Purchase Order not getting saved
while creating Purchase Order iam getting the PO number while trying to change in ME22N system is throwing the error MSG *"Express document "Update was terminated" received from author "mm_SAP"*
clicking on the inbox iam getting
Transaction.. ME21N
Error Info... System error: error during insert in table EINA
(ME_CREATE_DOCUMENT)
Message class ME
Message no 807
Edited by: Praveensap23 on Feb 22, 2011 10:11 AM
Hi There
Get the help from ABAPer, he may help you to fix the issue.
Thanks
Senthil
Similar Messages
-
SAP Fiori Purchase Order not getting any data & getting a 404 Error Message
Hi
I have downloaded Purchase Order SAPUI5 code from SAP Fiori server. import it into Eclipse then try to run that Apps/code(SAPUI5) from browser.
1) Not getting any Data.
2) It show 404 Error Message.
3) Its show wrong User Name as LoginHi Pankaj,
First question :
Are you able to get the data in Fiori ?
Secondly,
You have mentioned as Purchase order, but here you have given snapshot of Purchase requisition app, and you are calling also purchase req app from the browser. Please clarify
If you have mistakenly written PO : If you are still not getting data for Approve Purc req, then check if your RFC connections are proper from Gateway to backend and backend to Gateway.
If RFC is working fine, check the Remote logon, it should be marked as Current user. If its not marked as current user, then it will show some other user.
Regards,
Tejas -
Order not getting saved with RFC user
Hi CRM experts,
We have custom report to update payment card details in CRM order. For an error order when I try to update the card details in CRM it successfully deactivates the "Contains Error(I1030)" status and saves the order.
Whereas the same error order when I try to update the card details through external system, the user is RFC user, the program does not deactivates the status I1030 and the order gets saved with error.
Initially I thought it is an authorization issue with RFC user, so I tried applying SAP_ALL access to RFC user but it did not work.
Kindly suggest the possible solution.
Thanks in advance
Meenu.Hi Meenu,
The standard one order framework works in such a way that when any changes to any object like PARTNER , HEADER , ITEMS , CARDS etc take place, then after changes done, the system checks for any inconsistency for that particular object and displays error messages accordingly.
At the next change, the check runs again and the messages are removed. The checks are run through the standard event framework of BEFORE and AFTER. So in case the error messages are not getting removed, it means that these events are not getting triggered properly. I think that you are using individual FM for changing the details which could be something like CRM*CARD*MAINTAIN*OW*, you can try using CRM_ORDER_MAINTAIN, as this FM triggers all events correctly.
/Hasan -
Purchase order not getting printed
Dear Experts,
Hello,
I am facing a new problem.. I have 340 line items in my purchase order. But when i click on print preview...it takes a lot of time to generate and ends with an error saying "sap has run out of memory".. is it because of the length of the line items or is it a new problem.. kindly help.. If the former is a problem, then what is the maximum no of line items that can be entered.
Regards
ShyamHi Shyam.......
You have to do some modifications in Repeatative area so that No. of rows per page shuld not be more than certain no. say maximum seven lines in one page.....
please try this......
Regards,
Rahul -
Sales order should not get saved without entering the material
Sales order is getting saved without entering the material. How to make material entry mandatory in sales order.. so that if i try to save the sales order without entering the material the system should create an error.
Please give a clue, if there is any way other than incompletion log.Dear DV,
T. Code: SHD0
Create a Screen Variant for Transaction VA01
and maintain Field: Material as "Mandatory".
Best Reagrds,
Amit
Note: Following is the explaination with Incompletion-Procedure -
T. Code: OVA2 - Incompletion Log
Select Group: B - Sales Order Item; and Double Click "Procedures" (left-hand Dialog-Structure)
Select InCompletion Procedure: 20 - Standard; and double click "Fields" (left-hand Dialog-Structure)
Here, Maintain entry:
Table: VBAP
Field: MATNR
Screen: PKAU
Status: 4
Imp.: Create Z-Incompletion Procedure and make necessary changes, instead of changing a Standard one.
Alternatively, check with Arijeet's post in following thread:
How to restrict saving of a sales order without a material. -
While Creation Of SaleOrder Char Values are not getting saved.(V C)
Hi SAP gurus,
One of my client can able to create a saleorder but when we go and see in VA03 Display mode,we found Charactrestic values getting miised out.What could be the probale reasons.
Note: I Have stimulate the required combination as per my client requirement in CU50,here i can able to indentify the Green Sign,but While Creation Of SaleOrder Char Values are not getting saved.
Awaiting for your valuable reply.
Cheers,
Kumar.SKumar ,
If you assign values in classification view or configuration profile they will become default for the product, and it willnot be changed in sales order.
another thing if the item category is incorrect you will not get the configuration pop up at all .
problem what i understand from your thred is at the time of sales ordeer creation there is some inconsistances in the configuration , may be some condition is not fullfilling.
If in CU50 the result shown are error free, same configuration should owrk properly in sales configuration process, please again try to create it in sales order with same value assignment also check all the messages.
see the result of configuration before saving the sales order , i hoep it will work for you.
I am assuming all the things from SD are properly configured ie item catageory, varient pricing etc.
Check and revert back.
Regards
Ritesh -
Added new fields in vendor master in xk01 but data is not getting saved
Hi experts,
To add new fields in vendor master i have followed the following steps :
1.) Appended a structure ZRTGS in LFA1 table with required fields and activated
2.) Added new button in xk01( vendor master ) using spro -> logistics-general -> business partner -> vendors ->
control ->adoption of customer's owaster data fields -> prepare modification free-enhancement of vendor master record
Created a screen group ZR and defined label tab pages with function code ZRTGS and saved entries
3.) Created a implementation for BADIs VENDOR_ADD_DATA and VENDOR_ADD_DATA_CS.
4.) Created a program with my own subscreen for the required fields
The button is getting displayed in XK01, XK02 and XK03 respectively. Whenever the button is clicked the subscreen with
the fields is also displayed. But whenever i try to save the data in either XK01 or XK02 it is not getting saved in to the
database table LFA1.
Request your help in this regard.
Thanks in Advance.Hi,
You may need to check this include .
EXIT_SAPMM06E_008 -->Import Data from Customer Subscreen for Purchasing Document
Thanks,
vamshi -
Goods receipt for purchase order not allowed for a particular wbs
hello everybody..
Am creating a good receipt for a purchase order using the T-CODE-: MIGO...
While doing so am getting an error as " goods receipt for purchase order not allowed(wbs element)".
What can be done to rectify this error?
Plz do help me....
Regards,
Deepika
Moderator message: not directly related to ABAP development, please have a look in the appropriate functional forum, study the long text of this error message.
Edited by: Thomas Zloch on Dec 1, 2010 5:52 PMHi Br. Ajay M,
Released the order and Status line as follow
REL AVAC BUDG GMPS
but the error changed while reverse the document
item 0001 Order is invalid.
Many thanks for your kindly reply.
regards,
Steven -
MessageRadioButton Value is not getting saved
Hi All,
I am facing an issue with Radio Button data.
When the page loads all the "No" buttons will be selected by default.When I select "Yes" radio buttton and click on "Save", all the radio buttons will get reset to "No" and same value will get passed further. Value of "Yes" button will not get saved.
Please help me in resolving this issue.
Thanks,
AkshataGive it a shot by trying this. Hope this helps you.
OAMessageRadioButtonBean personButton =(OAMessageRadioButtonBean)webBean.findChildRecursive("Person");
personButton.setName("partyTypeGroup");
personButton.setValue("PERSON");
personButton.setSelected(true);
OAMessageRadioButtonBean orgButton = (OAMessageRadioButtonBean)webBean.findChildRecursive("Org");
orgButton.setName("partyTypeGroup");
orgButton.setValue("ORGANIZATION");
To retrieve the value of the Radio button, which is selected use the below
System.out.println("Radio Button Value : "+ pageContext.getParameter("partyTypeGroup"));
Also, if on click of button, you should once again set the radio button by calling setSelected() to retain the same look n feel, else, the selection wud jump to the other radio button.
Basically, developer guide says, that you cannot assign the group name or checked/unchecked value to the Radio button declaratively). For more information read
Radio Group / Buttons in Developer guide.
Thanks
Saurabh
Edited by: SaurabhAg on Mar 22, 2012 12:58 AM -
Output type not getting saved in the PO
Hello Team
we are facing one issue where output type is not getting saved in the PO.
we give one output type and than save it , after going back to the PO we see that it is not there.and no output issued
the PO is released properly and there is no issue , any idea what could be the reason for itHi,
Check in SU3 t.code, did check box selected u201CDelete After Outputu201D in Spool Control segment in Default TAB
Also check Partner Function VN maintained in Default values TAB in NACR--- > EF Application for your output type
Cross check partners {VN, PI, GS) are assigned to your PO output type in Partner Roles per Message Type
Regards,
Biju K -
Open Purchase Orders not considered as requirement for MRP Run
Hi ,
We are facing a issue of Open Purchase orders not appeared in Stock requirements list and also it is not considered as requirement for MRP Run against reservation.
As aresult for a reservation demand of 10 units we are ending with Open POs 10 units and a additional planned order 10 units.
Material Type : ERSA
MRP Type : PD (or VB)
Lot size : EX ( HB if MRP Type is VB)
Could you please throw some light to correct our settings to MRP to consider Open POs?
SaravananCan you check to see if there is a re-order point set up for this materia? That could be causing the problem too.
-
Planned order not getting generated for FG
Dear Experts,
Planned orders not getting generated for the Finished Goods - X which is having MRP Type M0 - MPS fixing type strategy group 20 which is copied fron another FG - Y , its a new product and production plan has been updated through MC88 - Rough cut planning but the planned orders are not getting generated.
And for the material valid production version exists with selection method 3 and individullcollective as 1.
Please let me know what might be the possibalities and what all the key fields i need to check.
Thanks & Regards,
Sampath
Edited by: sampath s on Jul 13, 2011 11:31 AMDear,
In general MPS is run for High value items ( if you use like Gold , Platimum or A class items. ).
Always only single level is used for Explosion and planning. then only you can analyse the requirements at each stage before procurement.
Otherwise if you run MPS to multi level, Bottom most high value will be procured without any notice to authorities. Even you may cancel the process in mid way. At that time what will happen to the procured high value material.
So for that purpose only single item single level MPS concept is evolved.
Fo that you run MPS at single level so that only for the first level MPS will be carried out.
Check and revert back.\
Regards,
Alok Tiwari -
File not getting Saved on Application Server
Hello All,
We created a file in "Automatic Payment Transactions (F110 Transaction)" and are able to save the text file on Local drive. But for our e-banking requirement we need to store this file on our application server. The configuration settings in OBPM4 are already done and now system is picking the default application server path while saving file in "Payment Medium - > DME Administration" transaction. The problem is - although the system is picking the required path of application server but file is not getting saved. The error coming is: File <path> could not be opened (Message Number: FZ231).
We have checked for 777 authorisations (OS authorisations) for the folder.
Please suggest that what can be done to resolve th issue.
Regards,What exactly we need to check in Payment program? We are not able to save the file on application server. There is no problem while saving the same in local drive.
Regards, -
Inbound Idoc - Date fields not getting saved
Hello,
I have created inbound idoc scenario in SAP. I receive Idoc from non SAP system to SAP system.
then data from IDoc is saved into different tables, for that I have written one function module (attached to process code)
One of the segments in IDoc type has date as a field. It is of type sy-datum.
When I receive Idoc in SAP only date fields are not getting saved in tables.
Is anything specific need to be done for date fields? please advice.check which format you are getting into sap and make sure you are coverting in into required format.
-
Purchase Order not subject to release strategy for contract rel. strategy
Hello, I am trying to set release strategy for contracts (TCODE: ME31K). I have created characteristic, which use table CEKKO and field name BSTYP in Addnl data tab. I have checked values, and they are correct. Then I have assigned in release strategies in classification view value contract. But when I try to check release strategy in ME31K with green flag, it display error: Purchase Order not subject to release strategy. (I have tried to do the same strategy in purchase order, of course with value Purchase order, and it works nice).
So I have checked this release strategy with this codes:
CL24N ok,
CT04 ok,
CL30N ok,
CL20N ok,
Release simulation in release strategy works,
Then I found out that I should check SE38, SE37 but I do not understand how to use them (according: Purchasing Document Not Subject to Release Strategy).
Thank you for your help in advance.I haven't said to use EKPO table in characteristics. You have to use CEKKO - BSTYP in characteristics.
I've just said the compare the value which you have given in Release strategy - Classification and EKPO table for the particular contract.
Also compare your release strategy settings with many existing documents in SCN.
Check your Classification should be like that.
You may see the error message in ME31K. Just save the contract then go to ME32K/ME33K or ME35K you can see the release strategy will effect for the contract.
Maybe you are looking for
-
Date data from Web Intelligence Report not equal to Date from Source
Hi, I am creating a Web intelligence report based on a BEx query. I have a field called 'Date' that I am bringing over from the BEx query. It has a format of MM/DD/YYYY. When I view the 'Date' in Web Intelligence, it is displaying as 1/1/70. For exam
-
My phone says there's 0 bytes available but only 6 GB are used the phone is supposed to be 8 GB I have no pictures at all and only 5 apps this is really bothering me please help I can't even take pictures because it says I've no storage I also have n
-
How do I connect to wi-fi previous network ?
I am having trouble re-connecting to my network. How do I regain access to my secure network which was available only a few hours ago? It seems to have disappeared on us.
-
Differences between Monitor and Decrypt actions in Decryption Policies
Hi Everybody, Currently I'm working in my first WSA (S170) implementation and some questions has popped up while I was configuring the Decryption policies. The main question here is: What are the differences between "monitor" and "decrypt" in the URL
-
Converting magazine pdf to online pdf magazine viewer
I tried to search to look for this info but the search feature has been throwing errors for me the last couple of days. What I'm trying to do is see if CF has features or functions that would allow me to use the pdf files used for print production of