Purchase Requ still opened
Hi dear gurus,
Can somebody tell me what's the importance of deleting Purchase req still opened in the system. For instance, people from purchaisng department decide sometimes to create P Req just to initiate the material demand from suppliers. After that, they create PO without referencing the P Req (which is a mistake). I have to train them to the right way by deleting them. But I want to have good explanations to give them.
Thanks
Rewards if satisfied.
Hi,
Users should not create PR's manually without any specific requirement.
If they create it, they should convert those PR's into PO.
If they create PO's without the refence of PR, PR will be still open.
During MRP run based on the system setting and the Demand for the material, Planned order or PR's will be created automatically.
these PR's can be converted into PO's.
Generally creation of Manual PR's will happen for indirect materials, wherein you will not have any MRP views or even you may not have material no. at all.
Manual PR with text, without material (a/c assign PR)
Hope this will help you..
Thanks,
Kumar Arcot
Similar Messages
-
Sales order delivered and invoiced but purchase req still open?
Hi all
I have a process where a sales order triggers the creation of a third party purchase requisition.
A PO was created and then deleted because the sales order was filled from a different purchase order where too much had been ordered.
The sales order was delivered and invoiced but the original Purchase Req is still open on MD04!
I can't find anyway to delete the req as it tells me it has to be deleted via the sales order but the sales order appears complete.
Any ideas??Hi,
Deletion of PR can be done using ME52N
This is only possible provided that no purchase order have been assigned. If po has been created, you can only Flag for Deletion.
To delete the pr, select the line(s) you wish to delete and then click on the dustbin icon.
Hope this will help you !!!
Regards,
Krishna O -
HT3258 is there a way to still open the apps i legally purchased?
is there a way to still open the apps i legally purchased? what if that company that wrote the softwear doesn't exists any more??
No, you don't need to re-buy programs to get them to work.
That said, some programs (including Parallels) need newer versions to be compatible with Mountain Lion. So you may need to buy a Parallels upgrade for it to work. You didn't mention the version you have but since only the latest Parallels version is compatible, you may need to pay in this specific case.
Most other apps should run OK, if they're relatively recent. You need to check with the vendors of those applications to see if they run on Mountain Lion or if they have an upgrade.
Applications bought via the Mac App Store are pretty much all compatible with Mountain Lion. -
Hello all! I bought an app on the apple store and eventhough it was charged on my credit card bill it still opens like if I had not purchased it. So I was charged but didn't get the app. I'm trying to report it but doesn't go through. What can I do? Thx
you may delete this discussion. I fixed the issue
-
Custom purchase requsitionto vendor open and cleared payment report
dear all i develop report but i cant ableto show in that open amount and cleared amount of vender in that report so please see this report and feedback me for logic to show open and clear amount of vendor purchase orderwise or vendorwise
report zpo_purchase_history no standard page heading message-id 00.
TABLES : bsik, bsak, lfa1, lfb1, skb1, t001, bapifvdexp_vzzbepp.
type-pools:slis,ICON.
types :begin of ty_po,
banfn type eban-banfn,
"Purchase Requisition Number
bnfpo type eban-bnfpo,
"Item Number of Purchase Requisition
ekgrp type eban-ekgrp, "Purchasing Group
badat type eban-badat,
"Requisition (Request) Date
menge type eban-menge,
KNTTP TYPE EBAN-KNTTP,
PSTYP type eban-PSTYP,
"Purchase Requisition Quantity
meins type eban-meins,
"Purchase Requisition Unit of Measure
lifnr type ekko-lifnr, "Vendor Account Number
bedat type ekko-bedat, "Purchasing Document Date
ebeln type ekpo-ebeln,
"Purchasing Document Number
ebelp type ekpo-ebelp,
"Item Number of Purchasing Document
matkl type ekpo-matkl, "Material Group
mtart type ekpo-mtart, "Material Type
matnr type ekpo-matnr, "Material Number
txz01 type ekpo-txz01, "Short Text
menge1 type ekpo-menge, "Purchase Order Quantity
meins1 type ekpo-meins,
"Purchase Order Unit of Measure
balqty type ekpo-menge, "Balance Quantity
netpr type ekpo-netpr,
"Net Price in Purchasing Document
peinh type ekpo-peinh, "Price Unit
mblnr type mseg-mblnr,
"Number of Material Document
zeile type mseg-zeile, "Item in Material Document
menge2 type mseg-menge, "GR Quantity
meins2 type mseg-meins, "GR Unit of Measure
werks type mseg-werks, "Plant
charg type mseg-charg, "Batch
belnr type rbkp-belnr,
"Document Number of an Invoice Document
bldat type ekbe-bldat, "Document Date in Document
belnr_b type rbkp-belnr,
SHKZG type ekbe-SHKZG , "Debit/Credit Indicator
DMBTR type bsik-dmbtr, "Amount in Local Currency
DMBTR_C type bsAk-dmbtr, "Amount in Local Currency
thick(10) type c, "Thickness
width(10) type c, "Width
length(10) type c, "Length
grade(10) type c, "Grade
BELNR_d type bseg-belnr,
xblnr type bkpf-xblnr,
awkey type bkpf-awkey,
RMWWR type rbkp-RMWWR,
WMWST1 type rbkp-WMWST1,
end of ty_po.
types :begin of ty_ekko,
ebeln type ekko-ebeln,
lifnr type ekko-lifnr,
bedat type ekko-bedat,
end of ty_ekko.
types:begin of ty_ekpo,
ebeln type ekpo-ebeln,
ebelp type ekpo-ebelp,
matnr type ekpo-matnr,
txz01 type ekpo-txz01,
menge type ekpo-menge,
meins type ekpo-meins,
netpr type ekpo-netpr,
peinh type ekpo-peinh,
banfn type ekpo-banfn,
bnfpo type ekpo-bnfpo,
mtart type ekpo-mtart,
end of ty_ekpo.
types :begin of ty_eban,
banfn type eban-banfn,
bnfpo type eban-bnfpo,
matnr type eban-matnr,
menge type eban-menge,
meins type eban-meins,
end of ty_eban.
types : begin of ty_ekbe,
ebeln type ekbe-ebeln,
ebelp type ekbe-ebelp,
belnr type ekbe-belnr,
bldat type ekbe-bldat,
gjahr type ekbe-gjahr,
buzei type ekbe-buzei,
matnr type ekbe-matnr,
DMBTR type ekbe-dmbtr,
shkzg type ekbe-shkzg,
end of ty_ekbe.
types : begin of ty_mseg,
mblnr type mseg-mblnr,
mjahr type mseg-mjahr,
zeile type mseg-zeile,
menge type mseg-menge,
meins type mseg-meins,
ebeln type mseg-ebeln,
ebelp type mseg-ebelp,
matnr type mseg-matnr,
werks type mseg-werks,
charg type mseg-charg,
end of ty_mseg.
types : begin of ty_rbkp,
belnr type rbkp-belnr,
gjahr type rbkp-gjahr,
bldat type rbkp-bldat,
lifnr type rbkp-lifnr,
ZUONR type rbkp-ZUONR,
RMWWR type rbkp-RMWWR,
WMWST1 type rbkp-WMWST1,
end of ty_rbkp.
types : begin of ty_bseg,
bukrs type bseg-bukrs,
belnr type bseg-belnr,
gjahr type bseg-gjahr,
buzei type bseg-buzei,
valut type bseg-valut,
wrbtr type bseg-wrbtr ,
augbl type bseg-augbl,
matnr type bseg-matnr,
lifnr type bseg-lifnr,
ebeln type bseg-ebeln,
end of ty_bseg.
types : begin of ty_rseg,
belnr type rseg-belnr,
gjahr type rseg-gjahr,
ebeln type rseg-ebeln,
ebelp type rseg-ebelp,
matnr type rseg-matnr,
bukrs type rseg-bukrs,
end of ty_rseg.
types : begin of ty_bsik,
belnr type bsik-belnr,
buzei type bsik-buzei,
DMBTR type bsik-DMBTR,
budat type bsik-budat,
shkzg type bsik-shkzg,
ebeln type bsik-ebeln,
lifnr type bsik-lifnr,
end of ty_bsik.
types : begin of ty_bsak,
belnr type bsak-belnr,
lifnr type bsak-lifnr,
ebeln type bsak-ebeln,
DMBTR_C type bsak-DMBTR,
ZUONR type bsak-ZUONR,
end of ty_bsak.
types: begin of ty_bkpf,
BELNR type bkpf-belnr,
xblnr type bkpf-xblnr,
awkey type bkpf-awkey,
end of ty_bkpf.
data: it_po type standard table of ty_po,
it_ekko type standard table of ty_ekko,
it_ekpo type standard table of ty_ekpo,
it_eban type standard table of ty_eban,
it_ekbe type standard table of ty_ekbe,
it_mseg type standard table of ty_mseg,
it_rbkp type standard table of ty_rbkp,
it_rseg type standard table of ty_rseg,
it_bseg type standard table of ty_bseg,
it_bsik type STANDARD TABLE OF ty_bsik with header line,
it_bsak type STANDARD TABLE OF ty_bsak,
it_bkpf type standard table of ty_bkpf,
wa_po type ty_po,
wa_ekko type ty_ekko,
wa_ekpo type ty_ekpo,
wa_eban type ty_eban,
wa_mseg type ty_mseg,
wa_rbkp type ty_rbkp,
wa_rseg type ty_rseg,
wa_bseg type ty_bseg,
wa_ekbe type ty_ekbe,
wa_bsik type ty_bsik,
wa_bsak type ty_bsak,
wa_bkpf type ty_bkpf.
data: it_fcat type slis_t_fieldcat_alv,
it_lshead type slis_t_listheader,
it_sort type slis_t_sortinfo_alv,
wa_fcat type slis_fieldcat_alv,
wa_lshead type slis_listheader,
wa_layout type slis_layout_alv,
wa_sort type slis_sortinfo_alv.
data :it_cl_data like table of clobjdat,
wa_cl_data like clobjdat.
data: values(10) type n.
data: value1(4) type N.
data: c_matkl type ekpo-matkl,
c_matnr type ekpo-matnr,
c_ekgrp type eban-ekgrp,
c_badat type eban-badat,
c_index type sy-tabix,
c_grmenge type mseg-erfmg,
c_low(10) type c,
c_high(10) type c,
c_date type string,
c_bukrs type ekko-bukrs,
c_WERKS type eban-WERKS.
data: gd_date(10).
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
*********Selection screen variables*********
selection-screen:begin of block b1 with frame title text-001.
select-options: s_bukrs for c_bukrs DEFAULT 'bmp1',
s_WERKS for c_WERKS,
s_matnr for c_matnr DEFAULT 'rm-01',
s_matkl for c_matkl ,
s_badat for c_badat ,"obligatory,
s_ekgrp for c_ekgrp.
parameters: ch_bal as checkbox.
selection-screen:end of block b1.
*initialization.
* PERFORM EVENT_CALL.
* PERFORM POPULATE_EVENT.
start-of-selection.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
perform getdata.
perform setdata.
perform fieldcat.
perform display.
*& Form GETDATA
form getdata .
select a~BANFN
a~bnfpo
a~ekgrp
a~badat
a~KNTTP
a~PSTYP
b~ebeln
b~ebelp
b~matkl
b~matnr
b~bukrs
into corresponding fields of table it_po
from eban as a inner join ekpo as b
on a~banfn = b~banfn and
a~bnfpo = b~bnfpo AND
A~KNTTP = B~KNTTP and
a~PSTYP = b~PSTYP
where a~badat in s_badat and
a~ekgrp in s_ekgrp and
a~WERKS in s_WERKS and
b~matnr in s_matnr and
b~matkl in s_matkl and
b~bukrs in s_bukrs and
b~loekz <> 'L' and
a~loekz <> 'X'.
if it_po[] is not initial.
select ebeln
ebelp
matnr
txz01
menge
meins
netpr
peinh
banfn
bnfpo
mtart
from ekpo into table it_ekpo
for all entries in it_po
where ebeln = it_po-ebeln and
ebelp = it_po-ebelp and
loekz <> 'L'.
select banfn
bnfpo
matnr
menge
meins
from eban into table it_eban
for all entries in it_po
where banfn = it_po-banfn and
bnfpo = it_po-bnfpo and
loekz <> 'X'.
if it_ekpo[] is not initial.
select ebeln
lifnr
bedat
from ekko into table it_ekko
for all entries in it_ekpo
where ebeln = it_ekpo-ebeln.
select ebeln
ebelp
belnr
bldat
gjahr
buzei
matnr
DMBTR
shkzg
from ekbe into table it_ekbe
for all entries in it_ekpo
where ebeln = it_ekpo-ebeln and
ebelp = it_ekpo-ebelp .
*if it_ekbe-shkzg = 'H'.
**ekbe-dmbtr = ekbe-dmbtr * -1.
**ekbe-menge = ekbe-menge * -1.
*endif.
* select belnr
* gjahr
* ebeln
* ebelp
* from bseg into table it_bseg
* for all entries in it_ekpo
* where ebeln = it_ekpo-ebeln and
* ebelp = it_ekpo-ebelp.
select belnr
gjahr
ebeln
ebelp
matnr
bukrs
from rseg into table it_rseg
for all entries in it_ekpo
where ebeln = it_ekpo-ebeln and
ebelp = it_ekpo-ebelp.
endif.
if it_ekbe[] is not initial.
select mblnr
mjahr
zeile
menge
meins
ebeln
ebelp
matnr
werks
charg
from mseg into table it_mseg
for all entries in it_ekbe
where mblnr = it_ekbe-belnr and
mjahr = it_ekbe-gjahr and
zeile = it_ekbe-buzei and
bwart = '101'.
endif.
if it_rseg[] is not initial.
select belnr
gjahr
bldat
lifnr
ZUONR
RMWWR
WMWST1
from rbkp into table it_rbkp
for all entries in it_rseg
where belnr = it_rseg-belnr.
endif.
*if it_rseg[] is not initial.
* SELECT bukrs
* belnr
* gjahr
* buzei
* valut
* wrbtr
* augbl
* matnr
* lifnr
* ebeln
* INTO TABLE it_bseg
* FROM bseg
* FOR ALL ENTRIES IN it_rseg
* WHERE bukrs = it_rseg-bukrs and ebeln = it_rseg-ebeln and mwskz = ''.
*endif.
*loop at it_BKPF into wa_BKPF.
* values = wa_rbkp-belnr.
* value1 = wa_rbkp-gjahr.
data: aekey_1 type string .
*CONCATENATE values value1 into aekey_1.
* if it_BSEG[] is not initial.
*MESSAGE aekey_1 type 'I'.
SELECT single belnr xblnr awkey into wa_bkpf
from bkpf
where awkey = aekey_1.
SELECT SINGLe belnr
buzei
dmbtr
budat
shkzg
ebeln
lifnr
FROM bsik
INTO CORRESPONDING FIELDS OF wa_bsik
*FOR ALL ENTRIES IN it_bseg
WHERE
bukrs in s_bukrs and
lifnr = wa_rbkp-lifnr
and
*AND gjahr = it_bseg-gjahr
* AND
belnr = wa_bkpf-belnr.
insert wa_bsik into table it_bsik.
CLEAR wa_bsik.
CLEAR it_bsik.
*endloop.
* and ebeln = it_bseg-ebeln .
* select BELNR
** SHKZG
** DMBTR
* from bkpf into table it_bkpf
* for ALL ENTRIES IN it_rbkp
* where belnr = it_rbkp-belnr.
* ENDif.
IF IT_bseg[] IS NOT INITIAL.
select belnr
LIFNR
ebeln
DMBTR
ZUONR
from bsik into table it_bsik
for all entries in it_bseg
where belnr = it_bseg-belnr.
select belnr
LIFNR
ebeln
DMBTR
ZUONR
from bsak into table it_bsak
for all entries in it_bseg
where belnr = it_bseg-belnr.
ENDIF.
else.
message s002.
leave list-processing.
endif.
endform. " GETDATA
*& Form SETDATA
form setdata .
clear wa_po.
loop at it_po into wa_po.
c_index = sy-tabix.
********Calculate PR Quantity**********
clear wa_eban.
read table it_eban into wa_eban
with key banfn = wa_po-banfn
bnfpo = wa_po-bnfpo.
if sy-subrc eq 0.
move:wa_eban-menge to wa_po-menge,
wa_eban-meins to wa_po-meins.
endif.
********Calculate PO Quantity**********
clear wa_ekpo.
read table it_ekpo into wa_ekpo
with key banfn = wa_po-banfn
bnfpo = wa_po-bnfpo .
if sy-subrc eq 0.
move:wa_ekpo-txz01 to wa_po-txz01,
wa_ekpo-netpr to wa_po-netpr,
wa_ekpo-peinh to wa_po-peinh,
wa_ekpo-mtart to wa_po-mtart,
wa_ekpo-menge to wa_po-menge1,
wa_ekpo-meins to wa_po-meins1.
endif.
********Calculate Balance Quantity******
clear wa_mseg.
loop at it_mseg into wa_mseg
where ebeln = wa_po-ebeln and
ebelp = wa_po-ebelp.
c_grmenge = c_grmenge + wa_mseg-menge.
endloop.
move:wa_mseg-mblnr to wa_po-mblnr,
c_grmenge to wa_po-menge2,
wa_mseg-meins to wa_po-meins2,
wa_mseg-werks to wa_po-werks,
wa_mseg-charg to wa_po-charg.
wa_po-balqty = wa_eban-menge - c_grmenge.
clear : wa_rseg,wa_rbkp.
read table it_rseg into wa_rseg with key
ebeln = wa_mseg-ebeln
ebelp = wa_mseg-ebelp.
read table it_rbkp into wa_rbkp
with key belnr = wa_rseg-belnr
gjahr = wa_rseg-gjahr.
if sy-subrc eq 0.
move : wa_rbkp-belnr to wa_po-belnr,
wa_rbkp-bldat to wa_po-bldat,
wa_rbkp-RMWWR to wa_po-RMWWR,
WA_RBKP-WMWST1 TO WA_PO-WMWST1.
endif.
read table it_bseg into wa_bseg with key
ebeln = wa_rseg-ebeln
bukrs = wa_rseg-bukrs.
if sy-subrc eq 0.
move wa_bseg-belnr to wa_po-belnr_d.
endif.
* read table it_bkpf into wa_bkpf
* with key belnr = wa_ekbe-belnr.
* read table it_bseg into wa_bseg
* with key belnr = wa_bkpf-belnr.
CLEAR wa_bsik.
clear it_bsik.
read table it_bsik into wa_bsik
with key belnr = wa_bkpf-belnr.
* if wa_bsik-shkzg = 'H'.
* wa_bsik-DMBTR = wa_bsik-DMBTR * 1.
* endif.
if sy-subrc eq 0.
move : wa_bsik-belnr to wa_po-belnr,
wa_bsik-DMBTR to wa_po-DMBTR.
endif.
* clear wa_bsik.
* read table it_bsik into wa_bsik
* with key belnr = wa_bseg-belnr.
* if sy-subrc eq 0.
* move : wa_bsik-DMBTR to wa_po-DMBTR.
* endif.
*clear wa_bsak.
* read table it_bsak into wa_bsak
* with key belnr = wa_bseg-belnr.
* if sy-subrc eq 0.
* move : wa_bsak-DMBTR_C to wa_po-DMBTR_C.
* endif.
*clear : wa_rbkp.
*loop at it_bsik into wa_bsik.
*read table it_bsik into wa_bsik with key belnr = wa_rbkp-belnr.
*if sy-subrc eq 0.
* move : wa_bsik-DMBTR to wa_po-DMBTR.
* endif.
*endloop.
*********Assign Vendor,PO Date*********
clear wa_ekko.
read table it_ekko into wa_ekko
with key ebeln = wa_po-ebeln.
if sy-subrc eq 0.
move:wa_ekko-lifnr to wa_po-lifnr,
wa_ekko-bedat to wa_po-bedat.
endif.
*clear wa_ekko.
*read table it_ekko into wa_ekko
*with key lifnr = wa_po-lifnr.
*if sy-subrc eq 0.
* move: wa_bsik-DMBTR to wa_po-DMBTR.
* endif.
* call function 'ZSD_BATCH_CLASSIFICATION_DATA'
* exporting
** ch_charg = wa_po-charg
* ch_matnr = wa_po-matnr
* ch_werks = wa_po-werks
* tables
* cl_data = it_cl_data
** I_SEL_CHARACTERISTIC =
loop at it_cl_data into wa_cl_data.
if wa_cl_data-ausp1 ne '?'.
if wa_cl_data-atnam eq 'THICKNESS'.
move wa_cl_data-ausp1 to wa_po-thick.
elseif wa_cl_data-atnam eq 'LENGTH'.
move wa_cl_data-ausp1 to wa_po-length.
elseif wa_cl_data-atnam eq 'WIDTH'.
move wa_cl_data-ausp1 to wa_po-width.
elseif wa_cl_data-atnam eq 'GRADE'.
move wa_cl_data-ausp1 to wa_po-grade.
endif.
endif.
endloop.
modify it_po from wa_po index c_index.
clear :c_grmenge,wa_po,wa_ekpo,wa_mseg,c_index.
endloop.
endform. " SETDATA
*& Form FIELDCAT
* text
* --> p1 text
* <-- p2 text
form fieldcat .
perform buildfields using '1' 'BANFN' 'IT_PO' 'PR Number' '' ''.
* perform buildfields using '2' 'BNFPO' 'IT_PO' 'PR Item Number' '' ''.
perform buildfields using '2' 'KNTTP' 'IT_PO' 'A/c Assignment Cat' '' ''.
perform buildfields using '2' 'PSTYP' 'IT_PO' 'Item Cat' '' ''.
perform buildfields using '3' 'EKGRP' 'IT_PO' 'Purchase Group' '' ''.
perform buildfields using '4' 'BADAT' 'IT_PO' 'Request Date' '' ''.
perform buildfields using '5' 'MENGE' 'IT_PO' 'PR Quantity' 'X' ''.
perform buildfields using '6' 'MEINS' 'IT_PO' 'PR Unit' '' ''.
perform buildfields using '7' 'LIFNR' 'IT_PO' 'Vendor Number' '' ''.
perform buildfields using '8' 'EBELN' 'IT_PO' 'Purchasing Doc No' '' '' .
perform buildfields using '9' 'BEDAT' 'IT_PO' 'PO Date' '' ''.
perform buildfields using '10' 'MTART' 'IT_PO' 'Material Type' '' ''.
perform buildfields using '11' 'MATKL' 'IT_PO' 'Material Group' '' ''.
perform buildfields using '12' 'MATNR' 'IT_PO' 'Material Number' '' ''.
perform buildfields using '13' 'TXZ01' 'IT_PO' 'Material Desc' '' ''.
perform buildfields using '18' 'MENGE1' 'IT_PO' 'PO Quantity' 'X' ''.
perform buildfields using '19' 'MEINS' 'IT_PO' 'PO Unit' '' ''.
perform buildfields using '20' 'NETPR' 'IT_PO' 'Net Price' '' ''.
perform buildfields using '21' 'PEINH' 'IT_PO' 'Price Unit' '' ''.
perform buildfields using '22' 'MBLNR' 'IT_PO' 'GR Number' '' ''.
perform buildfields using '23' 'MENGE2' 'IT_PO' 'GR Quantity' 'X' ''.
perform buildfields using '24' 'MEINS2' 'IT_PO' 'GR Unit' '' ''.
perform buildfields using '25' 'BELNR' 'IT_PO' 'Invoice doc. number' '' ''.
perform buildfields using '26' 'BLDAT' 'IT_PO' 'Invoice Date' '' ''.
* perform buildfields using '26' 'BELNR_D' 'IT_POP' 'A/C Doc. No.' '' ''.
* perform buildfields using '26' 'AUGBL' 'IT_PO' 'Clearing Doc No.' '' ''.
perform buildfields using '26' 'DMBTR' 'IT_PO' 'OPEN AMOUNT' '' ''.
perform buildfields using '26' 'DMBTR' 'IT_PO' 'clear AMOUNT' '' ''.
* perform buildfields using '26' 'DMBTR_C' 'IT_PO' 'Clear balance' '' ''.
if ch_bal = 'X'.
perform buildfields using '27' 'BALQTY' 'IT_PO' 'Balance Quantity'
'X' ''.
endif.
perform buildfields using '26' 'WMWST1' 'IT_PO' 'TOTAL TAX ADDED' 'X' ''.
perform buildfields using '26' 'RMWWR' 'IT_PO' 'TOTAL AMOUNT IN INVOICE' 'X' ''.
endform. " FIELDCAT
*& Form BUILDFIELDS
* text
* -->P_0449 text
* -->P_0450 text
* -->P_0451 text
* -->P_0452 text
form buildfields using value(p_col_pos) like sy-cucol
value(p_fldname) type slis_fieldname
value(p_tabname) type slis_tabname
value(p_reptext) like dd03p-reptext
value(p_do_sum) type char1
value(hotspot) type char1.
wa_fcat-col_pos = p_col_pos.
wa_fcat-fieldname = p_fldname.
wa_fcat-tabname = p_tabname.
wa_fcat-reptext_ddic = p_reptext.
wa_fcat-do_sum = p_do_sum.
wa_fcat-hotspot = hotspot.
append wa_fcat to it_fcat.
clear wa_fcat.
endform. " BUILDFIELDS
*& Form DISPLAY
form display .
clear wa_layout.
wa_layout-zebra = 'X'.
wa_layout-colwidth_optimize = 'X'.
* wa_layout-box_fieldname = 'SEL'.
* wa_layout-edit = 'X'.
perform build_sort using 'BANFN' '1' 'X'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = sy-cprog
* I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND '
i_callback_top_of_page = 'TOP_OF_PAGE'
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
i_background_id = 'ALV_BACKGROUND'
* I_GRID_TITLE =
* I_GRID_SETTINGS =
is_layout = wa_layout
it_fieldcat = it_fcat
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
it_sort = it_sort
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
I_SAVE = 'A'
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = it_po[]
exceptions
program_error = 1
others = 2
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " DISPLAY
*& Form top_of_page
* text
form top_of_page. "#EC *
**********Create report header*********
refresh it_lshead.
clear wa_lshead.
**********To display date in header*********
* write: s_badat-low to c_low dd/mm/yyyy,s_badat-high to c_high
* dd/mm/yyyy.
* if s_badat-high is initial.
* concatenate 'Dated on' c_low into c_date separated by space.
* else.
* concatenate 'Dated between' c_low 'and' c_high into c_date separated
* by space.
* endif.
wa_lshead-typ = 'H'.
wa_lshead-info = 'PR To Payment History'.
* 'Pending Indents History -We had a requirement to retrieve "aging of receiveables" by customer. Basically, it goes thru each record and depending on the due date places the amounts in the following buckets (example). 0-30 day Overdue, 31-60 days Overdue, 61-90 days overdue, 30+ days overdue, 60+ days overdue) etc all the way to 6+ years overdue.
There are also cooresponding buckets for coming due analysis. For example, what is: 0-30 days coming due, 31-60 days coming due, 30+ days coming due, etc...
To do this, first I needed to be able be able to produce an open items statement at any given time in the past. Now, this seems impossible because of how the items go from open to cleared all the time. And an item that was open one month ago, may not be open anymore.
What I did was first remove any selections on item status. Then compare the posting date with teh key date in the past, if the posting date is less than or equal to the key date, keep the record.
Then compare the clearing date with the key date. First, keep all that are #. (This keeps all records still open from that posting date/key date)
Then, add another check for all items that were cleared after the key date (GT Key Date). This gives you the open items on that date.
Hope that makes sense. Let me know if you want clarification.
/smw -
I bought a pdf book last year and had no problem reading it for a few months then all of a sudden I could no longer open it and to this day. Any other pdf download off internet I can still open and read, except for that particular book. Operating system is Windows 7 Home Premium, Adobe Reader XI 11.0.07. When trying to open file I get msg "You did'nt login or your session has expired. Please log in to read this document for the first time". (Like I said I have read it before). So I log in but that prompts me to give the name of the file I want to export or convert to Word or something else, which is not what I want to do of course. I have not purchased any service from Adobe or Acrobat as I only need to read. Thanks for your help..
Thank you for your reply. Operating system is Windows 7 Home Premium, Adobe Reader XI 11.0.07. When trying to open file I get msg "You did'nt login or your session has expired. Please log in to read this document for the first time". (Like I said I have read it before). So I log in but that prompts me to give the name of the file I want to export or convert to Word or something else, which is not what I want to do of course. I have not purchased any service from Adobe or Acrobat as I only need to read. Thanks for your help.
-
PR already ordered in full message when it is still open
When converting a PR to PO, it is showing an error message that, the PR is already ordered in full. but it is for sure that, the PR is still open.
Can anyone give a soultion for this.Dear,
Please check below detail.
1) Enter T-code ME53N, enter your purchase requisition number.
Go to item level, "Status".
Is it any purchase order prepaid with referance of purchase requisition.
2) Check quantity of purchase requisition.
3) Check status of purchase requisition from,
Status Tab, Quantity/Dates Tab,
Regards,
Mahesh -
Purhcase order is archived and reservatins are still open in RESB table
Hi Experts,
The purchase order has been archived and reservations to this order is still open in table RESB - KZEAR. There is no reservations display in MD04. The mateial is in subcontracting scenario.
We can clear this reservation technically by updating the table in pre-production. But the problem arised in production environment. We cannot do any technical changes.
My question is: How can we clear these reservations functionally??
Pl give your valueable suggestions.
Best answers will be rewarded.
Regards,
Surya.Hi
The final issue indicator in RESB table is shown as blank. If we select 'x' Indicates that a reservation item is completed.
How can we get functionally the indictor is to be 'x' as the PO is archived?
Thanks & Regards,
Surya -
Report with open Purchase orders and open Goods Receipt (without invoices)
Dear All,
We require a report in purchasing which will show:
1. open purchase orders
2. open goods receipts
We do not want POs and GRs that have been created into invoices to be included in the report.
At the moment we tried ME2N with RECHNUNG in selection parameters but it includes invoices. We have tried other selection parameters and reports but the results are not helpful.
I have also checked SDN but there is no correct answer. Most of them specify the ME2N with RECHNUNG as a solution but this does not work for us.
Any help would be appreciated.
G.Hi,
Try ME2N, Select WE101....Also Select ALV
go to next screen....Go to change layout
Select to be deliverd(Qty) and Value, also to be invoice(Qty) & Value.
Hope Help U!
Regards,
Pardeep Malik -
ive changed my security questions but when I try to make a purchase it still asks me to enter my old questions.. Why is that ?
The new questions show on your account on http://appleid.apple.com ? If they do then try logging out and back into your account on your phone (assuming that is where you are trying to purchase from) and see if the new questions then show on it.
-
Hi I do not want iTunes to open up automatically when I turn on my macbook pro. I tried going to System Preferences>Users and Groups>Login Items and then I took iTunes off the list but it still opens up automatically when I turn on my laptop. What should I do?
Hi r,
Make sure you close iTunes before shutdown. And you're quite welcome. -
Purchase Order Items open vs ME2M discrepancy
First posting so if this is not the right section please move this topic. Was the closest I could come to correct forum placement.
Hello all, I am in the process of setting up BPM to monitor u201CN* of Purchase Order Items openu201D from various plant locations and I am noticing the number BPM gives is different than what the system you give if I used ME2M.
For example: I am setting up BPM to monitor Number of Purchase Order Items Open for plant location 2102. The set up is scarce and I only have a few fields filled out in the set-up:
-Document Type u2013 Single Value u2013 NB, UB, FO, ZPC, ZGR
-Plant (Item) u2013 2102
-Doc. Category u2013 F (Purchase Order)
-All of fields are left blank
When this runs I will get an example of 1487 (it changes on an hourly basis so I canu2019t give a static value).
When I try to verify this number using ME2M I get a value of 1237. A difference of 250.
The configuration I am using for ME2M is as follows:
-Plant u2013 2102
-Scope of List u2013 ALLES
-Selection Parameters u2013 WE101
-Document Type - NB, UB, FO, ZPC, ZGR
-All other fields at left blank
Any reason for this discrepancy? The closest I can guess is SAP is pulling in some additional information OR my configuration is incorrect. Anybody run into this issue that has some tips?
Thank you
-nicI know that ME2M has nothing to due to with BPM.
I am confused as to why when I set up BPM, in Solution Manager, to monitor Purchase Orders that are open I am getting a different number than when I use the transaction ME2M in SAP ECC.
For example:
When the process runs in Solution Manager I get back 1425 open POs
When I go into SAP ECC and use the transaction ME2M it will only pull up 1175 open POs
Somewhere along the lines I am missing or adding 250 POs. The current setup (listed above; not sure if BPM is configured the same for everyone) is listed above.
I have tried various set-up options in both BPM Solution Manager and SAP ECC (ME2M) but can't seem to find where these additional numbers are coming from.
Thank you
-nic -
Mozilla keeps telling me to download its newest version. So I go to do it. I save the file, click on run, then the Mozilla downloading wizard comes up. I keep on clicking "Next" until the it gives me the option of downloading with common settings or customizing my own settings. I click next and then it checks my existing installation. It tells me to close Mozilla. That's all it says. Close Mozilla. So I do. Then I click next again, it checks my installation again, then says I must close Mozilla. After I closed it. I suspect there's an add-on or a widget that is still open, I don't how to check what's still open. And if that's not the problem, then what is?!
Hi there,
You may want to take a look at the troubleshooting steps found in the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W. -
the js function to window.open() is in pageAA on a tab.
We click the form or link to open the popup to run a video.
We have a close button on the popup window.
When that is clicked the window.close() js is executed on that page leaving Zotero present and the popup still open.
We've tried using close() window.close() name.window.close() and
all fail the same way.
Short of disabling Zotero is there a way to close the popup in FF and any other addons with one shot?Thank's but still no fix.
In safe mode everything works.
Without Zotero - everything works.
When the popup is loaded with Zotero, the tab shows a constant "Loading" with the circular in process icon.
The Zotero icon shows to the left of the tab.
If I right click on Zotero and close it, the close() js works properly
Is there a way to do a window.open() with:
A. no tabs -or-
B. block all add on's -or-
C. to kill an add on
before doing the close()? -
Delivery document is still open even already invoiced
Good day! Could anyone help me on this?
Here is the scenario:
A new delivery document was created based in sales order. The delivery undergoes to approval procedure and then approved.
Upon posting of the delivery doc and after past few days, sales return was requested. So, sales return was processed and successfully posted based in that delivery doc, but later that day another sales return was requested and did same procedure (successful).
Two sales return was created based in that delivery doc and both SR were 'closed' while the delivery doc is still open, now to close that DR an invoice doc is required. Invoice was made base again in that DR and successfully posted. Expectedly, the DR should close but apparently it doesn't close. Why is that? Or did I miss something that would close that DR?
Thanks in advance!Hi Nagesh,
Yes your right, all marketing docs undergone with approval procedure are all saved as Draft until it was approved by the approver and then posted by the originator and that is the only time DR or any marketing docs should be called as official/posted transaction.
Going back to my scenario, what I mentioned was approved and posted meaning the transaction was officially saved and undergone with the normal module flow SO->DR->SR->SI.
And my concern was focused on why DR is still open even already invoiced.
Correct me if I'm wrong, DR will still remain 'Open' only if the item total qty was not yet invoiced. For example:
DR1 QTY Amount
Item 1 10 100
SI
Item 1 8 80
Thanks,
Rhod
Maybe you are looking for
-
Tried to update Mac book pro to maverick now system will not boot
I downloaded the maverick update but something happened during the update and now my Mac book pro will not boot into the os. What should I do?
-
UI Dynamic Tabs Shell - Child Taskflow not rendering / instantiated
Hi All, I have had this problem, ever since rebuilding my application using Jdev 11.1.2, although I am not convinced this is a problem with Jdveloper verison. Basically, I have developed the UI to open new task flows as dynamic tabs, making use of th
-
N97 Symbian application when i am deploying in mobile i am getting error that "invalid jar file" .If anyone knows the answer reply me........ Note: N97 Symbian application when deploying in mobile through jad and jar files,when jad file is executed i
-
I'm using a FlexRIO 7966R for digital signal manipulation and need to buffer data across clock domains. By buffer I mean I need to be able to store in memory a variable amount of data before it's read back out in order to achieve a data delay. I can
-
How to open swatch libraries on startup?
I'd like my company color palette to be present when I create a new document. I've tried saving the a color group as .ase but when I try and open my user defined swatch library, it's not clickable. That's a workaround for what I want anyway. It seems