Purchase requisitio is greater than DependReq qty

hi guru's
I have pir for 200 at fert level for which halb DependReq is also 200 where as purchase requisition is generated less than requirement ie., 174. can any body help me in this

Hi,
First of all, the title of your thread contradicts the facts you are writing.
1. Please run MRP (MD01, MD02, MD03).
2. Run MD04 (again if it is open) and check the result and check your planning situation as well. If your stock level differs from 0 and / or you have open PO item for your material, MRP won't creat exactly PR of 200 pcs for your DepReq.
Please describe your settings, situation better.
Csaba
Edited by: Csaba Szommer on Aug 28, 2008 7:32 AM

Similar Messages

  • GR Qty greater than Confirmed Qty

    Hi All,
    We have created Purchase order with Internal order as account assignment. When ever we are doing MIGO, System is giving the error " GR Qty greater than Confirmed Qty".
    Please help.
    Thanks
    Subrato

    >
    Subrato Chowdhury wrote:
    > The MIGO is happening whenever we are deattaching the internal order. The PO Quantity is same MIGO Quantity.
    Can you expalin more this line whenever we are deattaching the internal order ?

  • How to block Invoice when qty of Invoice is greater than PO Qty

    Hi
    We want to block the Invoice when Invoice qty is greater than PO qty.Is there any way to block the invoice ?

    prashant shinde wrote:
    Hi
    >
    > We want to block the Invoice when Invoice qty is greater than PO qty.Is there any way to block the invoice ?
    Hi,
    You can deal with this situation in 2 ways. Manually block the invoice while posting, TAB: Payment.
    Else,
    Use Quantity Variance Key: DQ,DW. You can enter tolerances for Lower and Upper Limit. You can enter absolute and percentage base variance. If one of the limit is exceeded the invoice is blocked for payment.
    If you want certain variance is always blocked, set value or percentage for the upper limit to ZERO and select Check Limit.
    IMG->Material Management->logistics Invoice Verification->Invoice Block->Set Tolerance Limits (Transaction Code: OMR6).
    These setting are for Co. Code level.
    Any deviation from ordered Quantity will be blocked.
    Hope this is what you are looking for!!
    Reetesh
    Edited by: Reetesh on Nov 22, 2011 7:43 AM

  • A/R Invoice Qty Greater than Delivery Qty

    Hi All,
    Can I post A/R Invoice with the qty greater than the Delivery Qty????
    I came across a case where I have a delivery Document of 10Kgs But Qty changes to 10.5Kgs at the time of A/R Invoice posting.
    Is there any std feature available of we need to do any work around. Pls suggest.
    Cheers,
    Sree.

    Great.......
    Then the way is clear.
    You can manully edit the Qty at AR invoice row level.
    try this in Test DB first whether your effect goes right or not.
    But as per my knowledge it goes perfectly  even if you edit.
    It will increase your stock by 0.5 kg from GRPO stock.......
    Regards,
    Rahul

  • Error in VL01N(Delivery qty is greater than target qty while taking return)

    Hi Experts,
    I am facing a problem "Delivery Quantity is greater than the target quantity" while doing the inbound delivery from VL01N t-code for sales returns with reference to return order.
    I am trying to do the inbound delivery for the same Quantity which is in return order but still it is showing error.
    I have checked my configuration and could not find any mistake under this process. I am not able to identify the error. In my delivery item category we have put "B" under over delivery check which is our business requirement.
    If I remove "B" from delivery item category, i am not getting any error in inbound delivery but which is not right way of doing.
    I could not find suitable query in SDN. Can any one please share your expertise to solve this problem?
    Thanks in advance,
    Regards
    Srinivas

    You have to check the following:-
    a)  whether for that return delivery, picking is not activated
    b)  whether customer master or material master is maintained for over delivery tolerance
    c)  whether in VD51, any overdelivery tolerance is maintained
    You can also have a look at the following notes:-
    1)  Note 151901 - Check of delivery quantity is consistent
    2)  Note 322588 - VLSP:incor.checks for qty to be delvrd during split
    thanks
    G. Lakshmipathi

  • SP to Block GRPO Qty if greater than PO Qty

    Hi all,
    I need to block the GRPO Document when adding it if the Qty in the GRPO is greater than the PO Qty.
    But this Stored Procedure blocks me even when i raise the GRPO with Qty less than the PO Qty.
    IF @transaction_type IN ('A') AND
    (@Object_type = '20')
    BEGIN
    IF EXISTS (SELECT T1.BaseEntry
    FROM dbo.OPDN T0
    INNER JOIN dbo.PDN1 T1 ON T1.DOCENTRY = T0.DocEntry
    INNER JOIN dbo.POR1 T2 ON T2.DOCENTRY = T1.BaseEntry
    WHERE T1.BaseType = '22' AND
    T1.ItemCode = T2.ItemCode AND
    T1.BaseLine = T2.LineNum AND
    T0.DOCENTRY = @list_of_cols_val_tab_del
    GROUP BY T1.BaseEntry
    HAVING SUM(T1.Quantity) > SUM(T2.OpenQty))
    Begin
    SELECT @Error = 10, @error_message = 'GRPO quantity is greater than PO  quantity'
    End
    END
    Is something wrong with this SP...

    Hi
    Check bellow Sp
    --------------- Validation for Goods Receipt PO Restricting Excess Qunatity ----------------------------
    IF @Object_type = '20' and @transaction_type = 'A'
    BEGIN
    declare  @line int
    SELECT @line = (LineNum + 1)
    From PDN1
    Where PDN1.DocEntry = @list_of_cols_val_tab_del
       and (Quantity > BaseOpnQty)
    Order by LineNum
    If (not ISNULL(@line, 0) = 0)
    begin
      Set @error = 10
      Set @error_message = 'Line quantity' + CONVERT(nvarchar(4), @line) +' is more then open quantity !'
    end
    END
    Thanks& Regards
    AndakondaRamudu

  • Commercail invoice qty should not be greater than PO qty.

    Hi,
    We have a requirement where, system should check for the commercial qty with PO qty and if commercial invoice qty exceeds than PO qty, system should give an error. This is required to avoid duplicate payment of customs duties.
    This functionality should work for parking and posting of commercial invoice both.
    Please suggest relevant solution.
    Thanks & Regards,
    Bhargavi.

    Hello,
      You can use the function exit EXIT_SAPMM06E_012 to carry out this validation.
    Thanks,
    Venu

  • Cancel GI is greated than GI qty

    Dear SAPper,
    As i know if we post cancellation planned good issue 262 the system will suggest the qty and stop
    if we cancelled more than we issue because it is documented in reservation.
    But if we use unplanned good issue cancellation the system always proceed no matter if we unplanned cancel more than we issue (even when there is no good issue the system proceed cancellation unplanned 262)
    Can we block this?
    Any ides is very appreciated.
    Thanx.
    Good day.
    Best regards,
    Freddy Ha

    Hi,
    How about restricting the 262 movement for some users and only the responsible person will do the reversal??
    If this can be done in your case, the Authorization Object is M_MSEG_BMB.
    Hope this helps..
    Regards,
    Siva

  • Invoice Qty greater than PO qty

    Hi,
    During invoice verification of customs duties, system is taking excess quantity than, PO quantity. Can anybody suggest, how to avoid this.
    Regards,

    Hi,
    Check the tolerance limit set for the vendor.
    Materials managementLogistics Invoice verificationincoming invoice--configure vendor specific tolerances.You have to the tolerance settings here.
    Regards,
    Nitin Amritkar

  • Component Qty in PO for Subcontracting is greater than available in stock

    Dear Gurus,
    i have an issue regarding Subcontracting. When i create a Purchase Order, i use Item Category L. In the Compoenent i specify the material and the Requirement Quantity. Req Qty which i specify in PO is greater than the Qty available in Stock.
    How do i restrict the user to enter only the Quantity that is available in Stock for the Component provided to the Vendor.
    Thanks,
    Johi.

    the next MRP run will create a requisition or planned order  to get more quantity for the component., if you are short of material.
    do you just plan to produce as much as you have components for, or do you plan to satisfy a customers need?

  • PO greater than Shopping Cart Qty

    Friends,
    We are working on extended classic scenario where PO is created as follow-on document from shopping cart. User can create PO in sourcing cockpit using Process PO option. However here user has the option to change PO qty where system accepts PO qty greater than SC qty. We would like to restrict it.
    In R/3 MM we can control this via system message and restrict PO qty to exceed PR qty.
    How can we control this functionality in SRM?
    Regards,
    Sandeep Parab

    Hi. Try the BBP_DOC_CHECK_BADI.
    You should be able to check the quantities and issue an error if the quantity has been changed.
    Regards,
    Dave.

  • QTY in return order more than billed QTY

    hi
    i am trying to rasie an return order with ref to billing doc and copying the quantity.
    Though the qty is getting copied from ref doc,i am able to increase the qty more than billed.
    the system is through an waring msg ,but allowing me raise the return order with greater qty.
    Same is with subsequent delivery free of charge too,i am able to raise order with this doc type w.r.f to return order and giving greater qty than ref doc.
    it is allowing me to go ahead the finish the sales cycle.
    Can any one guide me how to restirct the system from taking qty if it greater than the qty from the ref doc?
    how and the path in spro please.
    thanks
    shashi

    Dear Mr Chavva,
    Trust the message is as follows:-
    Class :V4 and Number: 229.
    Body of the message is:
    Item &1: Order quantity (&2) greater than billed quantity (&3).
    If so kindly attempt the following:-
    using transaction OVAH kindly locate the message and change its settings from W (warning) to E (error).
    Kindly simulate the transaction, expecting it to fail.
    In case of disappointments, kindly explore a setting the user exit MV45AFZZ disabling saving of the document in case the quantity exceeds reference document quantity.
    Trust the reply is useful.
    Regards,
    K Gopidas.

  • WS Error - Planned Qty should be greater than Completed + Rejected Qty

    Hi All,
    We've tried to close a Production Order using the ProductionOrdersService Web Service.  We're doing this by setting the Production Order Status flag to closed (boposClosed).  The call also requires us to re-set the due date so we do that to the same value.
    When we perform the call we receive the following exception:
    "Planned Qty should be greater than Completed + Rejected Qty  [OWOR.PlannedQty]"
    It's interesting to note that we've tried to close the production order with different items and everything seems to point towards an issue with the items, however, we're not really sure what is triggering the error.  We're also not sure what the error really implies as the Planned Qty is greater than the Completed + the Rejected Qty on the database.
    We're working with SAP 8.8.1.
    The code is as follows:
            // Get the current session ID first
            // Create message header object with value..
            SAPProductionOrdersService::MsgHeader^ localMsgHeader = gcnew SAPProductionOrdersService::MsgHeader();
            localMsgHeader->SessionID = sessionId;
            localMsgHeader->ServiceName = SAPProductionOrdersService::MsgHeaderServiceName::ProductionOrdersService;
            localMsgHeader->ServiceNameSpecified = true;
            SAPProductionOrdersService::ProductionOrdersService ^iprodWs = gcnew SAPProductionOrdersService::ProductionOrdersService();
            iprodWs->MsgHeaderValue = localMsgHeader;
            // Set the item params object
            SAPProductionOrdersService::ProductionOrderParams^ localProductionOrderParams = gcnew SAPProductionOrdersService::ProductionOrderParams();
            localProductionOrderParams->AbsoluteEntry = ProductionOrderNum;
            localProductionOrderParams->AbsoluteEntrySpecified = true;
            // Perform the Item fetch with that information
            SAPProductionOrdersService::ProductionOrder^ localProductionOrder = iprodWs->GetByParams(localProductionOrderParams);
            // Construct a new Production Order Data structure
            SAPProductionOrdersService::ProductionOrder^ newProd = gcnew SAPProductionOrdersService::ProductionOrder();
            // Absolute Entry
            newProd->AbsoluteEntry = ProductionOrderNum;
            newProd->AbsoluteEntrySpecified = true;
            // Production Order Status
            newProd->ProductionOrderStatus = SAPProductionOrdersService::ProductionOrderProductionOrderStatus::boposClosed;
            newProd->ProductionOrderStatusSpecified = true;
            newProd->DueDate = localProductionOrder->DueDate;//     {6/9/2011 0:0:0 System.DateTime}     System::DateTime
            newProd->DueDateSpecified     = localProductionOrder->DueDateSpecified;//     bool
            // Setting lines array back
            newProd->ProductionOrderLines = localProductionOrder->ProductionOrderLines;
            // Item Code
            newProd->ItemNo = ItemNum;
            // Perform the Update of the Production Order with that information
            iprodWs->Update(newProd);
            // Since there is no return type telling us of the recent update, unless we get an exception, assume it worked
            String^ recMsg = "Close Production Order Attempt Successful.  Parameters are: \r\n" +
                             "Production Order Num: " + ProductionOrderNum;
            Log::LogInformation(recMsg);
            retVal = true;
    Hector

    Dear Gordon,
    Yes, I have checked the data in the database.  I've checked tables OWOR fields PlannedQty, CompletedQty and RjctQty and everything seems  to be in order.  I also checked table WOR1 for the production order lines.  There are two lines, one Labor and one Raw Material (regular item).  I've checked BaseQty, PlannedQty and IssuedQty but everything seems in order there as well.
    Do you know if there is a way to find out what internal piece of code throws that exception message?
    Hector

  • How to Create Purchase Order with Co Product greater than Consumption

    Hi All,
    I'm new to SAP. Can any one please help with the steps to create PO with Co Product greater than Consumption.
    Thanks in Advance.    

    Hi Srinivasu,
    If you are talking about handling by-products during subcontracting follow the following steps.
    Create Purchase order with item category "L". In the components tab maintain by-product in negative quantity. If you are not sure about the actual quantity, enter theoretical quantity ( Actual quantity can be adjusted in Subsequent adjustment in Goods receipt).
    Hope this helps you.
    If this has not helped you, please elaborate your requirement.
    Thanks
    Vasuki B S

  • Return delivery qty greater than previously GR-posted qty

    Dear Team,
    We have created GRN with reference to inbound delivery and this is posted to quality stock.
    When we try to cancel this GRN document, system is giving the error "Return delivery qty greater than previously GR-posted qty xxxxxxx (IBD No) VLA 319"
    How to cancel this GRN.
    Thanks & Regards,
    R.Saravanan

    You can find information on the implementation of this error message (VLA319) in OSS note 1050944.
    As for the error your're facing maybe can be solved via the implementation of OSS note 1342935.
    Edited by: Csaba Szommer on Nov 2, 2010 8:49 AM

Maybe you are looking for