Purchase order with variable value line item

Hello experts,
In SRM 7.0 extended classic scenario after PO approval Is it possible to create a line item with such that even if we change the value(increase/decrease) it wont trigger approval workflow .We needed this because we don't know the exact value for transport such that if the value is modifiable it would help us.At the time of GR it is possible if value is below but if value is more than tolerance then we have to re order the PO then it will go through full approval cycle again we dont want that.Please tell is there any way to create such line item.
Thanks and Regards,
Shiva

Hello,
Are you integrating SUS also for the follow on processes after PO creation or you will be doing the same in ERP ?
If yes then you can achieve this with SRM - SUS integration scenario, by making use of the Limits items with transport as service, where the PO will be created with the certain limit value defined by the purchaser and later vendor can consume the same against the services like varying transport costs within that defined limit in the Purchase order response.
This will not trigger the Approval process again.
Best Regards,
Rahul

Similar Messages

Is it possible to create purchase order with zero value ?

Is it possible to create purchase order with zero value ?

Hi,
There are two scenarios where the purchase order is created with zero value.
1. Standard Purchase order with Free tick indicator.
Whenever we expect a material with free of cost from vendor, we use to put the free indicator in item overview. This means the material is valuated at zero price irrespective of price control in material master. Quanitiy is updated while receipts.
Conditions tab in item detail doesnt appear.
2. Consignment PO.
While creating a purchase order for consignment, the system doesnt ask us the price and the condition tab doesnt appear in item detail.
An info record for consignment must be maintained before making the GR.
Hope i have clarified. If you want any further clarification. please do reply.

Purchase Order Number in Vendor Line Item (FBl1N) and Clear Vendor (F-44)

Hello,
I am not getting the Purchase Order Number in Vendor Line Item.(FBl1N).
Also during Clear of Vendor through F-44 i am not able to identify the Line item on the basis of Purchase Order Number.
Could any one pleae help me out on this issue as i have to clear the vendor Line item in mass.
Thanks
Nitin Jindal
Moderator: Please, respect the rules of the forum and search SDN before posting new thread. This question has been answered several times. Also, please choose proper forum to post your questions; this one is related to Financials and not to Controlling

Based on my experience std feature from SD-FI . Depending on the SD Billing config which can be by delivery(VTFL) or sales order(VTFA). You can assign options of A: Cust PO No. B Sales order no. C Delivery no. D External delivery no. E Actual invoice number to available header fields of Assignment No. or Reference No. Try it out

Purchase order with Freight Value

Dear All,
My scenario is....
I Purchase some material to my x vendor. when he send the material , he charge freight amount on it. now please suggest me how to create a purchase order with freight value & I want to take freight effect on every material. vendor is not divide freight amount on every material. now what will i do. If i take this effect only one material than My material map get change. How to take this effect on every material.
Regards
Vimal

Hi,
When vendor send material , vendor send firght value invoicce, means at the time of PO you don't know it,so it can be consider as unplanned delivery cost in SAP and you can post this cost in MIRO ,on details tab in unplanned delivery field.
In following path you can decide where this value should add in material cost or G/l account in following path
In SPRO ,Maintain settings as shown MM---> Logistic Invoice Verification -->Incoming Invoice --> Configure How unplanned delivery costs are posted
Regards
Kailas Ugale
Edited by: kailasugale on Dec 14, 2011 10:21 PM

Creating an SRM Purchase Order with a Return Line

Is it possible within standard SRM to create a purchase order with a 'Returns Item' line?
I know it's possible in R/3 but really need to create it via SRM.
Regards
Keith

Ganesh
We are using the Extended Classic Scenario of SRM (and the Sourcing Cockpit) which therefore means that we won't be creating requisitions within R/3.
In the R/3 PO you can create a line item as a 'Returns Line' (MEPO1211-RETPO)
The standard help text is as follows:
Logistics - General (LO)
The returned goods from a customer to an internal or external vendor.
Returns can be divided into the following types, according to vendor and recipient:
Customer returns
Returns to vendor
Returns for stock transfers
I know we can use a BADI to mark this flag in R/3 but for completeness really want to show this as a returns line in SRM too.
Keith

Condition in purchase order not distributed in line items

Hi All,
    I have a condition ZD21 (delivery charges) in purchase order. When i enter the condition at header level, it supposed to distribute the charges among line items. However sap put the entire amount in one of the line items.   The condition has condition class A (surchage), Calc typ B(Fixed Amt) and B as cond cat.   Header condition is selected (not item).
   Sometimes system populate an amount at the header level for this delivery charge.
How can i get the amount to distribute to all line items ? Also, where is the populated amount coming from ? Anyone with any suggestions ?
thanks
joyce

Hi Tej,
Group condition and Header condition were selected. I noticed that for other plants, the delivery distribution works but not for this plant. This wouldn't have anything to do with plants, right ?
What is the group based on for Group Condition ?   Thanks.
Edited by: Joyce Chan on Jan 10, 2012 2:54 PM

Create service purchase order with negative value

Hello,
we created a service purchase order using the specific item category (value D) and with the service number details. We posted the entry service sheet with the transatcion code ML81N and we did the invoice verification.
Now we need to reverse this document flow: in particular our requirement is to create a new purchase order (like a return order for goods) and then to post an entry service sheet with the opposite sign (both cost center and G/L account).
Do you know whick document type I can use or how i can meet this requirement? Please consider that I cannot reverse the original document but I need to create new ones.
Thanks in advance,
Alessandro

check below thread;
service order
yogesh

Purchase order number EBELN in line items of g/l accounts FAGLL03

Hi,
nevertheless the purchase order is filled in the BSEG segment it does not appear in the fitting column in the line items of FAGLL03.
Does anyone know why and how to solve this?
Thank you,
Theresia

HI,
Please use transaction OBVU you already add fields BSEG-EBELN and BSEG-EBELP to the list of special fields.
Did you run program RFPOSXEXTEND and BALVBUFDEL after that ?
Then you should choose these fields in your line item display. Make sure that you are using the special fields and not the standard fields. The difference can be seen when you click with the right mouse button on the 'Change layout' screen when you
are adding or deleting fields. You can then choose the option 'Show technical field names' and choose the fields 1-U_EBELN, 1-U_EBELP.
Please can you also review the attached notes:
    0207436 - Line items: unfilled fields / double special field
    0320366 - Line items: display special field via menu path
    0215798 - FBL*N: Special fields are not displayed
Hope this helps. Please Assign points if it useful.
Regards
Ravinagh Boni

Purchase order with decimal values in held status.

Hello, i have a SC. The quantity is decimal for the line item.When it was approved, the PO got a 'held' status.How do i release the PO and what can i do in order to accept decimal values in my SC ?

Hello,
Are you sure this is not a workflow issue? If it is held, someone either placed it in hold status or something like that. Since, there was nothing to suspect an application error, I don't think the decimals is your issue. If you feel that it is, have you checked OSS.
More information would be helpful....
Regards, Dean.

Service Purchase Order with Negative Value

Hi Experts,
is there a method of creating a purchase order of services that can have negative value on it?
the requirement is that the PO, SES and Invoice of the previously issued PO needs to be adjusted by creating a new Purchase order.
Please advise.
Thank you,
Barakzai.

Hi,
No need to create service PO with negative quantity!
If payment not done for your servicePO, you can cancel invoice document and then revoke SES.
If any other process involved you can do subsequent debit or subsequent credit for your service PO in t.code:MIRO.
Regards,
Biju K

Report on Purchase order header changes and Line item changes.

Gurus
All changes which has been done in Purchase order can be seen in enviroment----Header changes Or Item changes for a particular PO.
Now end user want to see the changes made in all the purchase orders for a particular project in specified date range.
Suppose there are total 100 POs placed in one month for a particular project. End user want to see the changes MADE (IF ANY) in above POs
Is there any standard report is available to this effect OR it is z development
Atul

HI ,
This report can easily be written useing the tables EKKO and EKPO
First get the PO's created in that date range.
From there get the change document numbers with this extarct the date from CDHDR and CDPOS tables.
regards,
Lalita

Converting Multipule Reqs to a Purchase Order with Delivery Schedule Lines

Is it possible to convert a multiple Purchase Reqs for the same items to a PO that has one line but multipule deliver dates in the Schedule lines - Where the Purchase Reqs have been generated by MRP
Example
I have an SAP Contract 46***** that runs via MRP and creates 3 Reqs for item number 12345. All from the same vendor
             Req 1 delivery date 2/4/10 QTY 50
             Req 2 delivery date 6/4/10 QTY 20
             Req 3 delivery date 10/4/10 QTY 30
Aim is to have 1 PO with line 1 having a QTY 100 but the Delivery Schedule Tab to show the three seperate delivery needs
            date 2/4/10 QTY 50
            date 6/4/10 QTY 20
            date 10/4/10 QTY 30
Any Help?

When i try that the QTY in line one does not alwasy update to the total qty of the reqs and infact the qty on the req doesnt always appear in the schedule line....
This works for me perfect, I never encountred that the item quantity was not updated if I added a new requisition to the schedule.
ME59N should work, do not select per requistion and per delviery date in the New PO section in the selection screen. But set a flag into box create schedules.

Create purchase order with reference to Sales order Line item

Hi All,
i had a requirement that i need to create the Purchase order with reference to sales order line item...
In T.code me27 client requied a input field for sales order no and with that order reference he want the data of line item to PO creation line item screen.....
please sujjust......how to proceed......
regards,
Ravi Nemani

Hi
Go to SPRO->Logistic general->Tax on goods movement->India->Movement types.
Here you will find the group of movement types check which movement types is mantained for the out side movement groups or inward movement.
also check the Material Master in MRP view if the collective requirements (02) is mantained.
Regards
Sri

Purchase order with quantity range value

Hi All,
I want to have PO price to be taken from vendor info with quantity based values.
For ex: The vendor has fixed a rate for 500 qty with X rate. and above 500 qty Y rate.
My scenario is i want to raise the PO with this rate. How can i do this?
Note: If i do first PO with 300 qty, then rate it is taking is X*300
Now if i do second purchase order, with 300 qty, then the first 200 qty should go with X rate and remaining 100 should go with Y rate. ie, this purchase order will have combination of X & Y rate.
Please give the solution for this.

hi...
U can perform this pricing by doing some modification in ur conditon type...
In M/06 open ur condition type and under Scale tab...chooose scale type ..here assign scale type "D" i.e. Graduated-to interval sc
And config the scale in purchase-info record..
S Type    s quantity     amount
     to            200               X
                     300               y
then it will calculate : 200X+100y=Z
try this out...
Hope it works,,
Thnks
Edited by: ashish2210 on Jul 20, 2011 3:20 PM

Purchase Order History not appearing for Purchase Order with service items

A purchase order with a service item has been created. A SES has been created and Miro transactions as well. When tcode ME2L is executed, the Purchase Order History field is blank. Any configuration missing or is there an applicable OSS note to fix this?

Hi,
It is a coding error.
Could you please check if you have applied the note 1049031 with the latest version 13?
Regards,
Edit

Purchase order with variable value line item

Similar Messages

Maybe you are looking for