Purchase Requisition transfer - Queue issue

Hello!
Regarding the Purchase Requisition transfer to SRM, I'm running manually the function BBP_EPRTRANS_INSERT and then the BBP_EXTREQ_TRANSFER program. It show us that the Preq was correctly sent to SRM... but then, when we go to the SMQ1, I can see the queue with error : SYSFAIL, I saw the logs and its showing : Function module "BBP_BC_EXTREQ_INB" not found.
My question, I can see that this function is created in SRM but no in ECC6...should we have this function created on ECC6??? Is there any SAP note to fix it?
Thanks,
Rodrigo
Edited by: Rodrigo Votisch on Jun 10, 2008 8:41 PM

Hi,
Pls see this related thread for more pointers:
Re: Check status qrfc BBP_EXTREQ_TRANSFER
Also check whether the RFC connection between the 2 systems is working.
Check these notes:
Note 812913 - RFC destination/logical system for external requests
Note 676871 - Error during transfer of external requirements
BR,
Disha.
Do reward points for useful answers.

Similar Messages

Purchase Requisition transfer from ECC to SRM via XI

Experts,
Please let me know if you have any information on the following issue:
Environment : SRM 7.0, ECC ep4, Extended Classic scenario
The purchase requisitions have been created in ECC and released. I believe in SRM 7.0 the PR's get automatically transferred to SRM Sourcing cockpit via XI from ECC.
One PR was pushed manually from SMQ1(Outbound queue ) in ECC and this failed due to a login issue in XI.
The XI was using the interface PurchaseRequestERPSourcingRequest.
My question is
1. When the PR is released in ECC, where to check if the PR is pushed to XI. Do we need to schedule a job? When I checked SMQ1 (outbound queue, the queues are empty)
2. Do we need to define the partner profile in ECC for XI in We20. If so, then what message types to use for the IDocs going from ECC to XI.
2. Do we need to configure the interface PurchaseRequestERPSourcingRequest in XI to map the incoming PR from ECC.
3. In transaction SXMB_moni in XI I am not able to pull the XML messages. What options options do I need to
set to pull the messages that errored out.
Thanks,
Scott.

Hi All,
Hope this helps you for XI configuration
Importing Business Scenarios for Sourcing
In this section, you transfer the business scenario Strategic Sourcing from the SAP Integration Repository, generate it, and activate it.
Prerequisites
You have:
Defined the business systems for SAP Supplier Relationship Management (SAP SRM) and SAP ERP in the SAP System Landscape Directory. For more information about SAP NetWeaver Process Integration (SAP NetWeaver PI), see the SAP Marketplace
Imported the SAP NetWeaver PI content for SAP SRM into the SAP Integration Repository.
Procedure
Log on to the SAP Netweaver PI system.
Choose Integration Builder: Configuration.
In the left pane, select the Objects tab.
Choose Service Without Partner Business System .
Right-click to display the context menu and choose Business Systems Assign Business System . This opens the wizard.
Choose Continue. The wizard guides you through the required steps.
Create the business system for both SAP SRM and ERP (you can bypass this step if the business system is already setup).
Select a business system.
You can create communication channels either manually or automatically. You can create them automatically here. In this case, the systems are applied from the SAP System Landscape Directory (SLD). Channels must be complete in terms of URLs and authentication information.
Choose Finish, and then choose Close.
11. On the main screen, choose Tools Transfer Integration Scenario from Integration Repository . This opens a wizard.
Choose Name using input help SE_Sourcing_Enhancements
Choose Continue. The scenario name is SE_Sourcing_Enhancements.
Choose Finish and then choose Close. The Business Scenario Configurator opens automatically.
Choose Component View.
The Select Component View window opens.
Choose Apply.
Choose Assign Services. The Assign Services to Application Component window opens.
Press F4 to retrieve the available services.
Choose Assign.
Select the related service and choose OK.
Assign a business service to all roles.
Choose Configure Connections.
Select the connections from the Service Assignment tab.
Press F4 in the Communication Channel field.
Select a communication channel. This channel must be of type XI.
Note
If the systems are applied from the SAP Landscape Directory, the Integration Builder automatically creates the communication channels.
If the systems are not applied from the SAP Landscape Directory, you create communication channels manually. To do this choose an existing service and then Communication Channel using context menu New. You must assign a communication channel for each connection.
End of the note.
Choose OK and then choose Apply.
Choose Generate to open the Create Configuration Objects window.
Choose Simulation, then Generate, then mark all in the list Scope of Generation.
Choose Start to generate a log. Check the log for errors and save it if required.
In the Close Integration Scenario screen, choose Apply.
In the left pane, select the Scenarios tab; your scenario has been added.
In the left pane, select the Change List tab.
Expand the Standard Change List.
Right click on the scenario name SE_Sourcing_Enhancements and choose Activate.
Regards
Sam

Purchase Requisition Automatically Generating Issue

Hi Guru:
I failed to generate the purchase requistion after MRP running via transaction md03,please see my setting of MRP1-4 as below:
MRP1:PD as MRP type,then the reorder point is 300,the measurement of unit is KG,I set FX as lot size,and fixed lot size is 100.
MRP2:the procurement type is F,and plan delivery time is 2 days,GR processing time is 1 day.
MRP3:period indicator is M,availability check is 01,total replenish lead time is 3 days.
And I had maintained the contract and source list to this material,but it cannot be generated purchase requisition automatically,what's wrong???Help!

You can run MRP again with proper parameters and you will get PurReqs directly instead of PldOrds:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/f4/7d2da044af11d182b40000e829fbfe/frameset.htm
("Creation indicator for procurement proposals for materials that are procured externally")
You can use parameters: 1, 3, 1, 3
Regards,
Csaba

Purchase requisition release strategy issue

I have created release strategy in development, it was working fine with work flow. When I try to import the TR's I found that the document types in development are not in quality so I changed the document type. then I tried to create a PR and when I clicked on messages its not triggering the release strategy don't know why. In total there are 2 characteristic plant and document type.I even tried to delete the plant characteristic and tried again creating PR but still no use. let me put some screen shots comparing the development and quality. Please do help.

Thanks for the quick reply, I just checked that the over all indicator for the development and quality, I found that in development its not activated while its activated in quality will that be of any issue.
In development
In Quality

Unable to transfer Purchase Requisition from ECC to EBP

Dear Friends.
We are unable to transfer PR from ECC to EBP. System issue stop message in SLG1 transaction for object BBP_EXTREQ
Stop Message Type: Document type for determined backend system is missing.
Warning Message Type: Grant 1111 does not exist.
As per configuration guide we have performed following setting in EBP client
1. We have created organization unit Entry Channel under company code.
2. Under Entry Channel we create Local Purchasing Organization.
3. Under Loc Purchasing Org we created Local Purchasing Group with
 - attribute BUK as backend company code
 - attribute BSA as backend PR type (NB)
 - this group is responsible for Entry channel procurement (setting in Function tab)
4. Under Loc Purchasing Group we assigned RFC user which is same defined as RFC user in both EBP and ECC client.
 - attribute DP_PROC_TY defined as backend ECC PO type (NB)
5. Attribute CUR define for entry Channel.
6. Remote connection established with the same user defined under Organization Unit
7. Remote user has profile sap_all and sap_new authorization.
8. Material group, Material Type and Vendors are replicated from backend system.
9. Sourcing always allowed is set for all product categories in Define sourcing for Product Category.
10. Extended Classic Scenario is active.
11. Defined Tolerance check and assigned TOG attribute.
Performed following setting in ECC client.
12. Defined RFC connection and user same as defined in Organization unit.
13. Defined profile which reference to EBP logical system
14. Maintained table V_T160EX with Material group/Pur group/ Profile combination.
Finally transfer Purchase Requisition from ECC to EBP via report BBP_EXTREQ_TRANSFER. Further the outbound Queue fails with status ANORETRY. Also the log displayed the error Application aborted due to serious problems
SLG1 in EBP issues stop message Document type for determined backend system missing and warning message Grant 1111 does not exist.
Any idea what could be the reason?
Please help!!
Sandeep

Hi
It seems there is some problem with the Configuaration settings in SRM as well as R/3 side.
Anyways, please have a look at the following links, which might help.
Direct Procurement
http://help.sap.com/saphelp_srm50/helpdata/en/b7/15d4396898042fe10000000a114084/frameset.htm
Prerequisites for External Requirements
http://help.sap.com/saphelp_srm50/helpdata/en/18/db183d30805c59e10000000a114084/frameset.htm
Attributes for the SRM Scenario
http://help.sap.com/saphelp_srm50/helpdata/en/84/a7e3389870c05ce10000000a114084/frameset.htm
Direct Material Scenario: Other Planned External Requirements
http://help.sap.com/saphelp_srm50/helpdata/en/6a/4b9e3b891da20ee10000000a114084/frameset.htm
Number range settings
http://help.sap.com/saphelp_srm50/helpdata/en/5d/fd7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/b7/15d4396898042fe10000000a114084/frameset.htm
Define Transaction types
http://help.sap.com/saphelp_srm50/helpdata/en/10/fd7d3cb7f58910e10000000a114084/frameset.htm
Direct Material Scenario with Planning in SAP APO
http://help.sap.com/saphelp_srm50/helpdata/en/d3/4b9c3b122efc6ee10000000a114084/frameset.htm
Hope this will help.
Regards
- Atul

Issuing storage location for purchase requisition

Hi All,
Anyone knew how to have a default issuing storage location on purchase requisition (source of supply tab) created through MRP?
Thanks.
Jump

Hi,
For this you need to implement BADI MD_EXT_SUP in combination with special procurement type 40 or 45.
Documentation of this badi:
Business Add-In for Determination of Issuing Storage Locatio
    Use
    You can use this Business Add-In (BAdI) to control the determination of
    the issuing storage location during stock transfer processing.
    The BAdI is used in the following components:
    Material requirements planning (PP-MRP)
    The BAdI runs both for manual creation of externally procured planned
    orders, and in the MRP during creation of stock transfer procurement
    proposals.
    Purchasing (MM-PUR)
    The BAdI runs as part of the source determination for purchase
    requisitions and during purchasing.
    Standard settings
    o   The Business Add-In is not active in the standard.
    o   The Business Add-In cannot be used multiple times.
    Example
    Sample coding is stored.
    Further notes
    Documentation on BAdI method GET_SUPPLYING_SL
    Documentation on BAdI method GET_PLIFZ
MZ

Transfer purchase requisitions to SRM 5.5 from ECC 6.0

We have an issue with our program BBP_EXTREQ_TRANS to copy our pur requisitions to SRM 5.5 (setup as Extended Classic scenario) but it blocks weekly. We cannot identify a root cause for this - sometimes there is no error log via tcode SLG1 or most recently, it is "Business partner cannot be changed" on a new purchase requisition.
Does anyone know what this error message is trying to tell us and how to solve this?
Edited by: Mike Yuen on Jan 21, 2010 8:33 AM

Hi,
Can you please check the ststus of Purchase Requisition in ECC whether it is released or block.This will not allow you to transfer the PR to SRM system.
Thanks,
AMIT

Stock Transfer Reservation in spite of Purchase Requisition in MRP run

Dear SAP gurus,
We are running MRP heuristic on the PP/DS and we have different results comparing our development and productive environments.
In our productive environment purchase requisitions are generated and in our development environment stock transfer reservations are generated as result of the MRP run.
Where can I check differences of configuration that would be causing this?
Thanks and BR
Mauricio

Mauricio,
I guess I was not clear in my suggestion, I apologize. Differences in T001W between ERP dev and prod will not necessarily generate your problem, differences in sourcing within APO between APO dev and APO prod will generate the differences. I only mentioned the vendor number because a transportation lane can exist 'source plant > destination plant', but also you can have a transportation lane 'vendor of source plant > destination plant' which would also have an impact on the type of req created.
Easier to check the sourcing, //PWBSRC1, mentioned earlier. Your dev system should contain no objects that relate to Stock Transport orders. You can delete the STO sourcing records within that transaction, which will also delete the material assignment to the Transportation lane. Hopefully you will then get the default external supply proposal, which is normally a Purchase req.
Also check for presence of quota arrangements //SCC_TQ1. Delete any that unnecessarily refer to an STO object.
Best Regards,
DB49

Data Transfer from Sales Order to Purchase Requisition

We are trying to transfer data from Sales Order to purchase requisition in an individual purchase scenario.
We want to copy value in KUWEV-KUNNR in Sales Order and paste in CMMDA-KUNNR on purchase requisiton.
So in user-exit "USEREXIT_MOVE_FIELD_TO_ME_REQ" on include "MV45AFZB" we added the following code:
FORM USEREXIT_MOVE_FIELD_TO_ME_REQ.
DATA:   BEGIN OF IT_VBEP OCCURS 0,
        VBELN LIKE VBEP-VBELN,
        BANFN LIKE VBEP-BANFN,
        KUNWE LIKE VEPVG-KUNWE,
        END OF IT_VBEP.
DATA: BEGIN OF TI_VBAK OCCURS 0.
        INCLUDE STRUCTURE IT_VBEP.
DATA: END OF TI_VBAK.
    SELECT A~VBELN   B~KUNWE
      INTO CORRESPONDING FIELDS OF TABLE IT_VBEP
    FROM VBAK AS A INNER JOIN VEPVG AS B
                          ON B~VBELN = A~VBELN
    WHERE A~AUART EQ 'PDIR'.
   LOOP AT EBKN.
       LOOP AT IT_VBEP.
            IF IT_VBEP-VBELN = EBKN-VBELN.
              IT_VBEP-BANFN = EBKN-BANFN.
            ENDIF.
            MODIFY IT_VBEP.
       ENDLOOP.
   ENDLOOP.
*Break-point.
SORT IT_VBEP BY vbeln.
LOOP AT IT_VBEP.
IF EBAN-BANFN = IT_VBEP-BANFN.
    EBAN-KUNNR = IT_VBEP-kunwe.
    MODIFY EBAN.
ENDIF.
ENDLOOP.
* Example
* EBAN-LIFNR = zzfield1.
* EBKN-KOSTL = zzfield2.
ENDFORM.
*eject
Right now it turns random values on the purchase requisition field.
Edited by: Carlos Salazar on Sep 15, 2010 5:19 PM
Moderator message: please use more descriptive subject lines from now on.
Edited by: Thomas Zloch on Sep 15, 2010 5:26 PM
Edited by: Carlos Salazar on Sep 15, 2010 5:30 PM

Hi,
Why are you using only the following line to read the VBEP table?
WHERE A~AUART EQ 'PDIR'.
Shouldn't you be using a sales document number or something more specific than document type?
Regards,    Andy

Issue on Number Range for MRP Purchase Requisition

Hi Gurus,
Please help me on the issue explained below.
We are already using SAP ECC 6.0 and SRM 5.0 and now we are implementing Plant Maintenance Module.As a result of this implementation ,we have created number of PR document types and assigned to unique number ranges in ECC. One of these document types has been maintained for MRP group for a material type in order to identify the MRP purchase requisitions created on the shortage of the materials for these material types.
This functionality is working fine. MRP run for the materials is picking the appropriate PR document but number range of the document is not the same what was assigned to the linked document type.Some other number series is getting picked by system .
There is setting under SPRO Consumption Based PlanningNumber RangesPurchase Requisitions
Here, number range assignment is against plant. This is the same number range which is being taken by system on running MRP. But the desired number range is the one which has been linked to PR document type.
If I change the number range above then number range for MRP PR in present system will get affected..
Can you please advise me on above so that PR generated on MRP run should have appropriate number range?
Thanks & Regards,
Niti

Hi,
As per my understanding, what you have mentioned above is exactly the way SAP is designed. Its SAP Standard behaviour.
But if you check your PR document type - no:range & the CBP no:range both will be same only since both refers to the same object.
Please check the PR document type that you have assigned in the CBP & its no:ranges.
Thanks & Regards,
Ram

Badi for purchase requisition and stock transfer order

Hi,
Could anybody please tell the BADI to update the item details (dates etc) in the 'Purchase requisition' and stock transfer orders.
I could find ME_PROCESS_REQ etc but could not locate the methods to modify the item level data.
Thanks & regards,
Ravish

Hi,
You can use the same badi which you found out.
ME_PROCESS_REQ.
In that there is a method process_item.
There you can get the line items of the PR.
Then in the POST method you can do the stock transfer .
In the check method also you can check the entire process of PR.
With Regards,
Sumodh.P

Stock transfer purchase requisition through project builder

Hi Friend's,
For transfering material from one plant to another plant we have to create stock transfer purchase requisition through project builder.
Can is it possible to create stock transfer purchase requisition through project builder which will have account assignment category as Q & item category U.
Thanks & Regards,
Sandeep

Hi Sam,
Thanx for your input.
We are dealing with project specific stocks & customer project scenario.
My requirement is that we having 2 plants. Projects are created in 1001 plant, same plant does the mfg. of FG items required for projects & 1002 plant manufactures MTS items which are required to mfg. project FG items as well as same items will bring into 1001 plant and then delivered to customer.
Here my clients want to create stock transfer pr through project builder to bring MTS items from 1002 plant to 1001 plant & then delivered to customer.
I think as you said this is not possible in std. sap to create stock transfer pr through project builder.
Thanx & Regards,
Sandeep
Edited by: Sandeep Theurkar on Mar 23, 2011 7:11 PM

Transfer attachment document from purchase Requisition(ME51n,ME52n) to Purc

Hi
How to do Transfer attachment document from purchase Requisition(ME51n,ME52n) to Purchase order(ME21n,ME23n).

Hi Muthu,
I understand that it is possible to bring attachments from ECC to the SRM system for the new release.
However, I have a slightly different question.
If I want to bring in requirements from a legacy system to SRM 7.0 system directly, what is the feasability of the same? If I have an attachment linked in the legacy system, then is it possible to bring it in SRM 7.0 system directly or will I be forced to route it to ECC 6.0 and then use the Plan Driven Procurement scenario for getting it into SRM?
Regards,
Abhilash

Transfer text from SRM SC to Purchase requisition

Hello all ,
I want to transfer SC item text to purchase requisition's item text. Is there any BADI to achieve this task ?
Thanks,
SM.

Hi,
In the standard,the SC item text is mapped to the item text in PR which is created in the R/3 backend.However if the transfer of text is not happening,you can implement the logic for trasnferring the SC item text to PR item text in the badi BBP_CREATE_REQ_BACK which contains the method FILL_REQ_INTERFACE.
BR,
Disha.
Do reward points for useful answers.

Budgeting through Internal Order - Issues in Purchase Requisition

Hi All,
I have posted the issue in ERP Matyerial Management Forum also, but since this has a lot to do with CO-Internal Order, so posting the same here.
Objective: We want to activate Commitment Update and budgeting for Capital purchases thrugh Internal Order. Budgeting is done for IO.
For the budgeting to get activated in Purchase requisition, Internal Order tagged to the Asset should be present/seen in the PR.
For PR with Account assignment Cat as 'A', I am not able to see the Internal order (mapped to the asset) in PR. The field 'Internal Order' in PR is coming BLANK despite the fact that the Asset used in the PR has been tagged to a valid Internal Order (of the Object Class - Investment, with Commitment update activated).
What other setting is missing?
Pls note the following:
1) Account assignment cat 'A' has been set to DISPLAY CO/PP order ( T code - OME9)
Issue is that this field in the PR is NOT getting populated at all.
2) Commitment management, Availability Control have also been activated in the system
. Internal Order status management has also been checked.
Any help in this respect will be highly appreciated
Thanks
Gayathri

Hi Gayatri,
when you are saying"budgeting for Capital purchases thrugh Internal Order",how do you use account assignment category "A"?
if your requirement is budgeting for capital purchases through IO then you should use account assignment category in respective PR.Automatically it will control budget/commitment wrt those internal orders.
Hope this helps you.
Ashok

Purchase Requisition transfer - Queue issue

Similar Messages

Maybe you are looking for