Purchased a 2012 Chevy truck and want to play my older i pod through the radio system. when I plug the i pod in the USB port the radio displays that it does not recognize the divece. What can I do to play the i pod on the truck radio?
Need help getting 2012 Chevy truck radio system to recognize my older i pod when I plug it into the USB port. Can anyone give me advice? Thanks
First, check the manual or specification online, to see if your iPod model is supported. That USB port may be for plugging in a generic USB flash drive with song files on it. Or it may only support more recent iPods.
Also, if it has an auxiliary audio input port (it would look like the headphones jack on iPod), you can use something like this to connect your iPod
http://www.amazon.com/Monster-iCable-Player-Auxiliary-Input/dp/B002AR5XIK
and just use your iPod to "play through" the car audio system.
Similar Messages
-
when i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me
I would first try unplugging All the USB devices plugged into your computer, and then plug back in just the iPhone and see if that is recognized. Also, do you have the latest version of iTunes for Windows installed on your PC, as you need to?
Hope this helps -
By updating to IOS 6.1 something went wrong. The rsult is that I have picture of USB cable and Itunes on my Iphone and the PC does not recognize it. What can I do ? Pøease Help. My Iphone is dead !
you may have to do this a couple of times http://support.apple.com/kb/HT1808
-
I have an ipod touch and Itunes does not recognize device. What can I do?
I have an ipod touch and Itunes does not recognize device. What can I do?
See:
iOS: Device not recognized in iTunes for Windows -
I dropped my iphone 4 pretty hard, it cracked (although it already had a few cracks in it) and now the screen is black but sometimes has a background light turn on and then off. Holding the home button and off button at the same time do not work. When I plug it in to charge or to the computer it vibrates every 10 seconds and itunes does not seem to recognize it. It gets really really hot when plugged in (which I don't think is normal). icloud does not recognize it under "find my iphone" either. What could the problem be? I am wondering if dropping it dislodged something inside. if so, what did I dislodge and is it possible to fix this myself?
ThanksSounds like that drop was a critical one, my friend. I would make an appointment at your nearest Apple Retail Store, because you're going to need a replacement. Also as a side note: the reason that the charger is making the phone vibrate over and over is because there is a disconnect somewhere in the charge port of the phone, causing it to plug in and out over and over.
-
Is there another way to convert the .orf files that are not being recognized ?
I used a card reader.
The Olympus Viewer software reads the raw images just fine.
ThanksI do not see your camera on the list of supported cameras, sorry.
Apple - Aperture - Technical Specifications - RAW Support
The Olympus Viewer software reads the raw images just fine.
Does this program have an otion to export the photos in a different format? Then it would be the best way to convert the image files to a supported format.
Or check, if Adobe's free DNG converter supports your camera: Adobe - Adobe Camera Raw and DNG Converter : For Macintosh
Aperture can import DNG files with the right settings.
You might also simply import raw+jpeg and work with the jpegs as original files, while you are waiting for the raw support to be released.
Regards
Léonie -
i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please
Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/ -
I have an iphone 5s and when I make a playlist on itunes for music videos and sync my iphone the playlist does not show up. What can I do to fix the problem?
Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
http://www.apple.com/itunes/download/ -
hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?
See
http://support.apple.com/kb/TS4215 -
My iPod touch is frozen and asking me to connect to iTunes and when I do connect to iTunes the iPod does not show up. What can I do?
Try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Last, try restoring on another computer. -
After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this? I have tried uninstalling and reinstalling itunes. I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?
The problem is with version 10.4.1. I had to reload 10.3 to get it to work. The recommendation from a previous poster worked for me. Here was their list of steps:
Go to Control Panel>Programs>Uninstall
2. Uninstall the following Apple programs in the following order:
a. iTunes
b. QuickTime
c. Apple Software Update
d. Apple Mobile Devices Support
e. Bonjour
f. Apple Appllcation Support
3. Reboot PC
4. Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes. To correct this:
5. Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
6. Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
7. Copy and Paste this file back into the iTunes folder
8. Rename this "iTunes Library (date).itl" file by removing the date. It should say "iTunes Library.itl"
9. Reboot PC -
after a 4 week absence from I Mac 10.7.4 it does not have sound anymore, does not recognize my voice nor can it read any stick. what can I do?
Mac computers: Progress bar appears after waking from sleep
slow wake from sleep OS x 10.9.4 -
Hello ! The screen of my ipod is white and my coputer does not reconize it ! What can I do ?
Try the white-screen topic here.
iPod touch: Hardware troubleshooting
If not successful, let the battery fully drain and then after charging for an hour try the applicible part of the article. -
My Mac is blocked and does not accept my pasword, what can i do, to unblock it?
Thanks for your replies.
I originally posted because I thought either I was doing something stupid, or that there was some little known setting or control that might sort things out.
When I called support, they tried 'little known setting or control' route, but it turned out that the ipad was definitely faulty and they have offered a replacement.
If I can help others having the same issue, I would say call support first before returning as it is possible to reset it if it is a software problem, rather than a fault with the hardware. -
Why do I keep getting mails from iCloud over and over again? It seems that iCloud does not recognize that the emails were previously downloaded.
Does the iPhone NOT tell iTunes if you've played a track or not?
Yes, but the entire track must be listened to - until the track ends.
A song is not marked as played until the song has completed and the iPod starts playing the next song. The song must be played until the very end, and the same with a podcast.
Maybe you are looking for
-
Best method to sync 2 iPhones, access same library, but different apps
My wife and I just got 2 iPhones 16GB 3GS. We currently have just 1 iTunes account (don't want a second one) and store all music on our desktop computer. Most of the music is files from CD's that I've had on the computer for way longer than we've had
-
What's a polymorphic terminal and why can't I change the colour of an LED?
Hi, I've written a small vi to experiment with changing the colour of an LED from the front panel by the user. (See attached.) I've created a property node for the LED indicator and selected the 'Colors[4]' property. I've then selected the 0th elemen
-
Data Transfer Problem Getting Status 51
Hi Experts, I have two logical systems namely cln 000 and t90clnt090 assigned to clients 000 and 800 respectively, and i am transferring data from 800 to 000. My message type is matmas and i am tranferring data using tcode bd10,but while i am transfe
-
How do I create a run-in paragraph in 7.0? Thanks!
-
Add item "save page as" to the tool bar line
I want to add the item "save page as' [CTRL+S] to the toolbar line. If I right click the line then click customize that function is not listed in the Customize Toolbar box. Where can I find it again so I can add it as I did with the printer icon?