Purchase Order is generated after MRP for Material with MRP Type ND

Hi Everyone,
Material type := HAWA
My material procurement type = F i.e. External Procurement.
MRP Type = ND in Production server , and VB in Quality
Lot Size = EX
Material Status :- 15 Pre-release both for Quality and production server
The Material is bulk material and bulk material indicator is set.
Purchasing View is also maintained for the same.
Planning Strat = Z5 Company specific
Special procurement key:- Z7 Company specific
I am running MD02 with following parameters.
Create Pur Req =1, PR
Create MRP List = 1, MRP List
Delivery Schedule = 3, Schedule Lines
Planning Mode = 2 Re- Explode BOM & Routing
Scheduling = 1
Issue:
After MRP run, system is generating PR, Though with MRP type ND purchase requisition should not be generated.
Observation:- Looks like there is inconsistency of material date in Quality and production server.
When I tried to run the planning , The Error message was generated"Material status is set to pre- release.
After changing the material status to 20 (Active ) , when we run the MRP , The error message is generated "Material is not planned automatically "
We havent been able to locate the root cause so far
Please guide us
Thanks in Advance,
Ayaz
Edited by: Ayaz Alam Khan on Feb 16, 2011 2:41 PM

IF the material is ND, system won't Run MRP for the material
Observation:- Looks like there is inconsistency of material date in Quality and production server.
There is no link
When I tried to run the planning , The Error message was generated"Material status is set to pre- release.After changing the material status to 20 (Active ) , when we run the MRP , The error message is generated "Material is not planned automatically "
system will read the X plant material status or plant specific material status first and then only system will read MRP type

Similar Messages

Replenishment delivery for material with MRP areas and Avl Check

HI We have MRP area at storage location level maintained for materials. Stock exists in the plant in the storage location which is part of the MRP area.
Now when I create STO and try to create delivery for the same, system is giving message 0 stock available and not creating delivery. Material has 02 Avl Chck group.If I deactivate the MRP area in the material master, it allows creation of delivery.
How can I ensure that system creates delivery even though stocks exist in MRP area relevant sloc only in the plant?
Sriram

1) According to SAP when inbound deliveries are used and your delivery item category is set up for mvt type 101, these should be received with transaction VL32N. If you use MIGO/MB0A instead the GR status in the delivery will not be updated. If you then report on open deliveries you'll notice that nothing is received in the course of time. Amazing. Now if you set up the delivery item category without the movement type your inbound will not even be GR relevant. Just one of these things that's nice to be aware of.
Check note 199703.
may b it helps...

Searching for material with material group

Hi Friends,
How to get the old material no. material no., description after searching for material with material group.please reply....

SE16
table MARA
field BISMT is the old number
MATKL is material group
table MAKT
MAKTX description
you can make a query join with MATNR
Best Regards

Report for material with sloc,qty available, and production order

hi friends, i need advice on getting this report for material with qty and specific sloc with the corresponding Prodn order numbers. in mb51 i could get all these details except the prodn order no. could you advice me please?

to make sure you know how to do this.
In the material document list, hit "Ctrl+F8" on your keyboard.
A window will pop up. Click on the button position and look for "order" in the list of available fields. That should do it.
Rgds.

Serial Number creation for a material with stock type

Hi,
I am not able to create the serial number for a material which should have valuation type, plant and storage location using the function module ITOB_SERIALNO_CREATE_SINGLE.
There is no export or changing parametre for this function module for Valuation type(EQBS-LBBSA),
Plant(EQBS-B_WERK) and
Storage Location(EQBS-B_LAGER)
Can any one suggest me the BAPI or function module to create a serial number for a material with valudation type, plant and storage location rather tan going for BDC to transaction code IQ01.
(Note: We can create the serial number with valuation type manually using the transaction code "IQ01" for agiven material.)
For suitable answers would be rewarded.
Regards
Badari
Edited by: badari Narayana on Feb 10, 2008 5:20 PM

I have the solution below.
- Don't change Serial no. profile
- Goods issue all stock with mvt 201 or 261 into temporary cost object and note your text.
- Change Serial no. profile in material master
- Goods receipt all stock (You may ref. material doc.) and you need to input serial number for all materials.
Hope this solution can help you.
Edited by: Saiyaman on Dec 9, 2009 5:33 PM

PT_QTA00 is generating repetative records for the same quota type

PT_QTA00 is generating repetative records for the same quota type and one more thing i have already maintained 10 days of quota in 2006 and when i run for the same employee its creating one more record with 10 days again how can we restrict it in configuration

As said earlier, you want to setup Time Constraints for It2006 which is in table: V_T582A
You should set the Time Constraint to 2.
HR master data uses the following three time constraints:
Time Constraint 1
For the entire time that the employee works at the enterprise, exactly one valid infotype record must exist. The validity periods of the individual records must not overlap. If a new record is created, the system automatically uses the start date of the new record as the delimitation date of the old record. Gaps are only allowed between the employeeu2019s entry date and the start date of the first record.
Time constraint 1 must be used for all of the infotypes containing information that must be available at all times. This is particularly true of personal and organizational assignment data.
If a record is delimited because of time constraint 1, the system displays an appropriate message.
Time Constraint 2
No more than one valid record can exist at any one time. Records with constraint 2 must not overlap. Their existence is not obligatory. If a new record is created, the system automatically delimits the previous record, if one exists.
If a record is delimited because of time constraint 2, the system displays an appropriate message.
Time Constraint 3
Any number of valid records can exist at any one time. The individual records do not conflict with each other.

V-41 tcode error :Table 304 is not defined for use with condition type PR00

Hi All,
I am trying to create a BDC using the transaction V-41.
The first screen has fields:
ConditionType and Table, where I have to fill values ZPM1 and 800 respectively.
But as soon as I enter the tcode v-41 and say enter, the above mentioned fields are already having the values 'PR00' and ' 304'. Normally if you take an example fo t-code VA02, all fields are blank.
Then an error message is displayed:
Table 304 is not defined for use with condition type PR00
This behaviour is not allowing me to use the BDC feature.
Please advise me on why this is happening. What are the possible solutions I can use to clear these values programmatically?
Can anything be done via customizing?
Regards,
Namita.

Dear ILHAN ,
Well the problem you are facing is having the following solution:
Table 304 is not defined for use with condition type PR00
Message no. VK024
Diagnosis
The selected condition type does not fit in the condition table, that is the basis for the condition record. Alternatively the selected condition type is not included in the condition types that were selected on the selection screen or that are defined in the variant of the standard selection report.
Procedure
Úse F4 help to choose a valid condition type.
If this does not give you the required condition type, check in Customizing for condition types and the related access sequences.
In the condition maintenance also check Customizing for the selection report (pricing report), that you have selected in the navigation tree, using the standard condition table as a reference.
I hope this helps.
It has worked for me.
I gave it a try and what I am getting using the transaction V-41 is create Price condition (PR00) : Fast Entry.
Please award points if you find it useful.
Regards,
Rakesh

Open Purchase Orders not considered as requirement for MRP Run

Hi ,
We are facing a issue of Open Purchase orders not appeared in Stock requirements list and also it is not considered as requirement for MRP Run against reservation.
As aresult for a reservation demand of 10 units we are ending with Open POs 10 units and a additional planned order 10 units.
Material Type : ERSA
MRP Type : PD (or VB)
Lot size : EX ( HB if MRP Type is VB)
Could you please throw some light to correct our settings to MRP to consider Open POs?
Saravanan

Can you check to see if there is a re-order point set up for this materia? That could be causing the problem too.

Sales Order MRP for material

Dear all,
I am facing with some critical scenario ,we can share our views in this forum....
My Client is expecting one order...(He knows 101% he will get it ) so ,he will start to working on Procrument and production , it's a MTO order ...by that genuine order comes ....the expected order stock is 40% ready.
Now i need to stop the Expected order ,more over i need to transfer the stock to Expected to Genuine order...now againg i need to run the MRP for Genuine order.
Revert me back if you need more clarity.
Thanks in Advance
Regards
raj.

In that case, you generate the requirement via MD81 based on which, materials can be procured, produced and make ready for despatch.
Once the confirmed order is received, create a sale order for the entire quantity and during MRP run, system will consider the available stock and only for the remaining order quantity, system will throw the requirement.
thanks
G. Lakshmipathi

Purchase order workflow generating mails to invalid peron for one plant

Hi,
I have a situation, where the user is receiving workitem mails to approve to outlook, even though he is not an approver. This is the case with only one plant. One more point is even in non-PO workflow, he is receiving the woritem mail execution mails, and plant is same as in PO workflow. Can anyone explain, where I can find the plant and this user relation and how it is happening.

Hi,
Check wrong user ID assigned release code in basis side in authorization(SU01 & PFCG) and also check wrong user ID assigned release code to following path:
SPRO ---> MM -> Purchasing- > Purchase Order- > Release Procedure for Purchase Orders- > Define Release Procedure for Purchase Orders--- > Workflow ---> Here against each release code assign OT as US and respective User ID's for Release
Regards,
Biju K

Make-To-Order MRP for components with unstricted-use stock

Dear Experts,
There is a finished goods of material with standard planning strategy group "20" in the material master.
There is a component e.g. material A, under the BOM of the FG material.
There is already enough unrestricted stock for material A which has no special stock indicator assigned.
After creating the sales order, I use MD50 to run the make-to-order MRP, but the result shows that there a purchase requisition has been generated for the material A with the sales order assigned and specail stock indicator = "E".
Is there any solution so that there will be no PR generated for mat A as there is enough unrestricted-use stock.
And in the production order of the FG, can the component only requires the unstricted-use stock instead of the "E" stock?
(It is ok for the FG goods receipt as "E" stock.)
Thanks a lot.

Hi Ram,
Thanks for your information.
I set the indi/coll = 2 and null for the strategy for the component material A
Just want to know, which strategy should I use for the finished goods? And any other setting for the finished goods and the component?
And which transaction MD02 or MD50 for the planning run for the finished goods?
In such setting, after the planning run , PR will be generated for the net external procurement?
Actaully my situation is that I just keep own stock for components, I want MRP to consider the own stock instead of sales order stock before generating PR.
Thanks for your help again.
Claude

Restricting for creation or PO for material with other purchase group

Hi,
We have one requirement we want to restrict the user for creation of purchase order for the materials which is not in there purchasing group
on ME21N in order data we enter the Pur. Group e,g 101 and if user enter the material XYZ for which the purchasing group is 102 system should issue the error message for this, so what setting can be done for this
regards,
zafar

the purchasing group in material master is just a default for requisitions that are created via MRP.
user can enter whatever purchasing group they want in a requisition if they create one manually.
the buyer usually looks in his worklist e.g. in ME57 by selection all requisitions that are assigned to him.
However, if the buyer 101 is the holiday replacement to 102, then the general concept allows that buyer 101 can pull the requisitions of buyer 102 and change the purchasing group to 101 in the PO.
If you dont want that, then restrict authorization based on object M_BANF_EKG (purchasing group in requisition)

Purchase Order Change Restriction after MIGO and MIRO

Hi Experts,
I'd like to ask why Purchase Orders are allowed for change even when the Material Document and Invoice is already created under them, unlike the Sales Order in SD. Or is this some kind of configuration where I can configure the restriction of changes in these Purchase Orders?
Thanks a lot!

Hi,
You can set Release Indicator in designing Release procedure of PO & set Release Indicator 1 where release Indicator 1 is used for purchasing document cannot be changed/Change not allowed after release. & then You can do GR & MIRO.
Regards,
Biju K

How to delete Purchase Order if they are open for 3mnts automatically?

Hi,
My client wants to delete Purchase orders from database if they are open for over 3mnths automatically & also system has to generate messages for Purchase orders for which an Goods receipt has been posted & if no invoice has been paid for a GR after 30 days system has to trigger message automatically asking to pay the vendor. How can this be done?
Regards
Chandan

Hi
pls refer the following link
Re: Automatic Close PO Outstanding

Want to see combination of Purchase Order and A/P report at material level

Hello,
Anyone familiar with an InfoProvider that will show a combination of Purchase Order and A/P data combined?
I'm specifically looking for a source that includes the PO information at the Vendor / Material level with order value and quantity at the time the PO was created AND accounts payable data at the Vendor / Material level with the invoiced amount and quantity (which may vary for the PO amounts).
Thank you,
Jim

Hi
Have you seen all of the follwoing datasources......
http://help.sap.com/saphelp_nw04/helpdata/en/df/fbb0d62f3a794d98d23609d17e1610/frameset.htm
Hope this helps
Regards
N Ganesh

Purchase Order is generated after MRP for Material with MRP Type ND

Similar Messages

Maybe you are looking for