Purchase requisitation in order
hi all,
i want to raise purchase requisation number in my sale order what setting i need
kindly give suggession very urgently
regards
madhu
Hi Madhu,
The purchase requisition can be created automatically in the sales document and the control parameters are available in the Schedule Line Category. In [VOV6] Order Type, Item Category and Acct. Assignment Category are the fields that control it.
The item category TAS and schedule line category CS are the standard config provided by SAP to create a purchase requisition automatically in an order.
Regards
Nadarajah Pratheb
Similar Messages
-
Purchase Requisition for Order BOM components ?
Dear Members :
Can I generate purchase requisition for Order BOM components from VA01 ? Mine is TAQ - the header itm cat and TAE for sub-items (finished prod) . While navigating within Sales Order and branching to a particular component's shced. line - the pruch req col is blank. The schedule line cat for the sub-item is CT.
Could someone please explain the configuration steps I need to maintain for the above ? What I am expecting is when I save the Sales Order it should create Purch Req for the components which do not have enough stock.
Thanks
AtanuHi :
Thanks for your advice. Couple of things :
1. In my system in auto acc assignment, I already have consumption acc under posting key GBB. Now I am getting error in VA01 - which states that "The system was not able to determn a consumption acc for purchase order item with acc assignment" and also suggesting to address "GBB posting key". I made the following changes for CT :
movt : 101
order type : NB
item cat : 0
acc assignment cat : F/C
2. Obviously SAP is expecting a consumption GL acc, which though is there under GBB-AUF from my existing setup. For generating purch req this is strange becoz I haven't yet gone upto PO generation step nor released the supposed to be Purch Req. for BOM component - and this is before I save the Sales Order .
3. In spro->acc grouping for mov type; I don't see the following combination in SAP ie,
101(MvT) - B (MvT) - GBB (TEKey) - AUF. I need B instead of F which is already there and is for production order but the BOM comp has to be for PO but the combination is not there.
Do you think this could be the reason that SAP couldn't find the GL acc ?
4. Also my purpose was not just to raise a purch req every time the sales order is created for the BOM components - only if there is shortage in stock - but then again for CT once I assign the above, it doesn't allow to check the boxes like Availbility , Requrmnt etc. (??)
Am I clear and could you please suggest me what I am missing or doing wrong ? What movement type do you siggest to enter in CT fields.
Thanks so much for your time.
Atanu -
Purchase Requisition & Planned Order link to sales order
Dear Gurus,
please help me to find the link between
- sales order item
and
- ( purchase requisition & Planned orders for semi-finished )
that created from running the MRP.
dispite we can see all these data in one screen
in TCode (MD4C) or (MD09)
thnak you .
Edited by: Alvaro Tejada Galindo on Feb 5, 2008 10:50 AMHi,
For third party order, either you can create the material master with item category group as BANS, so the system will automatically pick TAS in the sales order for the material or you can change the item category manually to TAS in the order.
This will trigger a PR, based on the PR a PO will be generated.
Defining Item Category Group
IMG ® Sales and Distribution ® Sales ® Sales Documents ® Sales Document Item ® Define Item category groups
Defining Item CategorySales and Distribution ® Sales ® Sales Documents ® Sales Document Item ® Define Item Categories
Item category TAS
Description 3rd party with SN CM
Item type Blank
Completion rule Blank
Special stock Blank
Relevant for billing B
Billing plan type Blank
Billing block Blank
Pricing X
Statistical value Blank
Revenue recognition Blank
Delimit. start date Blank
Business data item X
Sched. line allowed X
Item relev. for delivery Blank
Returns Blank
Weight/Vol.- relevant X
Credit active X
Determine cost X
Aut. batch determ. Blank
Rounding permitted Blank
Order qty = 1 Blank
Incomplete proced. 28
PartnerDetermProced T
TextDetermProcedure 01
Item cat. status group 1
Screen seq. group N
Status profile Blank
Create PO autom. Blank
Config. strategy Blank
Mat. variant action Blank
ATP material variant Blank
Structure scope Blank
Application Blank
Value contract material Blank
Contract release ctrl Blank
Repair procedure Blank
Billing form Blank
DIP profile Blank
Assigning Item Category
IMG Sales and Distribution Sales Sales Documents Sales Document Item Assign Item categories
Creating Material
MM01
1. On the screen Create Material (Initial Screen) enter the material number if External.
2. Choose Select View(s). (Basic View 1&2, Sales Views, Purchasing views and accounting views).
3. Enter the relevant data and save the material. Use material group BANS in the item material group field.
Creating SD Pricing Conditions for material
VK11
Creating Vendor Master
XK01
Regards -
Planned orders to Purchase Requisitions and orders
Hi,
Just wondering if this is possible. I heard this from a client and want to confirm if it's true.
The client owns the technology and has contractors manufacture the product.
A planned order is generated by the client and based on the type of contractor, some of them are converted to Purchase orders and others to Purchase requisitions.
Is this possible? I was thinking, planned orders ans purchase requisitions are completely different entities. Planned orders are for internal manufacturing which are subsequently changed to Production orders and purchase requisitions are for external procurement that would be converted to Purchase orders.
But converting the Planned orders to Purchase Requisitions and orders is what I could not digest.
Is there any possibility of this case?
Thanks.Hi,
We can create planned orders & convert them into purchase requisition or into production order.
In the material master ,mrp2 view give the procurment type as 'X', for both internal & external procurement.
Also include purchasing view for this material.
When you run mrp using md02, a planned order will be created for the rquirement (Eg:say 100 nos given using t.code md61).
Use t.code md04 to view the stock/requirement list.
Here double click the planned order, you can see tabs such as convert into purchase requisition, into production order, into process order.
Click convert into pur req & enter 50 Nos. Then a pur req will be created which can be further converted into pur order.
Again come to md04 screen.
You can see a planned order & pur req for 50 nos.
This planned order can be converted into production order & 50 nos can be produced internally.
Hope this clears your doubt.
Regards,
Senthilkumar SD -
Purchase Requisition & Production Order
Hi all,
in my system, MRP create automatically Purchase Requisition.
I would like to know if it is possible to connect Purchase Requisition to number of Purchase Order that have generated MRP requirement.
For instance, in Transaction Me57, i have a list of Purchare Requisition that can be converted in Purchase Order (Assign & Process Purchase Requisition).
Can i see in it the Production Order that have generated them???
Or in another transaction?
The purchasing office have the need to see which Purchase Requisition are from Production order 1 and which for Production order 2.. and so on..
Thanks a lot
Best regards
AlbaHI...
go to COOIs,
Give the plant.. and execute.. In the resulting screen of production order, Go to change layout and include Purchase requisition in the list..
This will feed your requirement..
karthick -
Field WEMPF (recipient) in Purchase Requisition and Order
Dear All,
I noticed that the text in field WEMPF (recipient) in Purchase Requsition is not copied over when the PO is created from this Purchase Requisition. Also this field is not open for editiing in the PO. I'm not sure this is a standard setup? Any reason ?
Do you know of what I need to configuration to make sure that the value of field WEMPF in the Purchase Requisition is copy over to the Purchase Order.How to I open the field for editing in Purchase order?
ThanksThere is a OSS Note 118008 - MM-SRV: Goods recipient and unloading point missing
explaining:
You cannot display fields 'Unloading Point' and/or 'Goods Recipient' in the R/3 system. The reason for this is that every account assignment object for each service specification can have several unloading points and/or goods recipients.
In particular, only one cumulation for each account assignment object is possible and useful at purchase order item level.
As of Release 4.0, user fields are available in external services management.
You can name these user fields, for example, 'Unloading Point' and 'Goods Recipient'.
A user field belongs to the service line and is purely informative. -
Reservation Relevance/Generation of Purchase Requisition inproduction order
hi,
i want know in prodution order ,component overview "Reservation Relevance/Generation of Purchase Requisition"that is 1=never.2=from releas.3=immediately,where is these setting occures that is refelect,
in ordertype depened paramete if if i set"Reservation Relevance/Generation of Purchase Requisition"=2when creaeteproduction orer manually it is display=2 in component overview and in headercontrl tab is also,but when we create production rom mrp run or manually plaaned creation through,when conver production order it is dispaly "Reservation Relevance/Generation of Purchase Requisition".plz any one tell how it is come .if we want here 2 then how it is come 2.
T&RHi,
Check TCode OPL8 - Order type parameters
give plant ans order type then goto planning - purchase requitions field should be 3 (select 3)
it will solve your problem
Regards,
Sankaran -
Purchase Requisitions, Purchase Orders and Receipts
Hello all,
The following is the sequence for Purchasing
Purchase Requision -> Purchase Orders -> Receipts
However I have a requirement to bring in the related Purchase requisions,purchase orders and receipts from 11i into R12 instance.I can do that using the open interfaces.However How do i link these 3 objects together?
I intend to import the purchase orders first and then import its related purchase requistions and the receipts...In doing so how do i link them together.How do i know that this purchase order was created from this Purchase requistion or this receipt is meant for this purchase order? What is the joiing columns in the base/open interface tables?
Thanks
AJMHi Venkat
1. To perform ATP do we need all the issues(Sales Orders, Deliveries) and receipts(Purchase Requisitions, Planned Orders) in APO?
Yes you need all the mentioned elements above in APO to do ATP check. Again, you can also extend the scope of the check to further more receipts and issues. All depends on your configuration of scope of check.
3. I guess in Apo the planned order and process order is a single elment. Is that Correct?
Yes, technically a planned order can be a planned process order or a planned production order.
regards
Mohan Chunchu -
Budgeting through Internal Order - Issues in Purchase Requisition
Hi All,
I have posted the issue in ERP Matyerial Management Forum also, but since this has a lot to do with CO-Internal Order, so posting the same here.
Objective: We want to activate Commitment Update and budgeting for Capital purchases thrugh Internal Order. Budgeting is done for IO.
For the budgeting to get activated in Purchase requisition, Internal Order tagged to the Asset should be present/seen in the PR.
For PR with Account assignment Cat as 'A', I am not able to see the Internal order (mapped to the asset) in PR. The field 'Internal Order' in PR is coming BLANK despite the fact that the Asset used in the PR has been tagged to a valid Internal Order (of the Object Class - Investment, with Commitment update activated).
What other setting is missing?
Pls note the following:
1) Account assignment cat 'A' has been set to DISPLAY CO/PP order ( T code - OME9)
Issue is that this field in the PR is NOT getting populated at all.
2) Commitment management, Availability Control have also been activated in the system
. Internal Order status management has also been checked.
Any help in this respect will be highly appreciated
Thanks
GayathriHi Gayatri,
when you are saying"budgeting for Capital purchases thrugh Internal Order",how do you use account assignment category "A"?
if your requirement is budgeting for capital purchases through IO then you should use account assignment category in respective PR.Automatically it will control budget/commitment wrt those internal orders.
Hope this helps you.
Ashok -
Planned orders to Purchase Requisitions and Purchase Orders
Hi,
Just wondering if this is possible. I heard this from a client and want to confirm if it's true.
The client owns the technology and has contractors manufacture the product.
A planned order is generated by the client and based on the type of contractor, some of them are converted to Purchase orders and others to Purchase requisitions.
Is this possible? I was thinking, planned orders ans purchase requisitions are completely different entities. Planned orders are for internal manufacturing which are subsequently changed to Production orders and purchase requisitions are for external procurement that would be converted to Purchase orders.
But converting the Planned orders to Purchase Requisitions and orders is what I could not digest.
Is there any possibility of this case?
Thanks.Hi,
We can create planned orders & convert them into purchase requisition or into production order.
In the material master ,mrp2 view give the procurment type as 'X', for both internal & external procurement.
Also include purchasing view for this material.
When you run mrp using md02, a planned order will be created for the rquirement (Eg:say 100 nos given using t.code md61).
Use t.code md04 to view the stock/requirement list.
Here double click the planned order, you can see tabs such as convert into purchase requisition, into production order, into process order.
Click convert into pur req & enter 50 Nos. Then a pur req will be created which can be further converted into pur order.
Again come to md04 screen.
You can see a planned order & pur req for 50 nos.
This planned order can be converted into production order & 50 nos can be produced internally.
Hope this clears your doubt.
Regards,
Senthilkumar SD -
Click a line in query created from SQ01 - Purchase requisition.
Hi all,
my problem is: Tcode SQ01, i've created a query where query's fields are:
purchase order,
purchase requisition,
maintenance order.
In change query phase, menu Goto --> Report assignment
i've choosed two standard Tcode:
IW32
ME53N
so that when i click a line of my query and chose iw32 i really can change the order clicked on my query but when i choose ME53n i can only display the last purchase requisition displayed e not that I really clicked on my query!
So, how can i display the purchase requisition clicked on my query?
Are there someone help me?
Thanks a lots,
Alex.Hi Phyllis,
I face the same problem that Alessandro and I've changed the report assignment to the old transaction ME53. Unfortunately, when I click in the purchase requisition the new ME53N is called instead of ME53.
Do you have any idea why is this happening?
Thanks in advance for any help.
Regards,
Sara -
How to indentify Quotation linked to Purchase Requisition?
Hi Colleagues,
I need very much to figure out how to identify Quotations linked to Purchase Requisition in order to develop BW extractor.
Using t. code ME53N the "Status" tab shows the Quotations (field "Purch. Doc.") linked to PR line.
The structure MMREQ_HISTORY gets this information. I'd like to know if there is any Transparent Table that I can get this data?
Best Regards
Waldemar Gonsales
EMBRAERHi
Thanks for help.
We have solved such question.
There is a view M_MEKKE. We inform the PR/Item and get the Quotation/Items
It's also possible inform the PR/Item using the table EKET and get the Quotation/Items
Regards
Waldemar Gonsales
EMBRAER
Edited by: Waldemar Gonsales on Sep 9, 2009 6:15 PM -
Purchase Order and Purchase Requisition
Hi To All,
my customer while using tcode me2m hase extracted purchase order opened since 2007. now he want to close all this order and settle them to zero. this operation should be done also for the purchase requisition.
there is a standard way to do this? if not any idea?
thanks
C.Hello
Just by doing
In the PO line item level details, activate DELIVERY COMPLETED check box.
system will not close po from GR
U will have to check what is the gr qty did till date
and update the po with the same qty manually
eq
if po qty is 50 and total gr done till date is 40
change the PO qty to 40 and save
this is the way u can shot close the po
Which effects has the "delivery completed" indicator?
The purchase order item is considered closed, even though the total quantity may not have been delivered.
Although a further delivery is not expected, it is still possible.
At the time of the next goods receipt, the system suggests the item as unselected.
The purchase order item can be deleted, even if the total quantity was not delivered.
Although the "delivery completed" indicator is not set, a purchase order item is still considered closed if the full quantity has been delivered. In this case, the "delivery completed indicator" is not required.
The system allows to make further goods receipts. Why?
Answer
See note 16239 and 856279
hope this helps
Edited by: Umakant Bhangale on Oct 11, 2010 5:20 PM -
Purchase order and purchasing requisition .
Hi
What is the difference between Purchase order and Purchase requisition . ?
And why cube are different for them ?
RegardsA purchase requisition is an internal document that's created to initiate a procurement transaction. The requisition is created to identify the materials that are needed to be acquired and when they're needed. Once completed by the initiator, it's sent to the appropriate approvers.
Upon approvals of the requsition have been provided, and a vendor is selected, a purchase order is created. The purchase order is an external document whereby an agreement is made to procure the materials at an agreed upon price and delivery schedule
The InfoCubes for each of these is different due to the nature of the documents (internal v. external). -
Report for purchase requisition, purchase order and schedulling agreement.
Hi, thanks for your help.
I need a report or query just to view in one screen the related docs. as purchase requisition, purchase order and schedulling agreement.
I don´t know if there is a table or trx. with that information.
Is it possible to get that information via query ?
Thanks for your help.
Regards.For PR and PO you can use ME5A
For PR and Scheduling agreements also you can use ME5A.
Maybe you are looking for
-
Is there any standard report for GR / IR to see as on particular date
Hi , Is there any standard report for GR/ IR to see as on paricular date. please help me. points will be given. regards, Hari priya
-
This has only started happening today and I was using it fine yesterday - have tried 3 different ways to create a PDF (1) using the Acrobat tab on the top ribbon (2) Opening Acrobat and using 'create' - to upload a file (3) using save as a PDF [the A
-
Installing two PCI-MIO-16XE-10 DAQs
I have two PCI-MIO-16XE-10 boards, which work fine independently. I now have put them into the SAME computer, and the Windows XP has successfully found them and installed drivers for them. But when troubleshooting using the NI Measurement&Automation
-
Ios 7.0.2 issue: how to stop running programs
I am a new iPhone5 user and just installed ios 7.0.2 (maybe I should not have but I did). Now I don't know how to stop running programs. Previously I double-clicked the Home button, then saw the icons that represented running programs, then could lig
-
IMovie stabilization feature disabled
I have imported my 1080p 24fps video and I don't have the option to analyze it for image stablization. I have attached a screen shot and you can see the image stablization featured is greyed out. Also there is no option to run analyze on an event f