Purchase Req Should not be created if the order is Delivery blocked

Hello All,
I have a requirement in third party sales where the Purchase requistion should not be created if the sales order is delivery Blocked, as and when the delivery block is removed then only the PR should be created.
Please help to fulfill the requirement
Regards
kiran

Hi,
Please check the field purchase req with delivery scheduling in scheduling line configuration.
thanks
Kuntla

Similar Messages

Profarma invoice should not be created if the delivery is incomplete

Hi,
Can any one tell me how to stop profarma invoice creation if the delivery is incomplete...
Actually I have created status group with Billing check box and assinged to incompletion procedure and that procedure to delivery document type.. Now I created delivery with some incompletion later try to create profarma it accepted and created profarma invoice... but I don't want profarma for deliveries if the delivery is incomplete..
Thanks and Regards
Raju Singhi Reddy

There is one Copying Routine 310 or 311 in TCODE VTFL. This will check whether PGI is done or not. If PGI is not done it wont allow to create Invoice.
Please Check.
Sam

System should not allow to do the changes in PO once the ID created.

Hi All,
Once the Inbound Delivery is Created based on the Purchse Order, System should not allow to do the changes in the Purchase Order like Deletion of Item, etc..
Any Configuration Changes is avaliable. ?
Regards,
Sudhakar

Dear,
Please check the staus in order
Current order status xxxx does not allow goods receipt (Message no. C6009)? is this the message?
This will not allow you to do GR for production order when you activate status profile "SAT1" in the production order. After that when you confirm order it will automatically assign next user status i.e. "SAT2" (if not assign it manually in CO02) it will allow you to do GR for that production order.
Regards,
R.Brahmankar

U2018Ea unit of measure has not been created in the language ES u2018in srm

Dear Friends,
I have checked in ECC & SRM in table T006A (UOM languages). UOM "EA" is defined in ES (Spanish).
Also in comm_hierarchy also i chked for product category language maintenance and found maintained in EN,ES languages.
u2018Ea unit of measure has not been created in the language ES u2018
I have tried with sapanish (international sort,dominic,traditional sort)& rest of spanish spoken country languages but i am getting the same error.( IE- tools-general-languages & refreshed the page). u2018Ea unit of measure has not been created in the language ES u2018
Regards,
William

Hi Willam,
When are you getting this error ? i.e. while creation of shopping cart or process purchase order..
I believe this issue is due to creation of UOM..which means EA UOM should be created with EA language.
For further details please have a look on
http://wiki.sdn.sap.com/wiki/display/SI/UnitofMeasurerelatedsettingsinSAP
where they have specified that "Maintain UOM in different languages by logging to the system with different logon language"
Kindly confirm.
Thanks
Rajesh K

After creation of PO system should not allow to change the price in PO

Hi There,
In my scenario once PO is created then after send to vendor PO print document,Users are changing the price in PO.so system should not allow to change the price in PO once PO got saved.
So please advice.

Hi,
you could set in customizing for field selection keys the net price
to display for ME22N so that changes can not be made
(transaction OLME -> purchase order -> Define Screen Layout at Document Level).
Please check that you have set all the relevant field selection
groups to display: AKTV, ME22, ME22N... (read and apply note 30316)
Other workaround is try to do by yourself with the badi
ME_PROCESS_PO_CUST and send your own error message.
Regards,
Edit

PO could not be creating using the Enjoy-BAPI

Hi expersts.
I have a problem with BAPI function module BAPI_PO_CREATE1. When program will generate orders for several suppliers for one supplier "PO could not be creating using the Enjoy-BAPI" and "Purchase order item 00010 still contains faulty schedule lines" and
"Source not included in list despite source list requirement" messages occur. Order won't be generated.
When I am generating order only for that supplier, everything is fine. They are generated and no messages are displayed.
Could anyone help me ?
Thanks, regards.
Dan.

Hi expersts.
I have a problem with BAPI function module BAPI_PO_CREATE1. When program will generate orders for several suppliers for one supplier "PO could not be creating using the Enjoy-BAPI" and "Purchase order item 00010 still contains faulty schedule lines" and
"Source not included in list despite source list requirement" messages occur. Order won't be generated.
When I am generating order only for that supplier, everything is fine. They are generated and no messages are displayed.
Could anyone help me ?
Thanks, regards.
Dan.

Excise invoice should not get created without PGI

Hi,
I have a scenario where the billing document is being generated by the customer without PGI after creation of outbound delivery for exports. (This is as per customer's requirement - Copy control maintained in VTFL for the same - copying requirements 11 )
This creates a situation - excise invoice can be created without PGI - which creates problems for customer. This should not happen.
Customer wants a check during the excise invoice creation - excise invoice should not get created if PGI has not been done.
Kindly advise as to how this can be done.
Regards,
T Saravanan

Dear Saravanan
Two options are there
- in your existing routine itself, you can specify the control in such a way that unless the preceding document is PGId
- apply excise user exits like J_1I7_USEREXIT_EXCISE_BEF_SAVE to achieve the requirement.
thanks
G. Lakshmipathi

"The 'charCode' property of a keyup event should not be used. The value is meaningless." Is this possibly caused by a virus?

I don't know what's wrong with my Mac Mozilla Firefox, version 3.6.8, but today, it started alerting me about an error message on the "Error Console". In every website I visit, it tells me: "The 'charCode' property of a keyup event should not be used. The value is meaningless." Is this possibly caused by a virus?
I saw a pop-up which did not allow me to click it when I scatter the windows on my Mac. I was using Private Browsing, with pop-ups disabled, but one pop-up managed to get passed my settings, and open in another window. It would not allow me to select it, so all I did was to close Firefox, and start a new session. So far, everything has been normal, I also deleted the cookies it installed.
But, I still keep seeing that "Error Console" notice under my "Tools" on the Menu Bar, and when I clicked on it, it listed errors (such as what I listed above).
Would someone explain this to me?
Thanks for your help!

The messages you see in the Error Console are mostly to assist the web site's author in resolving compatibility problems. Some of them can assist you in determining why a web site doesn't work as intended. The one you mentioned doesn't sound that suspicious, except that it occurs on many sites. Perhaps one of your add-ons is trying to monitor what you type?
To diagnose whether this is caused by an add-on or one of your settings, you could try the following:
First, make a backup of your computer for safekeeping. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
Next, try starting Firefox in Firefox
[http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
Does that resolve the errors? If so, then an add-on usually is the culprit. If not, try creating a new (blank) profile: [http://support.mozilla.com/kb/Managing+profiles Managing profiles].
If the new profile works correctly, you can choose between further research on your old profile or moving key settings like bookmarks from your old profile to the new one. [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
Hope this helps.

Tag should not be created at target side in mappin...

Hi all.
I hav a requirement wherein i need to generate a tag of a field depending on the input value .I mean,if input value is not matchin thn tag for that element should not be created .how can i achieve this in an user defined function.
thanks in advance.

The code which I posted was not looking as it is as I written due to some issue with some symbols..
refer this
http://www.flickr.com/photos/23639237@N02/2911950458/
Edited by: Sarvesh Singh on Oct 4, 2008 4:04 PM

COREid Federation Error: A local user session could not be created for the

Hi,
I installed two instances of COREid Federation in my machine. Also installed SiteMinder and LDAP. Source Domain of COREid (8101) uses LDAP as IdMBridge and Destination Domain (9101) uses SiteMinder as IdMBridge. I am trying to access the resource protected by the SiteMinder from the source domain using the URL which is constructed using the pattern given in the PDF:
http://mymachine.domain.com:8101/shareid/saml/ObSAMLTransferService?DOMAIN=DestinationDomain&method=POST&TARGET=http://mymachine.domain.com:8887/Source/Source.html
Assertions are generated and I can see the assertion in the Source domain and transferred to the Destination Domain.
I get the following error in the Destination Domain Shareid Log file:
ERROR - [http10113-Processor3] - RECEIVER: ERROR: A local user session could not be created for the assertion
Please help me to solve this issue?
Note: The Web agent runs on the web server instance 8887.
SiteMinder is able to protect the resource when accessed.

Typically that error occurs when the destinations access management system can't find the user based on the SAML attribute. Check to make sure that the attribute that you are matching on matches exactly.

RFC destination BW could not be created in the source system R3073

I'm creating a source system for our BW (version 7.0) dev client.I'm linking it to our R/3 4.7 QA client. From RSA1 I select create source system, I enter the system information and in the next screen I'm prompted to log on as system administrator. I'm in QA now and the system automatically crated the RFC connection. I test the connection and it runs ok. I log on to the BW client from QA and it logs on just fine. When I exit the screen I get the following message:
RFC destination BW could not be created in the source system message number R3073
Why is this happening? The connection tests just fine.
I'm using RFCREMOTE user in BW and ALEREMOTE in QA with the same password
Any ideas?
thanks

Hi,
I cannot tell you surely the settings for SCC4 now (I can't connect to my sys).
Nevertheless, create your R3QA RFCDEST manually in your BWDEV with SM59.
Create your BWDEV RFCDEST manually in your BWQA .
Perform test and authorization test within SM59 from both sys.
When creating the source system in BW the system will detect the RFC and ask you if you want to use it; accept an proceed the the rest of the procedure.
hope this helps...
Olivier.

SHAREid - A local user session could not be created for the assertion

Problem: We have a client trying to federate to our environment using POST profile but we are getting the following error, "RECEIVER: ERROR: A local user session could not be created for the assertion".
I verified that the user exist in the directory and I am able to execute a test successfully as that user.
Thanks.

There is a requirement that the client needs to send an attribute called "traveler" in the assertion. We found out that the problem occurs only when client sends a attribute in the assertion. When the assertion does not include the attribute, there is no issue. Not sure why that is the case as we have other clients sending the same attribute in the assertion.
Here is the AttributeStatement.
<saml:AttributeStatement xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><saml:Subject><saml:NameIdentifier Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified">XXXXXX</saml:NameIdentifier></saml:Subject><saml:Attribute AttributeName="XXXID" AttributeNamespace="http://schemas.xmlsoap.org/claims"><saml:AttributeValue>XXXXX</saml:AttributeValue></saml:Attribute></saml:AttributeStatement>
It does not have <saml:SubjectConfirmation> and <ConfirmationMethod> element. Can that be a problem?
Thanks,
Vinay
Edited by: user504421 on Jul 9, 2009 2:17 PM

ORA-20100: AppDomain could not be created for the specified security level

We recently updated our development environment to Visual Studio 2010. We have previously deployed (with success) .Net stored procedures from Visual Studio 2005 to our Oracle 10gR2 database. I am currently trying to configure a local instance (called local) of Oracle 10gR2 database to test deployment of .Net stored procedures to Oracle 10gR2 via Visual studio 2010 and ODT version 11.2.0.1.2. I have built the demo from the ode developer guide and gotten as far as deploying it but executing the stored procedures from VS 2010 or SQL*Plus produces the following error...
ORA-20100: AppDomain could not be created for the specified security level
ORA-06512: at "SYS.DBMS_CLR", line 152
ORA-06512: at "SCOTT.GETDEPTNO", line 7
Here is what I have done.
(Server)
1. Installed oracle 10gR2 with ODE.Net
2. Installed Oracle 10gR2 patch set 22
3. Installed ODE upgrade from Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21
(Client)
4. Installed Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21 (In new client home).
5. Installed patch set 22 on 10g client home.
6. Installed Oracle 11g Release 2 ODAC 11.2.0.1.2 with Oracle Developer Tools for Visual Studio(in new 11g client home, only for VS 2010)
I have made some minor changes (GAC) etc. per the following threads...
ODE.NET 11.1.0.7.20 on 10g Database?!
Re: Error: System.TypeInitializationException
The database appears to be fully functional via TOAD - SQL plus etc. I can't find much on this error but it appears Oracle needs some permissions to launch an ASP.Net application that it does not have. Any help would be GREATLY appreciated, don't hesitate to ask for additional details.

The KB article is almost what we have apart from theitalic underlined
part
Consider the following scenario:
You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
You open the Properties dialog box of a user account.
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
You set the Remote Desktop Services Home Folderattribute to the shared folder path.
NoteThis attribute is located on the
Remote Desktop Services Profiletab.
You click Apply or OK.
In this scenario, you receive the following error message:
The home folder could not be created because: The network name cannot be found.
Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
I think the important bit is
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ?

RFC destination BW could not be created in the source system

Hi,
Recently I installed BI 7.0 on Win 2003 and try to create a SAP system in RSA1.
I try to connect R/3 system (on UNIX) and getting RFC connection error u201CRFC user logon failed. Check the connection.u201D & u201CRFC destination BW could not be created in the source systemu201D. However, I test the connection and it is working fine.
Please suggest the solution.
Regards,
Rajesh

Rajesh,
Answer is very simple. I did get same kind of problem. It is very simple answer depending on your R3 version.
Use password all capital letters. Don't include any small letter at all. unlock your user id and change password to capital letter. BW doesn't like small and capital letter mix. this bug is fixed in ECC 6.0
<removed_by_moderator>
*Do not ask for points
Read the "Rules of Engagement"
Regards
RK
Edited by: Juan Reyes on May 21, 2009 9:30 AM

I preordered One Direction's new album Midnight Memories, but did not purchase it. It is not in my downloads or purchases even though it says it's purchased. I can't even buy it because it says purchased and will not let me click the button. Please help!

I preordered One Direction's new album Midnight Memories, but did not purchase it. It is not in my downloads or purchases even though it says it's purchased. I can't even buy it because it says purchased and will not let me click the button. Please help!

Try:
HT2519 Pre-ordered album, it says...: Apple Support Communities

Purchase Req Should not be created if the order is Delivery blocked

Similar Messages

Maybe you are looking for