Purchase Requisition Work -item disappering from SAP inbox

Hi,
My users are forwarding  Purchase requisition work item from SAP inbox which is disappearing from agent inbox as well from forwarded inbox also.Please guide me
Abhijit Bagade

Hi Abhijit
Please refer to SAP not 1308276 .Which tell about the work items.
1308276 - WF: Forwarded work items are not displayed in the inbox
Hope this will solve your problem
Regards,
Nitin Amritkar

Similar Messages

  • Incomplete Approval Work Item Removed from Agent Inbox

    Dear All WF Experts,
    I noticed this strange scenario:
    Let say Agent A and Agent B are sent a work item.
    If Agent A has executed the work item in SBWP previously, the work item is removed from Agent B's inbox (And the status is changed to 'STARTED'). However, the work item is not processed yet.
    Is there anyway to make the work item stays in the inbox until either agent approved the work item?
    Thanks in all advances.
    Regards,
    YL

    Thanks Arghadip for your response. Sorry for my blunt question.
    Actually, the Agent A and Agent B are the approvers for PR approval by position (Agent A and Agent B are the users in the mentioned position).
    Thus, when a PR is raised, both Agent A and Agent B received the same PR work item.
    If Agent A execute the work item but does not release the PR, the work item still remains in Agent A's inbox as there is no terminating event. So, based on the logic, in Agent B's inbox, the work item should still be there because the work item is not fully processed yet (no terminating event takes place).
    But, now, from what I saw, as long as any of the responsible agents executed (started) the work item, even if they do not release it, the work item is removed from all other agents' inbox and only remain in the inbox of the agent who first executed the work item.
    I interpreted this as there is at least one agent already view the work item and know the existence of the PR to be approved, thus the other agents do not need to bother about the PR anymore. But, is my interpretation correct? And is there anyway to make the work item stay in the inbox of all approvers until there is one terminating event?
    Thank you so much.
    Regards,
    YL

  • Workflow - passing work item automatically from one inbox to the next one

    Hi,
       We have a pretty customized work flow and SAP is configured to start the workflow after creation of PO. For some POs created by a user, we want the POs / work item to be sent automatically  / by background job from that user's inbox to his /her manager's inbox for approval without manually executing the work item.
    I looked at the FM SWU_PROCESS_MANUEL_DECISION, but could be called only by dialog. I checked the transaction SWIA, but need manual input.
    We are in 4.6b, can anyone tell me how to do the same?
    BTW, I tried to create a custom FM based on above, but lots of issues on that as well.
    If I can change the workflow, all I want is, check the initiator and PO types then based on that either forward directly to next approver or just leave it in the inbox of the initiator so that the initiator can approve manually after verifying the PO.
    Regards,
    Sundar.

    Moderator note: As per comments, IA's answer was accepted as correct, thus marked accordingly.
    Please note that even if you found the answer before someone posted the same, it is still a good idea to mark an answer as correct:
    Firstly they did make the effort to help you, and - more importantly - it shows someone else reading this thread later on what the correct answer is.

  • Work item stucked on SAP inbox

    Hi Gurus,
    I have a problem on workflow items that are stucked on our approver's SAP inbox even after the PR or PO has already been approved/released. When I check the log, the status is still "In Process". This does not happen always and not for all our PR/PO docs.
    Can you help/guide me on where to look for the root cause so i'll know where to correct.
    Thanks,
    Marianne

    Hi MM,
    how is the PR/PO done for these workitems that are stuck?
    I mean was it sent to users SAP Inbox and he released it from his Inbox, or is it that though he got a workitem in his SAP Inbox, he released it thru ME54N/ME28N.
    Because in the later case, you have to define your WF such that if user directly releases them from the T-codes, it should terminate that WF so that it deletes from users SAP Inbox.
    Hope it helps.
    Aditya

  • Logical deletion of workitem from SAP INBOX

    Hello ,
    When we are trying to delete some work items related to generic
    decision task from SAP INBOX ,logically delte button is not visible and
    we searched in menu it is in display mode.
    The same button  is visble for other workitems related to error idocs .
    We have assigned the role to delete the work items of  type all.
    The button is visible for some type of tasks .
    We have some 30 to 40 workitems (decision task)  which are to be deleted .
    Can we use reports RSWWWIDE and RSWWHIDE without archiving of those?
    Kindly suggest us.
    Best Regards,
    Veena.

    Hi Veena,
    Please have a look at the 'Data Management guide' from service.sap.com/data-archiving, which tells you abou various options for deleting/archiving WI
    Also have a look at Note 49545.
    Hope this helps,
    Naveen

  • Deleting email from SAP inbox

    Hai All,
    I want to delete a  email from SAP inbox, without  logging into SAP with that person's userid.   Please let me know how to do it.
    Regards,
    H.K.Hayath Basha.

    Hi Hayath Basha ,
      You can do if you have a Workflow Administrator role and have access to Tcode : SWI5 (WorkLoad Analysis).
    Following is the procedure :
    1. Go to SWI5
    2. Provide the required parameters ;
       Resposibility :
         Type  US
         ID    User ID of whom you want to delete the WI.   
       Period :
          Choose To be processed by
    3. Execute the Report..
       Now you will see all the workitems in his inbox.
    4. Select the workitem you want to delete from the list.
    5. Double click on the workitem selected.
    6. select the menu  Goto -> Technical work item display
           You will be taken to Display workitem screen
    7. In Display workitem Screen  select the menu
           Edit -> Change
       Now you will be give a option to Delete Logically.
    8. Click on Delete Logically button to actually delete the mail from the SAP inbox.
    Let me know if this works.
    Thank you
    Srinivas

  • Open work items to keep in inbox

    Hi Experts,
    I am executing work item from sap inbox  it will calls the z modulepool screen. Hear I have 3 options. Approve, reject and cancel.
    If I want press cancel I want keep the work item in inbox in same user.
    For that what can I do .
    If I use the FM u2026SAP_WAPI_PUT_BACK_WORKITEM how do get the work item ID into z screen (zprog).
    Or if I redesign the workflow with loop to same use. How can set the loop.
    Please suggest.

    You can pass the workitem through binding and execute the FM you have mentioned.
    &_WORKINGWI.WORK ITEM ID&.
    If this container is not available you can get the Instance Id which you will surely get and go to
    SWWWIHEAD Table
    Provide the Instance Id as TOP_WI_ID
    WI_RH_TASK will be the activity task that calls module pool
    WI_STAT as <> COMPLETED
    Thanks
    Arghadip

  • Purchase requisition with Item Category – L creation via Maintenance orders (Plant Maintenance)

    Hi Guru’s,
    I have a scenario where purchase requisition with Item Category – L (subcontract External) for Repair items (Storeroom Process) need to get generated with Item category-L.This requirement is to MAP in my system.
    I am aware that purchase requisition can be created with reference to maintenance orders.
    Can anybody through some light on the integration between PM and MM.
    If creation of purchase requisition is possible via maintenance orders then please explain me with detailed steps both configurations and master data so that I can able to replicate the same as per business requirement.
    I look forward to the expert’s response.
    Regards,
    Kumar

    Hi Kumar.S
    You have to installed DIMP 6.0, and activated the business function Refurbishment and Subcontracting (LOG_EAM_ROTSUB) and Serial Numbers in Purchasing (LOG_MM_SERNO) .
    Please check the below link:
    http://scn.sap.com/thread/1956895
    Hope it will help you to resolve your issue.
    Regards,
    Ritesh

  • Delete purchase requisition with item category Subcontracting

    Hi all,
    I need to delete a purchase requisition with item category = L (subcontracting).
    I am using already BAPI_REQUISITION_DELETE to delete other purchase requisitions but for the subcontracting it doest not work. In fact in the BAPI code you can see:
    Requisitions with dependent reservations won't be processed
        IF xeban-pstyp EQ 3 AND xeban-rsnum NE space.
    So I am looking for other BAPI but I don't find any to delete this kind of requisitions. Do you know any way to do that or I have to do a batch input?
    Thx,
    Manel

    Hi Manel,
    I am using BAPI_PO_CHANGE to set EBAN_EBAKZ, however in most of the cases error thrown as "Instance PO Number of object type  could not be changed".
    Could you please help on this?
    Thanks,
    Murali

  • How to read a mail from sap inbox thru abap code?

    how to read a mail from sap INBOX thru abap code? can anyone tell me the technical approach? I NEED TO READ A MAIL and then need to pass the parameters to a bapi.
    Message was edited by:
            shahid mohammed syed

    Hi SSM,
    Did you manage to have your program working? I also have same requirement. I tried standard FM and BAPI but I always encounter authorization error when I tried accessing other user's mail. Thanks.
    Regards,
    Ryan

  • Unable to delete the Purchase Requisition line item

    Hello MM sapperu2019s,
    I am unable to delete one of the line item in Purchase Requisition. Please let me know how to delete this Purchase Requisition line item.
    When I tried to delete the line item in ME52N the delete button is gryed out hence I could not able to do it.
    The purchase requirement has reference of network in the account assignment.
    Please let me know if you need more clarification.
    Cheers,
    Kumar.S

    Hi,
    You are experiencing the stnadrad behavior
    When the Preq is automatically created from either
    a production, plant maintenance, or network, order, what you can change
    in the PReq is very limited.
    This is to ensure no conflicts arises between the PReq and the source
    application of the PReq (be it PP, PM/CS or PS).
    The technical explanation is due to the recorded value in EBAN-ESTKZ
    (Creation indicator).  The value stored here (automatically by the
    system) controls what you can or can't change in ME52/N.
    We cannot delete the line item in this case
    regards,
    Lalita

  • Sending mail from sap Inbox to outlook

    Hi All,
    Iam new to SAP workflow. Here I need to send the mail from SAP Inbox to Outlook for high priority keeping red flag as icon.
    can anyone tell me how to set up this and go ahead to start.
    Thanks
    Kumar

    IF I understand you correctly, you want to send a mail to Outlook (external email address) as a step in Workflow.
    If you are on Release 6.20 or above the following solution will work. I do not remember what is available in earlier releases.
    1) Define a multiline element based on SOXNA-FULLNAME to hold the email addresses. How you populate this element with the addresses depends on your requirements.
    2) Insert a Send Mail step in the workflow.
    3) In the Mail Tab, Select 'U' as Recipient Type.
    Assign the Multi Line element defined in Step 1 to E-Mail Address.
    4) Define the Subject and the body as needed.
    Please note that you should have External mail sending from SAP enabled and a batch job that runs periodically to push the mail.
    Cheers,
    Ramki Maley.

  • How can i autoforward that mail from SAP INBOX to the outlook

    Hi ,
    My Requirement is that,
    I have to send an email to outlook, whenever PO Created in SRM System
    I have created  custom workflow, i have added a sendmailtask step, i given the SAP userid to send SAP Mail to the user.
    It is sending SAP Mail to the User to his inbox perfectly.
    Now, how can i autoforward that mail from SAP INBOX to the outlook. This is has to work for all users.
    Please give some suggestions. ot it can be achived any other way.
    Note: This is Email Message not a workitem.
    I have doubt that RSWW program will work only for workitems.*
    Thanks & Regards,
    Suresh.

    Hi ST,
    what I understand from your requirement is that you are able to send messages using SendMail Step to SAP Inbox and now you want it to be sent to users Outlook.
    Here you need to create a container which would store users email address of Outlook (which would be stored in SU01 or in a ztable), use this container in your Send Mail step and in the Recepient Type as email.
    Hope it helps.
    Aditya

  • MM: Purchase requisition line Items - How many line items can we use

    Hi all,
    1. Purchase requisition Line items  (How many line items can we use?), is there any restrictions.
    2. While creating PO with only one tax code for the related PR to input Tax code (without selecting  line Items).
    Regards,
    Sudheer

    Hi
    There is no limitation for number of items in PR.
    Tax code is always applicable for individual item only.It cannot be selected form the whole PO.
    Regards
    Dev

  • How To Restrict Users To Only Create Purchase Requisitions with Item Catalog?

    Hi, everyone 
    Please help me, 
    How To Restrict Users To Only Create Purchase Requisitions with Item Catalog? is it possible? 
    Regards,   Manuel

    Hi Steenie Norman
    First click on the text item ---> Tools ---> Property Pallete ---->
    and change the Keyboard State to Local Only also this Depend in your OS
    hope this useful ....
    Regards
    Mohammed

Maybe you are looking for