Receipt?
    I need to know the third party P.O pending of goods receipts.
    Is there any program?
    Thanks in advance,
    Ricard.

    Hi oscar
    You can list of Purchase orders pending of Goods Receipt by Tcode ME2N and select field
    Source of list - ALV
    Selection parameter - WE101
    As per your requirement Assign Plant and Compnay code.
    Just execute.
    it list list all po whose gr is pending
    Regards,
    Vraj

  • Without Purchase Requistion , Purchase Order should not be raised

    Dear All,
      Can any one tell me , How can i do the setting without purchase requisition , purchase order should not be raised.
    Regards
    Suresh

    Hi,
    1. Transcation code : OMET - Function authorization
    in that, there is one check box called REF TO PURCHASE REQUISTION under the section of possible reference object (2nd from top). Activate this check box.
    Assign this Function authorization key to the user profile.
    Now onwards, this specific user cann't create PO with out PR. 
    PR is mandatory for the PO creation for this user only. But other users can create PO, with out PR also.
    This is user level control
    2. Transcation: OMEC
    Select your document type and   note down some where filed selection key which is maintained for your document type.
    Transcation code :OMF4
    Navigation path : Spro-Materials Management-Purchasing-Purchase Order-Define Screen Layout at Document Level
    Select field selection key, which is identified in the first step and click on the details icon.
    Click on the "Reference data, item"
    set Purchase requisition as required (mandatory) entry.
    Now onwards, you cann't create PO with out PR number.
    This control is applicable for all the users. But for your document type only, which is used in the first step.
    For what are the document types used this field selection key, you can't create PO with out PR number.
    For other document types you can create PR with out PR number also.
    Regards
    KRK

  • Purchase reqisition header note not copying to Purchase order header Note

    Hi
    can you help me any body  regarding this issue
    "purchase reqisition HEADER NOTE  not copying to Purchase order HEADER NOTE " .
    it is very urgent issue for me please.
    Thanks
    Madhu.

    hi madhu
    ans1.)  in ECC 6 it is not possible to copy PR text to PO text , becouse the only way to convert PR into PO is document flow and document flow will show you only line items.
    ans 2 )  PR text is used for maintaining text related to PR genration information , like which MRP run is giving this PR or other information which user wants to maintain .
    ans3.) if user have done same thing earliar then it may possible that he was using 4.7 or ECC 5  .
    let me konw what user is saying .
    regards
    ravikant dewangan

  • HT1933 I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my bi

    I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my birthdate on two of the accounts. Apple can not send me email with a password authorization on several current accounts that I have with them. How can I contact Apple with this annoying problem I can not fix.

    settings - app/iTunes store - sign out and sign back in with your new id.
    Note - if your older apps needs an update it will use your old apple id and password, as Apps are tied to the apple id that was used to purchase it.
    You can't merge apple id.

Maybe you are looking for