Purchase order Output Determination

i need to configure a seperate outpur type for one of the document type in Purchase order,
eg ZRY
If i create PO with this Doc type i need a separate output type
For remaining Doc type there will be different doc types
Here my client are using some format same format i need to design for this ZRY Doc type
Pls guide me with the steps to configure the output type.....
how to design the same format and how to link the format with this Doc type...
Edited by: Csaba Szommer on May 8, 2011 4:53 PM

Hi Stefan,
The steps are as follows:
Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
*4. Message Determination Schemas*
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
Reward me if it helpful
ASHOK

Similar Messages

Purchase order output determination thru User exit

Hi,
We are trying to find a way to determine the output for PO while creation (me21n) or modification (me22n).
We do not want to maintain output condition records for each fax/print/email etc..cases.
Can we do below thru a user exit or any other method ?
While creating PO, an OA partner will be chosen, so instead of maintaining the output condition records,
- user exit can access to OA's vendor master record and read Standard Comm.Method in Address section.
- according to comm.method, the PO message should be determined..
i.e: if comm.method is Fax, then message should be sent to OA thru Fax.
can this be done thru an exit ?
Thanks and Regards,
Ocal

Hi Stefan,
The steps are as follows:
Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
*4. Message Determination Schemas*
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
Reward me if it helpful
ASHOK

Purchase order output

Hi
I have created a new purchase order output. When I go to messages in a Purchase order, I do not see any output. The output/message screen is blank.
When I go to Determin. Analysis, I see the Output has been found. See picture below.
http://i35.tinypic.com/169kwwn.jpg
Sincerely,
Ketan

Hi Ketan,
Go to MN04 and select the condition type NEU if you are using the standard condition type or select the customized condition type and select the appropriate combination to maintain the output master record.
if you want to check whether you Purchase Order output has been assigned to your output or not
a) execute t-code NACE
b) Select EF -Purchase order
c) click on output types
d) here select NEU if u are using NEU or select the condition type which you have customized
e) click on the processing routines to see if the PDF/smartform is attached to the print out and fax.
hope this helps

Different interfaces for purchase order output from MM system

Dear Guru's,
We are configuring the business scenarios of service procurement classic and Plan driven procurement with supplier enablement in the MM-SUS environment for our SRM7.01/ECC6 ehp 5 combination.
These two scenarios are using different interfaces for purchase order output.
The service procurement classic is using the proxy interface PurchaseOrderERPRequest_
Out_V1 for purchase order output from ERP.
However, the plan driven procurement uses the interface ORDERS.ORDERS02 for idoc message for purchase order output from ERP.
Why are there two different interfaces for the same document output in two different business scenario? How the system will determine which interface needs to be used in the runtime for the purchase order output?
Any thoughts will be highly appreciated.
Thanks and regards,
Ranjan

Hi Ranjan,
Please add the value 'CL' in the table SWF_CATIDS
Then it will work.
With Regards,
Malay

How to define a purchase order output print view as my element

Dear all :
I have created a purchase order and want to print,but i found the details of print doc is not my requirements.So,I want to change it .I don't know where the path is .THKS
Brian

Hello Jianfeng,
The purchase order layout can be changed using the SAP script/Form. You need to identify what you need to put on the purchase order output also you can include the client's logo and other standard and constant details (tax number / registration number etc).
You have to give this requirement to the technical person (ABAPer). (S)he will make the changes in the script program and you need to assign this form to the PO printing program.
In standard SAP version, Form MENDRUK is available for Purchase order printing.
Once form is developed by the developer, you need to assign this form in customization,
SPRO--> Mat Managmenet --> Purchasing --> Messages --> Forms Layouts for messages --> Assign form and output program for purchase order.
Hope this helps.
Regards
Arif Mansuri
Reward the points if answer is helpful.

Purchase Order output to be blocked in ECC when the PO is technically Incom

Hi All,
First of all I would like to say that, I have searched the entire forum for this issue & as i could not find any thread relating to this, I am posting.
We have implemented SAP GTS & whenever a purchase order is created in ECC system and due to Business partner missing or Legal Unit missing in GTS, the document is created as Technically incomplete in GTS. Inspite of technically incomplete, the ECC users are able to print out the PO. We have implemented a SAP note for blocking the purchase order output when the customs Import document is Blocked in SAP GTS.
Could anyone let me know if we have any OSS note for blocking Technically incomplete purchase order's or is there any workaround to prevent the output from being printed.
Regards
Aravind G

Hi,
We have a requirement to block PO output as well so we implemented Note 900555. But how does it work? We do not see anything anywhere on the PO that would prevent output. We have POs that are blocked in GTS and nothing is any different on the PO. The note doesn't really explain how it works either. We assumed that the Output logs would also show a message of some sort.
In addition, when this note references blocking "output" is it only meant for blocking print? Or can it block electronic transmission as well?
If we can't get this note to work, we are thinking of adding GTS to the PO Release Strategy, in order to block transmission of anything to the supplier.
Thanks,
Jessica

How to view the purchase order output

Hi all,
how to view the purchase order output in the transaction me23n?
How to obtain the purchase order output form?
Please help..

HI,
goto NACE tcode then select the purchase order type and go to output types u cna use standard one NEU and provide the sapcript name and form name default will be there with MEDRUCK and print program.
then in ME23n click on messages there create ur message type NEU and save it
then print the purchase order...
hope u get solved with this
Regards
Syed A

Number of messages for Purchase Order output

Hi All!
I have to set the number of messages for the Purchase Order output at 2 (NAST-ANZAL). For a certain output type, in the Communication method the default value for Number of messages (original + copies) has to be 2. There is a transaction which allows me to do that but I don't remember it.
Yours answers and your time are appreciate.
Best regards.
Florina C.

Hi
The transaction is MN05 or
Logistics->Materials Management->Purchasing->Master Data->Messages->Purchase Order
Max

Sales Order Output - determined by Sales Order Type, Created By

I want have my order output determined by sales order type
(vbak-auart) and created by (vbak-ernam).
I have created a condition table 501, access seqeunce Z001.
In v/48, in accesses for Z001, I created
AcNo: 10
Tab: 501
Requirement: [empty]
Exclusive: unchecked
in fields, I can't find ERNAM in structure KOMKBV1(header), but I find one in KOMPBV1 (item).So I have assigned it to ERNAM.
besides, I have created the corresponding records in VV11
I expect to have:
Output Z001 will be created for sales order type OR if created by user XXX
However, no output is generated. When I go out detemination analysis, I found that in the output determination procedure, it did go into output type Z001, but, since no value is found for "created by", i got message "Access not made (initialized field").
I suspect that no value stored in KOMPBV1-ERNAM. Do you know how I can get it done?
Points will be awarded for useful information. Thanks in advance.

Hi
You have to include this field as a Zfield in the structures KOMKBV1, KOMPBV1 and KOMB.
You have to include the field as Zfield in these structures.
Once this is done, you should also be able to update this field in the structures.(As on now, you have only created a field, but you have not mentioned how the field has to be updated.
In order to update the logic, you have to do a small code in one of the user exits for outputs.
In the user exit, you have to write a code like this
MOVE VBAK-ERNAM = KOMKBV1-ZERNAM(this is the zfield you have created)
Now create the condition table and do the rest.
Your output should work fine. The user exit I was saying is the subroutine USEREXIT_KOMKBV3_FILL in the include RV61B902 in the user exit RVCOMFZZ. If you can give this info to the technical guy, he should be able to find out the same for saels order output also.
The user exit RVCOMFZZ also has the subroutine USEREXIT_KOMKBV1_FILL which you can verywell use for your requirement. This will solve your problem
Hope this helps.
If you have any problems in this, you can again put the problems in this thread. I will try to solve.
Reward if this helps you

Purchase order price determination

Hi Gurus.
Please help on below Inquiries
In Purchase order, how is the net price determined?
Is it from the agreement? the info record? RFQ? Is there a sequence for this?
If there is, where is this configured?
Thanks!

Hi,
Purchase order price determination takes place with help of Access Sequences and Schema Group of Vendor.
You can go for pricing manually or automatic. If you need pricing automatic you have to go for use of Access Sequences and Schema Group of Vendor. You can customize your pricing procedure according to your requirement such as like Domestic, Import and Stock transport.
For the above individually you have to configure Pricing Procedure and the following steps are:
SPRO->MM->Purchasing->Conditions->Define Price determination process
1. Define Condition Table:
2.Define Access Sequence,
3.Define Condition Type,
4.Define Calculating Schema,
5.Assign Calculation Schema, Access Sequence and Condition Type,
6.Define Schema Group Of Vendor,
7. Define Schema Group Of Purchasing Organization,
8.Assign Schema Group Of Vendor to Purchasing Organization,
9.Assignment of Schema Group Of Vendor ,Schema Group Purchasing Organization and Calculation Schema.
10. Assign Vendor to Schema Group of Vendor (XK02)
11.Maintain Condition record (MEK1)
after above steps, you can go for create PO in ME21N.
In the case of Import PO, you have to activate Import PO.
SPRO->Materials Management -> Purchasing -> Foreign Trade/Customs ->Control Foreign Trade Data in MM and SD Documents ->>>>>>
Regards,
Biju K

Purchase Order Output Failing

When a user creates a purchase order, the output (usually set to print and fax) is failing. On the Message window, the output method has a status of "incorrectly processed" and upon attempting to display a print preview of the document an error message is received that "Archive object has not been assigned."
Manually outputting the purchase order thru ME9F works fine. However, the users needs this to be automatically done as it was before the error started occurring.
He is the only user experiencing this. What are possible connections between output determination and user or purchasing group? And how can I go about solving this?
Thanks - points will be rewarded.

I am not sure what the O/p determination criteria is for PO output. However it seems like the User/ Pgroup is used in condition determination which has either been changed or deleted.
Could you verify through MN05 if the condition tables are intact

User exit -BADI for overriding Partner number in Purchase order output type

Hello All,
We have a requirement wherein the EDI message type will distribute the Idoc to the partner number determined in the output type of the purchase order. We are maintaining the condition record for a generic partner number in MN04 and we want this partner number with partner role SH from the condition record to be modified to the sales order sold to party partner number. We are using third party processing and hence sales order number can be fetched from account assignment (EKKN) table of the purchase order. Kindly do let me know the user exit /BADI that can be used for achieving this functionality.
Thanks in advance for your immediate response.
With regards,
Joseph Anand B

Hi,
check with below link,
fo this one you will find both user exit and badis
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/find%252bapplication%252bclass%252bwith%252bexits%252band%252bbadis%252bfor%252ba%252btransaction
Regards,
Madhu

Purchase order output type NEU is not get assigned automatically

Dear All,
when i am creting purchase order the output type NEU is not get assigned automatically.
I have maintained message condn record for NEU and for specific PO doc type NB.
same problame i was facing for the inventory docuemnts but i was resolved by running one SAP std program so please guide me if any such program is available for Purchasing documents also or any other setting i am missing to make.
Pl suggest
Regards,
Vimlesh

Hi
Please check the following in customization.Dont check in NACE you may miss something like fine tune control
1) Check the Message determination procedure is having the NEU output type
2) Check the std Message determination procedure is assigned to PO
3) Check the output type for the Access sequence, default data for transmission medium and partner function VN, Language & Form assigned to it
4) Check the Access sequence for the condition tables
5) Check the condition record in MN04/MN05
6) Check the purchasing group has printer assignement
7) Check the fine tuen control for operation 1 & 2 for message type.
Hope your problem now solved.
Thanks /karthik
Edited by: Karthik on Aug 13, 2009 5:29 PM

Hello, How to deactivate automatic Purchase Order Output det,

Hello,
will anyone guide me the steps to deactivate automatic output determination in a Purchase Order.
Full points for the answer.

Hi Pv,
see the below links
help.sap.com/printdocu/core/print46b/en/data/en/pdf/CAGTFADM-MM.pdf
http://help.sap.com/saphelp_srm30/helpdata/en/91/41faf2c220e84c9002a4ae4cc1906a/content.htm
http://help.sap.com/saphelp_srm30/helpdata/en/91/41faf2c220e84c9002a4ae4cc1906a/frameset.htm
http://e-mory.blogspot.com/2008/03/sap-edi-inter-company-billing-automatic.html
http://www.erpgenie.com/sapfunc/purchasing.htm
thanks
sagar
reward me if usefull.

Purchase order output message disappear at approval

Gurus,
Anyone encountered the problem of output type disappearing when purchase orders approval is carried out ?
PO does not appear anymore in ME9F and vendors are calling as they haven t received the order. No problem when PO amount is below fisrt approval range or until PO is getting approved.
Thanks for your help
Olivier

A specific field "Plant on header level 2" was added to structure KOMKBEA and the field for this value is lost on PO change mode.
The problem is not linked to any SAP standard related issue. Am therefore closing this thread.

Purchase order Output Determination

Similar Messages

Maybe you are looking for