Purchase Order using ME25
HI,
I am tring to create a PO using ME25. I am getting the error "Item blocked for order processing (function not possible)" and Procedure says " The item must first be released before you can issue a purchase order". I have already release my contract.
Please let me know how to proceed with it, do I need to create requisition from ME25.
Thanks in Advance.
John K.
Edited by: John Thomas on Oct 20, 2010 7:58 PM
John
Check your contract data. Either the contract is not released or item is blocked there.
Regards
Virender Singh
Similar Messages
-
Create a Purchase order using the BAPI using the data in the XML file.
Hello Gurus,
here is the scenario can anyone help me how to proceed explaining the procedure?
Create a Purchase order using the BAPI using the data in the XML file.
comprehensive explanations are appreciated.
thanks in advance.hi,
first use fm "bapi_po_create".
then use fm "BAPI_ACC_GL_POSTING_POST"
The demo environment was made with real business scenario in mind, but following subjects need to be addressed in a live implementation:
No exceptions and error handling is implemented, except the order rejection (e.g. partly delivery);
In Navision both XML Ports and the XML DOM has been used to integrate with SAP XI, because XML ports has some drawbacks regarding to Namespaces in XML Documents (mandatory in SAP XI);
A minimum of SAP and Navision customization is required to implement this solution. (e.g. user exit in SAP, Navision XML DOM). -
Error release purchase order using transaction code me29n
i have warning error this purchasing document number cannot be released.
while i enter me29n t code.why?
then how to release purchase order using me29n t code?
can anyone answer this two questions.hi
i have warning error this purchasing document number cannot be released. while i enter me29n t code.why?
is the release strategy is triggred for the po ?? check thisin P order in me23n ,in header level check release strategy tab ,
then how to release purchase order using me29n t code? can anyone answer this two questions.
just go to me29n >release strategy tab here just click on the release button in front of the release code -
Creating a Purchase Order using ORDERS05 Idoc
Hi Experts,
I need to create a purchase order using ORDERS05 Idoc, with the data I am using a sales order is gettig created but I need to create a PO insted of SO.
Please let me know what is difference between a PO and SO while using ORDERS05. Also please let me know what are all the fields that needs to chaged in the Idoc.
Thanks,
SumaHi,
I'm looking at a similar problem, can we use ORDERS05 IDOC basic type to create a Purchase Order?
What is the inbound processing FM? I tried IDOC_INPUT_ORDRSP, but it seem to only allow changes to a PO, and not creation of a PO.
For IDOC_INPUT_ORDERS FM this one seem to only create Sales Orders?
Which inbound FM should i be using?
Regards. -
Creation of purchase order using bapi
hi gurus,
Can anyone give me an example of how to create purchase order using bapiHi use BAPI_PO_CREATE.. I have an eg. of changing a PO using BAPI. This is almost similar to create.. Go thru and let me know if u need more info..
Dont forget to use 'BAPI COMMIT' after the function call...
DATA:
*Update Short text, qty, net price, item no.,
*agreement no. and agreement line no.
it_po_item TYPE TABLE OF bapimepoitem,
*Select fields
it_po_item_x TYPE TABLE OF bapimepoitemx,
*Delivery date
it_po_schedule TYPE TABLE OF bapimeposchedule,
*Select fields
it_po_schedule_x TYPE TABLE OF bapimeposchedulx,
*Return parameters
it_return TYPE TABLE OF bapiret2,
*PO Account
it_po_account TYPE TABLE OF bapimepoaccount,
*Select fields
it_po_account_x TYPE TABLE OF bapimepoaccountx,
Condition Types
it_po_cond TYPE TABLE OF bapimepocond,
*Select fields
it_po_cond_x TYPE TABLE OF bapimepocondx,
it_po_text type table of BAPIMEPOTEXT.
Structures
DATA:
st_po_header TYPE bapimepoheader,
st_po_header_x TYPE bapimepoheaderx,
st_po_item LIKE LINE OF it_po_item,
st_po_item_x LIKE LINE OF it_po_item_x,
st_po_schedule LIKE LINE OF it_po_schedule,
st_po_schedule_x LIKE LINE OF it_po_schedule_x,
st_return TYPE bapiret2,
st_po_account LIKE LINE OF it_po_account,
st_po_account_x LIKE LINE OF it_po_account_x,
st_po_cond LIKE LINE OF it_po_cond,
st_po_cond_x LIKE LINE OF it_po_cond_x,
st_po_text like line of it_po_text.
Variables
DATA : po_number TYPE bapimepoheader-po_number,
w_item_no(10) TYPE n VALUE '1'.
START-OF-SELECTION.
test values
po_number = '94490'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = po_number
IMPORTING
OUTPUT = po_number
st_po_item-po_item = w_item_no.
st_po_item-quantity = '00.000'.
st_po_item-delete_ind = 'X'.
st_po_item-short_text = 'ZMU-test1'.
st_po_item-agreement = '0060000128'.
st_po_item-agmt_item = '1'.
st_po_item-net_price = '1'.
st_po_item_x-po_item = w_item_no.
st_po_item_x-po_itemx = 'X'.
st_po_item_x-delete_ind = 'X'.
st_po_item_x-quantity = 'X'.
st_po_item_x-short_text = 'X'.
st_po_item_x-agreement = 'X'.
st_po_item_x-agmt_item = 'X'.
st_po_item_x-net_price = 'X'.
st_po_schedule-po_item = w_item_no.
st_po_schedule-delivery_date = '9/19/2008'.
st_po_schedule-quantity = '1'.
st_po_schedule_x-po_item = w_item_no.
st_po_schedule_x-po_itemx = 'X'.
st_po_schedule_x-delivery_date = 'X'.
st_po_schedule_x-quantity = 'X'.
st_po_cond-itm_number = w_item_no.
st_po_cond-cond_type = 'PB00'.
st_po_cond-cond_value = '1.000'.
st_po_cond-currency = 'USD'.
st_po_cond-change_id = 'U'.
st_po_cond_x-itm_number = w_item_no.
st_po_cond_x-itm_numberx = 'X'.
st_po_cond_x-cond_type = 'X'.
st_po_cond_x-cond_value = 'X'.
st_po_cond_x-currency = 'X'.
st_po_cond_x-change_id = 'X'.
st_po_text-PO_NUMBER = po_number.
st_po_text-PO_ITEM = w_item_no.
st_po_text-TEXT_LINE = 'MU_TEST1 MU_TEST2'.
APPEND:
st_po_item_x TO it_po_item_x,
st_po_item TO it_po_item.
st_po_schedule_x TO it_po_schedule_x,
st_po_schedule TO it_po_schedule,
st_po_cond TO it_po_cond,
st_po_cond_x TO it_po_cond_x,
st_po_text to it_po_text.
st_po_text-PO_NUMBER = po_number.
st_po_text-PO_ITEM = w_item_no.
st_po_text-TEXT_LINE = 'MU_TEST2'.
st_po_text-TEXT_FORM = '03'.
append st_po_text to it_po_text.
PERFORM function_call.
LOOP AT it_return INTO st_return.
WRITE:/ st_return-message, 'Message type =', st_return-type,/.
ENDLOOP.
REFRESH:
it_return,
it_po_item,
it_po_item_x,
it_po_cond,
it_po_cond_x.
PERFORM update_price.
WRITE:/ 'After update - Messages'.
LOOP AT it_return INTO st_return.
WRITE:/ st_return-message, 'Message type =', st_return-type,/.
ENDLOOP.
data: begin of test occurs 0,
f1,
end of test.
FORM function_call *
FORM function_call.
CALL FUNCTION 'BAPI_PO_CHANGE'
EXPORTING
purchaseorder = po_number
POHEADER =
POHEADERX =
POADDRVENDOR =
TESTRUN =
MEMORY_UNCOMPLETE =
MEMORY_COMPLETE =
IMPORTING
EXPHEADER =
TABLES
return = it_return
poitem = it_po_item
poitemx = it_po_item_x
POADDRDELIVERY =
poschedule = it_po_schedule
poschedulex = it_po_schedule_x
poaccount =
POACCOUNTPROFITSEGMENT =
poaccountx =
POCONDHEADER =
POCONDHEADERX =
pocond = it_po_cond
pocondx = it_po_cond_x
POLIMITS =
POCONTRACTLIMITS =
POSERVICES =
POSRVACCESSVALUES =
POSERVICESTEXT =
EXTENSIONIN =
EXTENSIONOUT =
POTEXTHEADER =
POTEXTITEM = it_po_text
POPARTNER =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'
IMPORTING
return = st_return.
ENDFORM. -
Problem in creating Purchase order Using BAPI
Dear ABAPers,
I am creating the Purchase order Using BAPI_PO_CREATE1. In that the Purchase order Line item i am giving the Net Price for the Material.But While creating the purchase order the system creates the puchase order with the net price which is already available in the memory.So how to solve this problem.
Thanks & Regards,
Ashok.Hi,
Try to pass the value NO_PRICE_FROM_PO in the BAPI and see
NO_PRICE_FROM_PO = 'X'
Regards
Bala Krishna -
How to create multiple Purchase Order using the same document number?
HI Friends,
I m in a product which extracts data from SAP and stored in Access database.
For that,while i extracting Purchase Order from the Demo Database (SBODemo_US)for OEC Computers,the same DocNum is used for several Purchase Order using Index Line numbers.
eg:
DocNum for Purchase Order1 -->3000 0 (Index)
DocNum for Purchase Order2 -->3000 1 (Index)
But i can't create multiple Purchase Order using same DocNum manually in SAP B1,Could anybody please help me <b>to create a Purchase Order using same DocumentNumber?</b>
Thanks in Advance
SooriyaKala.PHi,
The problem statement is not quite clear to me.
As far as I understand your statement, I think you want to club multiple orders into one purchase order using the index incrementally.
For this I think once you have created the first purchase order, open the purchase order in edit mode the second time and append the new line items.
If I am getting you wrong please explain the problem statement in more detail.
Regards,
Rara. -
Want to create a multiple Purchase Order using one file source
I'm want to create a multiple purchase order using one source file. I want to read the file source create LINES in a purchase order and when the Vendor code changes I want to Add the purchase order and then create a new purchase order and Add LINES and so on.
Right now I get Item.no is missing [POR1.ItemCode][Line 2]Here is a code sample
Private Sub testcode()
Dim strOrdplanFile As String
Dim oLineRec As SAPbobsCOM.Recordset
Dim strLine As String = ""
Dim ItemName As String
Dim Quantity As String
Dim RequiredDate As String
Dim SupplierType As String
Dim ShipTo As String
Dim Vendor As String
Dim oPurchaseOrder As SAPbobsCOM.Documents
Dim bAddPOrder As Boolean = True
Dim bPurchase As Boolean = False
Dim sSQL As String
Dim iReads As Integer = 1
Dim iCurrentPurchaseNumber As Integer = 0
Dim bErrors As Boolean = False
Dim retCode As Double
oPurchaseOrder = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseOrders)
strOrdplanFile = strFolderLocation & "ORDPLAN.TXT"
If File.Exists(strOrdplanFile) And FileLen(strOrdplanFile) > 0 Then
Dim sr As New StreamReader(strOrdplanFile)
strLine = sr.ReadLine()
txtPurRec.String = "0"
oFormStatus.Update()
Try
Do
Vendor = strLine.Substring(0, 8).Trim()
ShipTo = strLine.Substring(12, 8).Trim()
SupplierType = strLine.Substring(26, 1)
ItemName = strLine.Substring(27, 20).Trim()
Quantity = strLine.Substring(94, 8)
RequiredDate = strLine.Substring(206, 9)
oLineRec = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
sSQL = "SELECT PrcrmntMtd, CardCode FROM OITM WHERE ItemCode = '" & ItemName & "'"
oLineRec.DoQuery(sSQL)
If oLineRec.RecordCount() > 0 Then ' if it exists add the record
If oLineRec.Fields.Item(0).Value.ToString = "B" Then
If (bAddPOrder) Then
oPurchaseOrder.CardCode = Vendor
oPurchaseOrder.DocDueDate = RequiredDate
'Add first item to the purchase order
oPurchaseOrder.Lines.ItemCode = ItemName
oPurchaseOrder.Lines.WarehouseCode = ShipTo
oPurchaseOrder.Lines.Quantity = CDbl(Quantity)
oPurchaseOrder.Lines.Add()
bAddPOrder = False
bPurchase = True
iCurrentPurchaseNumber = iCurrentPurchaseNumber + 1
txtPurRec.String = "R: " & iReads & " W: " & iCurrentPurchaseNumber.ToString
oFormStatus.Update()
Else
'compare CardCode to make sure Vendor hasn't change
If (oPurchaseOrder.CardCode.CompareTo(Vendor) = 0) Then
'Add item to the purchase order
oPurchaseOrder.Lines.ItemCode = ItemName
oPurchaseOrder.Lines.WarehouseCode = ShipTo
oPurchaseOrder.Lines.Quantity = CDbl(Quantity)
oPurchaseOrder.Lines.Add()
Else
'vender code changed
retCode = oPurchaseOrder.Add()
If (retCode <> 0) Then
SBO_Application.MessageBox(oCompany.GetLastErrorDescription(), 1, "OK", "", "")
End If
oPurchaseOrder.CardCode = Vendor
oPurchaseOrder.DocDueDate = RequiredDate
'Add first item to the purchase order
oPurchaseOrder.Lines.ItemCode = ItemName
oPurchaseOrder.Lines.WarehouseCode = ShipTo
oPurchaseOrder.Lines.Quantity = CDbl(Quantity)
oPurchaseOrder.Lines.Add()
bAddPOrder = False
bPurchase = True
iCurrentPurchaseNumber = iCurrentPurchaseNumber + 1
txtPurRec.String = "R: " & iReads & " W: " & iCurrentPurchaseNumber.ToString
oFormStatus.Update()
End If
iReads = iReads + 1
End If 'new
strLine = sr.ReadLine()
End If
End If
Loop Until sr.EndOfStream
Catch ex As Exception
MsgBox(ex.Message, MsgBoxStyle.Information)
End Try
If (bPurchase) Then
lRetCode = oPurchaseOrder.Add()
End If
sr.Close()
swLogFile.WriteLine("Purchase orders stored : " & iCurrentPurchaseNumber)
oPurchaseOrder = Nothing
End If
End Sub -
Create Purchase Order using B1ws SAP 8.81
Hi Experts I am creating a Purchase Order using the Web Services SAP 8.81 PL7 SQL 2008, the problem is when i create the PO in business one it comes without the deatails on the lines like Price and Line total what am i doing wrong this is the code for the lines
Dim docLine As PurchaseOrdersService.DocumentDocumentLine = New PurchaseOrdersService.DocumentDocumentLine With
.ItemCode = gvItems.Rows(i).Cells(1).Value, .ItemDescription = gvItems.Rows(i).Cells(2).Value, .Quantity = gvItems.Rows(i).Cells(5).Value, .UnitPrice = Double.Parse(gvItems.Rows(i).Cells(6).Value) _
, .Price = Double.Parse(gvItems.Rows(i).Cells(6).Value), .LineTotal =
Double.Parse(gvItems.Rows(i).Cells(9).Value)} If i = 0 Then
poDoc.DocumentLines = Array.CreateInstance(docLine.GetType(), Me.gvItems.RowCount - 1)
End If
poDoc.DocumentLines.SetValue(docLine, i)
Regards BenHi Benedict,
Please review B1WS samples and documentation, it is stated there the following sentence:
Per each object property with a type different of string an associated Boolean property with the same
name but finishing with u201CSpecifiedu201D is automatically created by .NET environment. You are forced to set
this property value to u201Ctrueu201D if you want the associated property to be correctly set in the DI Server SOAP
message automatically formatted.
Hope it helps,
Trinidad. -
Create a purchase order using transaction ME21
Hello Abappers,
I want to create a STO( purchase order using the sales order data) using transcation ME21.
Kindly provide step wise details as i am a technical person adn dont have to functional knowledge to create it.Also mention where the pricing conditions, the delivery address of the receiving plant. etc will have to be mentioned.
Thanks a lot in advance.
Appropriate points wil be rewarded to.check this link::
http://web.mit.edu/sapr3/windocs/bpors03m.htm
from Purchase Requisition
http://web.mit.edu/sapr3/windocs/bpors03n.htm -
HOW TO CREATE PURCHASE ORDER USING BAPI
HI FRIENDS,
I HAVE URGENT REQUIREMNT ,TO CREATE PURCHASE ORDER USING BAPI.PLS HELP ON THIS.
UR'S
RAVIHi
See the sample code and do accordingly
REPORT zpo_bapi_purchord_tej.
DATA DECLARATIONS *
TYPE-POOLS slis.
TYPES: BEGIN OF ty_table,
v_legacy(8),
vendor TYPE bapimepoheader-vendor,
purch_org TYPE bapimepoheader-purch_org,
pur_group TYPE bapimepoheader-pur_group,
material TYPE bapimepoitem-material,
quantity(13),
delivery_date TYPE bapimeposchedule-delivery_date,
net_price(23),
plant TYPE bapimepoitem-plant,
END OF ty_table.
TYPES: BEGIN OF ty_alv,
v_legs(8),
success(10),
v_legf(8),
END OF ty_alv.
TYPES: BEGIN OF ty_alv1,
v_legf1(8),
v_msg(500),
END OF ty_alv1.
*-----Work area declarations.
DATA: x_table TYPE ty_table,
x_header TYPE bapimepoheader,
x_headerx TYPE bapimepoheaderx,
x_item TYPE bapimepoitem,
x_itemx TYPE bapimepoitemx,
x_sched TYPE bapimeposchedule,
x_schedx TYPE bapimeposchedulx,
x_commatable(255),
x_alv TYPE ty_alv,
x_alv1 TYPE ty_alv1,
x_alv2 TYPE ty_alv1.
*-----Internal table declarations.
DATA: it_table TYPE TABLE OF ty_table,
it_commatable LIKE TABLE OF x_commatable,
it_item TYPE TABLE OF bapimepoitem,
it_itemx TYPE TABLE OF bapimepoitemx,
it_sched TYPE TABLE OF bapimeposchedule,
it_schedx TYPE TABLE OF bapimeposchedulx,
it_alv TYPE TABLE OF ty_alv,
it_alv1 TYPE TABLE OF ty_alv1,
it_alv2 TYPE TABLE OF ty_alv1.
DATA: po_number TYPE bapimepoheader-po_number,
x_return TYPE bapiret2,
it_return TYPE TABLE OF bapiret2,
v_file TYPE string,
v_temp(8),
v_succsount TYPE i VALUE 0,
v_failcount TYPE i VALUE 0,
v_total TYPE i.
DATA: v_temp1(5) TYPE n VALUE 0.
DATA: x_event TYPE slis_t_event,
x_fieldcat TYPE slis_t_fieldcat_alv,
x_list_header TYPE slis_t_listheader,
x_event1 LIKE LINE OF x_event,
x_layout1 TYPE slis_layout_alv,
x_variant1 TYPE disvariant,
x_repid2 LIKE sy-repid.
DATA : it_fieldcat TYPE TABLE OF slis_t_fieldcat_alv.
SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK v_b1 WITH FRAME.
*-----To fetch the flat file.
PARAMETERS: p_file TYPE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK v_b1.
AT SELECTION-SCREEN *
AT SELECTION-SCREEN.
IF p_file IS INITIAL.
MESSAGE text-001 TYPE 'E'.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*-----To use F4 help to find file path.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
v_file = p_file.
START-OF-SELECTION *
START-OF-SELECTION.
PERFORM gui_upload.
LOOP AT it_table INTO x_table.
PERFORM header_details.
v_temp = x_table-v_legacy.
LOOP AT it_table INTO x_table WHERE v_legacy = v_temp.
PERFORM lineitem.
PERFORM schedule.
ENDLOOP.
DELETE it_table WHERE v_legacy = v_temp.
PERFORM bapicall.
MOVE po_number TO x_alv-success.
APPEND x_alv TO it_alv.
CLEAR x_alv.
*-----To clear the item details in internal table after the operation for a header.
REFRESH: it_item,
it_itemx,
it_sched,
it_schedx.
CLEAR: v_temp1.
ENDLOOP.
v_total = v_succsount + v_failcount.
PERFORM display_alv.
FORM GUI_UPLOAD *
FORM gui_upload .
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
TABLES
data_tab = it_commatable
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc = 0.
*-----To fetch the comma seperated flat file into an internal table.
LOOP AT it_commatable INTO x_commatable.
IF x_commatable IS NOT INITIAL.
SPLIT x_commatable AT ',' INTO
x_table-v_legacy
x_table-vendor
x_table-purch_org
x_table-pur_group
x_table-material
x_table-quantity
x_table-delivery_date
x_table-net_price
x_table-plant.
APPEND x_table TO it_table.
ENDIF.
CLEAR x_table.
ENDLOOP.
ENDIF.
ENDFORM. " gui_upload
FORM HEADER_DETAILS *
FORM header_details .
MOVE 'NB' TO x_header-doc_type.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = x_table-vendor
IMPORTING
output = x_table-vendor
MOVE x_table-vendor TO x_header-vendor.
MOVE x_table-purch_org TO x_header-purch_org.
MOVE x_table-pur_group TO x_header-pur_group.
x_headerx-doc_type = 'X'.
x_headerx-vendor = 'X'.
x_headerx-purch_org = 'X'.
x_headerx-pur_group = 'X'.
ENDFORM. " header_details
FORM LINEITEM *
FORM lineitem .
v_temp1 = v_temp1 + 10.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_temp1
IMPORTING
output = v_temp1.
MOVE v_temp1 TO x_item-po_item.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = x_table-material
IMPORTING
output = x_table-material.
MOVE x_table-material TO x_item-material.
MOVE x_table-quantity TO x_item-quantity.
MOVE x_table-net_price TO x_item-net_price.
MOVE x_table-plant TO x_item-plant.
x_itemx-po_item = v_temp1.
x_itemx-material = 'X'.
x_itemx-quantity = 'X'.
x_itemx-net_price = 'X'.
x_itemx-plant = 'X'.
APPEND x_item TO it_item.
APPEND x_itemx TO it_itemx.
CLEAR: x_item, x_itemx.
ENDFORM. " lineitem1
FORM SCHEDULE *
FORM schedule .
MOVE x_table-delivery_date TO x_sched-delivery_date.
MOVE v_temp1 TO x_sched-po_item.
x_schedx-delivery_date = 'X'.
x_schedx-po_item = v_temp1.
APPEND x_sched TO it_sched.
APPEND x_schedx TO it_schedx.
CLEAR: x_sched, x_schedx.
ENDFORM. " schedule
FORM BAPICALL *
FORM bapicall .
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = x_header
poheaderx = x_headerx
IMPORTING
exppurchaseorder = po_number
TABLES
return = it_return
poitem = it_item
poitemx = it_itemx
poschedule = it_sched
poschedulex = it_schedx.
IF po_number IS NOT INITIAL.
v_succsount = v_succsount + 1.
MOVE x_table-v_legacy TO x_alv-v_legs.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ELSE.
v_failcount = v_failcount + 1.
MOVE x_table-v_legacy TO x_alv-v_legf.
MOVE x_table-v_legacy TO x_alv1-v_legf1.
LOOP AT it_return INTO x_return.
IF x_alv1-v_msg IS INITIAL.
MOVE x_return-message TO x_alv1-v_msg.
ELSE.
CONCATENATE x_alv1-v_msg x_return-message INTO x_alv1-v_msg SEPARATED BY space.
ENDIF.
ENDLOOP.
APPEND x_alv1 TO it_alv1.
CLEAR x_alv1.
ENDIF.
ENDFORM. " bapicall
FORM DISPLAY_ALV *
FORM display_alv .
PERFORM x_list_header.
PERFORM build_fieldcat CHANGING x_fieldcat.
x_repid2 = sy-repid.
x_event1-name = 'TOP_OF_PAGE'.
x_event1-form = 'TOP_OF_PAGE'.
APPEND x_event1 TO x_event.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = x_repid2
is_layout = x_layout1
it_fieldcat = x_fieldcat
i_callback_user_command = 'USER_COMMAND'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_save = 'A'
is_variant = x_variant1
it_events = x_event
TABLES
t_outtab = it_alv
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " display_master_data
FORM USER_COMMAND *
FORM user_command USING ucomm LIKE sy-ucomm selfield
TYPE slis_selfield.
READ TABLE it_alv INTO x_alv INDEX selfield-tabindex.
CLEAR : x_alv2,it_alv2[].
LOOP AT it_alv1 INTO x_alv1 WHERE v_legf1 = x_alv-v_legf.
x_alv2 = x_alv1.
APPEND x_alv2 TO it_alv2 .
ENDLOOP.
DATA : it_fieldcat TYPE slis_t_fieldcat_alv.
DATA : x3_fieldcat LIKE LINE OF it_fieldcat.
CLEAR : x3_fieldcat,it_fieldcat[].
CLEAR x3_fieldcat.
x3_fieldcat-col_pos = '1'.
x3_fieldcat-fieldname = 'V_LEGF1'.
x3_fieldcat-reptext_ddic = text-111.
x3_fieldcat-ref_tabname = 'IT_ALV2'.
APPEND x3_fieldcat TO it_fieldcat.
CLEAR x3_fieldcat.
CLEAR x3_fieldcat.
x3_fieldcat-col_pos = '1'.
x3_fieldcat-fieldname = 'V_MSG'.
x3_fieldcat-reptext_ddic = text-112.
x3_fieldcat-ref_tabname = 'IT_ALV2'.
APPEND x3_fieldcat TO it_fieldcat.
CLEAR x3_fieldcat.
x_layout1-colwidth_optimize = 'X'.
x_layout1-zebra = 'X'.
IF it_alv2[] IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = x_repid2
is_layout = x_layout1
it_fieldcat = it_fieldcat
i_save = 'A'
i_callback_top_of_page = 'TOP'
is_variant = x_variant1
it_events = x_event
TABLES
t_outtab = it_alv2
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDIF.
ENDFORM.
FORM USER_COMMAND *
FORM top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = 'Commentry'.
ENDFORM.
FORM BUILD_FIELDCAT *
FORM build_fieldcat CHANGING et_fieldcat TYPE slis_t_fieldcat_alv.
DATA: x1_fieldcat TYPE slis_fieldcat_alv.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '1'.
x1_fieldcat-fieldname = 'V_LEGS'.
x1_fieldcat-reptext_ddic = text-108.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '2'.
x1_fieldcat-fieldname = 'SUCCESS'.
x1_fieldcat-key = 'X'.
x1_fieldcat-reptext_ddic = text-109.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '3'.
x1_fieldcat-fieldname = 'V_LEGF'.
x1_fieldcat-key = 'X'.
x1_fieldcat-reptext_ddic = text-110.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
ENDFORM. " build_fieldcat
FORM BUILD_LIST_HEADER *
FORM x_list_header.
DATA: x_list_header1 TYPE slis_listheader.
*-----List Header: type H
CLEAR x_list_header1 .
x_list_header1-typ = 'H'.
x_list_header1-info = text-105.
APPEND x_list_header1 TO x_list_header.
*-----List Key: type S
x_list_header1-typ = 'S'.
x_list_header1-key = text-106.
x_list_header1-info = v_total.
APPEND x_list_header1 TO x_list_header.
*-----List Key: Type S
CLEAR x_list_header1 .
x_list_header1-typ = 'S'.
x_list_header1-key = text-107.
x_list_header1-info = v_succsount.
APPEND x_list_header1 TO x_list_header.
ENDFORM. " build_list_header
FORM TOP_OF_PAGE *
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = x_list_header.
ENDFORM. " TOP_OF_PAGE
Reward points if useful
Anji -
Create an AP Invoice based on a Purchase Order using SDK
Hi,
What are the steps to create an AP Invoice based on a Purchase Order using DI API?
Which methods of which objects to use and what parameters to pass?
Thanks.Hi Rajesh,
Here is a sample to create an Invoice based on a Sales Order. The same way you can change as per your requirement:
SAPbobsCOM.Documents oInvoice = default(SAPbobsCOM.Documents);
oInvoice = (SAPbobsCOM.Documents)SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices);
oInvoice.CardCode = "C000003";
oInvoice.DocDueDate = DateAndTime.Now;
oInvoice.Lines.BaseType = Convert.ToInt32(SAPbobsCOM.BoObjectTypes.oOrders);
oInvoice.Lines.BaseEntry = Convert.ToInt32(3616);
oInvoice.Lines.BaseLine = 1;
oInvoice.Lines.Quantity = 3;
oInvoice.Lines.Add();
oInvoice.Lines.BaseType = Convert.ToInt32(SAPbobsCOM.BoObjectTypes.oOrders);
oInvoice.Lines.BaseEntry = Convert.ToInt32(3616);
oInvoice.Lines.BaseLine = 2;
int kth = 0;
kth = oInvoice.Add();
if (kth != 0)
int irrcode;
string errmsg;
SBO_Company.GetLastError(out irrcode, out errmsg);
Program.oMainSAPDI.ShowMessage(errmsg, BoStatusBarMessageType.smt_Error);
The main thing to remember is Base Type, Based Entry and Base Line.
Hope it helps.
Thanks & Regards
Ankit Chauhan -
How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0
How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?
Hi,
First go thourh the FM import export parameters list.
Try to create an internal table of type INRI-NRRANGENR for number ranges.
We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
Try to create the ncessary ones using this FM.
In the Exit, EXIT_SAPMM06E_001,
the Export parameters are-
EKKO-EBELN- the PO ios created with in that specified range
Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
Try to code this in the Include provded and keep Breakpint and check the PO number generated.
Reply if u need more help on this.
Reward if helpful.
Best Wishes,
Chandralekha -
What is the BADI while SAVING purchase order using me22n?
what is the BADI while SAVING purchase order using me22n?
while i will save purchase order through me22n, badi should be fire what is badi for that?
regards,
dushyant.Dushyant,
Hopefully you know how to implement the BADI ME_PROCESS_PO_CUST now.
The following are the codes that you can put in the method "Post".
DATA: LW_HEADER TYPE MEPOHEADER,
LW_POSTED_HEADER TYPE MEPOHEADER,
LW_VALID TYPE MMPUR_BOOL,
ITAB_ITEM TYPE PURCHASE_ORDER_ITEMS,
LW_ITEM TYPE MEPOITEM,
ITEM_INTERFACE TYPE PURCHASE_ORDER_ITEM,
ITAB_ACCT TYPE PURCHASE_ORDER_ACCOUNTINGS,
ACCT_INTERFACE TYPE PURCHASE_ORDER_ACCOUNTING,
LW_ACCT TYPE MEPOACCOUNTING,
LW_POSTED_ACCT TYPE MEPOACCOUNTING,
W_ACCT_CHANGED TYPE C,
W_GRANT_AMT TYPE EKPO-NETWR,
W_FINANCE_AMT TYPE EKPO-NETWR,
W_FLAG TYPE C.
Check if PO header data is valid
CLEAR LW_VALID.
CALL METHOD IM_HEADER->IS_VALID
RECEIVING
RE_VALID = LW_VALID.
CHECK LW_VALID = 'X'.
PO header data is valid
Get the newly updated PO header data
CLEAR LW_HEADER.
CALL METHOD IM_HEADER->GET_DATA
RECEIVING
RE_DATA = LW_HEADER.
Get the posted PO header data
CLEAR LW_POSTED_HEADER.
CALL METHOD IM_HEADER->GET_PERSISTENT_DATA
IMPORTING
EX_DATA = LW_POSTED_HEADER
EXCEPTIONS
NO_DATA = 1.
IF SY-SUBRC <> 0.
CLEAR LW_POSTED_HEADER.
ENDIF.
Get PO line items
REFRESH ITAB_ITEM.
CALL METHOD IM_HEADER->GET_ITEMS
RECEIVING
RE_ITEMS = ITAB_ITEM.
LOOP AT ITAB_ITEM INTO ITEM_INTERFACE.
Check if PO line item is valid
CLEAR LW_VALID.
CALL METHOD ITEM_INTERFACE-ITEM->IS_VALID
RECEIVING
RE_VALID = LW_VALID.
IF LW_VALID <> 'X'.
This PO line item is not valid
CLEAR W_ACCT_CHANGED.
EXIT.
ENDIF.
CLEAR LW_ITEM.
CALL METHOD ITEM_INTERFACE-ITEM->GET_DATA
RECEIVING
RE_DATA = LW_ITEM.
Get the account interface
REFRESH ITAB_ACCT.
CALL METHOD ITEM_INTERFACE-ITEM->GET_ACCOUNTINGS
RECEIVING
RE_ACCOUNTINGS = ITAB_ACCT.
LOOP AT ITAB_ACCT INTO ACCT_INTERFACE.
CLEAR LW_ACCT.
Get the newly updated PO item data
CALL METHOD ACCT_INTERFACE-ACCOUNTING->GET_DATA
RECEIVING
RE_DATA = LW_ACCT.
CLEAR LW_POSTED_ACCT.
Get the posted PO item data
CALL METHOD ACCT_INTERFACE-ACCOUNTING->GET_PERSISTENT_DATA
IMPORTING
EX_DATA = LW_POSTED_ACCT
EXCEPTIONS
NO_DATA = 1.
IF SY-SUBRC > 0.
CLEAR LW_POSTED_ACCT.
ENDIF.
IF LW_ACCT-LOEKZ <> LW_POSTED_ACCT-LOEKZ OR
LW_ACCT-KOSTL <> LW_POSTED_ACCT-KOSTL OR
LW_ACCT-PRCTR <> LW_POSTED_ACCT-PRCTR OR
LW_ACCT-PS_PSP_PNR <> LW_POSTED_ACCT-PS_PSP_PNR.
Account assignment was changed
We will force this PO to go through workflow
W_ACCT_CHANGED = 'Y'.
ENDIF.
ENDLOOP.
ENDLOOP. -
Create Sales order from Internal Purchase Order using IDOC
Hello Friends,
I have requirement to create Sales Order from Internal Purchase Order Using IDOC.
Backgorund, we have already configured IDOC orders05 to create Sales Order from external Purchase order from Inbound IDOC, and it is working fine.
Now we have new requirement to create Sales Order from our own Purchase order, i.e. When PO is created in one plant corresponidng sales order automatically must needs to create in another Plant with respect PO.
I m trying to design a solution for above problem as follows,
1.create an Inbound Idoc from PO, by creatiing one new message type on PO save.
2.Process that Inbound IDOC same as it is from external PO.
3.Once processed Sales order will create.
Please help me in step 1. to create Inbound IDOC from PO.
If you want any further clarification please write me.
Thanks,
MaheshI had done a similar scenario before and we achieved it through SAP XI. The problem is with the control record. When we create a ORDERS IDOC from a PO the control record will be for outbound transmission. We sent the file to XI and XI resent it back with some data parsing and a new inbound control record. This way it went neat outbound and inbound.
I'm not sure what kind of architecture you have. If you have to do it within your ECC/R/3, then you could create the outbound IDOC to a new port and write a fresh RFC to pick it up from the same folder and create a new control record for inbound processing.
I haven't tried this; but there is a "processing w. trigger (inbound)" option on the outbound process code. May be you can explore into that a bit more.
I'm sure there could be better approaches to handle this within ECC so if you stumble on any, do write back. I would like to know to update my knowledge .
Maybe you are looking for
-
I would like to "Transfer" all the iMovie files to my Time Capsule.
My MacBook Pro has run out of space. Now I want to "Move" all of my iMovie files to my newly purchased Time Capsule. (Guy in store said wouldn't be a problem) I already have proceeded with the standaard Time mashine backedup (Which took ages even thr
-
Can't add audio to video file in QT 7.1.5 on WinXP.
Quicktime Pro 7.1.5 on a PC running WinXP. I have created a video file (.mov) and now wish to add an Audio track. Following the instructions in Help, however nothing seems to happen - click on the menu item to Edit->Add To Movie but nothing happens -
-
G4 power mac SDRAMM DIMM slots
I re-seated the three boards, but one of them doesn't go down as far as the other two. I don't know if that's right or if there's something wrong with how I'm putting it back in. I don't want to force it and possibly break the board.
-
Adding Modification Adjustment Transports to SPAM queue
Hello; As part of my upgrade, I need to remove a table column as the upgrade to component SAP_APPL will re-insert it. However, if I remove it separately from the upgrade, the activation of the table removes the data - which needs to be kept. I've cre
-
FAQ: What are the System Requirements for the Photoshop CS6?
System Requirements for Photoshop CS6: Windows Intel® Pentium® 4 or AMD Athlon® 64 processor; 2GHz or faster processor Microsoft® Windows® XP with Service Pack 3; or Windows 7 1GB of RAM 1GB of available hard-disk space for installation; additional f