Purchase order list(list of all tables that efect when i entered a po)

is there any script ,to know what all tables will effect when i entered po deatils
and i approve that etc..
if any list is there can any one tell me please.
regards
satish.

Hi,
when u go thru AP->Suppliers
create suppliers with all the details.
then query for the same supplier and go to its record history.
U will get vieews.
Go thru those views .so that u will get to know its altering tables.
or else
go thru po_vendors,
po_vendor_sites_all
po_vendor_contacts tales thru trms.
go to its primary tables.
u will get to know other tables which are altering.
--Basava.S                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

Similar Messages

  • How to list all  tables that belongs to the current user?

    hi all
    "select tblowner,tblname from tables where tblowner in (select user from dual);"
    I want a list of all tables that belongs to the current user. I use the SQL above, but given "no rows selectd",but if
    I replace the subquery with literal,like
    "select tblowner,tblname from tables where tblowner = 'JFMDB');".
    I got the list. why?
    Thnk u very much！

    This looks like a bug that was fixed in 7.0.5.13 and onwards. I can reproduce what you are seeing in 7.0.5.10.0 (Linux x86-64 / Access control enabled instance from root install) but not 7.0.5.13.0 (Linux x86-64 / Access control enabled instance from root install).
    Unfortunately I don't have a bug number to pass on. I can't see anything relevant listed in the Release Notes and I haven't found a likely candidate in our internal listings. This may well have been one that was fixed "in passing" when RnD were working on something similar.

  • Purchase order Vendor List

    if i am purchasing a material from 5 different vendors while raising the purchase order, my system should show only that particular 5 vendors in that 5 vendors i should select the vendor. is it possible in SAP??

    >
    Praveensap23 wrote:
    > if i maintain that while raising the PO if i click on the F4 button on vendor text field do i get the vendors who were supplying the materials for that paritcular material
    In F4 search help you have multiple search helps availabe, among them is vendor by material, if you have info records, then you will see there only your 5 vendors after you have entered your material.

  • Purchase Order released date field and table name

    Hi,
    Please tell me the  Purchase Order released date field and table name.
    Regards
    Deepak

    Hi,
    Table : EKKO.
    Fields : FRGKE,FRGZU.
    You can get release date of PO from CDHDR  table.
    give object value as your po number and check.dont forget to give leading zeros.
    The udate will be date field and transaction will be me29n for relaesed po.

  • How to retrieve all datas that lost when i update my iphone4 to that 6.10 ios. i tried to look at may i tunes in my computer but it seems that i forgot to perform back ups since i purchased this phone 2yirs ago.. pls send me an advice..thank u.

    how to retrieve all datas that lost when i update my iphone4 to that 6.10 ios. i tried to look at may i tunes in my computer but it seems that i forgot to perform back ups since i purchased this phone 2yirs ago.. pls send me an advice..thank u.

    All of the data should be on your computer, simply sync it back.
    If the update was done via iTunes on the computer, the first step in the process is a backup of the device.

  • The order of my ical 'all day' events changes when i go into print mode?

    The order of my ical 'all day' events changes when i go into print mode. What can i do to keep the order of events i so painstakingly created?

  • I want to link my other email accounts to my imail so I can see them all at once. When I enter their account information, imail says I'm using the wrong passwords but I know they are correct. What now?

    I want to link my other email accounts to my imail so I can see them all at once. When I enter their account information, imail says I'm using the wrong passwords but I know they are correct. What now?

    This was EXACTLY what I needed about the purchases I made from my device. However, is there a way to re-download other ones you've made from a computer? Because I realized some of them were not just purchased from my device.
    This is a picture of what it looks like now:
    http://tinypic.com/r/107quxu/7
    As you can see, the stuff circled in red doesn't give me an option to download from Cloud Beta because it already says "downloaded".
    any way to get around that?

  • I've purchased CS5 and want to upgrade to CC. When I enter my serial number it says I'm not qualified. Why?

    I've purchased CS5 and want to upgrade to CC. When I enter my serial number it says I'm not qualified. Why?

    You will have to check that with sales support directly. Nobody here can answer this question, even more so since it would require to know your purchase details and other confidential info like serial numbers, which would be stupid to share on a public forum. Try the web chat.
    Mylenium

  • HT1541 I purchased a$15 itunes gift card from Kroger and when I entered it  was told the number if not valid   Am I out of luck?

    I purchased a $15 itunes gift card from Kroger and when I entered the code it said it was not valid.  Am I out of luck or can anyone help?

    If this page doesn't help then you will need to try contacting iTunes support (you will need to give them the serial number and activation code from the card) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

  • Display archived purchase orders in Lists (e.g. ME2L)

    Hi everybody,
    Last week we upgraded our system to SP13 (ECC 6.0). Since then we have problems with our archived purchase orders.
    Usually all purchase orders (independent from where they are saved (archive or database)) are displayed in standard reports like the ME2L. Since the upgrade we cannot access the archived POs when we start the ME2L.
    When I use SARA (e.g.: RM06ER30) to read the archive it works. When I start the ME24N and pic a archived purchase order it works fine too.
    I have two questions now:
    1.) I'm not 100% sure if the old behavior was standard or if some modification has been carried out in our system some time ago. Can anybody tell me if archived POs are displayed in MM-lists like the ME2L in SAP-standard?
    2.) Does anybody has a solution how I can fix that?
    Thanks upfront and kind regards
    Alex

    Hi,
    I was over looked! Please check below tables
    Please check the arciving procedure from SAP help
    SAP Library - Materials Management (MM)
    VARCHIVEKEY find  in table ADMI_FILES ( *MM_EKKO)
    Below FM's
    MM_EKKO_AS_SHOW
    MM_EKKO_02_DISPLAY_DATA

  • To Find MIGO, MIRO No of a Purchase Order and List Of Vendors ?

    Hi Experts,
    Required your inputs on the Following, Please Guide.
    1) My End user has created a Purchase order, and he has done G.R and followed invoice also. And he doesnt remember the G.R Number and Invoice Number, for that Purchase Order.
    a) How and where to find GR Number and Invoice Number for that Purchase Order ?
    b) Please sugest is there any transaction to find the GR Number and Invoice Number ?
    c) How to Find the Open Purchase orders? Is there any transaction to look Over Open Purchase Orders ?
    2) My Enduser has Created Vendors with respect to different Company Code.
    a) Is there any Standard report to find the List of Vendors with respect to Company Code ?
    Please advice with your Valuable inputs.
    Best Regards
    Javeed

    Hi,
    Go to transaction code ME23N and then at item level click on tab called u2018Purchase order historyu2019 for the particular item. You can see both GR & Invoice doc. No.
    Transaction ME2L to see the open PO.In the selection screen of this T code please select Scope of List u2013 ALV AND Selection Parameters u2013 WE101 . Then execute. You will get open Pos.
    Regards,
    Manish

  • BAPI for Purchase Order Confirmation and update EKES table

    Hi all,
    I have a requirement to update the PO confirmation soon after successful creation of PO in an IDOC.
    I have used BAPI_PO_CHANGE function module which didnt serve the purpose as it cannot update confirmations.
    I tried using ME_CONFIRMATION_UPDATE where I was able to add a confirmation entry in EKES table but that is not being reflected in ME23N transaction when I display the PO.
    Please help me out on this.
    Thanks & Regards
    Pavan

    NB: Never use a standard update FM (check attributes of ME_CONFIRMATION_UPDATE) its often only a SQL statement collector without any check, logging of changes or database consistency, if you perform a where-used you should find it is never called alone but with a bunch of other update FM after checks and other update preparation.
    Get back to the BAPI and table parameter POCONFIRMATION, also use BAPI_PO_GETDETAIL1 to get current data for the call of BAPI_PO_CHANGE.
    Regards,
    Raymond
    PS: If it is not in 197958 - BAPIs for purchase orders: Missing functions, you should be able to do it

  • How to find all tables that are associated with a given domain name.

    I want to find all table, excluding the structures, of a given domain name, say, waers.
    Some of the tables are directly contains the domains while others are related with a data element which is connected to that domain.
    I want to find tables for all two case -either tables connected directly to the domain or connected via data element- and exclude the structures.
    thanks in advance.

    Hi,
    The following thing may help you.
    in se11-> search for tables having names like 'DD*'.
    From this list of tables you can find the required table to get domain, data element nad table name.
    one way of doing it:
    SELECT rollname domname
      FROM dd04l
      INTO CORRESPONDING FIELDS OF TABLE it_tab.
    SELECT rollname tabname
      FROM dd03l
      INTO CORRESPONDING FIELDS OF TABLE it_tab1
      FOR ALL ENTRIES IN it_tab
      WHERE rollname = it_tab-rollname.
    SORT it_tab1.
    DELETE ADJACENT DUPLICATES FROM it_tab1.
    LOOP AT it_tab1 INTO wa_tab.
      MODIFY it_tab FROM wa_tab
      TRANSPORTING tabname
      WHERE rollname = wa_tab-rollname.
    ENDLOOP.
    LOOP AT it_tab INTO wa_tab.
      WRITE:/ wa_tab-domname,
              wa_tab-tabname.
    ENDLOOP.
    Regards,
    Manoj Kumar P

  • Jump from Sales Order to Purchase Order and back again (all in change mode)

    Hi,
    Situation is this:
      - Sales Order is created with 10 items. 4 items are created with connection to Purchase Order.
      - User open Sales Order in change mode
      - User goes to item 20 that has a related Purchase Order
      - User wants to jump to related Purchase Order and make an update here
      - User wants to be able to jump back to Sales Order Item 20 from Purchase Order
    When user jumps to Purchase Order in change mode, then this Purchase Order will also block the same Sales Order, that was open. This can be handled with dequeue and enqueue.
    Problem is that when Purchase Order is saved it will make an update to the Sales Order in the background. When user jumps back to Sales Order then this Sales Order is still open with old data and these data does not reflect data that can have been updated by the Purchase Order.
    Also: When Purchase Order is making updates to the Sales Order then e.g. Message Out Table NAST is automatically updated (insert and delete records). If user then manually updates the Sales Order with old information, then System Dump appears as Sales Order tries to insert NAST records, that have already been inserted or delete NAST records that have already been deleted via the Purchase Order.
    This means that when user jumps back from Purchase Order to Sales Order Item 20 then Sales Order needs to be refreshed with new data after Purchase Order has saved the Sales Order.
    Are there any solution to do this in a standard way (from within SAPMV45A) ?  
    I prefer not to reopen Sales Order using syntax like CALL TRANSACTION.

    Hi,
    Thanks for reply.
    In third party PR gets created automatically but PO gets create manually.So changes get refelect in PR only not in PO.
    Can you give me the solution for completing this task.
    Thanks & Regards
    Jalaj garg

  • When receiving a purchase order in Northwind, receiving all records when press on a button

    Good morning,
    This is a challenging request, I did not figure out how to receive all items at once in the receiving tab. I have created a button named "Post test" on which I have a test code that doesn't do exactly the right thing. I am posting the code from
    the original database that works, but we have to do the receiving one row at a time, it is ok when we have few products on a purchase order, but when a user has 150 items, this is becoming time consuming.
    So here is an image follow by the original the codes. (The code on the button is at the end of that document, you might want to begin there) is you understand my error faster.
    Here is the link for accessing the Northwind database and a document on OneDrive
    https://onedrive.live.com/redir?resid=F7190044A52FAE85%21663
    My code on the button "Post test":
    Private Sub Post_test_Click()
    Dim InventoryID As Long
    Dim ProductID As Long
    Dim Quantity As Long
    Dim PurchaseOrderID As Long
    Dim InvoiceID As Long
    PurchaseOrderID = Nz(Forms![Détails bon de commande].[Réf bon de commande], 0)
    Dim rsw As New WrapperJeuEnregistrements
    With rsw.GetRecordsetClone(Forms![Détails bon de commande].sbfPurchaseReceiving.Form.Recordset)
    While Not .EOF
    .Edit
    ![Date de réception] = Date
    ![Entré en inventaire] = True
    ProductID = Nz(Me![Réf produit], 0)
    Quantity = Nz(Me![Quantité], 0)
    InventoryID = Nz(Me![Réf inventaire], 0)
    If Inventaire.AddPurchase(Me![Réf bon de commande], ProductID, Quantity, InventoryID) Then
    If InventoryID > 0 Then
    Me![Réf inventaire] = InventoryID
    Me![Entré en inventaire] = True
    End If
    End If
    If InventoryID > 0 Then
    Me![Entré en inventaire] = True
    End If
    rsw.Update
    rsw.MoveNext
    Wend
    End With
    Forms![Détails bon de commande].Requery
    End Sub
    I did have a post last week, but I have received 1 answer that specified that the original code was missing...
    Thank you for your time...
    Claude from Québec, Canada
    Claude Larocque

    Hi Claude,
    I have downloaded the files and I tried to do as the steps in the document, but failed. When I tried to open the forms I got the error message "Item not found in this collection".
    >>I did not figure out how to receive all items at once in the receiving tab
    In my option, if you want to get all the items, yo​u could add a new query. You could query all the items you want and add a button to the form, when you want to show the all items, you could click the button to run the query. I have viewed the code you
    provided, you requery the "Détails bon de commande" form which did not change the query statement, I think you could add a new form and bind a new query to it.
    >>however, this is the model created by Microsoft that we can use in Access 2010 and 2013
    This model is much complex and the logic of the model is complex too, as your description, some parets of the code is useless, I think we could recreate a new empty database and create the forms which are needed instead of modifying it in the original version.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

Maybe you are looking for