Purchase Requisition Error

Hello ,
I am having issues with Purchase requisition.
1) When i am creating a requisition without an account assingment it is allowing me to save the requisition as the requisition is not routed to proper queue for release.So is there any config to make this error while saving the requisition (not allow it to save without account assingment).
2) Once the requisition is created with PR value of 1000 and is released.After few days if we are changing the PR value to 50,000 it is not going to FI queue for release .So question is if a Req is already released and afterwards the values is changes does it requires release again or if we want to change the PR value so we need to add another line ?
Please help me and thank you all .
KL

Dear Kennlynn,
There are 4 changebility you can set for release indicator as below:
1     Cannot be changed
2     Changeable, no new determination of strategy
3     Changeable, new release in case of new strategy
4     Changeable, new release in case of new strat. or val. change
If after final release, then if you set your final release indicator to 1 or 2, then
the release strategy will not be reset.
If after final release, if you have release indicator changeability = 3, then the release
strategy will be redetermined if there are another release strategy met the criteria after
you had increase the total value of the document.
If changeability = 4, then the release will be reset or redetermine once you had increase the
value of the purchasing doc.
Best Regards,
Loke Foong

Similar Messages

Purchase order from Purchase Requisition error no selectable items found

while modifying the Purchase order item quantity, iam getting an error
Tcode me22n.
The order already released. now i want to ( change ) reduce the quantity.
No selectable items exist for Purchase requisition l_banfn.
message no 06053.
can anyone please help me on this.
thanks
rajesh.

Check the status tab in ME53N whether all the qty in PR are already used up
Or
Check the line item in PR whether it is deleted
Edited by: Karthik on Jul 20, 2011 12:37 PM

Facing 'No Approver Found for Purchase Requisition' error when using AME

Hello All,
I am trying to test one simple rule in AME. Below are the the details of the rule.
Rule name - VO Category = SUPPLIES.FACILITIES
Item Class - Header
Rule Type - List Creation
Conditions
1. ITEM_CATEGORY in (SUPPLIES.FACILITIES)
Condition Type - Ordinary
Attribute - ITEM_CATEGORY
Data Type - String
Item Class - Line Item
String Value - SUPPLIES.FACILITIES
2. TRANSACTION_SET_OF_BOOKS_ID is equal to 1
Condition Type - Ordinary
Attribute - TRANSACTION_SET_OF_BOOKS_ID
Data Type - Number
Item Class - Header
Details
TRANSACTION_SET_OF_BOOKS_ID is equal to 1
Actions
Action Type - approval-group chain of authority
Rule Type - Chain of Authority
Order No - 1
Ordering Mode - Serial
Voting Method - Serial
Action - Require approval from Facilities Approver Group
Approver Group Details
Name - Facilities Approver Group
Type - Static
Voting Method - Order Number
There are two member in this approver group
Approver Type Approver Order Number
HR People HR People: akshay7 1
HR People HR People: akshay8 2
Now when i create a requisition with akshay7 as preparer then following notification is displayed
To akshay7
Sent 21-May-2013 16:55:08
ID 4681179
Approval workflow database error occurs while approving Purchase Requisition 14315
Contact your system administrator to identify the problem and to use SQL*Plus or Workflow Monitor to reactivate the approval workflow where it left off.
Give your system administrator the following information:
PL/SQL procedure: POR_AME_REQ_WF_PVT.GET_NEXT_APPROVERS
Error: ORA-20001: The procedure getNextPosition could not find parent position for : HR Positions: 01.Jrbuyer
Both the employees have one supervisor.
How to reslove this error?
Thanks in advance.

Hi Everyone,
The problem is solved now. The cause was that the test requisition that I was making was satisfying more than one rules and hence I end dated the remaining rules which solved the problem.
Thanks!

Account assignement category for purchase requisition - error message

Hi All!
I created a new Item category in service order (IW31) "O" with the account assignment category "O". If I don't set the Consumption posting indicator to V for this category, when I set the account assignment category "O" to the purchase requisition in <i>Plant Maintenance and Customer Service-Maintenance and Service Processing-Maintenance and Service Orders-General Data-Define Account Assignment Category/Document Type for Purchase Requisitions</i>, I receive the message:
<b>"Acct. assign. cat. "O" for purchase req. does not exist.
Message no. CS 075"</b>
The client request is not to charge immediately for the goods receipt with the relevant costs the service order. The client wants to create the goods receipt in a storage location for the plant and then confirm the components and charge the costs after the component confirmation (movement type 261) - similar to stock material.
Any idea about what should I do?
Thank you.

Hi Everyone,
The problem is solved now. The cause was that the test requisition that I was making was satisfying more than one rules and hence I end dated the remaining rules which solved the problem.
Thanks!

Delete/Remove past due Purchase Requisition

Hi Experts,
Delete/Remove past due Purchase Requisition, error message: Plant not generated due to XX05
Regarding the issue deleted Pur Reqs,   I should be the one to delete it. but Pur Reqs, it is still open.
Iu2019ve tried but found that donu2019t have authorize to delete PurReq. And BU already added my name
as key user as attached. Pls help proceed.
There are two help needed. Pls help complete ASAP.
     1)     Remove past due Purchase Requisation
     2)     Plan note generate due to XX05 (error msg)
Could you pls help remove below past due PR?
error message: plant XX05 does not exist.
Plan not generate due to plan is block XX05.
Please help provide solution.
Thanks & Regards,
Bikshu

Hi ,
Thanks for your reply,
There are two help needed. Pls help complete ASAP.
Issue: 1) Remove past due Purchase Requisation
once Remove past due PR. then only given to error message.
         2) Plan note generate due to XX05 (error msg).
Regarding the issue deleted Pur Reqs, I should be the one to delete it. but Pur Reqs, it is still open.
         3) Debugging the ABAP program MD05.
Could you pls help remove below past due PR?
Thanks&Regards,
Bikshu.

Error in creation of purchase requisition

Hello Sap Guru,
When we are trying to create a purchase requisition under t.code ME51N, we are getting error message "enter valuation price"?
If anyone can please explain the reason & solution of this error.
Thanks In advance
Deepak Garg

{code)When we are trying to create a purchase requisition under t.code ME51N, we are getting error message "enter valuation price"?{code)
Hi,
it is sap standard process when you create PR and if material master record exist the price is automatically taken from the valuation price field. if record not exist enter lum sum price of requested material price.
When purchase guy create po with reference to Pr they can change valuation price also.
In custommization for Purchasing under Purchase Requisition -> Define Screen Layout at Document Level, you can set price and price unit. The Valuation price field can be set as a mandatory or optional input field.

Error when creating a purchase requisition in reference to a contract.

Hello All,
My client have a requirement that , He wants to create a purchase requissition with Item catogery-B and account assignment-K
with reference to a contract.
when we are trying to create a purchase requisition with Item catogery-B and account assignment-K
with reference to a contract the system is throwing an error: "Item categories in agreement and requisition incompatible".
I had searched for the relating documents and tried all the conbinations but could not find the solution.
Could any body help in this regard.
thanks in advance.

Hi Gayathri
I thought so. So that means you are unable to create a contract with the combination of K and B which is why you are not able to adopt it in the PR with the same results.
As far as entering the limit goes, you would be making a value contract in which you would have to enter the value of contract that you need to create for vendor. Also, for the second error, once you have created a contract with the particular account assignment, u cannot change it. You would have to create a new contract with the desired account assignment category and then try creating a PR. Hope this helps!

Error While Creating Workflow for Purchase Requisition Rejection

HI Experts,
Purchase Requisition No is not Displaying in the Business Workplace Inbox after my Work flow got triggered.
In Work flow i am Using the Task 97600004 which i copied from the Standard Task 65400032. This Task i called in the Activity Step having Work Item Display Tab. In this Tab while i am checking at Work Item Text for Identification of Work item in work flow inbox level it is Giving Error "Container element '_WI_OBJECT_ID' does not exist and also Insert Expression is in Disable Mode.
In Business Workplace Inbox i am getting message as "Purchase requisition 00000 rejected".
Please Suggest where i am Committing Error.
Thanks in Advance
Srikanth Kumar

HI.
I Have Checked the work flow as suggested Dheepak
In Start Event of Work flow i declared BUS2105 as BOR Object . The Task which i copied contains BUS2009 as default.
As Raj Suggested In Task i have Created a New Element BUS2105 at Container Tab and set binding in task and set the Binding between Work flow and Task. Now it is working fine and i am getting the PR No in the Message of SBWP inbox.
But i Having one more doubt regarding this issue only Why BUS2009 BOR object Type is not working which is the Task as default even though its binding is set between work flow and task?
Thanks Dheepak and Raj for Your Valuable Suggestions. My gmail id is srikanth537. Can u add me In your Friends list.
Thanks
Srikanth Kumar
09937876902
Edited by: Srikanth Kumar Talasu on Dec 23, 2008 11:59 AM

Error while creating a Purchase Requisition T Code ME52N

Dear Freinds,
The users are trying to create the Purchase Requisition, however the system gives the error message that the GL Account xxxxxx cannot be used, as the comparison of the field selection strings are not comparable with the Account Assignment Category E. Message no. is ME045. How could we resolve this?
Thanks for the help.
Regards

Dear,
check the FSG for the GL Account 200010 and go to TCcode OBC4 and check the status of field 'Asset number / subnumber' and then go to TCode OME9 and select A and check the field status for field 'Asset number / subnumber'. Status at both areas are different hence system is not accpting. Make status identical.
Regards,
Sandip

Enter short text error when creating a purchase requisition using ME51

Hello
I would be grateful if someone can help. I am currently trying to raise a purchase req using ME51. The purchase req is for one item so i enter details of this item on line 1. However when i try to save the purchase req i get an error message stating "enter short text" on line 3 and it does not let me continue. Line 3 however does not contain any item information so i dont understand why i am getting this error message.
Another user created the same purchase req and it worked fine for them so i am not sure why i am getting this message.
I would be grateful if you can please help.
Thank you
Regards
Bindi

Syed
I have tried logging off and logging back in and still having this issue.
Jurgen
No im only having this problem in a ME51 creating purchase requisitions and not in a CATT or any batch input recording
Regards
Bindi

Error in WBS element while doing the purchase requisition

Dear All,
While doing the purchase requisition in ps
the error is : Item 010 WBS element IN05-PR09-16 . 04 budget exceeded.
Kindly parovide any solution.
Best Regards,
Venkat.

Hi Venkar,
Check the available budget against WBSE - IN05-PR09-16 . 04 (S_ALR_87013558 - Budget/Actual/Commitment/Rem Plan/Assigned ), and the PR amount. Available Budget should be more than PR amount. Based on the tolerance limits set for the budget profile, maintain the Current Budget with budget updates and try to create a PR accordingly.
Hope this solves your problem !!
Br
Hari.
Edited by: Hari Krishna Kudaravalli on Aug 20, 2009 3:25 PM

Purchase Requisitions Approval Error

Hi,
We are working in Oracle Applications 11i. We have the follwoing modules installed and used: Purchasing, Inventory, HRMS(Payrol), General Ledger, Assets, Payables.
I am trying to fill in the gaps in our initial setup in order to enable the user to use Purchase Requistions documents.
Purchasing Super User wishes to create a Purchase requistion herself and get it approved and then distribute the approved requistions amongst the buyers. Is this possible??? How can we implement this? Can we assign the superuser to aan approval hierarchy of one level?
Also, I have created a multi-level position approval hierarchy , run Fill Employee Hierarchy, and assigned it to the Purchase Requisition document.
Me, in the 1st level have created a Purchase Requistion,I submitted for approval and then had the error:
APP-PO-14142: In Exception of Start_Wf_Process()-PO_REQAPPROVAL_INIT1.Start_WF_Process: In Exception handler: ORA-20002: 3108: Root Process could not be determined for item XXXXX. There may be a problem with item type selector function, or you may be required to supply a starting process Name.
Can someone advise please....
Thank you...

Hi again,
Now please help me in the first part of my post.
How can I setup Purchasing Requisition in one-level hierarchy and approval?
After the Reuisition is approved, in order to control the load balance , how can the super user distribute it to buyers to follow up the standard purchase order and submit it for approval?
Thank you

Workflow error in release Purchase requisition

Hi All,
I configured the settings for workflow in Purchase Requisition.(both purchsing & task specific )
Now, my workflow is started but its status is Error.
actually it is not able to find the recepient in role 20000026.As i already mark relevent release code as 1 & also assign US user id in the PR release settings & also put the User ID in task specific customization.
Still i am facing this error.One thing i want to mention is i am not aware of the settings required in the Edit Qrganizational Plan tab in SPRO.
If some more clarification is required ,i will prode the same..
Plz suggest some solution in this regard with T codes & bit detail.
Thanks & Regards,
Sandeep Sharma

Sandeep,
Okay here's some details which will help you out. I presume that you have done customizing for PR release strategy.
If not then follow this procedure:
http://help.sap.com/saphelp_47x200/helpdata/en/04/92761846f311d189470000e829fbbd/frameset.htm
Once you establish release strategy , event releasestepcreated will automatically created by system based on release codes.
so say for a standard pr type you have defined two release codes I1 and I2 (based on certain amount- you can see this in class characterisitic using tcode CL02) and class type -032 and class PR_RELEASE most probably, check Char. tab).
Once you define char. in CL02, you gotta run tcode CT04, give the name of char. and fill all tab.
inside tab Addl data, you have to define CEKKO table and field too
this is where we have referenced the event releasestepcreated implicitly.
FOR all customizing of release strategy check this link , this is really great blog
http://www.sap123.com/forumdisplay.php?s=cced678eca43fe7a7e3bb9b83dc94022&f=2
then search for "setting up simple release procedure" thread in it.
It is for PR.
So if I1 release take place event will triggered, say A has approved I1 level and for whole PO release I2 is also required then one more time event releasestepcreated event would be triggered.
You can create workflow for PO release. Approver are determined based on rule AC20000026 (check in PFAC) based on FM which has user exit EXIT_SAPLEBNF_001 where you can write down your own code for approver determination.
I think that you gotta put 9 (in release code settting in SPRO). If you are inserting 1 then you have to define US and user name (which I think you have done).
Hope it will clear your doubts
Cheers
Jai

Error code 083 on LSMW - Purchase Requisition creation

Hii all,
I have generated a bapi program for purchase Requisition creation.
the followings are the programe details:
Business Object
BUS2105
Method
CREATEFROMDATA1
Message Type
PREQCR1
Basic Type
PREQCR101
I have divided the structures into 3 sections:HEADER,ITEM DETAIL,ACCOUNT ASSIGNMENT.In the account assignment group at the "Maintain Field Mapping and Conversion Rules" (E1BPMEREQACCOUNT), wbs element field marked as "move".
At the "E1BPMEREQACCOUNTX" the wbs field was mared as "X".
the programm can read the feild & displays the WBS element that it can read from the datafile.
the problem is that during the stage of " Create IDoc Overview"
it provides the following error:
Enter WBS Element
Message no. ME083.
I have checked the WBS element& nothing is wrong with it.
any one can help me out on this?
thanks
M S

Hi Jurgen,
Thanks for replying.
1. For BAPI, at step 14. when i execute, it is a warning message
No Data could be selected
2. yes, I have activated the IDOC Settings.
Please suggest.
Thanks,
Sahil

Error in Bapi : Change Purchase Requisition

Dear All,
We have requirement where we need to update the Purchase Requisition Quanity.
For this purpose, I am using Bapi '/AFS/CHANGE_AFS_PR_DATA'.
In this I want to change Sheduled Qty. (AFS Grid Qty.), but I m getting error like
"Line item 0010 : different quantities in item and schedule line". (Sy-subrc = 3)
Can any one help me out with this.
Thanks in advance.
Regards ,
Vishal.

Hi,
Refer:
* BAPI to change the PR details
    CALL FUNCTION 'BAPI_REQUISITION_CHANGE'
      EXPORTING
        number                = v_banfn            "<--PR Number
      TABLES
        requisition_items_old = it_old_detail      "<--pass in old PR details
        requisition_items_new = it_new_detail      "<--pass in new PR details
        return                = it_return_change. "<--return table
*   "read for error message while changing details for PR
    READ TABLE it_return_change INTO wa_return_change WITH KEY type = 'E'.
    IF sy-subrc = 0.
      "check for ERROR
    ENDIF.
Hope this helps you.
Regards,
Tarun

Purchase Requisition Error

Similar Messages

Maybe you are looking for