Purchase Order - ME21N/ME22N - Defaulting custom field in EKPO table

Hi,
I checked the forum for answers but couldnt find any relevant ones.
We have a custom field in one of the custom screens at Item level. This date field needs to be defaulted with the delivery date during create/change if the value is blank.
Problem occurs when user blanks out the existing value in this field and it is supposed to get defaulted to delivery date again.
I am capturing the PAI value (blank) in method Transport_to_model and exporting it to the customer exit EXIT_SAPMM06E_018 which sets the user entered value in structure E_CI_EKPO.
Then, i try to default the value of this field back to delivery date in method PROCESS_ITEM by using set_data.
Whenever the user blanks out the value in the screen, it goes for an infinite loop and finally times out.
I see that the method PROCESS_ITEM is getting called afresh infinitely. The set values is gone, ie, the default value set in set_data is also blanked out when it arrives in PROCESS_ITEM again.
Before debugging further, i thought i will post this in case anyone has faced the same issue.
Appreciate your time.
Regards,
Bikash

Hi Savitha,
Not sure if this is going to help much..but heres wat i put in PROCESS_ITEM
        wl_mepoitem-yyreqdate = wl_mepoitem-eindt.
          CALL METHOD im_item->set_data
           EXPORTING
           im_data = wl_mepoitem.
wl_mepoitem contains the po data fetched using get_data in the initial part of the code.
I have also done a workaround such that now, in method Transport_to_model, i dont pass the blank value to the user exit when a user blanks out the value, instead i default it in this method itself to the delivery date and the user exit sets the value for me. Now, PROCESS_ITEM doesnt go into the infinite loop. This surely hints towards something to do with me setting the value blank in the user exit and then trying to default it in the BADI.. somewhere the system is getting confused here..
Regards,
Bikash

Similar Messages

  • Purchase order ME21N ,ME22N Cost center validation against GL

    HI,
    I'm validating the purchase order cost center against the G/L , if a particular entry is not found against G/L in a custom table
    the BADI -ME_PROCESS_CUST_PO Method -->PROCESS_ACCOUNT should raise error message and append in the collector.
    i was able to append the error message in the collector and still PO is able to save , but when re-open the PO the error message is cleared from the message collector.
    any idea why the message is disappearing from the PO error message collector?
    here is my code:
    INCLUDE mm_messages_mac.
      DATA: ls_acct TYPE mepoaccounting,
            lt_zgl_cc TYPE zgl_cc,
            ls_customer TYPE mepo_badi_exampl,
            ls_tbsg     TYPE tbsg.
      ls_acct = im_account->get_data( ).
      IF NOT ls_acct-kostl IS INITIAL.
        SELECT SINGLE  * FROM zgl_cc INTO lt_zgl_cc WHERE
                                         glacc      = ls_acct-sakto AND
                                         costcenter = ls_acct-kostl.
        IF sy-subrc NE 0 AND  ls_acct-sakto GE '0000500000'.
          mmpur_message_forced 'E' 'ZM' '048' TEXT-003 ' '  ' ' ' ' .
          CALL METHOD im_account->invalidate( ).
        ENDIF.
        else.
        mmpur_remove_messages_by_id ls_acct-id.
      ENDIF.

    Hi,
    have you tried to invalidate item instead of account assignment? You can get a reference to item with method GET_ITEM. I can see only one class which implements interface IF_PURCHASE_ORDER_ACCOUNT_MM. It is CL_PO_ACCOUNTING_HANDLE_MM and this class has no code for this method.
    Cheers

  • Adding Partner into Purchase Order (ME21N, ME22N)

    Hi,
    I want to add a parnter into purchase order. Logic of determining of partner is very complex and I have to write a program for this purpose.
    Are there any user exit where I can include this program and add additional line into EKPA?
    Thanks in advise,
    Hristo Hristov

    Hi Sanjay,
    All parameters of method POSTED of this BADI are "importing" - I can't add parntner into IM_EKPA
    I need to add partner into PO and then use this partner role into output determination of same purchase order.

  • INFO UPDATE in the purchase order ( ME21N)

    Why the field INFO UPDATE in the purchase order ( ME21N) is not flaged when I create a purchase order?
    I create a PO, and I flag it in ME21N, but it cancel it? WHY
    I have already tried it in spro Default values for purchasing, and all seem good!!
    Anybody could tell how can I tick this field?
    Thanks a lot
    Kari

    Hi
    Info update indictor can be set by defualt if you maintain the same in the Purchase inforecord,
    If no inforecord exists then this would not be flagged and if you flag it then the Purchase inforecord gets created with the update of with or wothout plant based on the default value assigned to the buyers.
    Thanks & Regards
    Kishore

  • Purchase order number of the customer equals to the batch number

    At our case, purchase order number of the customer equals to the batch number. Purchase order number will be written on the sales document (VBKD - BSTKD).
    1. How can the production department can see what is written in this field (on md04 or etc...)? The batches will be created by the PP module so they have to see what is written on this field to give the right number to the batch externally (when creating the batch manually).
    2. If batches are automatically created, how can we make the batch number to be equal to the purchase order number which is written on the sales document (VBKD - BSTKD)?
    I'll be happy for the answers and I'll also be happy if you can give me the names of the user exits for the above questions. Thanks in advance for the answers....

    Hi Yasar?
    Did you evaluate working with valuated sales order stock?
    This way your PP people could use Make to Order style manufacturing and produce for a special "batch" => The sales order special stock.
    Can be used in Repetitive Manufacturing and has no impact in costing, therefore a nice option for the situation you are describing.
    In MD04 a special segment will appear for the the Sales Order stock and this stock will only be able to be shipped for this special order.
    Best Regards,
    Franck

  • Hi, In purhcase order(me21n) ,Me22n,Me23n

    Hi,
         In Purchase order(me21n), payment terms(Invoice tab) should be filled on 'Z511'. pls can u sent me right exit.
    Regards
    senthil

    Hi Senthil,
    As the payment terms are derived from the vendor master you can enter the payment term Z511 vendor master, it will automatically filled in Invoice tab of Purchase order.
    Regards,
    Manish

  • What is the BADI  while SAVING purchase order using me22n?

    what is the BADI  while SAVING purchase order using me22n?
    while i will save purchase order through me22n, badi should be fire what is badi for that?
    regards,
    dushyant.

    Dushyant,
    Hopefully you know how to implement the BADI ME_PROCESS_PO_CUST now.
    The following are the codes that you can put in the method "Post".
      DATA: LW_HEADER        TYPE MEPOHEADER,
            LW_POSTED_HEADER TYPE MEPOHEADER,
            LW_VALID         TYPE MMPUR_BOOL,
            ITAB_ITEM        TYPE PURCHASE_ORDER_ITEMS,
            LW_ITEM          TYPE MEPOITEM,
            ITEM_INTERFACE   TYPE PURCHASE_ORDER_ITEM,
            ITAB_ACCT        TYPE PURCHASE_ORDER_ACCOUNTINGS,
            ACCT_INTERFACE   TYPE PURCHASE_ORDER_ACCOUNTING,
            LW_ACCT          TYPE MEPOACCOUNTING,
            LW_POSTED_ACCT   TYPE MEPOACCOUNTING,
            W_ACCT_CHANGED  TYPE C,
            W_GRANT_AMT      TYPE EKPO-NETWR,
            W_FINANCE_AMT    TYPE EKPO-NETWR,
            W_FLAG           TYPE C.
    Check if PO header data is valid
      CLEAR LW_VALID.
      CALL METHOD IM_HEADER->IS_VALID
        RECEIVING
          RE_VALID = LW_VALID.
      CHECK LW_VALID = 'X'.
    PO header data is valid
    Get the newly updated PO header data
      CLEAR LW_HEADER.
      CALL METHOD IM_HEADER->GET_DATA
        RECEIVING
          RE_DATA = LW_HEADER.
    Get the posted PO header data
      CLEAR LW_POSTED_HEADER.
      CALL METHOD IM_HEADER->GET_PERSISTENT_DATA
        IMPORTING
          EX_DATA = LW_POSTED_HEADER
        EXCEPTIONS
          NO_DATA = 1.
      IF SY-SUBRC <> 0.
        CLEAR LW_POSTED_HEADER.
      ENDIF.
    Get PO line items
      REFRESH ITAB_ITEM.
      CALL METHOD IM_HEADER->GET_ITEMS
        RECEIVING
          RE_ITEMS = ITAB_ITEM.
      LOOP AT ITAB_ITEM INTO ITEM_INTERFACE.
    Check if PO line item is valid
        CLEAR LW_VALID.
        CALL METHOD ITEM_INTERFACE-ITEM->IS_VALID
          RECEIVING
            RE_VALID = LW_VALID.
        IF LW_VALID <> 'X'.
    This PO line item is not valid
          CLEAR W_ACCT_CHANGED.
          EXIT.
        ENDIF.
        CLEAR LW_ITEM.
        CALL METHOD ITEM_INTERFACE-ITEM->GET_DATA
          RECEIVING
            RE_DATA = LW_ITEM.
    Get the account interface
        REFRESH ITAB_ACCT.
        CALL METHOD ITEM_INTERFACE-ITEM->GET_ACCOUNTINGS
          RECEIVING
            RE_ACCOUNTINGS = ITAB_ACCT.
        LOOP AT ITAB_ACCT INTO ACCT_INTERFACE.
          CLEAR LW_ACCT.
    Get the newly updated PO item data
          CALL METHOD ACCT_INTERFACE-ACCOUNTING->GET_DATA
            RECEIVING
              RE_DATA = LW_ACCT.
          CLEAR LW_POSTED_ACCT.
    Get the posted PO item data
          CALL METHOD ACCT_INTERFACE-ACCOUNTING->GET_PERSISTENT_DATA
            IMPORTING
              EX_DATA = LW_POSTED_ACCT
            EXCEPTIONS
              NO_DATA = 1.
          IF SY-SUBRC > 0.
            CLEAR LW_POSTED_ACCT.
          ENDIF.
          IF LW_ACCT-LOEKZ <> LW_POSTED_ACCT-LOEKZ OR
             LW_ACCT-KOSTL <> LW_POSTED_ACCT-KOSTL OR
             LW_ACCT-PRCTR <> LW_POSTED_ACCT-PRCTR OR
             LW_ACCT-PS_PSP_PNR <> LW_POSTED_ACCT-PS_PSP_PNR.
    Account assignment was changed
    We will force this PO to go through workflow
            W_ACCT_CHANGED = 'Y'.
          ENDIF.
        ENDLOOP.
      ENDLOOP.

  • BADI / User exit for Purchase order(ME21N) after saving the document

    Hi expert,
    I need the BADI / User exit for Purchase order(ME21N) after saving the document
    This is for email sending after create the purchase order so PO document number will be the import parameter
    pls help me
    point will be reward
    Regards,
    Ganesh

    Hi Ganesh,
    Could you please share your solution?
    Thanks.
    Hoops
    Edited by: Hoops on Jun 13, 2011 10:51 PM

  • Changing Purchase Order through ME22N

    Hi,
    We are experiencing a problem with the following cenario:
    The PO was created in environment with a purchase requisition,a agreement and it was already some subsequent documents then this PO was migrated to another environment but only the PO. I mean the Purchase Requisition, the agreement and also the subsequent documents were not migrated to the new environment.
    We need to change the quantity of this PO but when we try to save the new quantity it says that the agreement do not exist. And when we try to remove the agreement and the purchase requisition the system do not allows, the fields are closed to edit.
    Is there a way to remove this relation between the PO and the Purchase Requisition and the agreement to edit the quantity of the PO item?
    Thanks,
    Rafael

    Thanks for you answer.
    Now I have another doubt, if we have the purchase requistion and the agreement removed from the EKPO table, would we be able to modify the PO item quantity? Even if we already had a partial goods receipt?
    Thanks,
    Rafael

  • Moving data from custom fields to ekko table

    Hi Experts,
    I added new custom tab into me21n,me22n,me23n header thro me_gui_po_cust and me_process_po_cust.
    If i enter values in my custom fields, transport_from_model this method is not triggering.i have written below code in this method.
    METHOD if_ex_me_gui_po_cust~transport_from_model.
      DATA:     l_header  TYPE REF TO if_purchase_order_mm,
                ls_mepoheader  TYPE mepoheader,
                ls_customer TYPE ci_ekkodb.
      CASE im_name.
        WHEN subscreen.
          mmpur_dynamic_cast l_header im_model.
          CHECK NOT l_header IS INITIAL.
          ls_mepoheader = l_header->get_data( ).
          CALL FUNCTION 'ZMM_GET_DATA'
            EXPORTING
              im_ebeln       = ls_mepoheader-ebeln
    *            im_ebelp       = ls_mepoheader-ebelp
           IMPORTING
             ex_data        = ls_customer .
          MOVE-CORRESPONDING ls_mepoheader TO dynp_data_pbo.
          MOVE ls_customer-ztender TO dynp_data_pbo-ztender.
          MOVE ls_customer-zemdapplicable TO dynp_data_pbo-zemdapplicable.
          MOVE ls_customer-zpbgapplicable TO dynp_data_pbo-zpbgapplicable.
          MOVE ls_customer-zemdamount TO dynp_data_pbo-zemdamount.
          MOVE ls_customer-zemdvalidity TO dynp_data_pbo-zemdvalidity.
        WHEN OTHERS.
      ENDCASE.
    ENDMETHOD.
    i cant move my values entered in custom fields to ekko table.
    please help if u know..
    regards,
    Kavitha
    Edited by: Matt on Mar 23, 2011 10:55 AM added  tags

    Hi,
    check this out.. !!
    Import data from Excel to Oracle Database and
    Added link From Ask Tom.. your requirement you would be satisfied.. I supppose.. !!
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:908428873069
    - Pavan Kumar N

  • Add a custom-field in the table MARC and manage it in MM01/MM02/MM03

    Good day to all of you!
    I have this task: To add a custom-field to the table MARC. This custom-field will be managed through the MM01/MM02/MM03 transaction as follows:
    In the Basic Data 1 or Basic Data 2 the custom-field data will be added. Let's say the field is MATNR OBSOLETE.
    I have searched and implemented the things in customizing: Made a copy of function group MGD1, added the field on the screen.
    MY PROBLEM! How to manage it??? When the user enters MM01/MM02/MM03 and update this field, the field should be updated in MARC.
    1. I am not sure that this custom-field should be on Basic Data1 or Basic Data2.They want it at plant level.
    2. How to manage the data transfer from SAP Standard Program and my Custom Function Group.
    PLs: Do not paste me link to sap technical site with that example, because there takes the custom fields and UPDATE a CUSTOM TABLE. I need to update MARC!
    All the documentations i have read until now tell you how to add the field, ONLY the first part of the SOLUTION.
    Any help, pls?
    Good day and thank you!

    Hi Alex,
    In which way you are trying to update that custom filed. Have you written any logic in EXITS/BADIS?
    http://pavelgk.pbworks.com/f/6729224-Implement-Screen-Exit-for-MM01-Adding-New-Fields-in-Screen.pdf
    and
    Just read the OSS note mentioned earlier.
    Symptom
    You want to integrate customer-specific fields in material master maintenance.
    Other terms
    SAPLMGMM, RMDATIND, ALE, CI_MMH1, EXIT_SAPLMGMU_001 
    Solution
    To add customer-specific fields to an existing material master table (such as MARA or MARC) , you can proceed as follows as of Release 3.0C:
          1. Use an append structure to add the fields to the required table in the Dictionary (this is not a modification; for details, see the SAP document "ABAP/4 Dictionary"). In Release 3.x, the length of the field names must be the same as  the standard five character fields. This is necessary because of dynamic assignments. As of Release 4.0A, the lengths of the field names can be longer than five characters. If the changes of the fields should be recorded in the change document and taken into account during ALE distribution, set the 'Change document-relevant' indicator for the corresponding data elements. For table MARA in Release 3.x, you must also enhance the database view MARU because the database changes are carried out using this view. This small modification is no longer necessary as of Release 4.0A because the database view MARU is enhanced automatically when you enhance table MARA or the include EMARA (which is the data part of table MARA).
          2. Enhancing online maintenance in customized material master maintenance:
          Define a subscreen with your customer-specific fields in a customer-specific function group created as a copy of the standard function group MGD1.
          In Customizing, assign this subscreen to a maintenance screen using the "Copy customized material master" function. For details, see the Implementation Guide (IMG). As of Release 4.0A, program COPYMGD1 is available. You can use this program to create customer-specific function groups as required. This program is also incorporated in the Customizing function 'Configure customized material master'. Ensure that each field of the subscreen has a field statement in the flow logic, otherwise the data is not transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
          If you want these fields to be subject to standard field selection, you must add new entries for them to the central field table for material master maintenance (T130F): 
          Application examples for standard field selection:
          The field is mandatory and is to be flagged with a "?".
          The field belongs exclusively to the purchasing user department. Purchasing data and MRP data are both contained on one screen. However, the MRP controller is not to see the purchasing data.
          The following data is required for each field:
                a) Field name        (T130F-FNAME)
                b) Field selection group (T130F-FGRUP)
                Here, you should use a standard field group if the customer field is subject to the same field selection as the standard fields of the standard field group. If it is not, use a customer-specific field group.
                You must then check and, if necessary, modify the attribute of the field group using the function "Maintain field selection for data screens" in Customizing under "Logistics Basic Data -> Material Master".
                Field groups 111 through 120 that are not used in the standard system are reserved as customer-specific field groups. As of Release 3.0F, additional customer field groups are available. (For details, see the IMG).
                c) Maintenance status (T130F-PSTAT)
                List of the user departments that may maintain the field. You can display possible values by using the input help for the maintenance status field in the Customizing activity "Configure Material Master" when maintaining logical screens.
                d) Reference        (T130F-KZREF)
                This indicator must be set if the field from the reference material should be proposed during creation with reference.
    Note: You cannot yet use Customizing to enhance table T130F; you can use only transaction SE16 (Data Browser) or transaction SM31. Future releases will include a separate Customizing function for maintaining customer-specific fields. See Note 306966. By implementing this note you can add entries to table T130F within Customizing. This type of maintenance is possible as of Release 4.5B.
    You may change the entries for standard fields only with regard to the reference data and field selection group. Changing other data for standard fields constitutes a modification. Therefore, you cannot use the Customizing function "Assign Fields to Field Groups" to change this data.
    In addition, you must not add new standard fields to table T130F.
          3. If you want to maintain customer-specific fields using data transfer by direct input or via ALE distribution, proceed as follows:
          Add the fields to central field table T130F (see above).
          Add the customer-specific fields to the data structures for the data transfer (for example, BMMH1 for the main data).
          Also, add the customer-specific fields to the tables in which the incorrect data is stored during direct input. These tables have the same name as the corresponding master data table and also have the suffix _TMP.
          For example: If you add customer-specific fields to table MARA, you should add the same fields to table MARA_TMP.
          If you use ALE, you must also add fields to the IDoc. To process enhanced IDocs, you can use enhancement MGV00001 with customer exit EXIT_SAPLMV01_002 for creating the IDocs and customer exit EXIT_SAPLMV02_002 for posting the IDocs.
          Prior to Release 3.0E, enhancing structure BMMH1 constitutes a modification. In this case, you must add the new fields tot the end of the structure before the last field (SENDE = record end indicator).
          As of Release 3.0F, structure BMMH1 contains the customer include CI_MMH1, which is part of the enhancement MGA0001. Here, you must proceed as follows:
                a) Add the customer-specific fields to include CI_MMH1.
                The names of the fields in CI_MMH1 must be identical to those of the corresponding fields in material master tables MARA, MARC and so on.
                Important: The fields must be CHAR type fields. Therefore, create CHAR type data elements whose lengths are identical to the output length of your fields in  table MARA and so on. Use these data elements in include CI_MMH1, but use the field names from table MARA and so on.
                b) Activate include CI_MMH1.
                c) If you have not used customer structure ZMMH1 before, create it as a copy of structure BMMH1 and delete the standard fields that you do not require. You are not permitted to delete field STYPE and include CI_MMH1 when doing this. If you have already used structure ZMMH1, add include CI_MMH1 to it.
                d) Activate structure ZMMH1. This also adds the customer-specific fields to ZMMH1.
    Run program RMDATING. This program generates routines which are supplied to your customer-specific fields from the input file. As of Release 4.5A, you also need to activate the routines/function modules generated by program RMDATING (especially, the MAT_MOVE_BMMH1_XXXX modules). Details about this subject (especially the procedure when using customer structure ZMMH1) are described in the IMG for transferring the material data under item 'Maintain Transfer Structure'. Also, check the declaration of structure WA in program RMMMBIMC to see whether it is declared with sufficient length. If necessary, enhance the declaration (for the time being, this still constitutes a minor modification).
    In addition, lengthen domain DI_DATA with CHAR 5000. As of Release 3.1H, this has already been done.
    Important: When using customer-specific fields, you can use only structure ZMMH1 to transfer the data. Otherwise, after the next SAP upgrade which contains new standard fields in structure BMMH1, the input files no longer match. If you want these new standard fields to be transferred, add them after your customer-specific fields (the order of the fields in structure ZMMH1 does not need to be the same as the order of the fields in BMMH1).
    If you want foreign key dependencies or fixed domain values to be checked, or another check for a customer field, this is possible up to and including Release 3.0D only by modifying the corresponding check function modules. As of Release 3.0E, you can use function exit EXIT_SAPLMGMU_001 (SAP enhancement MGA00001) for these purposes.
    If you want to use engineering change management to schedule future changes for your customer-specific fields or you want to use the 'Display at Key Date' function, execute program GENERATE in addition. This program generates the necessary assignments for interpreting the change documents. With regard to engineering change management, you must read Notes 60281, 60973, and 48962.
    To date, it is not possible to integrate customer-specific tables in material master maintenance without making a modification. However, you can create customer-specific development objects containing the essential additional logic. You can then integrate these development objects in your system as part of only a minor modification.
    check this link. It may helps you to solve your issue.
    Thanks
    Sravan

  • To Update Custom field in mch1 table through MIGO Tcode

    Dear champs,
    I have added one custom field in mch1 table ( date ).
    Now , In MIGO Tcode when i am doing posting, MCH1 table is also updated.
    I want to know how to update my custom field in mch1 table at the time of posting.
    Please tell me where to write logic to update mch1 table.
    Regards,
    Satyen Trivedi

    Hi Satyen,
           what data has to be update in MCH1 table new field, for this did you added any screen or you want to implement your own custom logic.
    1) if you implemented the screen , then you have to write logic there itself.
    2) If you want to update through custom logic , then you takeup with the  Enhancements or BADI.
    Regards,
    Krishna

  • Custom field in BP_PDBGP table not getting updated

    Hi,
    i am working in Contract management in SRM 7.0 Pack 6. I have aadded a custom field in partner table which appears in the partner table of contract header. It is a checkbox. when i check it the value gets saved in BBPPDBGP table for the first time after that if i try to uncheck it the value is not getting updated. I checked in the BBP_DOC_CHANGE_BADI, the value which is getting passed is correct but it doesn't update the databse accordingly.
    Any suggestions? is this a standard bug?
    Neha

    Hi Virendra,
    Thanks a lot for your suggestion.
    Where should i check? If the data passing to BBP_DOC_CHANGE_BADI is correct then that means at the webdynpro side there should not be any problem and as per the standard after doc_change also it should save properly. i also checked the badi there is not dependent coding done over there. DOC_SAVE badi is also inactive for contract business object. Hence, i am not getting any clue where could be the problem.
    Let me know if you want more details inorder to analyse this problem.
    Thanks &Regards,
    Neha

  • Regarding adding a Custom field to Standard Table

    Hi ABAPers,
    Can any one explain the below spec-description.
    "The purpose of this design is to provide the foundation for a more automated solution to the invoice reconciliation process.  This design calls for adding a custom field to the standard SAP table EINE as well as a data maintenance tool for the same.  There will also be a new custom table for storing values associated with the new EINE field.  These new tables will also provide users with the ability to determine which PIR are soon to expire."
    We have to add one custom field to standard table EINE, how we can add this custom field to STND table.
    According to me we can add it through append structure. is it correct or not.
    and what is data maintenance tool.
    Pls.............Explain in details.
    Thanks in advance.
    Regards,
    Ramana Prasad. T

    Hi,
    Goto SE11 ,give ur table name.Then press display button.Then in the application tool bar press on append structure ...Now create a zstructure and add ur custom field and then activate the table.
    Regards,
    nagaraj

  • Custom fields in migo table control not updating

    hi ,
    This is to have your valuable suggestion , wrt , following issue..
    In transaction MIGO , i have to add two fields uebto and untto in table control .
    I am able to add them in table control, but some how not able to pick data for these fields .
    error coming is :
    " System error: Incorrect Customizing for field
    ZZUEBTO".
    if any face such type of issue , answer me .
    Thanx,
    jeet

    Hi,
    Thanks for your reply.  I have added the custom fields in the item detail.  But the customer wants the custom fields in the table view also.
    Is there any screen exit available to modify the table control of MIGO?
    Thanks.

Maybe you are looking for