Purchase order creation problem.. me21n
Hi All,
I have the following requirement in creation of PO.
When the Purchase Order of some type, say for eg. in my case its a custom type ZNB denoting intercompany pricing is created from a Purchase Requisition, the system should check the Account Assignment Category of the Items in Purchase Requisition. For the Item that has an account assignment category 9 indicating that the item is for free ( for eg. if a cylinder of chemical gas is considered , them the cylinder/ container should not be billed ), the flag Free should be ticked for this particular item. As a result the Pricing will not be applicable for such an item.
I would like someone to please throw light on how this can be achieved. is there any user exit to get this done ?
Thanks in advance ..
Sharat.
Hi Sharat,
the Badis ME_PROCESS_PO_CUST & ME_PROCESS_PO may be helpful to u...
Similar Messages
-
Purchase order Creation Problem
Dear All
For Local purchase NB order creation SAP Asking the Account assignement category.
for only particular plant ,It should ask only Service orders. but why its asking the NB orders.
Even Valuation grouping code already assigned for that plant.
Any other settings required..
Please guide..
Regards
KumnarDear All
For Local purchase NB order creation SAP Asking the Account assignement category.
for only particular plant ,It should ask only Service orders. but why its asking the NB orders.
Even Valuation grouping code already assigned for that plant.
"System Throughout the error "Account assignment mandatory for the material 200011"
The material type is verp. and accounting view already extented for this plant
Any other settings required..
Please guide..
Regards
Kumnar -
Regarding purchase order creation using me21n
Hi,
I want to set default values for Purch. Org for a document type PO:Service-FREIGHT in me21n transsaction.
which userexit or badi can be used for this?
When a document type PO:Service-FREIGHT is entered, Purch. Org should have deafualt value set automatically..
Through 'Personal Settings' it is possible but it applies for all document type..& I need it for dot tytpe
PO:Service-FREIGHT .
Thanks in advance...Hi
Go to me21n transaction.
click on personal setting icon.
Once that is done -select default balues tab.
And you can save the settings here.
Check out this link:
http://home.netlinc.org.uk/ContentStore/__Public/Documents/0022100/22147/C2-C4%20ME21N%20CREATE%20PERSONAL%20SETTINGS.pdf
Regards
Neha -
Purchase order creation - Account assignment group C (Sales Order)
Hello Gurus
During the purchase order creation in Me21N, account assignment category C (sales order) is available. In which scenario we will use it. When I assign C system is asking for a GL account. Why system needs a GL account, and how the posting will be at the time of goods receipt. Thanks for your help in advance.Hi,
Creation of Purchase Order with t.code: ME21N with account assignment category C (sales order) is used for Time and Material Expenses with third party scenario and you need to enter sales order number and respective G/L account . In this scenario 1st a sales order is created with a material( material created DIEN material type) & then purchase order created with respect to sales order.
Here you provide service to your customer and this service you procure from your vendor, you just play middle role for providing and getting service.Standard DIEN material type designed for Sales usage only, so you create sales order for service material.Service master is used to get service from vendor with item category D with proper account assignment category as C
Example:
Material type DIEN is used for when you offer "SERVICE" to your customer.( The steps are (VA01,VF01,VF04,F-28), If u used HR module( you can used with sales order with t.codes are: CAT2,CATS_APPR_LITE,CAT7,PR05,PRRW,PRFI)
Service Master records(AC01)ESM is used when you procure "SERVICE" from your vendor.( Steps are: ME21N with Item Cat. "D" with Acc. ***. Cat. "C", ML81N,MIRO & F-53).
Regards,
Biju K -
Document is in transfer for purchase order.Creation not possible
Dear All,
We did partial confirmation in EBP and later when trying to do confiramtion for the remaining quantiy getting the message"document is in transfer for purchase order.Creation not possible"
We are taking this problem in production as well as in quality systems also.
What are possible reason and how to solve it.
kindly share your views.
Thank you.Hi yshu,
use tcode bd87 in SRM to check for failed confirmation IDOC (type MBGMCR).
The double click the status record to see the exact cause of the failure.
Rectify the error. Then try to execute the IDOC from BD87 tcode.
For a few errors you may not be able to execute the IDOC but to create a new confirmation in SRM. In such cases, follow the below procedure..
There should be an entry for the confirmation in the transfer table BBP_DOCUMENT_TAB in SRM. Display the details.
Then run FM "BBP_DELETE_FROM_DOCUMENT_TAB" to delete the entry from the doc tab table.
Then post a new confirmation in SRM.
There is also a FM in SRM using which you can change the status of thefailed IDOC from 51 to 68 or 31.
Rgds,
MJ -
Keep Original Position Numbers in Purchase Order Creation
Hi community, i'm trying to solve the following problem in purchase order creation using BAPI_PO_CREATE1:
I'm loading a file with several order numbers and positions to be created in R/3. This file has a structure similar to:
OrderNumber;PositionNumber;Material;Quantity;Unit;.......
The purchase order is created successfully, but i need to keep original position numbers in the order. i.e:
Supposing this input file:
1900;08;993322;10.00;KG.....
1900;13;994455;12.00;KG.....
the positions in purchase order are created as
00010
00020
But i need positions to be created as:
00008
00013
Any ideas?????
Thanks you for your cooperation
LeonardoHi Leonardo,
I doubt if that is possible.
You can have the configuration set up to set the Item Number Interval to step size like 5,10,15 etc,
based on this value, your line item number will be
5,10,15,20...
10,20,30,40..
15,30,45,60
etc.
to set this value, you should go to SPRO.
Material Management->Purchase Order->Define Document Types
Regards,
Ravi Kanth Talagana -
Reg: ME21 Purchase Order Creation BDC Codes
Hi All,
Ritenow Im working with ME21 purchase order creation,
i have to create a upload program for this past twodays im geting hectic with this prog, if i create a prog using me21n transaction it is not running, and in ME21 i cant record in SHDB( it throws error messg as fill mandatory flds, but i dont hav data for that flds).
Anyone plz let me know, how to record it and how to use step loop in item overview/details, i would like ot close it ASP.
Thanks in advance.hi
Creating an ABAP program from a BDC recording
Step 1
Execute transaction recorder, transaction SHDB or recording button via transaction SM35.
Step 2
Enter name for recording (can be anything)
Step 3
Enter transaction to be executed
Step 4
The transaction will now be executed, simply perform the actions you want to record. enter some values for the mandatory fields.
Step 5
Once you have finished the recording and selected the save button or exited the transaction you
Will be presented with the following information. This details the screens and fields that have been
Processed during the recording and will be used as a basis to create BDC ABAP program. -
To find name for standard smartform of purchase order in Tcode me21n.......
Please do not offer rewards
Hi Abapers,
I had doubt, regarding how to find the name of standard smartform available for purchase order in tcode - ME21N.
After executing ME21N, n print preview i get a form without logo. So i want to customize the form according to my clients requirement.For this i want to know the Smartform name, so tat i can copy to 'Z.....' and make the customization.
Can anybody assist me overcome this problem of how to find out the name of smartform without knwing functionmodule name also....
<<Text removed>>
Advanced Thanks..............
Edited by: Matt on Mar 25, 2009 10:26 AMDESIGN ONE SMARTFORM AS PERUR NEED.
DRIVER PROGRAM FOR THISIS
*& ZSAPFM06P
&---- Print of a PO by SMART FORMS *
*& Purchase order printing program
&---- FORM ENTRY
SmartForm from customizing table TNAPR
determine smartform function module for invoice
variant = ' '
direct_call = ' '
control-no_open = 'X'.
control-no_close = 'X'.
call smartform invoice
archive_index = toa_dara
archive_parameters = arc_params
mail_appl_obj =
mail_recipient = ls_recipient
mail_sender = ls_sender
output_options = ls_composer_param
is_bil_invoice = ls_bil_invoice
is_repeat = repeat
importing job_output_info = ls_job_info
document_output_info =
job_output_options =
error handling
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
analyse internal error table of Smart Forms
add your handling
REPORT ZSAPFM06P.
TABLES: TNAPR,
nast.
DATA: lf_fm_name TYPE rs38l_fnam,
lf_formname TYPE tdsfname,
control type ssfctrlop,
errtab type tsferror.
FORM entry_neu using ent_retco ent_screen.
lf_formname = tnapr-sform.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING formname = lf_formname
IMPORTING fm_name = lf_fm_name
EXCEPTIONS no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
control-no_dialog = 'X'.
control-preview = 'X'.
control-langu = sy-langu.
CALL FUNCTION lf_fm_name
EXPORTING
control_parameters = control
user_settings = 'X'
is_nast = nast
EXCEPTIONS formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
if sy-subrc <> 0.
ent_retco = 0.
else.
ent_retco = 0.
endif.
call function 'SSF_READ_ERRORS'
importing
errortab = errtab.
if not errtab is initial.
endif.
ENDFORM.
DEFINE UR PROGRAM NAME AND SMARTFORM NAME IN NACE. -
Document in transfer for purchase order - creation not possible
Hi Experts,
we get this error when we do confirmation"'document in transfer for purchase order - creation not possible'"
any inputs are appreciated
Rg
samHi All,
We have resolved the above problem.
When user does confirmation ,if it sucessfully created then there will be no entry in BBP_Document_tab table.If it's in error in process and next time when user tries to do GR then he will encounter a pop up message "Document in transfer for PO, creation not possible".
So we need to delete the entries from table BBP_DOCUMENT_TAB using FM BBP_DELETE_FROM_DOCUMENT_TAB.
Then check again in BBP_DOCUMENT_TAB now there will be noentry there...so now user can do the confirmation from SRM,he will not encounter this error now.
Thanks to all the ppl who has replied
sameer -
Getting IDOC after Purchase Order creation
Hey,
i need to get the XML-data from the IDOC which is created right after the creation of a purchase order with TR ME21N.
I tried the following user exits:
MM06E001- EXIT_SAPLEINM_002
MM06E001- EXIT_SAPLEINM_011
but it seems the program doesnt run into them, even if they're active as exit in my project.
Can anyone tell me how can i do that ? Maybe over an event ?
thanks and any help will be rewarded,
oliverHi Tejas,
I do not know about Trading Contract but what all I can say it that Check if Change pointers are getting written Once the PO has been created, If "Yes" then probably you do not have to do anything for craetion of Purchanse Order. You can use RBDMIDOC Program to create IDOCs from change pointers.
Refer [this|http://help.sap.com/saphelp_nw04/helpdata/en/12/83e03c19758e71e10000000a114084/content.htm] for more information on change pointers.
Regards
Shital -
BOM change after Purchase order creation
Dear all
My client requirement is an error message should appear when the end users are trying to change the BOM after the purchase order creation for the BOM items and the system should allow the BOM change only after the PO cancellation.
Please throw some light
regards
KumarDear Kumar,
Do you mean to say user's should not be allowed to change hte BOM items in a purchase order?or should not be allowed to change a
BOM,if there are some purchase orders for the same material?
If your requirement is to restrict the BOM change of a material using T code CS02,after purchase order creation,I dont think its
possible.
Please explain your problem little more in detail.
Regards
Mangalraj.S -
Need to track Purchase order creation time
Is there anyway to to track purchase order creation time to approve the PO within 4 hours.
Regards,
PradeepHi,
In SE16 or SE16N put the PO no and find the field AEDAT which is creation date of the PO.To know the time browse the table CDHDR .in the object value put the PO No. and in Transaction put ME21n ,you will get the time also.
Dhruba
Message was edited by:
Dhruba Charan Behera -
Error in : Purchase order Creation using BAPI_PO_CREATE1
Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
i_create_order,
i_cycle TYPE cycle,
i_qty_acpt TYPE dzmeng,
i_dly_date TYPE vbak-vdatu,
i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
i_vbap TYPE vbap,
i_ekko TYPE ekko,
i_ekpo TYPE ekpo,
i_bsoh TYPE bapisdhd1,
i_bsohx TYPE bapisdhd1x,
i_bpoh TYPE bapimepoheader,
i_bpohx TYPE bapimepoheaderx,
i_vbeln TYPE vbeln_va,
i_posnr TYPE posnr_va,
i_contr TYPE vbeln_va,
i_conit TYPE posnr_va,
i_ebeln TYPE ebeln,
i_ebelp TYPE ebelp,
i_pargr TYPE pargr,
i_thead TYPE thead,
i_line TYPE tline,
i_note TYPE txw_note,
i_new_vbeln TYPE vbeln_va,
i_new_ebeln TYPE ebeln,
i_wa_bsoi TYPE bapisditm,
i_wa_bsoix TYPE bapisditmx,
i_wa_bsop TYPE bapiparnr,
i_wa_bsos TYPE bapischdl,
i_wa_bsosx TYPE bapischdlx,
i_wa_vbpa TYPE vbpa,
i_wa_vbkd TYPE vbkd,
i_wa_bpoi TYPE bapimepoitem,
i_wa_bpoix TYPE bapimepoitemx,
i_wa_bpos TYPE bapimeposchedule,
i_wa_bposx TYPE bapimeposchedulx,
i_wa_bpop TYPE bapiekkop,
i_wa_ekpa TYPE ekpa,
i_message TYPE char72,
i_bapiretn TYPE bapiret2,
i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
c_char_e VALUE 'E',
c_char_p VALUE 'P',
c_char_g VALUE 'G',
c_char_i VALUE 'I',
c_char_s VALUE 'S',
c_char_x VALUE 'X',
c_zsw(3) VALUE 'ZSW',
c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
IF NOT i_create_order IS INITIAL .
CLEAR: i_create_order .
MOVE: wa_order_split_create-docnr TO i_ebeln,
wa_order_split_create-docitm TO i_ebelp .
CALL FUNCTION 'ME_EKKO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
IMPORTING
po_ekko = i_ekko
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
ENDIF .
* Fill PO Header
i_bpoh-comp_code = i_ekko-bukrs .
i_bpoh-doc_type = i_ekko-bsart .
i_bpoh-vendor = i_ekko-lifnr .
i_bpoh-langu = i_ekko-spras .
i_bpoh-pmnttrms = i_ekko-zterm .
i_bpoh-purch_org = i_ekko-ekorg .
i_bpoh-pur_group = i_ekko-ekgrp .
i_bpoh-currency = i_ekko-waers .
i_bpoh-agreement = i_ekko-konnr .
i_bpoh-incoterms1 = i_ekko-inco1 .
i_bpoh-incoterms2 = i_ekko-inco2 .
* Fill PO update indicator 'X'
i_bpohx-comp_code = c_char_x .
i_bpohx-doc_type = c_char_x .
i_bpohx-vendor = c_char_x .
i_bpohx-langu = c_char_x .
i_bpohx-pmnttrms = c_char_x .
i_bpohx-purch_org = c_char_x .
i_bpohx-pur_group = c_char_x .
i_bpohx-currency = c_char_x .
i_bpohx-agreement = c_char_x .
i_bpohx-incoterms1 = c_char_x .
i_bpohx-incoterms2 = c_char_x .
CALL FUNCTION 'ME_EKPO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
pi_ebelp = i_ebelp
IMPORTING
po_ekpo = i_ekpo
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF .
* Fill PO Item
i_wa_bpoi-po_item = i_ekpo-ebelp .
i_wa_bpoi-material = i_ekpo-matnr .
i_wa_bpoi-plant = i_ekpo-werks .
i_wa_bpoi-stge_loc = i_ekpo-lgort .
i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
i_wa_bpoi-po_unit = i_ekpo-meins .
i_wa_bpoi-tax_code = i_ekpo-mwskz .
i_wa_bpoi-val_type = i_ekpo-bwtar .
i_wa_bpoi-item_cat = i_ekpo-pstyp .
i_wa_bpoi-acctasscat = i_ekpo-knttp .
i_wa_bpoi-agreement = i_ekpo-konnr .
i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
APPEND i_wa_bpoi TO i_bpoi .
* Fill PO Item update indicator 'X'
i_wa_bpoix-po_item = i_ekpo-ebelp .
i_wa_bpoix-po_itemx = c_char_x .
i_wa_bpoix-material = c_char_x .
i_wa_bpoix-plant = c_char_x .
i_wa_bpoix-stge_loc = c_char_x .
i_wa_bpoix-quantity = c_char_x .
i_wa_bpoix-po_unit = c_char_x .
i_wa_bpoix-tax_code = c_char_x .
i_wa_bpoix-val_type = c_char_x .
i_wa_bpoix-item_cat = c_char_x .
i_wa_bpoix-acctasscat = c_char_x .
i_wa_bpoix-agreement = c_char_x .
i_wa_bpoix-agmt_item = c_char_x .
APPEND i_wa_bpoix TO i_bpoix .
* Fill PO Item Schedule
i_wa_bpos-po_item = i_ekpo-ebelp .
i_wa_bpos-sched_line = '0001' .
i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
APPEND i_wa_bpos TO i_bpos .
* Fill PO Item schedule update indicator 'X'
i_wa_bposx-po_item = i_ekpo-ebelp .
i_wa_bposx-sched_line = '0001' .
i_wa_bposx-delivery_date = c_char_x .
i_wa_bposx-quantity = c_char_x .
APPEND i_wa_bposx TO i_bposx .
CLEAR: i_pargr .
SELECT SINGLE pargr
INTO i_pargr
FROM t161
WHERE bstyp = i_ekko-bstyp
AND bsart = i_ekko-bsart .
CLEAR i_ekpa[].
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = i_ekpa[].
LOOP AT i_ekpa INTO i_wa_ekpa .
i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
i_wa_bpop-langu = sy-langu .
IF NOT i_wa_ekpa-lifn2 IS INITIAL .
i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
ELSE .
i_wa_bpop-buspartno = i_wa_ekpa-parnr .
ENDIF .
APPEND i_wa_bpop TO i_bpop .
CLEAR: i_wa_ekpa, i_wa_bpop .
ENDLOOP .
CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = i_bpoh
poheaderx = i_bpohx
IMPORTING
exppurchaseorder = i_new_ebeln
TABLES
return = i_bapiret2
poitem = i_bpoi[]
poitemx = i_bpoix[]
poschedule = i_bpos[]
poschedulex = i_bposx[].
i_order = i_new_ebeln .
SHIFT i_order LEFT DELETING LEADING '0' .
i_return-errortype = c_char_i .
i_return-workarea = c_zsw .
i_return-message = '064' .
i_return-variable1 = i_order .
loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
append i_bapiretn to t_bapi_return .
endloop .
if t_bapi_return[] is initial .
i_create_order = c_char_x .
CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
EXPORTING
act_return = i_return. "Popup with new PO no.
ENDCASE . " Docind
ENDIF .
ENDLOOP.Hi Shareen,
I think in the following parts of the code,
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = i_ekpa[].
Error in : Purchase order Creation using BAPI_PO_CREATE1
Posted: Mar 20, 2006 7:39 PM Reply E-mail this post
Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
i_create_order,
i_cycle TYPE cycle,
i_qty_acpt TYPE dzmeng,
i_dly_date TYPE vbak-vdatu,
i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
i_vbap TYPE vbap,
i_ekko TYPE ekko,
i_ekpo TYPE ekpo,
i_bsoh TYPE bapisdhd1,
i_bsohx TYPE bapisdhd1x,
i_bpoh TYPE bapimepoheader,
i_bpohx TYPE bapimepoheaderx,
i_vbeln TYPE vbeln_va,
i_posnr TYPE posnr_va,
i_contr TYPE vbeln_va,
i_conit TYPE posnr_va,
i_ebeln TYPE ebeln,
i_ebelp TYPE ebelp,
i_pargr TYPE pargr,
i_thead TYPE thead,
i_line TYPE tline,
i_note TYPE txw_note,
i_new_vbeln TYPE vbeln_va,
i_new_ebeln TYPE ebeln,
i_wa_bsoi TYPE bapisditm,
i_wa_bsoix TYPE bapisditmx,
i_wa_bsop TYPE bapiparnr,
i_wa_bsos TYPE bapischdl,
i_wa_bsosx TYPE bapischdlx,
i_wa_vbpa TYPE vbpa,
i_wa_vbkd TYPE vbkd,
i_wa_bpoi TYPE bapimepoitem,
i_wa_bpoix TYPE bapimepoitemx,
i_wa_bpos TYPE bapimeposchedule,
i_wa_bposx TYPE bapimeposchedulx,
i_wa_bpop TYPE bapiekkop,
i_wa_ekpa TYPE ekpa,
i_message TYPE char72,
i_bapiretn TYPE bapiret2,
i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
c_char_e VALUE 'E',
c_char_p VALUE 'P',
c_char_g VALUE 'G',
c_char_i VALUE 'I',
c_char_s VALUE 'S',
c_char_x VALUE 'X',
c_zsw(3) VALUE 'ZSW',
c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
IF NOT i_create_order IS INITIAL .
CLEAR: i_create_order .
MOVE: wa_order_split_create-docnr TO i_ebeln,
wa_order_split_create-docitm TO i_ebelp .
CALL FUNCTION 'ME_EKKO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
IMPORTING
po_ekko = i_ekko
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
ENDIF .
Fill PO Header
i_bpoh-comp_code = i_ekko-bukrs .
i_bpoh-doc_type = i_ekko-bsart .
i_bpoh-vendor = i_ekko-lifnr .
i_bpoh-langu = i_ekko-spras .
i_bpoh-pmnttrms = i_ekko-zterm .
i_bpoh-purch_org = i_ekko-ekorg .
i_bpoh-pur_group = i_ekko-ekgrp .
i_bpoh-currency = i_ekko-waers .
i_bpoh-agreement = i_ekko-konnr .
i_bpoh-incoterms1 = i_ekko-inco1 .
i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
i_bpohx-comp_code = c_char_x .
i_bpohx-doc_type = c_char_x .
i_bpohx-vendor = c_char_x .
i_bpohx-langu = c_char_x .
i_bpohx-pmnttrms = c_char_x .
i_bpohx-purch_org = c_char_x .
i_bpohx-pur_group = c_char_x .
i_bpohx-currency = c_char_x .
i_bpohx-agreement = c_char_x .
i_bpohx-incoterms1 = c_char_x .
i_bpohx-incoterms2 = c_char_x .
CALL FUNCTION 'ME_EKPO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
pi_ebelp = i_ebelp
IMPORTING
po_ekpo = i_ekpo
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF .
Fill PO Item
i_wa_bpoi-po_item = i_ekpo-ebelp .
i_wa_bpoi-material = i_ekpo-matnr .
i_wa_bpoi-plant = i_ekpo-werks .
i_wa_bpoi-stge_loc = i_ekpo-lgort .
i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
i_wa_bpoi-po_unit = i_ekpo-meins .
i_wa_bpoi-tax_code = i_ekpo-mwskz .
i_wa_bpoi-val_type = i_ekpo-bwtar .
i_wa_bpoi-item_cat = i_ekpo-pstyp .
i_wa_bpoi-acctasscat = i_ekpo-knttp .
i_wa_bpoi-agreement = i_ekpo-konnr .
i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
i_wa_bpoix-po_item = i_ekpo-ebelp .
i_wa_bpoix-po_itemx = c_char_x .
i_wa_bpoix-material = c_char_x .
i_wa_bpoix-plant = c_char_x .
i_wa_bpoix-stge_loc = c_char_x .
i_wa_bpoix-quantity = c_char_x .
i_wa_bpoix-po_unit = c_char_x .
i_wa_bpoix-tax_code = c_char_x .
i_wa_bpoix-val_type = c_char_x .
i_wa_bpoix-item_cat = c_char_x .
i_wa_bpoix-acctasscat = c_char_x .
i_wa_bpoix-agreement = c_char_x .
i_wa_bpoix-agmt_item = c_char_x .
APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
i_wa_bpos-po_item = i_ekpo-ebelp .
i_wa_bpos-sched_line = '0001' .
i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
i_wa_bposx-po_item = i_ekpo-ebelp .
i_wa_bposx-sched_line = '0001' .
i_wa_bposx-delivery_date = c_char_x .
i_wa_bposx-quantity = c_char_x .
APPEND i_wa_bposx TO i_bposx .
CLEAR: i_pargr .
SELECT SINGLE pargr
INTO i_pargr
FROM t161
WHERE bstyp = i_ekko-bstyp
AND bsart = i_ekko-bsart .
CLEAR i_ekpa[].
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = <b>i_ekpa[].</b>
LOOP AT i_ekpa INTO i_wa_ekpa .
i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
i_wa_bpop-langu = sy-langu .
IF NOT i_wa_ekpa-lifn2 IS INITIAL .
i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
ELSE .
i_wa_bpop-buspartno = i_wa_ekpa-parnr .
ENDIF .
APPEND i_wa_bpop TO i_bpop .
CLEAR: i_wa_ekpa, i_wa_bpop .
ENDLOOP .
CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = i_bpoh
poheaderx = i_bpohx
IMPORTING
exppurchaseorder = i_new_ebeln
TABLES
return = i_bapiret2
<b> poitem = i_bpoi[]
poitemx = i_bpoix[]
poschedule = i_bpos[]
poschedulex = i_bposx[].</b>
it should be only i_bpoi, i_bpoix, i_bpos, i_bposx but not i_bpoi[], i_bpoix[], i_bpos[], i_bposx[].
CHange the code as follows:
DATA: i_insert,
i_create_order,
i_cycle TYPE cycle,
i_qty_acpt TYPE dzmeng,
i_dly_date TYPE vbak-vdatu,
i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
i_vbap TYPE vbap,
i_ekko TYPE ekko,
i_ekpo TYPE ekpo,
i_bsoh TYPE bapisdhd1,
i_bsohx TYPE bapisdhd1x,
i_bpoh TYPE bapimepoheader,
i_bpohx TYPE bapimepoheaderx,
i_vbeln TYPE vbeln_va,
i_posnr TYPE posnr_va,
i_contr TYPE vbeln_va,
i_conit TYPE posnr_va,
i_ebeln TYPE ebeln,
i_ebelp TYPE ebelp,
i_pargr TYPE pargr,
i_thead TYPE thead,
i_line TYPE tline,
i_note TYPE txw_note,
i_new_vbeln TYPE vbeln_va,
i_new_ebeln TYPE ebeln,
i_wa_bsoi TYPE bapisditm,
i_wa_bsoix TYPE bapisditmx,
i_wa_bsop TYPE bapiparnr,
i_wa_bsos TYPE bapischdl,
i_wa_bsosx TYPE bapischdlx,
i_wa_vbpa TYPE vbpa,
i_wa_vbkd TYPE vbkd,
i_wa_bpoi TYPE bapimepoitem,
i_wa_bpoix TYPE bapimepoitemx,
i_wa_bpos TYPE bapimeposchedule,
i_wa_bposx TYPE bapimeposchedulx,
i_wa_bpop TYPE bapiekkop,
i_wa_ekpa TYPE ekpa,
i_message TYPE char72,
i_bapiretn TYPE bapiret2,
i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
c_char_e VALUE 'E',
c_char_p VALUE 'P',
c_char_g VALUE 'G',
c_char_i VALUE 'I',
c_char_s VALUE 'S',
c_char_x VALUE 'X',
c_zsw(3) VALUE 'ZSW',
c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
IF NOT i_create_order IS INITIAL .
CLEAR: i_create_order .
MOVE: wa_order_split_create-docnr TO i_ebeln,
wa_order_split_create-docitm TO i_ebelp .
CALL FUNCTION 'ME_EKKO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
IMPORTING
po_ekko = i_ekko
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
ENDIF .
Fill PO Header
i_bpoh-comp_code = i_ekko-bukrs .
i_bpoh-doc_type = i_ekko-bsart .
i_bpoh-vendor = i_ekko-lifnr .
i_bpoh-langu = i_ekko-spras .
i_bpoh-pmnttrms = i_ekko-zterm .
i_bpoh-purch_org = i_ekko-ekorg .
i_bpoh-pur_group = i_ekko-ekgrp .
i_bpoh-currency = i_ekko-waers .
i_bpoh-agreement = i_ekko-konnr .
i_bpoh-incoterms1 = i_ekko-inco1 .
i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
i_bpohx-comp_code = c_char_x .
i_bpohx-doc_type = c_char_x .
i_bpohx-vendor = c_char_x .
i_bpohx-langu = c_char_x .
i_bpohx-pmnttrms = c_char_x .
i_bpohx-purch_org = c_char_x .
i_bpohx-pur_group = c_char_x .
i_bpohx-currency = c_char_x .
i_bpohx-agreement = c_char_x .
i_bpohx-incoterms1 = c_char_x .
i_bpohx-incoterms2 = c_char_x .
CALL FUNCTION 'ME_EKPO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
pi_ebelp = i_ebelp
IMPORTING
po_ekpo = i_ekpo
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF .
Fill PO Item
i_wa_bpoi-po_item = i_ekpo-ebelp .
i_wa_bpoi-material = i_ekpo-matnr .
i_wa_bpoi-plant = i_ekpo-werks .
i_wa_bpoi-stge_loc = i_ekpo-lgort .
i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
i_wa_bpoi-po_unit = i_ekpo-meins .
i_wa_bpoi-tax_code = i_ekpo-mwskz .
i_wa_bpoi-val_type = i_ekpo-bwtar .
i_wa_bpoi-item_cat = i_ekpo-pstyp .
i_wa_bpoi-acctasscat = i_ekpo-knttp .
i_wa_bpoi-agreement = i_ekpo-konnr .
i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
i_wa_bpoix-po_item = i_ekpo-ebelp .
i_wa_bpoix-po_itemx = c_char_x .
i_wa_bpoix-material = c_char_x .
i_wa_bpoix-plant = c_char_x .
i_wa_bpoix-stge_loc = c_char_x .
i_wa_bpoix-quantity = c_char_x .
i_wa_bpoix-po_unit = c_char_x .
i_wa_bpoix-tax_code = c_char_x .
i_wa_bpoix-val_type = c_char_x .
i_wa_bpoix-item_cat = c_char_x .
i_wa_bpoix-acctasscat = c_char_x .
i_wa_bpoix-agreement = c_char_x .
i_wa_bpoix-agmt_item = c_char_x .
APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
i_wa_bpos-po_item = i_ekpo-ebelp .
i_wa_bpos-sched_line = '0001' .
i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
i_wa_bposx-po_item = i_ekpo-ebelp .
i_wa_bposx-sched_line = '0001' .
i_wa_bposx-delivery_date = c_char_x .
i_wa_bposx-quantity = c_char_x .
APPEND i_wa_bposx TO i_bposx .
CLEAR: i_pargr .
SELECT SINGLE pargr
INTO i_pargr
FROM t161
WHERE bstyp = i_ekko-bstyp
AND bsart = i_ekko-bsart .
CLEAR i_ekpa[].
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = i_ekpa.
LOOP AT i_ekpa INTO i_wa_ekpa .
i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
i_wa_bpop-langu = sy-langu .
IF NOT i_wa_ekpa-lifn2 IS INITIAL .
i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
ELSE .
i_wa_bpop-buspartno = i_wa_ekpa-parnr .
ENDIF .
APPEND i_wa_bpop TO i_bpop .
CLEAR: i_wa_ekpa, i_wa_bpop .
ENDLOOP .
CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = i_bpoh
poheaderx = i_bpohx
IMPORTING
exppurchaseorder = i_new_ebeln
TABLES
return = i_bapiret2
poitem = i_bpoi
poitemx = i_bpoix
poschedule = i_bpos
poschedulex = i_bposx.
i_order = i_new_ebeln .
SHIFT i_order LEFT DELETING LEADING '0' .
i_return-errortype = c_char_i .
i_return-workarea = c_zsw .
i_return-message = '064' .
i_return-variable1 = i_order .
loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
append i_bapiretn to t_bapi_return .
endloop .
if t_bapi_return[] is initial .
i_create_order = c_char_x .
CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
EXPORTING
act_return = i_return. "Popup with new PO no.
ENDCASE . " Docind
ENDIF .
ENDLOOP. -
Purchase Order Creation from ME5A Report
Hi experts,
My client wants Purchase Order Creation from ME5A Report.
He wants show Open Purchase Requisition through ME5A report then he will select Purchase Requisition Number or line item for po creation from there only.
Please advice how I can map this process in sap.
Thanks in advance,
ChandhuWhy don't you use ME57 to display open PRs and then assign sources and convert them to PO?
Or use ME57 to assign sources and ME59 to automatically convert them to PO.
You can create your very own format for report display using custom "Scope Of List" for ME57.
Look in SPRO under Purchasing>Reporting>Maintain Purchase requisition lists. -
Getting errors when iam using BAPI_PO_CREATE1 for Purchase Order creation
Hi sap Gurus,
I am getting Errors when iam using BAPI_PO_CREATE1 for Purchase Order creation that Material (144) does not exist but it is alreardy maintained in MM01.
I dont get how it is coming.and what are the mandatory fields in bapi BAPI_PO_CREATE1 in item level .that is too material only.
pls let me know .
thanks in advance.Hi,
Check the sample code..
report zpo_test .
*DATA DECLARATION
constants : c_x value 'X'.
*Structures to hold PO header data
data : header like bapimepoheader ,
headerx like bapimepoheaderx .
*Structures to hold PO account data
data : account like bapimepoaccount occurs 0 with header line ,
accountx like bapimepoaccountx occurs 0 with header line .
*Internal Tables to hold PO ITEM DATA
data : item like bapimepoitem occurs 0 with header line,
itemx like bapimepoitemx occurs 0 with header line,
*Internal table to hold messages from BAPI call
return like bapiret2 occurs 0 with header line,
*Internal table to hold messages from BAPI call
pocontractlimits like bapiesucc occurs 0 with header line.
data : w_header(40) value 'PO Header',
purchaseorder like bapimepoheader-po_number,
delivery_date like bapimeposchedule-delivery_date.
data : ws_langu like sy-langu.
*text-001 = 'PO Header' - define as text element
selection-screen begin of block b1 with frame title text-001.
parameters : company like header-comp_code default '122' ,
doctyp like header-doc_type default 'NB' ,
cdate like header-creat_date default sy-datum ,
vendor like header-vendor default '2000000012' ,
pur_org like header-purch_org default 'PU01' ,
pur_grp like header-pur_group default '005' .
*sociedad like HEADER-COMP_CODE default '122' ,
*vendedor like HEADER-SALES_PERS default 'sale person'.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-002.
parameters : item_num like item-po_item default '00010',
material like item-material default '12000000' ,
tipo_imp like item-acctasscat default 'K' ,
*pos_doc like ITEM-ITEM_CAT default 'F' ,
shorttxt like item-short_text default 'PRUEBA BAPI' ,
grup_art like item-matl_group default '817230000' ,
plant like item-plant default '3001' ,
mpe like item-trackingno default '9999' ,
*contrato like ITEM-AGREEMENT default '4904000003' ,
*quantity like ITEM-QUANTITY default 1 .
po_unit like item-po_unit default 'EA'.
selection-screen end of block b2.
Par?mnetros de imputaci?n
selection-screen begin of block b3 with frame title text-004.
parameters : centro like account-costcenter default '1220813150',
cuenta like account-gl_account default '6631400' ,
num_pos like account-po_item default '10' ,
serial like account-serial_no default '01' ,
ind_imp like account-tax_code default 'I2' .
selection-screen end of block b3.
start-of-selection.
*DATA POPULATION
ws_langu = sy-langu. "Language variable
*POPULATE HEADER DATA FOR PO
*HEADER-COMP_CODE = sociedad .
header-doc_type = doctyp .
header-vendor = vendor .
header-creat_date = cdate .
header-created_by = 'TD17191' .
header-purch_org = pur_org .
header-pur_group = pur_grp .
header-comp_code = company .
header-langu = ws_langu .
*HEADER-SALES_PERS = vendedor .
*HEADER-CURRENCY = 'DOP' .
*HEADER-ITEM_INTVL = 10 .
*HEADER-PMNTTRMS = 'N30' .
*HEADER-EXCH_RATE = 1 .
*POPULATE HEADER FLAG.
headerx-comp_code = c_x.
headerx-doc_type = c_x.
headerx-vendor = c_x.
headerx-creat_date = c_x.
headerx-created_by = c_x.
headerx-purch_org = c_x.
headerx-pur_group = c_x.
headerx-langu = c_x.
*HEADERX-sales_pers = c_x.
*HEADERX-CURRENCY = c_x.
*HEADER-ITEM_INTVL = c_x.
*HEADER-PMNTTRMS = c_x.
*HEADER-EXCH_RATE = c_x.
*HEADER-EXCH_RATE = c_x.
*POPULATE ITEM DATA.
item-po_item = item_num.
item-quantity = '1'.
*ITEM-MATERIAL = material .
item-short_text = 'prueba bapi_po_create1'.
*ITEM-TAX_CODE = ''.
item-acctasscat = 'K' .
*ITEM-ITEM_CAT = 'D' .
item-matl_group = '817230000' .
item-plant = '3001' .
item-trackingno = '99999'.
item-preq_name = 'test'.
*ITEM-AGREEMENT = '' .
*ITEM-AGMT_ITEM = ''.
item-quantity = '1' .
item-po_unit = 'EA'.
*ITEM-ORDERPR_UN = 'EA'.
item-conv_num1 = '1'.
item-conv_den1 = '1'.
item-net_price = '1000000' .
item-price_unit = '1'.
item-gr_pr_time = '0'.
item-prnt_price = 'X'.
item-unlimited_dlv = 'X'.
item-gr_ind = 'X' .
item-ir_ind = 'X' .
item-gr_basediv = 'X'.
*ITEM-PCKG_NO = '' .
append item. clear item.
*POPULATE ITEM FLAG TABLE
itemx-po_item = item_num.
itemx-po_itemx = c_x.
*ITEMX-MATERIAL = C_X.
itemx-short_text = c_x.
itemx-quantity = c_x.
*ITEMX-TAX_CODE = C_X.
itemx-acctasscat = c_x.
*ITEMX-ITEM_CAT = c_x.
itemx-matl_group = c_x.
itemx-plant = c_x.
itemx-trackingno = c_x.
itemx-preq_name = c_x.
*ITEMX-AGREEMENT = C_X.
*ITEMX-AGMT_ITEM = c_x.
itemx-stge_loc = c_x.
itemx-quantity = c_x.
itemx-po_unit = c_x.
*ITEMX-ORDERPR_UN = C_X.
itemx-conv_num1 = c_x.
itemx-conv_den1 = c_x.
itemx-net_price = c_x.
itemx-price_unit = c_x.
itemx-gr_pr_time = c_x.
itemx-prnt_price = c_x.
itemx-unlimited_dlv = c_x.
itemx-gr_ind = c_x .
itemx-ir_ind = c_x .
itemx-gr_basediv = c_x .
append itemx. clear itemx.
*POPULATE ACCOUNT DATA.
account-po_item = item_num.
account-serial_no = serial .
account-creat_date = sy-datum .
account-costcenter = centro .
account-gl_account = cuenta .
account-gr_rcpt = 'tester'.
append account. clear account.
*POPULATE ACCOUNT FLAG TABLE.
accountx-po_item = item_num .
accountx-po_itemx = c_x .
accountx-serial_no = serial .
accountx-serial_nox = c_x .
accountx-creat_date = c_x .
accountx-costcenter = c_x .
accountx-gl_account = c_x .
account-gr_rcpt = c_x.
append accountx. clear accountx.
*BAPI CALL
call function 'DIALOG_SET_NO_DIALOG'.
call function 'BAPI_PO_CREATE1'
exporting
poheader = header
poheaderx = headerx
importing
exppurchaseorder = purchaseorder
tables
return = return
poitem = item
poitemx = itemx
poaccount = account
poaccountx = accountx.
*Confirm the document creation by calling database COMMIT
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'
IMPORTING
RETURN =
end-of-selection.
*Output the messages returned from BAPI call
loop at return.
write / return-message.
endloop.
Regards
Sudheer
Maybe you are looking for
-
Command button remains disabled after a request redirect to a PDF Servlet
Hi All, I've a command button to generate PDF on the fly and used to work in JDev 10.1.3.3. When we migrated to 11g, it works for the first time on a page, and the file Open/Save dialog will come up. But then the command button remains grayed out, an
-
Deskjet 3050A - wireless radio is not functioning
I cannot connect my Deskjet 3050A-J611g on my wireless network. In attempting to set up the network I get the message: "The wireless radio is not functioning. Contact HP support". The troubleshooting information does not appear to address this pr
-
ICloud and multiple mail accounts...
... is something of a mystery to me. I have 4 accounts added to the mail app on my iPhone 4 and the unified inbox is a real handy thing. Saves me time since I don't have to check the accounts individually. This is great. Or would've been if it wasn't
-
Can someone please give me step by step directions on how to view temporary files on an iPad 2.. Thank you
-
Is there any way to open a new window for a document and assign it a different mode? For example, I want to work on a color RGB image, but check the results in real time on a second doc window set to greyscale. Any ideas? Thanks, David