Purchase Order with Service Tax and Sales Tax both

Dear Sir,
We have a scenario where we have to make a Purchase Order for buying some Software . In the PO , we need to mention Service-Tax as well as Sales-Tax both . Pl guide us as whether it is possible to have such condition available in SAP , if yes then what procedure need to be followed .
As at present , we can not charge Service Tax in the PO against the Material Purchase . Service Tax can be charged only against the Services being purchased .
Pl guide us .
With Thanks and Regards
B Mittal

Hi
If you are talking about a MM pricing procedure create two condition types by copying a standard ( take RAOO and then change the Plus/minus to " Positive" there by u can include this in your PO print as well.
regards
Mahesh

Similar Messages

  • SD: Service tax and sales tax

    Dear All
    My client has 3 plants in different states and in to erection activities. while configuring the service tax and sales tax i have created  single G/L accounts for the service tax and sales tax based on tax code.
    Now my client is asking how can check the service tax payable and sales tax payable as per plant basis.
    With my config all service tax will go to one G/L account , VAT will go to one account . how can we able check plant wise details.
    Suggest me the way
    Regards
    Satya

    Hello
    As per my experience, the GL Acc for Service Tax & VAT can't be same. Check with your client.
    Anyways, as per your requirement for VAT
    1. Maintain 3 Tax code corresponding to your Plant. This will help you in different Tax Code differnet GL Acc
    Say,
    V1 - Output TaxCode AP
    V2 - Output TaxCode KA
    V3 - Output TaxCode TN
    2. In Tcode OB40 - in Rules activate Tax code. By doing this, it will activate TAX CODE & ACCOUNT in account section.
    With you can maintain,
    V1 - 3888001
    V2 - 3888002
    V3 - 3888003
    3. Maintain access sequence Country/Plant/PlntRegion/TaxCl1Cust/TaxCl1Mat. in Tax Condition Type.
    Then maintain condition record (VK11) for your VAT.
    Say,
    Country - Plant- PlntRegion - TaxCl1Cust - TaxCl1Mat.
    IN - 3010 - AP - 01 - 01 - 4 % - V1
    IN - 3020 - KA - 01 - 01 - 4 % - V2
    IN - 3030 - TN - 01 - 01 - 4 % - V3
    Similarly, you can do for Service tax also.
    Thanks & Regards
    JP

  • Service Tax and Sales Tax-India

    In SAP how we can enter both Service Tax and Sales tax in single invoice. Is there is any option to enter both tax code in a single invoice?

    Hi
    For certain type of Vendor Invoices, both service tax and VAT is applicable in India. This can be done with the help of your tax procedure, where in you calculate service tax on Base Amount and VAT on the BASE AMOUNT plus Excise, if applicable. You need to create a single tax code like that and maintain the suitable condition records. I guess the standard TAX PROCEDURE TAXINN also takes care of this requirement.
    Regards
    Sanil

  • Use Tax and Sales Tax

    Hi ,
    I want to know exactly what is use tax and Sales Tax. and how it is effects the business process if Use tax or sales tax is used.
    Thanks

    Sales tax is applicable to Sales within a state. Use tax is applicable on purchase from other state.
    It is clearly explained in SAP Library. Follow the link attached below:
    http://help.sap.com/saphelp_47x200/helpdata/en/e6/149e36d10e057ee10000009b38f889/frameset.htm
    Thanks
    Palani

  • Report to Purchase Orders with Good Receipt and pending for Invioce Receipt

    Hello,
    I'm looking a report bring me Purchase Orders with Goods Receipt and waiting for Invioce Verificacion (MIRO).
    I appreciate any help.
    Regards,
    Hector

    Hi,
    ME2N - In selection screen, enter Selection parameters as
    WE102 i.e. Goods receipt exists and in output screen put a filter on "Still to be invoiced (qty)" and "Still to be invoiced (val.)" as not equal to zero OR greater than Zero.
    OR use RECHNUNG i.e. Open invoices and execute the report
    OR Use MB5S - GR/IR Balances

  • How to link Sales Order with Service Contract and then with Install Base?

    Hi Friends,
    1) I would like to know the integeration process from sales order to Service Contract and then with Install Base.
    2) I couldn't see anything enabled in Service Tab in Order Lines, its grayed out. Is there any set up/profile option to get it enabled?
    3) How can we create AR invoice from Service Contract?
    Please let me know if anyone has idea on this.
    Thanks in Adavance,
    Vara

    Dear Sid,
    Thanks for your promt response.
    Let me explain you what I did.
    1) I have booked a Bill Only sales order which has one order line, mentioned it as Service Item and provided the same details in Service Tab in Order lines. Now Line status is "Fulfilled"
    2) Then Submitted Workflow Back Ground Process for OM Order Lines and it has created an AR Invoice and closed the line
    3) And then submitted "Service Contracts Order Capture Integration Program" from SErvice Contracts Responsibility and it completed normal.
    4) Now I went in to Launch Contracts Window and queried with the sales order but couldn't see any contract created
    5) Then I went in to Reprocess Order Window and found this order shows an error message as "Referenced Product not present in the Installed Base", then I tried to reprocessed it, but the same error message again.
    Here I have few doubts:
    1) Are the AR invoice and Service Contract Billing Invoices same?
    2) In above scenario AR Invoice has been created, I would like to do the billing from SErvice Contracts and need to create an Invoice in AR? how can I do that?
    because as you explained in one of my questions earlier, A Single Invoice can be created for the whole duration of the contract. I want to do that and trying for the same.
    3) Regarding the above error message, how can I resolve it and create the service contract against that Order?
    Thank you so much for your helpful answers.
    Regards,
    Vara

  • Purchase Order History not appearing for Purchase Order with service items

    A purchase order with a service item has been created.  A SES has been created and Miro transactions as well. When tcode ME2L is executed, the Purchase Order History field is blank. Any configuration missing or is there an applicable OSS note to fix  this?

    Hi,
    It is a coding error.
    Could you please check if you have applied the note 1049031 with the latest version 13?
    Regards,
    Edit

  • Issue when uploading Purchase Order for Services (LSMW and BAPI_PO_CREATE1)

    Hi,
    I`m getting the error message "In case of account assignment, please enter acc. assignment data for item" when trying to updoad a Service Purchase Order via LSMW using BAPI_PO_CREATE1.
    I'm using two files, one for header and item data and the other one to service lines. Even the account assignment is maintained the error persists. What am I doing wrong?
    Regards,
    Everton

    Hi
    Check If you are giving the Account Assignment Number correct.
    I mean....for a value...to be recognized by the BAPI, the number should be exactly same as it is stored in DATABASE.
    For example: the number stored in database is 0000123...and you enter 123..in the program, then BAPI would fail to recognise the number. The value should be exactly as the field length.
    Regards,
    Vishwa.

  • Migrating Purchase order with intransit receipt and 3way matched invoice

    Hi All
    Does oracle support to convert the following case from an old SOB to new SOB or from a legacy system to Oracle ebs:
    Purchase Order
    PO receipt only made till Receive AND Deliver is still not done.
    Invoice is already made and matched with PO and Receipt.
    Does oracle interfaces support the above
    Please share your inputs
    Rgds
    Emm

    Dear Sandeep
    Thanks for your inputs and apologies for a late reply
    I am asking whether oracle has such an interface to migrate the folllowing kind of case from one SOB to another SOB
    PO made
    Standard receipt made but only the receive part, not the deliver part
    Invoice is made and matched with the PO and receipt but is yet unpaid
    The above case remains till the cutover hence we need to migrate the PO, receipt and the invoice..right?
    How to do that
    migrate the above all or cancel the invoice, cancel the receipt and cancel the PO than recreate the PO, Receipt and Invoice in the new SOB
    Please give your valuable inputs
    Regards
    emm

  • Transaction Code for Purchase Order with Network, Activity, and Element

    I have been asked for a transaction code that will allow the user to view the Purchase Order, Network, Activity, and Element on the same transaction.  I have been able to use CN41 to get them the Purchase Requisition, Network, Activity, and Element, but cannot seem to find one for the Purchase Order. 
    I feel like this should be easy...
    Any ideas?

    Hi,
    I would recommend you to test BAdI ME_PROCESS_PO_CUST.
    Regards,
    Edit

  • Subcontract Purchase Order with delivery address from Sales Order Ship-to?

    Hi
    My client has a Sales order for a subcontracted product.  The subcontractor should send the product directly to the customer that is on the sales order.  Currently, the delivery address on the PO is the home address of the client.
    My first option is to create a vendor address matching the ship-to and enter that manually in the Delivery Address field in the PO. But, i would like this to populate automatically.  Is this possible?
    thanks for your suggestions.
    Oll

    >
    Oll wrote:
    > Hi
    >
    > My client has a Sales order for a subcontracted product.  The subcontractor should send the product directly to the customer that is on the sales order.  Currently, the delivery address on the PO is the home address of the client.
    >
    > My first option is to create a vendor address matching the ship-to and enter that manually in the Delivery Address field in the PO. But, i would like this to populate automatically.  Is this possible?
    >
    > thanks for your suggestions.
    >
    > Oll
    a mixture of third party order (vendor ships directly to customer) and subcontract is not possible. third party order would need a S as item category in the PO, while subcontract order needs a L at the very same field.
    We created a storage location and a shipping point for the subcontractor. The sales order is created as a standard sales order that makes use of this storage location and shipping point.
    MRP run then creates a request to produce that material, based on the special procurement indicator in material master it is known that the material is to be procured via subcontract order.
    We then receive the finished good into this storage location that represents the subcontractor.
    Then we create a delivery in VL01N to ship this material to the customer.

  • Excise tax and sales tax

    Please give indian taxation and exice information

    Hi
    Pl see following links......
    Taxes:--http://siadipp.nic.in/publicat/invpub/taxation.htm
                http://www.cbec.gov.in/excise/cx-manual/manual/index1.htm

  • Purchase order with zero quantity

    Hi all,
    When a replenishment delivery is ceated in product view, APO automatically creates purchase order with zero quantity and the replenishment delivery's receipt element. APO does not transfer the purchase order to R/3. Do you have an idea about the problem?
    Thanks,
    Burak

    Plese try to send change pointer through /SAPAPO/C5 - Process Change Pointers .
    Also check your publication setting in Spro.( Maintain Distribution defination )
    Manish

  • Transfer of tax indicator to purchase order for service items in shopping cart

    Hi all.
    I have a problem with the tax indicator in the shopping carts and in the backend purchase orders for service items. If I create a shopping cart with service items with different tax indicators, the backend purchase order have a unique item including all the services. So, all the PO items are under one tax indicator while in the shopping cart there is more than one indicator. I mean, the PO is not correctly replicated with the information of the SC.
    Example: shopping cart in SRM with 3 items, tax codes: V1, V2, V1. The standard code transfers the information to the backend, and creates a purchase order with an unique item with the 3 services under tax code V1. So, the second service is not under the correct tax code, and will be wrongly invoiced.
    We have debugged all the code of the process, and we think it is a standard bug. When you replicate a PO in the backend from a SC in SRM, have you experienced this behaviour, or the service items are grouped in different PO items each one with the correct tax indicator?
    Thanks in advance.

    Hi again...
    I forgot to mention that we have found and applied the note 1822107 (Purchase order: wrong tax code for PO with 2 service items), that fits exactly to our problem. But after testing, it doesn't work.
    Regards.

  • Edit back to back sales and purchase order with dropped ship warehouse

    Hi
    Our Client request to be able to edit back to back sales and purchase order with Drop Shipped WH which is frequently required according to their business nature in overseas trading.
    Kedalene Chong

    Hi Daniel,
    In the PO Ship To address field, the database/company address will appear until a warehouse is selected. Once a WH is selected, that is the address that will appear. If there is no WH address, the company address is indicated in the field (note: no company name just the address).
    If you want a different address/name, you can type it into the ShipTo address field and the PLD template will use whatever is in the field.
    If it is because there is no company name on the PO - does this mean you want a different company name than the one in the PO header. If this is the case and the ShipTo address & company name is always the same, you can update the PLD template by changing the ST address field to Text and enter the company name & address you want on the PO. This will appear on every PO regardless of what is in SAP. If you want the company name to always be the same, add a text field above the ST address field and fill in the company name; the address will be pulled from the PO Logistics ST field (per the first paragraph above).
    If this is not what you want, please explain in more detail what you would like to do.
    Heather

Maybe you are looking for