Purchased apps didn't get updates and not appear in the cloud

Hello,
Some apps did not added to my Purchased Apps. Most of this are free apps like Facebook, Flipboard, Popular Science, Wired, Imdb etc...
So when this apps get an update in the store, symbol appears next to the Application tab on iTunes, mark that there is an available update. But when I click on check for updates it says there is no available updates for my account.
At this point I start deleting apps from my library until the symbol mark disappear. Then I can know which app makes the problem and purchase it again. But still it doesn't added to my Purchased Apps, and it doesn't get a "Downloaded" mark on the store next to it or appear in the cloud.
It's really annoying. I want to get those apps on my cloud.
I would appreciate your help

Please, any one can help?

Similar Messages

Cannot update or purchase apps after ios7, get message "could not be purchased at this time. please try again later."

Cannot update or purchase apps after ios7, get message "could not be purchased at this time. please try again later."

I have the exact same issue , with no answers or help available !

The signal in my area 20723, Laurel MD is lucky to get 1X and not just in the home. Network team consider the area.

Laurel, MD 20723 has a very weak signal if any at all. I would really like to see VZW Network team to consider the area. It's the entire area and not just in the home. Laurel is where one of Verizon's main facilities is located and should be a great surrounding area to set a good example. The coverage map is not accurate. It shows service, but it really isn't covered. I know, because I live there. Verizon, please consider expanding your great service in this area. Thank you.

This didn't start happening, it has always been the case in this area. My neighbors and friends, that are also VZW customers, who have lived here longer have confirmed this as well. A Verizon Fios technicnan come to do repairs and could not get his 4G LTE tablet to access data to run diagnostics from my property. He had to drive down the street to get some minimal connectivity and sit there for 30 minutes to access the diagnostics screens. Inside my house, my voice signal ranges from roaming - 2 bars and no data (1x if I'm lucky). I am plagued with drooped calls, missed calls and missed SMS texts, which forced me to get home phone line. My wife has a work AT&T blackberry and it has good signal strength. Friends with Sprint and T-Mobile who come over experience same weak signals. Looks like AT&T is the clear winner in this area. Once my wife's contract is up, we will be switching. Hate to leave VZW but have no choice.

Looking at getting Lightroom but not interested in the cloud monthly payments. What are my options and is lightroom 4 still available to purchase from Adobe?

I'm new to Adobe so I know absolutely nothing.

LR 4 is not available for sale from Adobe. LR4 is the last version that will run on OSX 10.6.8+, Windows XP and Windows Vista. You may be able to find it still for sale on Amazon, but be careful of scammers that aren’t Adobe authorized resellers and are probably selling pirated software that won’t be able to be licensed. Also don’t buy the $80 upgrade version when you’ll need the $120 full version. The upgrade and full versions function the same, but the upgrade version requires having a previous version’s serial number in addition to the current version’s serial number to be licensed. Since you’re just starting out with LR you wouldn’t have a previous version serial number.
LR 5 is available for purchase both with and without paying a subscription. LR 5 requires OSX 10.7+ or Windows 7+.
If you are interested in LR 5.x without paying a subscription then download the LR 5.6 update from here, and run it in trial mode for up to 30 days, to see if it’ll work on your computer and with your workflow:
http://www.adobe.com/downloads/updates
For completeness, here is Subscription LR5 which includes PS-CC for $10/month (U.S.):
https://creative.adobe.com/plans/photography
The subscription version is the only one that has LR Mobile sync capabilities.

I just downloaded an app through itunes but it does not appear in the 'purchased' list on my ipad

purchased app not appearing on ipad

Before you purchased the app in iTunes, did you have Settings > iTunes & App Store > [Automatic Downloads] Apps = "On"?
My guess is you did not.

Why my purchased apps on appstore of my iphone not appears?

I try to access to my apps on my iphone but not appears.

Are you signed in with the same Apple ID?

Apps downloaded with CC packager do not appear in the cc apps manager

I downloaded the apps for my team but now all the apps doenloaded do not appear in my cc manager so I dont know when updates are available

Hi cdesign5512,
The possible reason for this behaviour could be the language in the CC desktop preference could be different than that of the installed Apps. Please open CC desktop/Go to preferences/Select apps and check for the app language. Set it to the same language as that of the installed programs.
Regards,
Romit Sinha

I install apps from iTunes but they're not appearing on the iTouch.

I've downloaded several iTouch 4th gen compatible apps but a few of them won't appear on the iTouch. When I update from iTunes it shows them on my device but they're not actually there. I'm using the latest software update so that isn't the issue. Any ideas?

That's EXACTLY what was wrong. I had an age restriction for my daughter's apps and the missing ones were outside the parameters. Thanks for your help!

Bluetooth not working and not appearing in the devices manager

My bluetooth suddenly is not working anymore and i can't see it in the device manager.
I tried to reinstall the drivers but the problem persist. I have one strange USB problem happening too at the device manager, and it just appeared after the bluetooth problem. How can I solve it? One image of the problem is attached!

Try to update the IRST driver, and see if it helps the problem.
http://download.msi.com/nb_drivers/imsm/irst_intel_intel mobile express chipset_13.2.4.1000_0x71913026_81700.zip

Characters ő and ű not appearing in the print of smartform.

Hi All,
There is a requirement where hungarian text needs to get printed in a smartform. The two characters ű and ő appear as # when the printout is taken from the smartform.The text that needs to be printed is actually hardcoded in the driver program and passed in the structure to the smartform.
Could it be like there is a printer problem or what could be wrong?
Thanks in advance for the help!
Regards,
Gowthami SK

Hi,
The # character usually means that the character is not supported by the character set of the device type used to create the spool and print, Try creating a spool and print via windows and unicode device type SWINCF.
Regards,
Aidan

Songs purchased are not appearing in the cloud.

I purchased several songs after turning on iCloud. The recently purchased songs are not in the cloud. I can't figure out why.

I'm having a similar situation with my library. Some suggested that reinstalling itunes helps but thats not the case. there is something wrong with the Icloud and not many support agents are helping out with the situation. The best suggestion is that you try to find away to contact apple themselves.

Is there a way to BULK COLLECT with FOR UPDATE and not lock ALL the rows?

Currently, we fetch a cursor on a few million rows using BULK COLLECT.
In a FORALL loop, we update the rows.
What is happening now, is that we run this procedure at the same time, and there is another session running a MERGE statement on the same table, and a DEADLOCK is created between them.
I'd like to add to the cursor the FOR UPDATE clause, but from what i've read,
it seems that this will cause ALL the rows in the cursor to become locked.
This is a problem, as the other session is running MERGE statements on the table every few seconds, and I don't want it to fail with ORA-0054 (resource busy).
What I would like to know is if there is a way, that only the rows in the
current bulk will be locked, and all the other rows will be free for updates.
To reproduce this problem:
1. Create test table:
create table TEST_TAB
ID1 VARCHAR2(20),
ID2 VARCHAR2(30),
LAST_MODIFIED DATE
2. Add rows to test table:
insert into TEST_TAB (ID1, ID2, LAST_MODIFIED)
values ('416208000770698', '336015000385349', to_date('15-11-2009 07:14:56', 'dd-mm-yyyy hh24:mi:ss'));
insert into TEST_TAB (ID1, ID2, LAST_MODIFIED)
values ('208104922058401', '336015000385349', to_date('15-11-2009 07:11:15', 'dd-mm-yyyy hh24:mi:ss'));
insert into TEST_TAB (ID1, ID2, LAST_MODIFIED)
values ('208104000385349', '336015000385349', to_date('15-11-2009 07:15:13', 'dd-mm-yyyy hh24:mi:ss'));
3. Create test procedure:
CREATE OR REPLACE PROCEDURE TEST_PROC IS
TYPE id1_typ is table of TEST_TAB.ID1%TYPE;
TYPE id2_typ is table of TEST_TAB.ID2%TYPE;
id1_arr id1_typ;
id2_arr id2_typ;
CURSOR My_Crs IS
SELECT ID1, ID2
FROM TEST_TAB
WHERE ID2 = '336015000385349'
FOR UPDATE;
BEGIN
OPEN My_Crs;
LOOP
FETCH My_Crs bulk collect
INTO id1_arr, id2_arr LIMIT 1;
Forall i in 1 .. id1_arr.COUNT
UPDATE TEST_TAB
SET LAST_MODIFIED = SYSDATE
where ID2 = id2_arr(i)
and ID1 = id1_arr(i);
dbms_lock.sleep(15);
EXIT WHEN My_Crs%NOTFOUND;
END LOOP;
CLOSE My_Crs;
COMMIT;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20000,
'Test Update ' || SQLCODE || ' ' || SQLERRM);
END TEST_PROC;
4. Create another procedure to check if table rows are locked:
create or replace procedure check_record_locked(p_id in TEST_TAB.ID1%type) is
cursor c is
select 'dummy'
from TEST_TAB
WHERE ID2 = '336015000385349'
and ID1 = p_id
for update nowait;
e_resource_busy exception;
pragma exception_init(e_resource_busy, -54);
begin
open c;
close c;
dbms_output.put_line('Record ' || to_char(p_id) || ' is not locked.');
rollback;
exception
when e_resource_busy then
dbms_output.put_line('Record ' || to_char(p_id) || ' is locked.');
end check_record_locked;
5. in one session, run the procedure TEST_PROC.
6. While it's running, in another session, run this block:
begin
check_record_locked('208104922058401');
check_record_locked('416208000770698');
check_record_locked('208104000385349');
end;
7. you will see that all records are identified as locked.
Is there a way that only 1 row will be locked, and the other 2 will be unlocked?
Thanks,
Yoni.

I don't have database access on weekends (look at it as a template)
suppose you
create table help_iot
(bucket number,
id1    varchar2(20),
constraint help_iot_pk primary key (bucket,id1)
organization index;not very sure about the create table syntax above.
declare
maximal_bucket number := 10000; -- will update few hundred rows at a time if you must update few million rows
the_sysdate date := sysdate;
begin
truncate table help_iot;
insert into help_iot
select ntile(maximal_bucket) over (order by id1) bucket,id1
    from test_tab
   where id2 = '336015000385349';
for i in 1 .. maximal_bucket
loop
    select id1,id2,last_modified
      from test_tab
     where id2 = '336015000385349'
       and id1 in (select id1
                     from help_iot
                    where bucket = i
       for update of last_modified;
    update test_tab
       set last_modified = the_sysdate
     where id2 = '336015000385349'
       and id1 in (select id1
                     from help_iot
                    where bucket = i
    commit;
    dbms_lock.sleep(15);
end loop;
end;Regards
Etbin
introduced the_sysdate if last_modified must be the same for all updated rows
Edited by: Etbin on 29.11.2009 16:48

Is there a way to set the iPad Mail app to only get email manually, not automatically when the app is opened?

I usually don't use my iPad Mail app to check my email, but sometimes I go into the Mail app just to send a test email or check an attachment in the Sent folder or some such, and every time I enter the app, Mail checks for new email. Which means it ends up downloading five hundred emails or so if I haven't been to the app in a while. Annoying! I haven't been able to find a setting that will stop Mail from checking for new Mail when I go into the app; is there such a setting?

You can turn mail off in the settings but then you can't use it for anything, including the "test" that you want to perform.
Settings>Mail, Contacts, Calendars>Account Name>Mail>Off. That totally turns off the mail account.
As long as mail is turned on and you launch the app, it will look for an download new mail.

I have purchased Line Sticker App, iTunes already took money from credit card $2.49 AUD. But I didn't get any and also nothing show on my Line purchased box.

I have purchased Line Sticker App, iTunes already took money from credit card $2.49 AUD. But I didn't get any and also nothing show on my Line purchased box.

If you've been charged for the item but not received it then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Hi, I've been playing Smurf's village for a year now and just last week, i tried to get into the app but it keeps rejecting and goes back to the main page. Is there any reason for this? I've been updating the app everytime and now it's not letting me in

Hi, I've been playing Smurf's village for a year now and just last week, i tried to get into the app but it keeps rejecting and goes back to the main page. Is there any reason for this? I've been updating the app everytime and now it's not letting me in. Pls advise. Tq

Reset the device, restart the device, try downloading any other app.
All of these are basic steps that could have been found by a simple search of the forums as a resolution for the issue.

Purchased apps didn't get updates and not appear in the cloud

Similar Messages

Maybe you are looking for