Purchase order with decimal values in held status.

Hello, i have a SC. The quantity is decimal for the line item.When it was approved, the PO got a 'held' status.How do i release the PO and what can i do in order to accept decimal values in my SC ?

Hello,
Are you sure this is not a workflow issue? If it is held, someone either placed it in hold status or something like that. Since, there was nothing to suspect an application error, I don't think the decimals is your issue. If you feel that it is, have you checked OSS.
More information would be helpful....
Regards, Dean.

Similar Messages

Purchase order with Freight Value

Dear All,
My scenario is....
I Purchase some material to my x vendor. when he send the material , he charge freight amount on it. now please suggest me how to create a purchase order with freight value & I want to take freight effect on every material. vendor is not divide freight amount on every material. now what will i do. If i take this effect only one material than My material map get change. How to take this effect on every material.
Regards
Vimal

Hi,
When vendor send material , vendor send firght value invoicce, means at the time of PO you don't know it,so it can be consider as unplanned delivery cost in SAP and you can post this cost in MIRO ,on details tab in unplanned delivery field.
In following path you can decide where this value should add in material cost or G/l account in following path
In SPRO ,Maintain settings as shown MM---> Logistic Invoice Verification -->Incoming Invoice --> Configure How unplanned delivery costs are posted
Regards
Kailas Ugale
Edited by: kailasugale on Dec 14, 2011 10:21 PM

Is it possible to create purchase order with zero value ?

Is it possible to create purchase order with zero value ?

Hi,
There are two scenarios where the purchase order is created with zero value.
1. Standard Purchase order with Free tick indicator.
Whenever we expect a material with free of cost from vendor, we use to put the free indicator in item overview. This means the material is valuated at zero price irrespective of price control in material master. Quanitiy is updated while receipts.
Conditions tab in item detail doesnt appear.
2. Consignment PO.
While creating a purchase order for consignment, the system doesnt ask us the price and the condition tab doesnt appear in item detail.
An info record for consignment must be maintained before making the GR.
Hope i have clarified. If you want any further clarification. please do reply.

Create service purchase order with negative value

Hello,
we created a service purchase order using the specific item category (value D) and with the service number details. We posted the entry service sheet with the transatcion code ML81N and we did the invoice verification.
Now we need to reverse this document flow: in particular our requirement is to create a new purchase order (like a return order for goods) and then to post an entry service sheet with the opposite sign (both cost center and G/L account).
Do you know whick document type I can use or how i can meet this requirement? Please consider that I cannot reverse the original document but I need to create new ones.
Thanks in advance,
Alessandro

check below thread;
service order
yogesh

Service Purchase Order with Negative Value

Hi Experts,
is there a method of creating a purchase order of services that can have negative value on it?
the requirement is that the PO, SES and Invoice of the previously issued PO needs to be adjusted by creating a new Purchase order.
Please advise.
Thank you,
Barakzai.

Hi,
No need to create service PO with negative quantity!
If payment not done for your servicePO, you can cancel invoice document and then revoke SES.
If any other process involved you can do subsequent debit or subsequent credit for your service PO in t.code:MIRO.
Regards,
Biju K

Purchase order with variable value line item

Hello experts,
In SRM 7.0 extended classic scenario after PO approval Is it possible to create a line item with such that even if we change the value(increase/decrease) it wont trigger approval workflow .We needed this because we don't know the exact value for transport such that if the value is modifiable it would help us.At the time of GR it is possible if value is below but if value is more than tolerance then we have to re order the PO then it will go through full approval cycle again we dont want that.Please tell is there any way to create such line item.
Thanks and Regards,
Shiva

Hello,
Are you integrating SUS also for the follow on processes after PO creation or you will be doing the same in ERP ?
If yes then you can achieve this with SRM - SUS integration scenario, by making use of the Limits items with transport as service, where the PO will be created with the certain limit value defined by the purchaser and later vendor can consume the same against the services like varying transport costs within that defined limit in the Purchase order response.
This will not trigger the Approval process again.
Best Regards,
Rahul

Error saving purchase order data decimal values in SAP R/3

sir,
PO was created with currency japanese YEN using Tcode ME21N . The net price was showing 142502300 (in JPY).
when checked in EKPO table , it saved with a value 1425023.00 instead of 142502300 .
what can be done to correct this.
In PO Print out , it showing values as 1425023.00 which is wrong.
SPRO>> NET WEAVER >> GENERAL SETTINGS >> CURRENCY>> SET DECIMAL values FOR CURRENCY CODES is showing 0 decimals against JPY (Japanese YEN)
I want to know where else the Decimal values could have been set to 2 decimal places.
FOr other currencies like US Dollars there is no error.
Regards,
Srinivasa Murthy

Hello Srinivasa
Please check the forum Rules of Engagement - https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement.
Cross posting is not permitted. This issue is already raised in the application area forum which is probably correct. This does not look like a PI technical issue.
Regards
Mark Smyth
XI/PI Moderator

Error saving purchase order data decimal values

sir,
PO was created with currency japanese YEN using Tcode ME21N . The net price was showing 142502300 (in JPY).
when checked in EKPO table , it saved with a value 1425023.00 instead of 142502300 .
what can be done to correct this.
In PO Print out , it showing values as 1425023.00 which is wrong.
SPRO>> NET WEAVER >> GENERAL SETTINGS >> CURRENCY>> SET DECIMAL values FOR CURRENCY CODES is showing 0 decimals against JPY (Japanese YEN)
I want to know where else the Decimal values could have been set to 2 decimal places.
FOr other currencies like US Dollars there is no error.
Regards,
Srinivasa Murthy

Hi Srinivasa,
Use T. code OY01 and you can try 3rd option of decimal format that is 1234567, 89 for the same.
Regards,
Shailesh Verma

Purchase order with quantity range value

Hi All,
I want to have PO price to be taken from vendor info with quantity based values.
For ex: The vendor has fixed a rate for 500 qty with X rate. and above 500 qty Y rate.
My scenario is i want to raise the PO with this rate. How can i do this?
Note: If i do first PO with 300 qty, then rate it is taking is X*300
Now if i do second purchase order, with 300 qty, then the first 200 qty should go with X rate and remaining 100 should go with Y rate. ie, this purchase order will have combination of X & Y rate.
Please give the solution for this.

hi...
U can perform this pricing by doing some modification in ur conditon type...
In M/06 open ur condition type and under Scale tab...chooose scale type ..here assign scale type "D" i.e. Graduated-to interval sc
And config the scale in purchase-info record..
S Type    s quantity     amount
     to            200               X
                     300               y
then it will calculate : 200X+100y=Z
try this out...
Hope it works,,
Thnks
Edited by: ashish2210 on Jul 20, 2011 3:20 PM

Open Purchase Orders at Retail Value

Hi
I need to show Open Purchase Orders at Retail Value in one of my reports and I am using the key figure - "Open Purchase Orders (Retail Price) - 0RTOPDVSV".
I am using this KF in the cube ZRT_STWK which is part of a multiprovider. Data to this cube is being pulled from 2LIS_03_BF. I couldn't find a probable field in ECC to which I can map the field 0RTOPDVSV in the cube.
Any idea what the likely field could be in ECC which I can map to the key figure 0RTOPDVSV?
Any help is appreicated.
Thank you.
Pavan.

Hi,
To prepare the Open PO report:
Take all the purchase order details from EKKO and EKPO tables by writing a JOIN based on the selection screen paramters:(into ITAB)
Then fetch the related GR and GI data from the table MSEG for each PO Item (using for all entries of ITAB passing EBELn and EBELP to MSEG).
Here based on the movement type you have to consider the GR or GI.
generally for 101 movement types it is fresh GR(goods receipt).
so in this table MSEG you have many entries with different movement types for each PO items, so summing up the correct quanitities(ERFMG) for GR and other s is importants.So from ITAB you know the PO qty for a particular PO and from MSEG you know the qty received(GR QTY), if the both qty's are equal then that order is closed, if bothe qty's are not equal then that order is OPEN.
Fetch the invoice related data from EKBE or RSEG tablse passing EBELN and EBELP fields for them.
GR dat is in MSEG
and Invoice data is in EKBE or RSEG.
Hope this is useful.
regards,
Anji

Purchase Order with Invoice Plan

Hi,
I need to understand working with Invoicing plans for a Purchase Order. Especially the service PO for the rents and other related services.
How the PO is linked to the Invoice Plan and how the process happens in SAP?
Thanks in advance!

Creating an Invoicing Plan
The following procedure describes how to create an invoicing plan with the pre-Enjoy ordering transactions (ME21, ME22, ME23).
The procedure described is also applicable u2013 with certain restrictions u2013 to the Enjoy purchase order (ME21N, ME22N, ME23N).
If you are using the Enjoy purchase order, you will find:
·         The Invoicing Plan button and the indicators for GR-based invoice verification (GR-Based IV), service-based invoice verification (Srv.-Based IV), evaluated receipt settlement (ERS), and invoice receipt (Inv. Receipt) among the item details on the Invoice tab page.
·         The account assignment among the item details on the Account Assignment tab page
·         The Goods Receipt and GR Non-Valuatedindicators among the item details on the Delivery tab page
Prerequisites
Vendor Master Record
Before you can use the invoicing plan with automatic settlement, the Evaluated Receipt Settlement Delivery indicator must be set on the Purchasing Data screen in the vendor master record.
(If you wish to enter invoicing dates manually, this is not necessary.)
Purchase Order
●     We recommend using a framework order (that is a purchase order with a validity period and a reason for rejection). The invoicing plan can adopt the validity period specified in the PO header.
●     PO items for which you wish to use an invoicing plan must have account assignment irrespective of whether a material with a master record, a material described by a short text, or an external service is involved.
●     The GR/IR control facility must be set up in such a way that no goods receipt (or, in the case of services, no service entry) is expected - only an incoming invoice. If you wish to have automatic settlement, you must also set the Evaluated Receipt Settlement indicator.
If you nevertheless wish to allow service entry sheets for the item (e.g. for information purposes only), you must set the GR Non-Val. indicator.
Customizing
Under Purchase Order à Invoicing Plan in Customizing for Purchasing, you can maintain data such as the desired invoicing plan types, date categories, and date descriptions.
Procedure
       1.      Create a purchase order with account assignment (framework order).
Click to access the item overview (or the overview of service lines if you chose item category D for services).
       2.      Enter the desired material or service, the quantity, and the price.
       3.      Select the desired item and click Account Assignments to access the account assignment screen. Enter the account assignment for this item.
       4.      Click to access the item detail screen. Check that the GR/IR control indicators are set correctly on the item detail screen.
○     The GR and GR-Based Invoice Verification or Service-Based Invoice Verification indicators must not be set.
○     IR must be set.
○     You must set ERS if you wish to have Evaluated Receipt Settlement.
○     If you wish to have service entry sheets purely for information, for example, allow non-valuated goods receipt (i.e. select the GR Non-Val and GR indicators).
       5.      Choose Item ® Invoicing Plan. A window appears, in which the invoicing plan types predefined in Customizing are suggested. Choose the desired invoicing plan type and click Continue.
You can use the following invoicing plan types:
○     Periodic Invoicing Plan
■      You use the periodic invoicing plan if the total value of the PO item is to be invoiced in each period.
■      The system creates the invoicing dates automatically on the basis of the settings in Customizing.
■      The invoicing date and the amount to be invoiced are shown for each settlement period (e.g. month). In the case of the periodic invoicing plan, the amount represents the total value of the PO item.
■      You can change the suggested dates and block individual dates for automatic invoicing if necessary.
■      You can enter the start and end dates for the invoicing plan.
■      With the Dates from and Dates to fields, you can determine that an invoicing plan does not contain invoicing dates extending over the entire validity period of the purchase order but only for a certain period within that validity period. (E.g. within a validity period from 1.1. to 12.31, only dates within the period 1.1. to 06.30.)
■      With the Horizon field, you control how far into the future dates can be created. If you enter a date rule that adds six months to the current date here, invoicing dates will be created for just half a year in advance in each case.
The system automatically creates new dates if you change the invoicing plan or when you invoke the transaction for Updating Periodic Invoicing Plans. See Generating Further Invoicing Plan Dates
■      The In Advance indicator allows you to specify whether the invoice is to be created with regard to a prior or subsequent period. (E.g. at the beginning of February, either in advance for the month of February or in arrears for the month of January).
■      In addition, fields with information on the existing invoicing plan are displayed (e.g. the calendar upon which the date determination process is based).
○     Partial Invoicing Plan
■      You use the partial invoicing plan if the total value of the PO item is to be invoiced in several partial amounts.
■      You get an empty date overview in which you can manually enter the desired dates.
■      If you work with a reference invoicing plan, the system automatically generates dates in accordance with the reference plan.
You have the following options:
●      You create a reference invoicing plan in Customizing for the invoicing plan type.
●      You enter an existing invoicing plan as reference plan directly in the invoicing plan for the PO item.
■      You can flag a date in field B (Billing/Invoicing Rule) as follows:
●      As a down payment (percentage or value)
●      As an invoicing date (percentage or value)
●      As a final invoice
       6.      Click to return to the item overview.
       7.      Click to save the purchase order item with the invoicing plan.
You can then start the automatic invoice creation process during invoice verification.
For more information, refer to the section Settlement of Amounts Due Under Invoicing Plans.
Once assigned to an item, the invoicing plan type (e.g. partial invoicing plan) cannot be changed. If you wish to assign a different invoicing plan type, you must delete the item and create a new one.
Generating Further Invoicing Plan Dates
If you have assigned a periodic invoicing plan to a PO item but have not initially defined invoicing dates covering the entire validity period of the purchase order, you can generate further dates in due course.
You have created a PO item with a periodic invoicing plan for a certain planned procurement. The purchase order is valid from 1.1. to 12.31. When creating the invoicing plan, you specified one invoicing date per month for the first half of the year. You have not yet planned any dates for the second half of the year because you do not wish information from the invoicing plan to be passed on to purchase order commitments at this stage, for example.
By mid-June, it is clear that the PO is to proceed as envisaged, and you therefore wish to schedule invoicing dates for the remainder of its validity period.
Procedure
To schedule further invoicing dates, proceed as follows:
Choose Purchase order ® Follow-on functions ® Period. invoicing plan
Specify the purchase orders for which invoicing dates are to be generated in the invoicing plan and perform the function.
A log can be created if desired.
Result
The system adds further dates on the basis of information such as the validity period or horizon from Customizing, the purchase order, and the invoicing plan.
regards,
indranil

Acct determination for Account-assigned purchase order with keys not define

Hi,
I'm trying to post an IDOC of type BBPIV through XI to an R/3 system.
The posted idoc in R/3 is in status 51 (Application document not posted) with the error message "Acct determination for Account-assigned purchase order with keys not defined in chart of acts WP2P"
As per my understanding this is something related to FI.
Long text of the error is "The system cannot generate an automatic posting because there is no account determination defined for Account-assigned purchase order with keys in chart of accounts WP2P.
Correct the account determination for Account-assigned purchase order"
Please help me how to solve this.
Regards,
Rashmi

Hiya,
This looks like its a MM posting / transaction.
You need to go to OBYC and maintain the account assignment. If you provide the business scenario (GR into Stock, Subcontracting, etc.) for the process, I may be able to help.
VKOA is for SD account assignment and I don't believe you can use that here.
Cheers.

Duplicate Purchase Order with all fields.

Hi,
I need a method to Duplicate a Purchase Order with ALL the fields. I tryed with a SendKey("^D") method but the new instance not copy the IC data. Looking for a better method, I read about the option to Save as XML the selected purchase, but I don't know what is the procedure to load the "clone instance" stored in the XML into the SBO Form with a new DocEntry.
Anyone knows the better path to do this?
Thanks in advance.
Oscar Sanchez Montaner

Hi Oscar,
The XML method is fine. You export the original PO to an XML file. You can then use XSLT or a .NET XMLDataDocument object (or similar method if you are using another development environment) to remove the values in the DocNum, DocEntry and any other nodes you don't want to clone (eg DocDate). You can then load this back in to SBO using the GetBusinessObjectFromXML method of the Company object. Personally, I like the XSLT method because it's easy to do and very easy to amend without recompiling your addon (eg if you create new UDFs then you can quickly amend the XLST file to include or exclude these fields).
Kind Regards,
Owen

Create blocked purchase order with BAPI_PO_CREATE1

Hi,
I´m creating stock transport orders with BAPI_PO_CREATE1. At first, I need to
set them to the release status 'S' for blocked. After some checks, I want be able
to relase it and create the delivery.
I have found some fields like rel_status inside of the header structure of
BAPI_PO_CREATE1. But when I set this to 'S', the purchase order is created
with status 'released'.
How can I create a purchase order with BAPI_PO_CREATE1 and set it to 'blocked'
first?
Thanks, Arne

No ideas about that?

Purchase order with reference to internal order

Dear all
I am creating a purchase order with reference to a statistical internal order.The total PO value should not exceed the budgeted amount for that statistical internal order.How should i achieve this?
Thanks in advance.
Madhavi

Hello
First Create Budget Profile.
Make Specification In Availability Control as Activation Type ''01- Automatic activation during budget allocation''
Usage 100 and Tick ''Overall'' check box.
After that Make Setting for your Controlling area in SPRO Path '' Define Tolerance Limit for Availibility control''

Purchase order with decimal values in held status.

Similar Messages

Maybe you are looking for