Purchase Orders with outstanding invoice - How to clear these down?

Hi,
We have a large number of purchase orders with an outstanding invoice which will never be fulfilled. I would like to know what is the process for clearing these down so the purchase orders will be marked for archiving, and so they will not be visible when running me2m with selection parameter RECHNUNG. I've tried setting the final invoice flag but I can still see the order.
Thanks,
Steph.

you have to clear the GR/IR account with MR11.

Similar Messages

MIRO : Avoid to show purchase order with final invoice

Dear guru ,
I enter an invoice with PO reference as vendor using MIRO.
The system show all the purchase orders of the vendor, also the po without remaining amount and quantity.
Does exist a chance to exclude these purchase order ?
Thanks.

Dear ,
thanks but my problem is that the system take the terms of payment from the first purchase order. This can be an old po with not actual terms of payment.
I want to avoid to show these old po.
The refresh button clear the deselect po but maintain the terms of payment of the first po,
Bye,

Purchase Order with Invoice Plan

Hi,
I need to understand working with Invoicing plans for a Purchase Order. Especially the service PO for the rents and other related services.
How the PO is linked to the Invoice Plan and how the process happens in SAP?
Thanks in advance!

Creating an Invoicing Plan
The following procedure describes how to create an invoicing plan with the pre-Enjoy ordering transactions (ME21, ME22, ME23).
The procedure described is also applicable u2013 with certain restrictions u2013 to the Enjoy purchase order (ME21N, ME22N, ME23N).
If you are using the Enjoy purchase order, you will find:
·         The Invoicing Plan button and the indicators for GR-based invoice verification (GR-Based IV), service-based invoice verification (Srv.-Based IV), evaluated receipt settlement (ERS), and invoice receipt (Inv. Receipt) among the item details on the Invoice tab page.
·         The account assignment among the item details on the Account Assignment tab page
·         The Goods Receipt and GR Non-Valuatedindicators among the item details on the Delivery tab page
Prerequisites
Vendor Master Record
Before you can use the invoicing plan with automatic settlement, the Evaluated Receipt Settlement Delivery indicator must be set on the Purchasing Data screen in the vendor master record.
(If you wish to enter invoicing dates manually, this is not necessary.)
Purchase Order
●     We recommend using a framework order (that is a purchase order with a validity period and a reason for rejection). The invoicing plan can adopt the validity period specified in the PO header.
●     PO items for which you wish to use an invoicing plan must have account assignment irrespective of whether a material with a master record, a material described by a short text, or an external service is involved.
●     The GR/IR control facility must be set up in such a way that no goods receipt (or, in the case of services, no service entry) is expected - only an incoming invoice. If you wish to have automatic settlement, you must also set the Evaluated Receipt Settlement indicator.
If you nevertheless wish to allow service entry sheets for the item (e.g. for information purposes only), you must set the GR Non-Val. indicator.
Customizing
Under Purchase Order à Invoicing Plan in Customizing for Purchasing, you can maintain data such as the desired invoicing plan types, date categories, and date descriptions.
Procedure
       1.      Create a purchase order with account assignment (framework order).
Click to access the item overview (or the overview of service lines if you chose item category D for services).
       2.      Enter the desired material or service, the quantity, and the price.
       3.      Select the desired item and click Account Assignments to access the account assignment screen. Enter the account assignment for this item.
       4.      Click to access the item detail screen. Check that the GR/IR control indicators are set correctly on the item detail screen.
○     The GR and GR-Based Invoice Verification or Service-Based Invoice Verification indicators must not be set.
○     IR must be set.
○     You must set ERS if you wish to have Evaluated Receipt Settlement.
○     If you wish to have service entry sheets purely for information, for example, allow non-valuated goods receipt (i.e. select the GR Non-Val and GR indicators).
       5.      Choose Item ® Invoicing Plan. A window appears, in which the invoicing plan types predefined in Customizing are suggested. Choose the desired invoicing plan type and click Continue.
You can use the following invoicing plan types:
○     Periodic Invoicing Plan
■      You use the periodic invoicing plan if the total value of the PO item is to be invoiced in each period.
■      The system creates the invoicing dates automatically on the basis of the settings in Customizing.
■      The invoicing date and the amount to be invoiced are shown for each settlement period (e.g. month). In the case of the periodic invoicing plan, the amount represents the total value of the PO item.
■      You can change the suggested dates and block individual dates for automatic invoicing if necessary.
■      You can enter the start and end dates for the invoicing plan.
■      With the Dates from and Dates to fields, you can determine that an invoicing plan does not contain invoicing dates extending over the entire validity period of the purchase order but only for a certain period within that validity period. (E.g. within a validity period from 1.1. to 12.31, only dates within the period 1.1. to 06.30.)
■      With the Horizon field, you control how far into the future dates can be created. If you enter a date rule that adds six months to the current date here, invoicing dates will be created for just half a year in advance in each case.
The system automatically creates new dates if you change the invoicing plan or when you invoke the transaction for Updating Periodic Invoicing Plans. See Generating Further Invoicing Plan Dates
■      The In Advance indicator allows you to specify whether the invoice is to be created with regard to a prior or subsequent period. (E.g. at the beginning of February, either in advance for the month of February or in arrears for the month of January).
■      In addition, fields with information on the existing invoicing plan are displayed (e.g. the calendar upon which the date determination process is based).
○     Partial Invoicing Plan
■      You use the partial invoicing plan if the total value of the PO item is to be invoiced in several partial amounts.
■      You get an empty date overview in which you can manually enter the desired dates.
■      If you work with a reference invoicing plan, the system automatically generates dates in accordance with the reference plan.
You have the following options:
●      You create a reference invoicing plan in Customizing for the invoicing plan type.
●      You enter an existing invoicing plan as reference plan directly in the invoicing plan for the PO item.
■      You can flag a date in field B (Billing/Invoicing Rule) as follows:
●      As a down payment (percentage or value)
●      As an invoicing date (percentage or value)
●      As a final invoice
       6.      Click to return to the item overview.
       7.      Click to save the purchase order item with the invoicing plan.
You can then start the automatic invoice creation process during invoice verification.
For more information, refer to the section Settlement of Amounts Due Under Invoicing Plans.
Once assigned to an item, the invoicing plan type (e.g. partial invoicing plan) cannot be changed. If you wish to assign a different invoicing plan type, you must delete the item and create a new one.
Generating Further Invoicing Plan Dates
If you have assigned a periodic invoicing plan to a PO item but have not initially defined invoicing dates covering the entire validity period of the purchase order, you can generate further dates in due course.
You have created a PO item with a periodic invoicing plan for a certain planned procurement. The purchase order is valid from 1.1. to 12.31. When creating the invoicing plan, you specified one invoicing date per month for the first half of the year. You have not yet planned any dates for the second half of the year because you do not wish information from the invoicing plan to be passed on to purchase order commitments at this stage, for example.
By mid-June, it is clear that the PO is to proceed as envisaged, and you therefore wish to schedule invoicing dates for the remainder of its validity period.
Procedure
To schedule further invoicing dates, proceed as follows:
Choose Purchase order ® Follow-on functions ® Period. invoicing plan
Specify the purchase orders for which invoicing dates are to be generated in the invoicing plan and perform the function.
A log can be created if desired.
Result
The system adds further dates on the basis of information such as the validity period or horizon from Customizing, the purchase order, and the invoicing plan.
regards,
indranil

How to Create Purchase Order with Co Product greater than Consumption

Hi All,
I'm new to SAP. Can any one please help with the steps to create PO with Co Product greater than Consumption.
Thanks in Advance.

Hi Srinivasu,
If you are talking about handling by-products during subcontracting follow the following steps.
Create Purchase order with item category "L". In the components tab maintain by-product in negative quantity. If you are not sure about the actual quantity, enter theoretical quantity ( Actual quantity can be adjusted in Subsequent adjustment in Goods receipt).
Hope this helps you.
If this has not helped you, please elaborate your requirement.
Thanks
Vasuki B S

Goods receipt for purchase order with account assignment 'K'

Hello All,
There are couple of purchase orders with acc.*** "K". On doing the GR for these PO's they have been done with mvt type 103 & mvt typ 105.
I understand that material has been directly consumed to the respective cost center.
How do track the internal movement for these materials??
I need to view the stock for these materials at the cost center as in MMBE the stock is seen as ZERO.
All these materials are with QM proc ACTIVE. So a goods receipt is done 105, then the inspection lot is cleared. However, in this case as the material is directly consumed, it is NOT displayed in QA32.
Is the above procedure correct??? Is it better to receive stock against mvt type 101 & then do a 201 mvt ??
Request your inputs.....
Regards,
Manoj Reddy

Account assignment inventories are not maintained. To maintain a report for cost center receiving/issuing you need to make a customized report with help of ABAP.
Other way is to pull report in MB51, with selection criteria COST CENTER and it will give you result of stocks available on cost center. For stocks received on cost center, you can pull report with cost center and movement 101.
201 is used for goods issue to cost center from warehouse, the stock you receive from PO against 101 is directly charged to cost center, so no need to issue later to cost center.
Edited by: Afshad Irani on May 17, 2010 2:17 PM

Purchase Order with FX Cover

Hi there,
If I raise a purchase order and have also arranged FX cover for this amount, in the PO I can select fixed exchange rate, so that this is recorded correctly.
However, if the purchase requires multiple part payments at different rates, how can I correctly record these on the PO if there is only one field and at the header level.
entering a weighted average on the PO results in fx gains/losses that net out, but are not required.
Anyone come accross this scenario? It is not common, but also should not be unique.

[Create Purchase order with program|can we create purchase order through report programming?]
Plz be clear about your requirement instead of posting questions like these.
Don't violate forum rules with Duplicate posts

Purchase order with Freight Value

Dear All,
My scenario is....
I Purchase some material to my x vendor. when he send the material , he charge freight amount on it. now please suggest me how to create a purchase order with freight value & I want to take freight effect on every material. vendor is not divide freight amount on every material. now what will i do. If i take this effect only one material than My material map get change. How to take this effect on every material.
Regards
Vimal

Hi,
When vendor send material , vendor send firght value invoicce, means at the time of PO you don't know it,so it can be consider as unplanned delivery cost in SAP and you can post this cost in MIRO ,on details tab in unplanned delivery field.
In following path you can decide where this value should add in material cost or G/l account in following path
In SPRO ,Maintain settings as shown MM---> Logistic Invoice Verification -->Incoming Invoice --> Configure How unplanned delivery costs are posted
Regards
Kailas Ugale
Edited by: kailasugale on Dec 14, 2011 10:21 PM

I want to see open purchase orders please suggest me how to see it?

i want to see open purchase orders please suggest me how to see it?

A-ERLEDIGT     Closed RFQs
A-OFFEN     Open RFQs
AVIS     Open notification quantities
GUTSCHRIFT     Invoices exist
M-OFFEN     Open target quantity
R-ERLEDIGT     No open invoices
RECHNUNG     Open invoices
W-OFFEN     Open target value
WA351     Open issue quantity
WA352     Issue quantity reversible
WE101     Open goods receipt
WE102     Goods receipt exists
WE103     Open goods receipt
WE104     GR blocked stock exists
WE105     GR blocked stock exists
WE106     Goods receipt exists with IV
WE107     Goods receipt pending IV
which one to be select?

Report to Purchase Orders with Good Receipt and pending for Invioce Receipt

Hello,
I'm looking a report bring me Purchase Orders with Goods Receipt and waiting for Invioce Verificacion (MIRO).
I appreciate any help.
Regards,
Hector

Hi,
ME2N - In selection screen, enter Selection parameters as
WE102 i.e. Goods receipt exists and in output screen put a filter on "Still to be invoiced (qty)" and "Still to be invoiced (val.)" as not equal to zero OR greater than Zero.
OR use RECHNUNG i.e. Open invoices and execute the report
OR Use MB5S - GR/IR Balances

Purchase order with -ve Qty

Hi,
Is it Possible to create purchase order with negative Quantity, right now it is issuing msg "negative Quantity will not be allowed for service based invoice verification".
If yes please suggest the config steps.
Regards,
Rani

not possible.
negative stock can be maintained for storage location for goods issue

Error while creating purchase order with account assignment category "A"

Dear All,
At the time of creating purchase order with account assignment category A - Asset its throwing error as " GL Account 123400 can not be used"
how to resolve this issue"
Edited by: Matt on Sep 16, 2010 10:09 AM - removed bold tags

HI,
Assign all assets GL to Asset Class
spro --> financial accounting new -->assets accounting --> assets accounting (lean Implementation) --> organization structures --> Assign GL
Hope Help U !
Regards,
Pardeep Malik

Acct determination for Account-assigned purchase order with keys not define

Hi,
I'm trying to post an IDOC of type BBPIV through XI to an R/3 system.
The posted idoc in R/3 is in status 51 (Application document not posted) with the error message "Acct determination for Account-assigned purchase order with keys not defined in chart of acts WP2P"
As per my understanding this is something related to FI.
Long text of the error is "The system cannot generate an automatic posting because there is no account determination defined for Account-assigned purchase order with keys in chart of accounts WP2P.
Correct the account determination for Account-assigned purchase order"
Please help me how to solve this.
Regards,
Rashmi

Hiya,
This looks like its a MM posting / transaction.
You need to go to OBYC and maintain the account assignment. If you provide the business scenario (GR into Stock, Subcontracting, etc.) for the process, I may be able to help.
VKOA is for SD account assignment and I don't believe you can use that here.
Cheers.

G/L Account default in purchase order with account assignment category K

Hello gurus,
when creating a new position in a purchase order with account assignment category K "Cost Center", the G/L Account No. is always filled with a default account.
Where and how can I define, what account is used as default GL Account?
The version is sap ecc 6.0.
I will reward points all answer!!
Thank you!

Hi
check the valaution class assigned to the material or the material group (if no material is being used)
Now goto OBYC, Click on the transaction key GBB, for the account modifier VBR, & for the valuation clqass combination - check the G/L account.
Based on this combination the G/L is determined auitomatically in the PO. if you chnage it here ... it will reflect in PO at the time of creation.
Thanks & Regards
Kishore

"All items from purchase order cannot be invoiced"

Hello, 
 
I'm on a SRM 7.0 SP 5 system (ext-classic scenario). Here i try to create an invoice with reference to a Purchase Order, but none of my Purchase Orders can be used for reference. I get the following warning message 'All items from purchase order cannot be invoiced'. 
 
- Created via POWL (create with reference -> invoice/credit memo) i always get the warning message 'All items from purchase order cannot be invoiced'. And no items are converted / can be used for invoicing. Additionally when i use the search option 'find purchase order' within the create invoice transaction i can not find any purchase order to use, it shows 'There is no search result' while there are plenty purchase orders marked with 'invoice expected'. 
 
I am able to create invoices without reference. 
 
I tried vendors set up only for 'invoice expected' and 'GR', 'invoice expected' / 'GR' / 'GR-based-IV' and 'invoice expected' only none of them works, indicators set on vendor master are correctly used on the created purchase order. Outputting PO doesn't make any difference neither. 

I have not set up the following (do i need to?): 
- Deactivated the 'CRME' transaction type, no Credit Memo transaction type has been configured/is active. 
- I have not defined the 'INV' transaction type as a follow-on document for my ECPO transaction type within the define transaction type transaction. 
- Tollerances 
 
edit -> i've already searched thorougly for SAP notes but no note seems to cover this particular problem. 
 
Help is very much appreciated

Solved! Added SYS attribute for back-end system in organisational scheme.

Create blocked purchase order with BAPI_PO_CREATE1

Hi,
I´m creating stock transport orders with BAPI_PO_CREATE1. At first, I need to
set them to the release status 'S' for blocked. After some checks, I want be able
to relase it and create the delivery.
I have found some fields like rel_status inside of the header structure of
BAPI_PO_CREATE1. But when I set this to 'S', the purchase order is created
with status 'released'.
How can I create a purchase order with BAPI_PO_CREATE1 and set it to 'blocked'
first?
Thanks, Arne

No ideas about that?

Purchase Orders with outstanding invoice - How to clear these down?

Similar Messages

Maybe you are looking for