Purchase order not appearing as commitment for next fiscal year in KOB2

Hi Experts
Any help on this is highly appreciated.Our Fiscal year 2008 is ending on 27th september and fiscal year 2009 will start on 28th September.
We have some purchase orders created with delivery date as 30th september which falls into next fiscal year. Somehow these purchase orders are not appearing as commitments in KOB2 report even with data ranges for next fiscal year.
However we have many similar Purchase orders with delivery date in fiscal year 2008 with same internal order as account assignment and they are correctly appearing as commitments in KOB2 report.
Can you please let us know what could be the reason for purchase orders with delivery date as 30th september not appearing in KOB2 report.
Regards,
Santosh

Hi Ashok
Thanks for your continued support on this. I was going through these notes today.
One observation I made was cost elements in our system were valid till 27th september only when problematic POs were created.However their validity was subsequently extended after the creation of Purchase orders.This might be the reason for system not recognising these POs as commitments.
SAP Note 534993 seems to suggest that we need to run report RKANBU01 for all such purchase orders to redetermine commitments.I am in the process of testing this out in our systems.
Could you please let me know if my understanding is correct. Thanks again.
Regards,
Santosh

Similar Messages

Open Purchase Orders not considered as requirement for MRP Run

Hi ,
We are facing a issue of Open Purchase orders not appeared in Stock requirements list and also it is not considered as requirement for MRP Run against reservation.
As aresult for a reservation demand of 10 units we are ending with Open POs 10 units and a additional planned order 10 units.
Material Type : ERSA
MRP Type : PD (or VB)
Lot size : EX ( HB if MRP Type is VB)
Could you please throw some light to correct our settings to MRP to consider Open POs?
Saravanan

Can you check to see if there is a re-order point set up for this materia? That could be causing the problem too.

How to get a Monthly Depreciation Simulation for next fiscal year?

I need a report that give me the depreciation simulation for next fiscal year, but I need it monthly wise. I run report S_ALR_87012936 with report date 31.12.2011 and evaluation period = month.
The report gives the error message AA669 Fiscal year 2011 is already closed in Financial Accounting
I read that this report doesn't work monthly wise for future years. Is there a workarround?
Best regards!

Hi,
I'm sorry there is only RASIMU02. Note 396974 describes, this is a missing functionality and there is no workaround.
Reports on derived depreciation areas that do not post any values to the
general ledger are allowed with the evaluation period year. An
evaluation using month, quarter or half-year is not supported.
In general, the depreciation forecasted by monthly in report RASIMU02 are only for depreciation area which posts depreciation to GL. For non-GL posting area, we recommend you simulate the depreciation
in 'fiscal year' mode. if you simulate the depreciation
Basically RASIMU02 is NOT designed to provide period simulation for these non posting areas. This because RASIMU02 uses for periods which have been posted already the created ANLP. But ANLP´s are not created for non-posting areas. So in these periods where a depreciation run had been executed already, RASIMU02 will not show
values.
For AA 669 please see:
Best Regards Bernhard
Edited by: Bernhard Kirchner on Nov 25, 2010 9:20 AM

You have not maintained a rule for the fiscal year variant

1) I have Fiscal Year Variant in the Cube ( it got added along with fiscal year ) but there is no Fiscal year variant in the datasource & when I dont map it Transformation activation prompts error " You have not maintained a rule for the fiscal year variant ".
Can I just delete Fiscal year variant from the cube..does it matter?
2) Fiscal year & Posting Period can be populated from Fiscal Period, is the vice versa possible..? Does the sytem will take care of the conversion..?

1. no, you should not delete and you cannot delete fiscal year variant from cube, it's required by fiscal year/ period (compound infoobject), you should add it in your datasource, or you can map with a constant value e.g K4
2. yes, fiscal period can be populated by posting period
some info on time characteristic relationtionship
http://help.sap.com/saphelp_nw70/helpdata/en/44/be8b631c743959e10000000a1553f6/frameset.htm
hope this helps.

ME 9F - P.O Amendment to purchase order not appearing

Hai,
Recently we moved from ECC 5 to ECC 6
We face a issue in P.O printout
Eg:- When the P.O created & released now the print taken and found okey. (no goods are inwarded)
in this condition After taken the printout , Thru ME22N , i am adding 2 more line items in the p.o & deleted the existing line items and inserted some text in the Headed text . due to value changes , its been released, if we take the printout thru ME9F
The following issue noticed.
1) The Header text which is inserted its not appearing in the P.O
2) " The AMENDMENT to Purchase order " should come at the Top of the P.O , its not coming.
But same getting is working if we test thru ECC 5.0 ,
Is anything need to be done spcifically for ECC 6.0
Regards,
Suresh.P

Hi,
Please do the following check,
Go to SPRO - MM - purchasing - messages - output control - message types - define message types for PO - Execute
under fine tuned control : PO - For the PO printout condition type , ensure that short description New and Change both are maintained.

Emailed Purchase Orders not appearing in SCOT

Hi,
I am trying to view the emailed output of Purchase Orders (via Shopping Cart approvals) to vendors , in our test system. Because it is out test system, and we do not want purchase orders sent to vendors from this system, we have turned the SMTP (Internet) and TOPCAL (Telefax) off.
I can not see any purchase order output in SCOT, but I can see Shopping Cart approvals, Shopping Cart completions etc... Does having the nodes switched off only affect PO output, or is something wrong?
We do have programs RSCONN01, RSWUWFMLEC running
John

I think you need to enable the SMTP node.
Just make sure nobody is allowed to start the sender job and make sure there is no automatic send job scheduled.
Even if you enable the SMTP node and just clear the entry for your SMTP server in the node's settings you should still be able to "see" the mails waiting to be sent.
Regards

Goods receipt for purchase order not allowed for a particular wbs

hello everybody..
Am creating a good receipt for a purchase order using the T-CODE-: MIGO...
While doing so am getting an error as " goods receipt for purchase order not allowed(wbs element)".
What can be done to rectify this error?
Plz do help me....
Regards,
Deepika
Moderator message: not directly related to ABAP development, please have a look in the appropriate functional forum, study the long text of this error message.
Edited by: Thomas Zloch on Dec 1, 2010 5:52 PM

Hi Br. Ajay M,
Released the order and Status line as follow
REL AVAC BUDG GMPS
but the error changed while reverse the document
item 0001 Order is invalid.
Many thanks for your kindly reply.
regards,
Steven

Purchase Order not subject to release strategy for contract rel. strategy

Hello, I am trying to set release strategy for contracts (TCODE: ME31K). I have created characteristic, which use table CEKKO and field name BSTYP in Addnl data tab. I have checked values, and they are correct. Then I have assigned in release strategies in classification view value contract. But when I try to check release strategy in ME31K with green flag, it display error: Purchase Order not subject to release strategy. (I have tried to do the same strategy in purchase order, of course with value Purchase order, and it works nice).
So I have checked this release strategy with this codes:
CL24N ok,
CT04 ok,
CL30N ok,
CL20N ok,
Release simulation in release strategy works,
Then I found out that I should check SE38, SE37 but I do not understand how to use them (according: Purchasing Document Not Subject to Release Strategy).
Thank you for your help in advance.

I haven't said to use EKPO table in characteristics. You have to use CEKKO - BSTYP in characteristics.
I've just said the compare the value which you have given in Release strategy - Classification and EKPO table for the particular contract.
Also compare your release strategy settings with many existing documents in SCN.
Check your Classification should be like that.
You may see the error message in ME31K. Just save the contract then go to ME32K/ME33K or ME35K you can see the release strategy will effect for the contract.

Purchase order not create in sus

Dear customizer,
Ihave implemented a plan driven procurement with sus (r/3-sus) scenario,we have a problem when we transfer idoc from r/3 to sus.In sus sistem give me this error message
"An error occured within an XI interface: Exception occurredE:BBP_PD:BBP_PD:051 -No address found for partner function type Sold-to Party E:BS:002 -"Create" is not allowed (SUS Purchase Order 4500000006 )CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>"
I hope in your answer.Thank best regards.
Pernasetti Alessio

Hi,
Please check the following things.
Check whether the roles delivered by SAP meet your requirements. If not, you can create new roles and assign transactions to them. We recommend that you copy standard roles and tailor them to your requirements.
All users assigned to a respective role are then allowed to carry out the transactions. If required, you can refine the authorization check on the tab page Authorizations.
Standard SAP Single-roles
SAP_EC_SUS_ADMIN_PURCHASER (for purchasing administrators - SAP Supplier Self-Services)
SAP_EC_SUS_BIDDER (for bidders - SAP Supplier Self-Services)
SAP_EC_SUS_DISPATCHER (for dispatchers - SAP Supplier Self-Services)
SAP_EC_SUS_INVOICER (for invoicers - SAP Supplier Self-Services)
SAP_EC_SUS_ORDER_PROCESSOR (for order processors - SAP Supplier Self-Services)
SAP_EC_SUS_MANAGER (for managers - SAP Supplier Self-Services)
SAP_EC_SUS_SERVICE_AGENT (for service agents - SAP Supplier Self-Services)
If you want to use SAP Supplier Self-Services, proceed as follows:
1. Select one of the following single roles:
SAP_EC_SUS_ADMIN_PURCHASER
SAP_EC_SUS_ADMIN_VENDOR
SAP_EC_SUS_BIDDER
SAP_EC_SUS_DISPATCHER
SAP_EC_SUS_INVOICER
SAP_EC_SUS_MANAGER
SAP_EC_SUS_ORDER_PROCESSOR
SAP_EC_SUS_PRODUCT_MANAGER
SAP_EC_SUS_SAR_PROCESSOR
SAP_EC_SUS_SERVICE_AGENT
SAP_EC_SUS_SERVICE_MANAGER
2. Choose Change Roles.
3. Choose the Personalization tab page.
Note: The personalization applies to all roles, meaning the user can also create his own roles, for example copying the delivered SAP SUS roles. He can tailor these roles to his requirements by changing the SUS-specific attributes (BBP_SUS_ROLE_ATTRIBUTES).
1. Select the entry BBP_SUS_ROLE_ATTRIBUTES (SUS-specific role attributes).
2. Choose Change values.
A dialog box for maintaining SUS-specific roles appears.
3. If required, perform the following steps:
If the role should be displayed in the SUS User Management (UM) and should be able to be assigned to the relevant user by the supplier administrator, set the indicator to display the role in SUS UM.
If the user should be displayed as a service agent for the purchaser, set the Service agent indicator.
If you want to define the user as an SRM administrator, set the SRM administrator indicator. The user is then authorized to change all supplier data.
If want to assign the role SUS administrator automatically to the user during registration, set the SUS administratorindicator.
Sets the relevant indicators if you want users to receive the following notifications: Notification If Purchase Order Not Opened, Notification If Purchase Order Response Is Missing, Notification If ASN Is Missing, Notification If ConfirmationIs Missing, Notification If Invoice Is Missing,
Award the points for the help.
BR,
Vijay Mittal

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

Change Purchase Orders not to be send to external catalog vendors via XI

We are working on SRM 5.00
When ever we create Purchase Orders from External Catalog a mail goes to the vendor via XI in XML language.
That is fine. However when we change any thing on the Purchase Order a again mail goes to vendor.
Our requirement is to send the Purchase Order only when they are created and not when they are changed.
How do we manage this in SRM.
Will badi ZBP_SAPXML1_OUT_BADI help us
thanks

Hi,
See these related notes:
Note 881650 - Duplicate transfer/output of the purchase order
Note 1015245 - Changing PO fields which are set as E generates new output
Note 659386 - PO output in case of customer field changes
BR,
Disha.
Do reward points for useful answers.

Purchased apps not appearing

I have an iPad that has several purchased apps (specifically angry birds). I got an iPhone and angry birds is not available for transfer. What can I do?

There seems to be two problems with purchased apps not appearing. Both separate. For me, all I see is spinning circle until finally the app crashes. Everything else on the store works except the purchased app page. None of the posted solutions work for this type.
Others seem to be able to fix their problems with either signing out of the store and singing back in while, for some, just a hard reboot works.
Must be a bug somewhere that Only Apple can fix.

Purchases do not appear on purchased list or music, even though it says they should be there

What do you do when you purchased from ITunes Store and it says that you purchased it, you checked for available downloads, says none available, but the purchase does not appear in Music or Purchases?

Did you load the Materials into the material Library?
Select a Material
Click on the Thumbnail to enable the flyout
Then click on the little triangle on that flyout (I know we will fix this )
You should see a Load Materials and below that a list of Materials (screen hot)
You can also mnaual add them to the Preset folder > Materials (screen shot)

Purchased Apps not appearing in purchased section!

My iPad was recently wiped out. As a result, I need to reload all of my apps from the app store. When accessing the 'Purchased' section on the app store, my purchased apps do not appear. The screen is blank. If you randomly click on the screen, the individual app wll appear on a new screen. However, I have a large quantity of apps to download, and I will not be able to do that for every app. Help!

There seems to be two problems with purchased apps not appearing. Both separate. For me, all I see is spinning circle until finally the app crashes. Everything else on the store works except the purchased app page. None of the posted solutions work for this type.
Others seem to be able to fix their problems with either signing out of the store and singing back in while, for some, just a hard reboot works.
Must be a bug somewhere that Only Apple can fix.

Purchased apps not appearing in history

Hi everyone,
I am writing you concerning a problem I have encountered with several apps on the appstore that, despite being bought, persistently refuse to appear on my list of purchased items. I have tried downloading them with different devices, even those that belonged to friends of mine, and the problem remained. It was impossible to find the apps in the purchase history.
The apps in question are the following:
- Phantom seeds
- Juniper's Knot
- The Raven by Edgar Allan Poe
- Ghost Trick : phantom detective
- Ace Attorney : Phoenix Wright Trilogy HD
- Pictures at an Exhibition -Free Adventure Gamebook
- London Detective Story - English Version
The common element amongst all the above apps is that they are free (some of them do have IAPs however). My problem is that if the apps are ever removed from the app store, I will have lost access to the content I have purchased.
Please feel free to try to download these apps on your idevices and you will see that they do not appear in the purchase history.
Do you know how this issue can be fixes? The developers have declined responsibility and referred me back to Apple's customer service.
Thanks in advance for any advice.
Best,
P

There seems to be two problems with purchased apps not appearing. Both separate. For me, all I see is spinning circle until finally the app crashes. Everything else on the store works except the purchased app page. None of the posted solutions work for this type.
Others seem to be able to fix their problems with either signing out of the store and singing back in while, for some, just a hard reboot works.
Must be a bug somewhere that Only Apple can fix.

Purchase order not appearing as commitment for next fiscal year in KOB2

Similar Messages

Maybe you are looking for