Purchase requisition report not showing any data R12.04

when i run "Printed Requisitions Report". Report run without any information.
EBS R12.04

Please refer to Note: 472332.1 - R12: Printed Requisition Report Ends With "No Data Found"
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=472332.1

Similar Messages

Firefighter - SoD Violations Report - not showing any data

We have ECC6 and GRC 5.3 with latest patch. Our RAR is working well also. We recently installed firefighter. All reports are working fine except following two reports,
1: SoD Violations Report
2: Critical Transactions
We want to use RAR critical table and SoD data, therefore In our configuration table we have following paramter set as:
Critical Transaction Table from Compliance Calibrator (VRAT) = YES
Could someone please direct in right direction how to get it fixed. Is there any SAP Note suggesting configuration setup etc.
Thanks in Advance
Masood Akhter

There are a number of settings to be made in order to get this working. The note is helpful but effectively you need the following:
In ECC
TCP/IP RFC Dest created with a unique report name.
This RFC mentioned in the /VIRSA/ZRTCNFG transaction
In RAR
The Report name entered into the RAR connector.
The SAP gateway mentioned in the RAR Connectior.
The RAR connector marked as outbound connection.
The SAP Adapter activated.
In SPM (ECC)
Set the "Connector ID for Risk Analysis" parameter to the name of the RAR Connector in the SPM configuration table.
You may also have to do a Java system Restart if you encounter error messages when activating the SAP adapter in RAR.
Simon

Network Management Reports not showing any data on scom 2012 r2

Hello,
I have imported Windows Server operating system Management Packs and it started monitoring the windows server system and network adapter state showing healthy state for all the adapter attached to Virtual Windows Server 2012 Machine.
but none of data showing on Network Management Reports ,all the other reports are working properly. If Its need to enable some monitor which are disable by default, pl z list what are the monitors how to enable those monitors?
May I first need to Deploy agent particularly on network adapter ?
Regards
RICHA KM

Hi,
I think you could start from here:
Monitoring Networks by Using Operations Manager
http://technet.microsoft.com/en-us/library/hh212935.aspx
System Center Operations Manager 2012: Network Devices with Extended Monitoring Capability
http://www.microsoft.com/en-us/download/details.aspx?id=26831
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

BPMon alert reporting not showing any data for Trend Analysis

Hi,
I have setup BPMon and performed the initial setup for BW reporting. There are alerts being generated by the BPMon setup and the data has been transferred to the 0SM_BPM cube.
But when I start the Trend Analysis report I dont get any Solution for selection to generate the trend analysis chart.
I have followed all the steps mentioned in the setup guide. Please suggest any remedy.
Regards,
Vishal

Hi ,
If your query is on multiprovider , then makesure to check there are no restrictions/filters on cubes.
Also inlcude any keyfigure from the cube,where other characteristics are being assigned from or where u r seeing data, in the query.
If you dont want to see the Keyfigure, u can hide it using keyfigure display properties in the query designer.
Hope this helps,
Aparna Duvvuri

Team calendar My trainings not showing any DATA on Production Server

Dear ALL,
We are facing very critical issue on Production Server.
We have two Id's for which Team calendar, My trainings is not showing any DATA .
We observed that this is happening to both the users who had MSS role previously..
now for your information we have check the following things already .
1. RFC PT_ARQ_TEAMCALE_GET is showing DATA correctly .
2. The authorization. Is correct..
3. We got help from SAP..But not solved problem.
Here we copied same data in the Quality system and the Team calendar, My trainings working fine ..
I donu2019t know why Team calendar, My trainings is not showing any data in the Production system
Let me know ASAP.

Hi,
All r correct in both system .............even following things i have checked .................which i got from reply from U.
01.07.2009 - 11:29:52 UK - Reply by SAP
Hello Pinki
You need to check the settings in your different systems
the #group of organizational views# MSS_LTV_EE is maintained
for the Team Calendar and MSS_LEA_EE for the request mode.
Check the IMG step
Integration with Other mySAP.com Components ->
Business Packages/Functional Packages -> Object and Data Provider
-> Organizational Structure Views -> Group Organizational Structure vieMSS_LTV_EE (Team: Employee selection): the two organizational
views MSS_LTV_EE_ALL and MSS_LTV_EE_DIR are assigned.
MSS_LEA_EE (Leave Request: Employee Selection) the two
organizational views MSS_LEA_EE_ALL and MSS_LEA_EE_DIR are assigned
These organizational views are defined in IMG step #
#define Organizational Structure views#:
They have the following Object selections:
MSS_LTV_EE_ALL: MSS_LTV_EE_ALL (All Employees)
MSS_LTV_EE_DIR: MSS_LTV_EE_DIR (Team: Direct Reports)
MSS_LEA_EE_ALL: MSS_LEA_EE_ALL (All Employees)
MSS_LEA_EE_DIR: MSS_LEA_EE_DIR (Absence: Directly Subordinate Employees)Then you have to check the IMG step # Object
Also check these
Please use the evaluation path "ORGASS".
To change the evaluation path kindly go to the view V_TWPC_V , look for
the ESSDIR view and double click on the ESSDIR.
Please check the above customisation,
Tthe evaluation path SAP_MANG is used to determine
the root objects. "Eval.Path for Root Objects" on the detail
screen in the view V_TWPC_V "View Definition" for further information onthis topic).
Also check the customisation using
report RHSTRU00
In view V_TWPC_VG, the view group PTESS of view ESSDIR with position
01 should exist. Please correct it as well
and ensure that
In the View Cluster(T-Code SM34) VC_TWPC_ORGVWGRP there should be
a record for the group 'ATTEND'.
Hope this will help you.
Best Regards,
Siddharth Rajora
HCM
SAP LABS India

Popularity Trends not showing any data

Hi,
we are using SP 2013 RTM version and it is not showing any data in the usage statistics when we run the popularity trends reports. Is this a bug with SP 2013 RTM version? or am i missing something?
Thanks
techie

Hi,
Per my understanding, Popularity Trends report showing no data in your environment.
For narrowing down the issue, I suggest you check whether the two timer jobs “Microsoft SharePoint Foundation Usage Data Import” and “Microsoft SharePoint Foundation Usage Data
Processing” which are handling the usage report runs without issue.
More information about how to deal with this issue for your reference:
http://blog.fpweb.net/troubleshooting-sharepoint-2013-web-analytics/#.VQKMGHkfqwU
http://snowburnt.blogspot.com/2014/12/how-to-troubleshoot-sharepoint-usage.html
http://geekswithblogs.net/bjackett/archive/2013/08/26/powershell-script-to-workaround-no-data-in-sharepoint-2013-usage.aspx
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

Tables & Index not showing any data

Hi All,
I have done the db2 upgradtion from 9.1 to 9.7 with fix pack 4.I am unable to see table size after upgrade. I have checked all the sap collector job running fine.
db02>history>tables& index not showing any data
Regrads,
Mnai

Please make sure RSCOL00 running or execute it manually.
Did you try to run the stats in DB13 ?

Sharepoint web analytics does not show any data

Hello,
We installed Sharepoint Web Analytics some days ago (separated application pool).
Installation completed successfully.
Search works fine and returns expected results.
But reports still don't show any data :
Data Last Updated: 15.08.2014 02:00:16 There is no data available for this report. Here are some possible reasons: (1) Web Analytics has not been enabled long enough to generate data; (2)
There is insufficient data to generate this report; (3) Data logging required for this report might not be enabled; (4) Data aggregation might not be enabled at the level required for this report.
What I tried :
connect to website using different users (admin user included)
checked that needed services on server are started (especially analytics services)
restart services Web Analytics Data Processing Service and
Web Analytics Web Service
checked that all services applications are started (WSS_UsageApplication status was
stopped so I started it using Sharepoint 2010 Management Shell)
checked service application associations (especially if Analytics Service Application Proxy is checked)
manual execution of jobs (Web Analytics Trigger Workflows Timer Job, Microsoft SharePoint Foundation Usage Data Import, Microsoft SharePoint Foundation Usage Data Processing)
manual start of incremental crawling
restart IIS
checked scope of data logging (especially if Enable usage data collection and
Enable health data collection are checked)
checked that the .usage file are generated correctly on the disk
checked in the Logging database (WSS_UsageApplication) that the
RequestUsage view contains data collected from the .usage files
checked that data is successfully extracted from the logging database into the staging database (LastLoggingExtractionTime)
checked that data was successfully copied from the staging database to the reporting database (LastDataCopyTime)
checked on the website side that Advanced Web Analytics feature is
Active
recreate web analytics application
checked for any message in ULS logs that could help... I only noticed that error :
The SharePoint Health Analyzer detected an error. Drives are running out of free space. Available drive space is less than twice the value of physical memory. Can it cause the problem ?
All appears to work fine but I can't see any data in the reports.
The thing is that Inventory data is collected successfully and I can see the related reports. Traffic and Search data are still empty.
Anything else I can try ?
Thanks.

Yes I have granted application pool identity full control on the Web Analytics Service Application.
I also checked that Sharepoint 2010 timer service is started.
I can't see anything in the logs that could help, when accessing the reports. The only thing I noticed is this kind of log which occurs
regularly and seems to be an exception :
Enumerating all sites in SPWebApplication Name=SharePoint - 80.
Site Enumeration Stack:
at Microsoft.SharePoint.Administration.SPSiteCollection.get_Count()
at Microsoft.SharePoint.Taxonomy.UpdateHiddenListJobDefinition.Execute(Guid targetInstanceId)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
Maybe it can be the cause ?
I have also cleaned the drive where .usage file are generated so the error "Drives are running out of free space. Available drive space is less than twice the value of physical memory." does not appear anymore.

XL Reporter not getting any data

Hi
When I am using XL Composer and generating report using it, I am getting data what the fields I have dragged. Not getting any data when generating same report in organizer from composer except the Title field names. Before I got but now I am not getting.
STEPS Taken
 XL Reporter Composer Tool bar
 Generate
 Generate(Window)(Name: given Sample & checked Generate report then ok)
And having another problem when generating sample reports I am getting data and when editing that report are preparing new with some fields, I am not getting any data.
Example: I have made Edit of Bank Book and placed extra field Document No, saved the report and generated I am not getting any data except titled fields.
 In new report I have taken BP Code and sales Employee I am not getting any data.
Please Can any one help me, It is urgent.
Thanks in Advance.
Urs
Sindhu

If you did not select any "total" field (quantities, totals, etc), XL Reporter will show data only at report composer. It will not work at final XL Report itself.
This is a normal behaviour of XL Reporter, unfortunetaly.
If you are trying to create a simple list of records, I suggest to use Query Generator, combined to PLD in order to get a formatted report.

Event Management Datasources 0SCEM_1 ,2 ,3 not showing any data in RSA3.

Hi Experts,
I am trying to load SC Event Management data into BW.
On the source system side , I did following thins, Still I'm not finding any data in RSA3.
a) Use Tcode- /SAPTRX/BWGS and
i) Set the BW upload mode to V1 u2013 Direct Delta Upload
ii) Activate the BW upload for the extraction structures /SAPTRX/BWTFSEE, /SAPTRX/BWTFSEG, and /SAPTRX/BWTFSEH.
iii) You must generate the DataSources for all the extraction structures (/SAPTRX/BWTFSEE, /SAPTRX/BWTFSEG, and /SAPTRX/BWTFSEH) for which appends have been changed or created. To generate the DataSources, in the dialog structure, choose DataSources Generation for the relevant extraction structure. If you use the standard appends without modifications, you do not have to generate the DataSources.
b) Initialize set up tables for EM upload using Tcode- /SAPTRX/BWID
c) The three setup tables must be filled with the relevant data for the respective event handlers. This enables the initial data upload to SAP NW BI. The parameter for the BW upload has been set to u2018 u2019 for the BW Upload Rule. This indicator specifies that an initial upload is carried out. This is executed Tcode- /SAPTRX/TSC0TR.
d) Afterwards trigger the initial loading using Tcode- /SAPTRX/BWIU.This transaction sends the BWUPLOAD event to all the event handlers selected according to the
specified selection criteria. Note that even inactive event handlers can be selected. The system collects all the relevant data (according to the rules in the BW profile) for the selected event handlers (those for which the BWUPLOAD event has been reported) and stores the data in the three setup tables.
e) You must check if the parameter for the BW upload is set to delta upload using Tcode- /SAPTRX/TSC0TR
Still I'm not seeing any data in RSA3. Can any one please help me to extract the data into BW side.
Regards
Akki.

Hi,
You can below link from extraction , It may help.
http://wiki.sdn.sap.com/wiki/display/SCM/SAPEMIntegrationwithSAPNetWeaverBI
Regards,
Satya

LISTCUBE not showing any data with SAPKW70110

Hi all
we just upgraded our system from SAPKW70107 to SAPKW70110 and now do have the following problem:
All InfoCubes containing non-cumulatives don't show any data anymore in transaction LISTCUBE.
All the cubes did work fine before.
What is curious is that some queries based on these cubes are working and at least showing some data (but not the correct data).
We couldn't find anything in the notes so far..
Anything we could do?
Regards
bivision

Hi,
You can use improvised listcube to display data. It can be created by taking help from the following link ;-
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70e092a3-9d8a-2d10-6ea5-8846989ad405?QuickLink=index&overridelayout=true
However you should raise this issue to SAP .
Navesh
Edited by: navsamol on Oct 11, 2011 8:17 PM

Audit log is not showing any data GRC 10 PC

Hi,
when we are trying to execute the audit logs
under reports in process controls,not showing data and getting
error like no data matching the entere selec criteria.
do we need any configuration changes required
Thanks
GRC Admin

Hello,
check the table DBTABLOG if data contains or not,if no data then maintain the parameter rec/client in RZ11 and try the same
while executing the audit log need to maintain the time frame as HH:MM not HH:MM:SS
check the below link about DBTABLOG
Change Log Monitor Enabling by Table log Activation in SAP Production Environment - Governance, Risk and Compliance - SC…
Regards
Baithi

CRM Interactive reports not loading any data on WEB UI

CRM BI client is setup properly by following CRM IR config guide C41.
/CRMBW/CONFIG_WIZARD doesn't show any major errors. I am able to create
the custom interactive reports but when these reports are executed no
data shows up in the report.For example ,we are building interactive
reports under opportunities area for a user, who has opportunities in
the system.
Our CRM Sytem is on CRM7.0 EHP1 SPS3.
Thanks
Thirumala

Hi Thirumala,
if still relevant (sorry for the late reply): check if the user is assigned to a business partner (employee), which is assignet to a correct position in the CRM Org model, and that this business partner is the employee responsible of the sales documents you want him to see in the reports.
Alternatively, the user's business partner can be a manager of such an employee.
Best regards

11g Cube not showing any data with no Rejected records

Hi David ,
Strangely one of my 11g Cube is not showing data from today as it is showing all records rejected . However when I lookup Rejected records table I didn't find any records .Not sure what is happening . When I want to peep out the AWM queries from CUBE_BUILD_LOG and ran to the database in the AWM schema the records are retruning perfectly fine . I wonder same query is firing during Cube load but without any data ? My Cube build script has only LOAD and Aggregate .
after maintain My dimensions data are looking fine but no data populated after Cube maintenance . My MV switch off across all dimensions and cubes .
I navigate to CUBE_OPERATION_LOG and not able to comprehend about the content.
Any advice ?
Thanks and Regards,
DxP

Hi David ,
To be very frank today is very bad day ... Please see below my observation:
Executed below to make sure that no key values in dimension is missing but present in fact . All below query returns no row.
select distinct owner_postn_wid from w_synm_rx_t_f
minus
select distinct row_wid from postn_dh
select distinct payer_type_Wid from w_synm_rx_t_f
minus
select distinct row_wid from wc_ins_plan_dh
select distinct market_wid from w_synm_rx_t_f
minus
select distinct row_wid from w_product_dh
select distinct period_day_wid from w_synm_rx_t_f
minus
select distinct row_wid from w_daytime_D
select distinct contact_wid from w_synm_rx_t_f
intersect
select distinct row_wid from w_person_d
select distinct X_TERR_TYPE_WID from w_synm_rx_t_f
minus
select distinct row_wid from W_LOV_D
============================
Below returns count of 0 rows : ensure no NULL present
select count(1) from w_synm_rx_t_f where contact_wid is null;
select count(1) from w_synm_rx_t_f where owner_postn_wid is null;
select count(1) from w_synm_rx_t_f where payer_type_Wid is null;
select count(1) from w_synm_rx_t_f where period_day_wid is null;
select count(1) from w_synm_rx_t_f where X_TERR_TYPE_WID is null;
select count(1) from w_synm_rx_t_f where market_wid is null;
+++++++++++++++++++++++++++++++++
Cube Build Log has below entry:
796 0 STARTED CLEAR VALUES MKT_SLS_CUBE CUBE NNOLAP NN_OLAP_POC P14:JAN2010 17-AUG-11 07.12.08.267000000 PM +05:30 JAVA 1 C 47141 67 0 1
796 0 COMPLETED CLEAR VALUES MKT_SLS_CUBE CUBE NNOLAP NN_OLAP_POC P14:JAN2010 17-AUG-11 07.12.08.267000000 PM +05:30 JAVA 1 C 47141 67 0 2
796 0 STARTED LOAD MKT_SLS_CUBE CUBE NNOLAP NN_OLAP_POC P14:JAN2010 17-AUG-11 07.12.08.283000000 PM +05:30 JAVA 1 C 47142 68 0 1
796 0 SQL LOAD MKT_SLS_CUBE CUBE "<SQL>
<![CDATA[
SELECT /*+ bypass_recursive_check cursor_sharing_exact no_expand no_rewrite */
T16_ROW_WID ALIAS_127,
T13_ROW_WID ALIAS_128,
T10_ROW_WID ALIAS_129,
T7_ROW_WID ALIAS_130,
T4_ROW_WID ALIAS_131,
T1_ROW_WID ALIAS_132,
SUM(T20_MKT_TRX) ALIAS_133,
SUM(T20_MKT_NRX) ALIAS_134
FROM
SELECT /*+ no_rewrite */
T1."CONTACT_WID" T20_CONTACT_WID,
T1."MARKET_WID" T20_MARKET_WID,
T1."OWNER_POSTN_WID" T20_OWNER_POSTN_WID,
T1."PAYER_TYPE_WID" T20_PAYER_TYPE_WID,
T1."PERIOD_DAY_WID" T20_PERIOD_DAY_WID,
T1."MKT_NRX" T20_MKT_NRX,
T1."MKT_TRX" T20_MKT_TRX,
T1."X_TERR_TYPE_WID" T20_X_TERR_TYPE_WID
FROM
NN_OLAP_POC."W_SYNM_RX_T_F" T1 )
T20,
SELECT /*+ no_rewrite */
T1."ROW_WID" T16_ROW_WID
FROM
NN_OLAP_POC."W_DAYTIME_D" T1 )
T16,
SELECT /*+ no_rewrite */
T1."ROW_WID" T13_ROW_WID
FROM
NN_OLAP_POC."W_PERSON_D" T1 )
T13,
SELECT /*+ no_rewrite */
T1."ROW_WID" T10_ROW_WID
FROM
NN_OLAP_POC."WC_INS_PLAN_DH" T1 )
T10,
SELECT /*+ no_rewrite */
T1."ROW_WID" T7_ROW_WID
FROM
NN_OLAP_POC."W_LOV_D" T1 )
T7,
SELECT /*+ no_rewrite */
T1."ROW_WID" T4_ROW_WID
FROM
NN_OLAP_POC."POSTN_DH" T1 )
T4,
SELECT /*+ no_rewrite */
T1."ROW_WID" T1_ROW_WID
FROM
NN_OLAP_POC."W_PRODUCT_DH" T1 )
T1
WHERE
((T20_PERIOD_DAY_WID = T16_ROW_WID)
AND (T16_ROW_WID = 20100101)
AND (T20_CONTACT_WID = T13_ROW_WID)
AND (T20_PAYER_TYPE_WID = T10_ROW_WID)
AND (T7_ROW_WID = T20_X_TERR_TYPE_WID)
AND (T20_OWNER_POSTN_WID = T4_ROW_WID)
AND (T20_MARKET_WID = T1_ROW_WID)
AND ((T20_PERIOD_DAY_WID) IN ((20100107.000000) , (20100106.000000) , (20100128.000000) , (20100124.000000) , (20100121.000000) , (20100118.000000) , (20100115.000000) , (20100109.000000) , (20100125.000000) , (20100114.000000) , (20100111.000000) , (20100110.000000) , (20100104.000000) , (20100101.000000) , (20100129.000000) , (20100123.000000) , (20100117.000000) , (20100113.000000) , (20100108.000000) , (20100131.000000) , (20100120.000000) , (20100116.000000) , (20100119.000000) , (20100105.000000) , (20100102.000000) ,
(20100130.000000) , (20100127.000000) , (20100122.000000) , (20100112.000000) , (20100103.000000) , (20100126.000000) ) ) )
GROUP BY
(T1_ROW_WID, T4_ROW_WID, T7_ROW_WID, T10_ROW_WID, T13_ROW_WID, T16_ROW_WID)
ORDER BY
T1_ROW_WID ASC NULLS LAST ,
T4_ROW_WID ASC NULLS LAST ,
T7_ROW_WID ASC NULLS LAST ,
T10_ROW_WID ASC NULLS LAST ,
T13_ROW_WID ASC NULLS LAST ,
T16_ROW_WID ASC NULLS LAST ]]>/>
</SQL>" NNOLAP NN_OLAP_POC P14:JAN2010 17-AUG-11 07.12.08.627000000 PM +05:30 JAVA 1 MAP1 C 47142 68 0 2
796 0 COMPLETED LOAD MKT_SLS_CUBE CUBE "<CubeLoad
LOADED="0"
REJECTED="4148617"/>" NNOLAP NN_OLAP_POC P14:JAN2010 17-AUG-11 07.12.40.486000000 PM +05:30 JAVA 1 C 47142 68 0 3
796 0 STARTED UPDATE MKT_SLS_CUBE CUBE NNOLAP NN_OLAP_POC P14:JAN2010 17-AUG-11 07.12.40.501000000 PM +05:30 JAVA 1 C 47143 69 0 1
796 0 COMPLETED UPDATE MKT_SLS_CUBE CUBE NNOLAP NN_OLAP_POC P14:JAN2010 17-AUG-11 07.12.40.548000000 PM +05:30 JAVA 1 C 47143 69 0 2
+++++++++++++++++
You can observer clear rejection of 4 million rows ... Ran the above query which returns my data successfully.
Look out to CUBE_REJECTED records take the sample record and put into the above query it is returning the data fine with my measures and dimension WID's :(PLEASE SEE BELOW THE FILTERS on ROW_WID)
=========================
SELECT /*+ bypass_recursive_check cursor_sharing_exact no_expand no_rewrite */
T16_ROW_WID ALIAS_127,
T13_ROW_WID ALIAS_128,
T10_ROW_WID ALIAS_129,
T7_ROW_WID ALIAS_130,
T4_ROW_WID ALIAS_131,
T1_ROW_WID ALIAS_132,
SUM(T20_MKT_TRX) ALIAS_133,
SUM(T20_MKT_NRX) ALIAS_134
FROM
SELECT /*+ no_rewrite */
T1."CONTACT_WID" T20_CONTACT_WID,
T1."MARKET_WID" T20_MARKET_WID,
T1."OWNER_POSTN_WID" T20_OWNER_POSTN_WID,
T1."PAYER_TYPE_WID" T20_PAYER_TYPE_WID,
T1."PERIOD_DAY_WID" T20_PERIOD_DAY_WID,
T1."MKT_NRX" T20_MKT_NRX,
T1."MKT_TRX" T20_MKT_TRX,
T1."X_TERR_TYPE_WID" T20_X_TERR_TYPE_WID
FROM
NN_OLAP_POC."W_SYNM_RX_T_F" T1 )
T20,
SELECT /*+ no_rewrite */
T1."ROW_WID" T16_ROW_WID
FROM
NN_OLAP_POC."W_DAYTIME_D" T1 )
T16,
SELECT /*+ no_rewrite */
T1."ROW_WID" T13_ROW_WID
FROM
NN_OLAP_POC."W_PERSON_D" T1 )
T13,
SELECT /*+ no_rewrite */
T1."ROW_WID" T10_ROW_WID
FROM
NN_OLAP_POC."WC_INS_PLAN_DH" T1 )
T10,
SELECT /*+ no_rewrite */
T1."ROW_WID" T7_ROW_WID
FROM
NN_OLAP_POC."W_LOV_D" T1 )
T7,
SELECT /*+ no_rewrite */
T1."ROW_WID" T4_ROW_WID
FROM
NN_OLAP_POC."POSTN_DH" T1 )
T4,
SELECT /*+ no_rewrite */
T1."ROW_WID" T1_ROW_WID
FROM
NN_OLAP_POC."W_PRODUCT_DH" T1 )
T1
WHERE
((T20_PERIOD_DAY_WID = T16_ROW_WID)
AND (T16_ROW_WID = 20100101)
AND (T20_CONTACT_WID = T13_ROW_WID)
AND (T20_PAYER_TYPE_WID = T10_ROW_WID)
AND (T7_ROW_WID = T20_X_TERR_TYPE_WID)
AND (T20_OWNER_POSTN_WID = T4_ROW_WID)
AND (T20_MARKET_WID = T1_ROW_WID)
AND T13_ROW_WID = 255811
AND T7_ROW_WID = 122
AND T4_ROW_WID =3
AND T1_ROW_WID=230
AND T10_ROW_WID = 26
AND ((T20_PERIOD_DAY_WID) IN ((20100107.000000) , (20100106.000000) , (20100128.000000) , (20100124.000000) , (20100121.000000) , (20100118.000000) , (20100115.000000) , (20100109.000000) , (20100125.000000) , (20100114.000000) , (20100111.000000) , (20100110.000000) , (20100104.000000) , (20100101.000000) , (20100129.000000) , (20100123.000000) , (20100117.000000) , (20100113.000000) , (20100108.000000) , (20100131.000000) , (20100120.000000) , (20100116.000000) , (20100119.000000) , (20100105.000000) , (20100102.000000) ,
(20100130.000000) , (20100127.000000) , (20100122.000000) , (20100112.000000) , (20100103.000000) , (20100126.000000) ) ) )
GROUP BY
(T1_ROW_WID, T4_ROW_WID, T7_ROW_WID, T10_ROW_WID, T13_ROW_WID, T16_ROW_WID)
ORDER BY
T1_ROW_WID ASC NULLS LAST ,
T4_ROW_WID ASC NULLS LAST ,
T7_ROW_WID ASC NULLS LAST ,
T10_ROW_WID ASC NULLS LAST ,
T13_ROW_WID ASC NULLS LAST ,
T16_ROW_WID ASC NULLS LAST
=================================
THE XML export of CUBE as below:
<!DOCTYPE Metadata [
<!ENTITY % BIND_VALUES PUBLIC "OLAP BIND VALUES" "OLAP METADATA">
%BIND_VALUES;
]>
<Metadata
Version="1.2"
MinimumDatabaseVersion="11.2.0.1">
<Cube
ETViewName="MKT_SLS_CUBE_VIEW"
Name="MKT_SLS_CUBE">
<Measure>
<BaseMeasure
SQLDataType="NUMBER"
ETMeasureColumnName="TRX"
Name="TRX">
<Description
Type="LongDescription"
Language="AMERICAN"
Value="TRX">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="TRX">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="TRX">
</Description>
</BaseMeasure>
</Measure>
<Measure>
<BaseMeasure
SQLDataType="NUMBER"
ETMeasureColumnName="NRX"
Name="NRX">
<Description
Type="LongDescription"
Language="AMERICAN"
Value="NRX">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="NRX">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="NRX">
</Description>
</BaseMeasure>
</Measure>
<CubeMap
Name="MAP1"
IsSolved="False"
Query="W_SYNM_RX_T_F"
WhereClause="W_DAYTIME_D.ROW_WID = 20100101">
<MeasureMap
Name="TRX"
Measure="TRX"
Expression="W_SYNM_RX_T_F.MKT_TRX">
</MeasureMap>
<MeasureMap
Name="NRX"
Measure="NRX"
Expression="W_SYNM_RX_T_F.MKT_NRX">
</MeasureMap>
<CubeDimensionalityMap
Name="TIME"
Dimensionality="TIME"
MappedDimension="TIME.CALENDER.MONTHLY"
JoinCondition="W_SYNM_RX_T_F.PERIOD_DAY_WID = W_DAYTIME_D.ROW_WID"
Expression="W_DAYTIME_D.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="CUSTOMER"
Dimensionality="CUSTOMER"
MappedDimension="CUSTOMER.CUSTOMER_HIERARCHY.DETAIL_LEVEL"
JoinCondition="W_SYNM_RX_T_F.CONTACT_WID = W_PERSON_D.ROW_WID"
Expression="W_PERSON_D.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="INS_PLAN_DH"
Dimensionality="INS_PLAN_DH"
MappedDimension="INS_PLAN_DH.INS_PLAN.DETAIL"
JoinCondition="W_SYNM_RX_T_F.PAYER_TYPE_WID = WC_INS_PLAN_DH.ROW_WID"
Expression="WC_INS_PLAN_DH.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="LIST_OF_VALUES"
Dimensionality="LIST_OF_VALUES"
MappedDimension="LIST_OF_VALUES.LOV_HIERARCHY.DETAIL_LEVEL"
JoinCondition="W_LOV_D.ROW_WID = W_SYNM_RX_T_F.X_TERR_TYPE_WID"
Expression="W_LOV_D.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="POSITIONDH"
Dimensionality="POSITIONDH"
MappedDimension="POSITIONDH.POST_HIER.DETAIL"
JoinCondition="W_SYNM_RX_T_F.OWNER_POSTN_WID = POSTN_DH.ROW_WID"
Expression="POSTN_DH.ROW_WID">
</CubeDimensionalityMap>
<CubeDimensionalityMap
Name="PRODH"
Dimensionality="PRODH"
MappedDimension="PRODH.PRODHIER.DETAILLVL"
JoinCondition="W_SYNM_RX_T_F.MARKET_WID = W_PRODUCT_DH.ROW_WID"
Expression="W_PRODUCT_DH.ROW_WID">
</CubeDimensionalityMap>
</CubeMap>
<Organization>
<AWCubeOrganization
MVOption="NONE"
SparseType="COMPRESSED"
MeasureStorage="SHARED"
NullStorage="MV_READY"
CubeStorageType="NUMBER"
PrecomputePercent="35"
PrecomputePercentTop="0"
PartitionLevel="TIME.CALENDER.MONTHLY"
AW="&AW_NAME;">
<SparseDimension
Name="TIME"/>
<SparseDimension
Name="CUSTOMER"/>
<SparseDimension
Name="INS_PLAN_DH"/>
<SparseDimension
Name="LIST_OF_VALUES"/>
<SparseDimension
Name="POSITIONDH"/>
<SparseDimension
Name="PRODH"/>
<DefaultBuild>
<![CDATA[BUILD SPEC LOAD_AND_AGGREGATE
LOAD NO SYNCH,
SOLVE
)]]>
</DefaultBuild>
</AWCubeOrganization>
</Organization>
<Dimensionality
Name="TIME"
ETKeyColumnName="TIME"
Dimension="TIME">
</Dimensionality>
<Dimensionality
Name="CUSTOMER"
ETKeyColumnName="CUSTOMER"
Dimension="CUSTOMER">
</Dimensionality>
<Dimensionality
Name="INS_PLAN_DH"
ETKeyColumnName="INS_PLAN_DH"
Dimension="INS_PLAN_DH">
</Dimensionality>
<Dimensionality
Name="LIST_OF_VALUES"
ETKeyColumnName="LIST_OF_VALUES"
Dimension="LIST_OF_VALUES">
</Dimensionality>
<Dimensionality
Name="POSITIONDH"
ETKeyColumnName="POSITIONDH"
Dimension="POSITIONDH">
</Dimensionality>
<Dimensionality
Name="PRODH"
ETKeyColumnName="PRODH"
Dimension="PRODH">
</Dimensionality>
<Description
Type="LongDescription"
Language="AMERICAN"
Value="MKT SLS CUBE">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="MKT SLS CUBE">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="MKT SLS CUBE">
</Description>
<ConsistentSolve>
<![CDATA[SOLVE
SUM
 MAINTAIN COUNT
 OVER ALL
)]]>
</ConsistentSolve>
</Cube>
</Metadata>
+++++++++++++++++++++++
I dropped the AW and create new from exported XML and maintain all dimensions and then rebuild . Still have the issue :(
Any thing you can hightlight from above ?
Thanks,
DxP
Also I sustpect whethere it is a issue due to below error caused when I click on one of my Position_Hier view from AWM : even if I select that view it is throwing the error in SQL developer after displaying first couple of rows (while page down)
java.sql.SQLException: ORA-33674: Data block size 63 exceeds the maximum size of 60 bytes.
at oracle.olap.awm.util.jdbc.SQLWrapper.execute(Unknown Source)
at oracle.olap.awm.querydialog.PagedQueryDialog$1.construct(Unknown Source)
at oracle.olap.awm.ui.SwingWorker$2.run(Unknown Source)
at java.lang.Thread.run(Thread.java:595)
Edited by: e_**** on Aug 17, 2011 8:41 PM

Purchase requisition report not showing any data R12.04

Similar Messages

Maybe you are looking for