Purchased DVD "NOT PERMITTED"?
DVD player works with other discs. Tried to play new purchased dvd FROZEN. Player recognizes it as FROZEN but says NOT PERMITTED in all functions. It works on my friends PC. Removed and reinstalled several times. Played other purchased DVDs OK but not this one.
This is the same person asking the question. I have figured out that the DVD works fine on my computer, it is only when I connect it via Airplay to my TV with my Apple TV that i get the message it can't move the video to the screen.
Any help would be appreciated.
Thanks,
Similar Messages
-
Apple dvd player says dvd "not permitted"
I am using my new apple USB Superdrive for the first time on a new Macbook Pro with the Zumba dvd which was purchased in the US and the screen says "not permitted"
I second this. I bought a Mac Mini with the plan of using it as a media center attached to my television, and in the end never use it for video because the picture quality is so bad. I explored other software options... VLC player namely, and while it gave you more tweaking options, none of them made a real difference. Playback quality is just cruddy.
It is interesting, though, that HD material played fullscreen through quicktime player does look quite good and comparable to my HD Directv feed (though I guess that's not saying much...), whether its interlaced or progressive source.
Has anyone compared playback of the same material directly from DVD player vs. played through AppleTV? -
"Not permitted" access to DVD menu once DVD starts playing --Mac DVD player
Hi,
DVD works fine on standalone DVD player, but when played on an internal Mac DVD player, it won't allow me to stop the disc and go to the menu once it has started playing. It says "Not Permitted." I've tried a couple different macs.
I made my video in FCP5 with chapters and exported as MPEG2 via compressor to DSP 3.0.2. I need the chapters to work correctly on a Mac DVD player as it is an instructional video which will accompany all the Mac Media Carts that have been purchased for our school district -- it has to play correctly on the included laptops.
Anyone have any ideas?When you press STOP in the DVD Player, the DVD stops, no longer running. That's the reason that when you try to press MENU appears the Not Permited message: no way to go to the menu because the DVD is not playing.
That's the normal behaviour of the DVD Player. I think that's the way that thinks works in every DVD player . . . "I think". -
Can you put purchased DVD movies that you have on your ipod? what about recorded DVD's that you have? and if you can, how? ex) i bought the DVD Tangeled for my daughter and wanted to put it on the ipod.. also she has a disney DVD movie Brother Bear, which was not bought at a store but it is recorded onto a DVD. can we put that on ipod?
and if so..... how????
Thanks in advance for your help.
NaeNae'"Can you put purchased DVD movies that you have on your ipod? "
No. breaking the encryption in order to copy them illegal.
" what about recorded DVD's that you have? "
Add them to itunes.
http://support.apple.com/kb/HT1473 -
The macbook reads a disc, and opens up DVD player but then says not permitted when I hit play, or any other button. Sometimes the initial music plays, but the screen remains black and then it all stops. These are shop bought DVD's that have previously worked on here, and work in DVD players, but have suddenly stopped. The computer is much older than the12 months warantee so I hope there is an easy fix? Thankyou!
Three things you can try:
1. Clean the superdrive with a proprietory CD/DVD lens cleaner that uses tiny brushes.
2. Perform an SMC reset:
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964 and
http://support.apple.com/kb/HT1237?viewlocale=en_US
Resetting your Mac's PRAM and NVRAM:
http://support.apple.com/kb/ht1379
If you are using a Wireless Keyboard:
http://support.apple.com/kb/TS3273
3. Try the free DVD player VLC:
http://www.videolan.org/vlc/
which performs better than the built-in DVD Player. -
Hello Apple and the iTunes Windows PC users community.
I am trying to sync films that I have converted from purchased DVD to mp4 format locally, not purchases from the online store. The mp4s all appear and play successfully in my iTunes application but will not sync across to the iPod film library folder.
For your information: I am using iTunes 11.1.3.8 on a Windows 7 64bit machine with 500GB hard disk and 8GB of Ram in the UK.
I have restored the iPod classic 160GB three times now to see if it was a hardware problem with no joy. Each time all the music restores properly as do the podcasts and all the items in TV programmes all appear to sync and work fine.
I have also tried to copy films into the TV Programmes to get around it with no joy. They always go to the films section to start with. It is just the Films library that does not sync - all others work perfectly. As a last resort I have uninstalled and re-installed iTunes with no joy either.
I am technically savvy and have gone through the itunes and ipod settings but nothing appears to make a difference - This is the first time I have had to post here as I can usually solve the majority of the ipod anomilies but this one has me flummoxed.
Has the film encoding type changed in the newest itunes update? - Has this happened to anybody else and is it a hardware, software, or operating system problem.Having uninstalled the current version 11.1.3.8 and loaded and older version of iTunes 10.7.0.21 I can now categorically confirm that the newest update seems to be causing the problem as the films and TV Programmes are syncing perfectly on this older version.
If you are going to do this please dont forget to remove the ' iTunes Library.itl' file as this stops the older versions from running as I've just found out -
Purchase Orders_ Multiple projects not permitted on a single purchase order
Hi Guru
Please assist:
We are using the MM & PS for Purchase Requisition, the Account Assignment N and the buyers created PO with different Network numbers on one Purchase Order,
I want to delete the purchase order and i am getting the message Multiple projects not permitted on a single purchase order
How do i delete this PO, i have tried the delivery complete and final invoice tick its not working
Regards
SusanThe Apple Configurator tool robbed my school of @ 60×4 apps.
Here's my mistake. I bought all the apps needed for the whole school in one lump sum. i.e. 350 copies of Pages. Then happily went to Configurator and loaded the spreadsheet. Installed on all the student iPads. Then need the remaining licenses to gift to the teachers and @ 30 for the cart. NOPE! Once they are loaded in to Configurator you can never get them back. Apple said, “sorry”.
I did this for the iWorks suite, iPhoto, & neu.Annotate before I realized what was happening.
This is what to do, in short. From the VPP account, buy the number needed for exactly what you need, just make sure, it's over 20, even if you only need 11, 20 copies is cheaper than 11 because they are half off at 20 or more. Get the spreadsheet generated by the VPP site for the 20 then buy for the next cart or site, it will generate a new spreadsheet of 20 you can give to the computer and its copy of Configurator.
https://schoolipads.wordpress.com/2013/03/23/vpp-configurator-multiple-carts-or- locations/ -
First Play "Not Permitted" on Apple DVD player
I have some duplicated DVD-Rs of a project, and the client ha reported a disutrbing error. I've been told that on several different Macs running OS 10.2 - 10.4, not only does the disc not auto launch DVD player and not auto-play the first play menu, but when the user presses play on the floating control, they get a "Not Permitted" message. The user reported that they were able to choose "open Video_TS" and navigate to the VIDEO_TS folder on the disc, at which point they were able to get the disc to play.
The disc include a significant amount of content on the ROM sector of the disc, including an autorun and an .exe file for windows users. However, I can't see how the presence of these ROM files could interfere with the operation of DVD Player and the VIDEO_TS folder on the disc.
Furthermore, the duplication master for this disc has been formatted directly from DVD studio as a standrd DVD volume - no Toast burn, hybrid volume formatting, anything like that.
Upon inspection I discovered that my authoring assistant had specified a pre-script on the first play menu. I try never to use pre-scripts for anything, as I have found the way DVD studio handles them to be unreliable. However, I suspect this pre-script on the first play menu as the culprit in this problematic behavior, and have removed it.
The problem consists in that I did not experience this problem with any of the DVD-R checkdiscs I burned from DVD studio, unti the discs were duplicated. We'll be doing a full-scale replication run as the next step. Since I am not able to reproduce this problem on discs I burn here, I'd like find a way to know I have fixed the problem.
My question is, has anyone else ever encountered issues with their first-play menu throwing up this "not permitted" condition in Apple DVD Player? Has anyone ever found a connection between this issue and pre-scripts, or between this issue and any ROM files?
I suspect that DVD studio's pre-scripts are "simulated" or translated through the abstratction layer of DVD studio in a way that allows them to be outside the DVD spec, or perhaps there are other ways DVD studio might be using the pre-command on a menu, such as when you specify a button selection for a menu, that use the menu pre-command, and override the pre-script you might have spcified for the menu.I've seen it on replicated masters when a dvd-r master was used and not all regions were selected as ok to play. DSP doesn't 'check' region 7 by default... its best to use a region all project and .img files, not VIDEO_TS builds to the HD.
How were the discs duplicated though? That is probably the cause of the problem, not the pre-Script. Maybe a 'Data' disc was burnt and not a DVD-Video type option...
-jake -
My 10.6.8 macbook pro's DVD player won't play a movie from Netflix. The DVD does play on a 10.5 mb pro. So DVD is ok. Message says "not permitted" when I click play. Is there a compatibility issue? Or something else?
Hello:
This is not an area I have much experience in......I rarely insert DVDs and I have never had a similar problem.
When the DVD is in the drive (and DVD players is open) click on File>get disk info.
Barry -
Purchased DVD in US for Cdn viewing. Digital download will not work in Cda or US? please help with new Digital code that will work
You will need to contact the movie studio that produced the DVD and ask if they can issue you a new code valid for Canada. Apple cannot help you, and everyone here in these forums is just a fellow user.
Regards. -
I am trying to play a DVD on my MacBook Pro 10.9.5 and it says Not Permitted with a circle and line through it. I got these DVDs burned at Costco from a video tape and have been able to play them in other devices. Here is a a screenshot of the contents of the DVD.
This is the same person asking the question. I have figured out that the DVD works fine on my computer, it is only when I connect it via Airplay to my TV with my Apple TV that i get the message it can't move the video to the screen.
Any help would be appreciated.
Thanks, -
[webgl] sluggish performance ( /dev/nvidia0 Operation not permitted )
We (folks on #archlinux already tried helping) have been at this for hours now... no solution found yet.
summary: webgl works but performance is sluggish(20 to 30fps) which makes me assume it's falling back to software rendering for some unknown reason
already tried many things: vmalloc kernel parameters, irq control left to bios/archlinux, being in the video group, not being in the video group, having an xorg.conf, not having an xorg.conf, different AGP aperture sizes in BIOS, regular gl performance is normal (60 fps (capped to display refresh) in glxgears), only webgl slugs, card (GT 7600 256MB VRAM) should support the required shader language version for webgl (and webgl performance is only sluggish in linux... so I think it must be a configuration issue on some driver/kernel/browser setting?)
Different browsers show different messages when started from the console but I don't know what to make of those and googling them did not reveal any solutions so far either.
browsers tested: firefox, google-chrome(from AUR), chromium
window managers tested: enlightenment, fluxbox
kernel: linux-lts
driver: nvidia-304xx-lts (can not use Nouveau as Nouveau keeps locking up the GPU)
It's a fresh archlinux installation (Ubuntu had the same performance problem btw in case that might be useful to know for looking for the cause).
Everything I tried so far, did not change anything about the sluggish webgl performance problem.
One thing I noticed is that /dev/nvidia0 and /dev/nvidiactl both do not exist until after "startx". Could that be a problem?
Here are some logs, hoping someone sees something which looks suspicious and knows what else I could try to make it work.
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.23-1-lts (nobody@home-andyrtr-arch64-chroots-testing-x86_64-andyrtr) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP Thu Oct 30 19:41:12 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux-lts ipv6.disable=1 vmalloc=256M root=/dev/sda1 rw initrd=../initramfs-linux-lts.img
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005ffbffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005ffc0000-0x000000005ffcffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000005ffd0000-0x000000005fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff7c0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: ASUSTek Computer Inc. K8N-E-Deluxe/'K8N-E-Deluxe', BIOS 1012.007 01/18/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ e0000000 old size 32 MB
[ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
[ 0.000000] Aperture from AGP @ e0000000 size 32 MB (APSIZE 0)
[ 0.000000] e820: last_pfn = 0x5ffc0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x5fa00000-0x5fbfffff]
[ 0.000000] [mem 0x5fa00000-0x5fbfffff] page 2M
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x5c000000-0x5f9fffff]
[ 0.000000] [mem 0x5c000000-0x5f9fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x5bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x5bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x5fc00000-0x5ffbffff]
[ 0.000000] [mem 0x5fc00000-0x5fdfffff] page 2M
[ 0.000000] [mem 0x5fe00000-0x5ffbffff] page 4k
[ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x5fc97000-0x5ffbffff]
[ 0.000000] ACPI: RSDP 00000000000f9cb0 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000005ffc0000 000030 (v01 A M I OEMRSDT 01000618 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000005ffc0200 000081 (v02 A M I OEMFACP 01000618 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000005ffc0400 004524 (v01 A0055 A0055003 00000003 INTL 02002026)
[ 0.000000] ACPI: FACS 000000005ffd0000 000040
[ 0.000000] ACPI: APIC 000000005ffc0390 000068 (v01 A M I OEMAPIC 01000618 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000005ffd0040 000041 (v01 A M I OEMBIOS 01000618 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000005ffbffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x5ffbffff]
[ 0.000000] NODE_DATA [mem 0x5fc92000-0x5fc96fff]
[ 0.000000] [ffffea0000000000-ffffea00017fffff] PMD -> [ffff88005dc00000-ffff88005f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x5ffbffff]
[ 0.000000] On node 0 totalpages: 393054
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6079 pages used for memmap
[ 0.000000] DMA32 zone: 389056 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0x60000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88005fa00000 s86656 r8192 d23936 u2097152
[ 0.000000] pcpu-alloc: s86656 r8192 d23936 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 386890
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux-lts ipv6.disable=1 vmalloc=256M root=/dev/sda1 rw initrd=../initramfs-linux-lts.img
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ e0000000 old size 32 MB
[ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
[ 0.000000] Aperture from AGP @ e0000000 size 32 MB (APSIZE 0)
[ 0.000000] Node 0: aperture @ e0000000 size 256 MB
[ 0.000000] Memory: 1532388K/1572216K available (5187K kernel code, 858K rwdata, 1640K rodata, 1136K init, 1300K bss, 39828K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:8448 nr_irqs:256 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 6291456 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2210.711 MHz processor
[ 0.010032] Calibrating delay loop (skipped), value calculated using timer frequency.. 4421.42 BogoMIPS (lpj=22107110)
[ 0.010037] pid_max: default: 32768 minimum: 301
[ 0.010061] ACPI: Core revision 20131218
[ 0.020405] ACPI: All ACPI Tables successfully acquired
[ 0.020642] Security Framework initialized
[ 0.020671] Yama: becoming mindful.
[ 0.020955] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.025410] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.027465] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.027473] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.028144] Initializing cgroup subsys memory
[ 0.028166] Initializing cgroup subsys devices
[ 0.028170] Initializing cgroup subsys freezer
[ 0.028173] Initializing cgroup subsys net_cls
[ 0.028177] Initializing cgroup subsys blkio
[ 0.028234] tseg: 0000000000
[ 0.028253] mce: CPU supports 5 MCE banks
[ 0.028279] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
[ 0.034575] Freeing SMP alternatives memory: 20K (ffffffff819f4000 - ffffffff819f9000)
[ 0.035713] ftrace: allocating 20111 entries in 79 pages
[ 0.049994] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.150150] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3200+ (fam: 0f, model: 0c, stepping: 00)
[ 0.160000] Performance Events: AMD PMU driver.
[ 0.160000] ... version: 0
[ 0.160000] ... bit width: 48
[ 0.160000] ... generic registers: 4
[ 0.160000] ... value mask: 0000ffffffffffff
[ 0.160000] ... max period: 00007fffffffffff
[ 0.160000] ... fixed-purpose events: 0
[ 0.160000] ... event mask: 000000000000000f
[ 0.160000] x86: Booted up 1 node, 1 CPUs
[ 0.160000] smpboot: Total of 1 processors activated (4421.42 BogoMIPS)
[ 0.160000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.160000] devtmpfs: initialized
[ 0.160000] PM: Registering ACPI NVS region [mem 0x5ffd0000-0x5fffffff] (196608 bytes)
[ 0.160000] pinctrl core: initialized pinctrl subsystem
[ 0.160056] RTC time: 14:37:08, date: 11/06/14
[ 0.160148] NET: Registered protocol family 16
[ 0.160332] cpuidle: using governor ladder
[ 0.160334] cpuidle: using governor menu
[ 0.160347] node 0 link 0: io port [1000, ffffff]
[ 0.160351] TOM: 0000000060000000 aka 1536M
[ 0.160356] node 0 link 0: mmio [a0000, bffff]
[ 0.160359] node 0 link 0: mmio [60000000, fe0bffff]
[ 0.160363] bus: [bus 00-ff] on node 0 link 0
[ 0.160365] bus: 00 [io 0x0000-0xffff]
[ 0.160367] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.160369] bus: 00 [mem 0x60000000-0xfcffffffff]
[ 0.160397] ACPI: bus type PCI registered
[ 0.160401] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.160498] PCI: Using configuration type 1 for base access
[ 0.161627] bio: create slab <bio-0> at 0
[ 0.161792] ACPI: Added _OSI(Module Device)
[ 0.161794] ACPI: Added _OSI(Processor Device)
[ 0.161795] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.161797] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.163305] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.164921] ACPI: Interpreter enabled
[ 0.164937] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[ 0.164955] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.164958] ACPI: Using IOAPIC for interrupt routing
[ 0.164998] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.165137] ACPI: No dock devices found.
[ 0.170533] ACPI: Power Resource [ISAV] (on)
[ 0.173609] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.173619] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.173626] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.173736] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.173739] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.173742] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.173745] acpi PNP0A03:00: host bridge window [mem 0x60000000-0xff7bffff] (ignored)
[ 0.173749] PCI: root bus 00: hardware-probed resources
[ 0.173755] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.173915] PCI host bridge to bus 0000:00
[ 0.173919] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.173922] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.173925] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.173928] pci_bus 0000:00: root bus resource [mem 0x60000000-0xfcffffffff]
[ 0.173943] pci 0000:00:00.0: [10de:00e1] type 00 class 0x060000
[ 0.173955] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.174087] pci 0000:00:01.0: [10de:00e0] type 00 class 0x060100
[ 0.174184] pci 0000:00:01.1: [10de:00e4] type 00 class 0x0c0500
[ 0.174192] pci 0000:00:01.1: reg 0x10: [io 0x5080-0x509f]
[ 0.174203] pci 0000:00:01.1: reg 0x20: [io 0x5000-0x503f]
[ 0.174207] pci 0000:00:01.1: reg 0x24: [io 0x5040-0x507f]
[ 0.174221] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.174311] pci 0000:00:02.0: [10de:00e7] type 00 class 0x0c0310
[ 0.174319] pci 0000:00:02.0: reg 0x10: [mem 0xfebfd000-0xfebfdfff]
[ 0.174342] pci 0000:00:02.0: supports D1 D2
[ 0.174345] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.174378] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.174441] pci 0000:00:02.1: [10de:00e7] type 00 class 0x0c0310
[ 0.174448] pci 0000:00:02.1: reg 0x10: [mem 0xfebfe000-0xfebfefff]
[ 0.174472] pci 0000:00:02.1: supports D1 D2
[ 0.174474] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.174506] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.174565] pci 0000:00:02.2: [10de:00e8] type 00 class 0x0c0320
[ 0.174573] pci 0000:00:02.2: reg 0x10: [mem 0xfebffc00-0xfebffcff]
[ 0.174602] pci 0000:00:02.2: supports D1 D2
[ 0.174605] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.174652] pci 0000:00:02.2: System wakeup disabled by ACPI
[ 0.174721] pci 0000:00:05.0: [10de:00df] type 00 class 0x068000
[ 0.174728] pci 0000:00:05.0: reg 0x10: [mem 0xfebfc000-0xfebfcfff]
[ 0.174733] pci 0000:00:05.0: reg 0x14: [io 0xec00-0xec07]
[ 0.174755] pci 0000:00:05.0: supports D1 D2
[ 0.174758] pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.174790] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.174854] pci 0000:00:06.0: [10de:00ea] type 00 class 0x040100
[ 0.174861] pci 0000:00:06.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.174866] pci 0000:00:06.0: reg 0x14: [io 0xe400-0xe47f]
[ 0.174870] pci 0000:00:06.0: reg 0x18: [mem 0xfebfb000-0xfebfbfff]
[ 0.174890] pci 0000:00:06.0: supports D1 D2
[ 0.174967] pci 0000:00:08.0: [10de:00e5] type 00 class 0x01018a
[ 0.174983] pci 0000:00:08.0: reg 0x20: [io 0xffa0-0xffaf]
[ 0.175075] pci 0000:00:0a.0: [10de:00e3] type 00 class 0x010185
[ 0.175082] pci 0000:00:0a.0: reg 0x10: [io 0x09f0-0x09f7]
[ 0.175087] pci 0000:00:0a.0: reg 0x14: [io 0x0bf0-0x0bf3]
[ 0.175092] pci 0000:00:0a.0: reg 0x18: [io 0x0970-0x0977]
[ 0.175096] pci 0000:00:0a.0: reg 0x1c: [io 0x0b70-0x0b73]
[ 0.175101] pci 0000:00:0a.0: reg 0x20: [io 0xc800-0xc80f]
[ 0.175105] pci 0000:00:0a.0: reg 0x24: [io 0xc400-0xc47f]
[ 0.175191] pci 0000:00:0b.0: [10de:00e2] type 01 class 0x060400
[ 0.175286] pci 0000:00:0e.0: [10de:00ed] type 01 class 0x060400
[ 0.175325] pci 0000:00:0e.0: System wakeup disabled by ACPI
[ 0.175388] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.175468] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.175549] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.175627] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.175752] pci 0000:01:00.0: [10de:02e0] type 00 class 0x030000
[ 0.175770] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.175780] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff pref]
[ 0.175790] pci 0000:01:00.0: reg 0x18: [mem 0xfc000000-0xfcffffff]
[ 0.175821] pci 0000:01:00.0: reg 0x30: [mem 0xfe9e0000-0xfe9fffff pref]
[ 0.175934] pci 0000:00:0b.0: PCI bridge to [bus 01]
[ 0.175940] pci 0000:00:0b.0: bridge window [mem 0xfa900000-0xfe9fffff]
[ 0.175943] pci 0000:00:0b.0: bridge window [mem 0xba800000-0xda7fffff pref]
[ 0.175986] pci 0000:02:0b.0: [1106:3044] type 00 class 0x0c0010
[ 0.175998] pci 0000:02:0b.0: reg 0x10: [mem 0xfeaff800-0xfeafffff]
[ 0.176005] pci 0000:02:0b.0: reg 0x14: [io 0xbc00-0xbc7f]
[ 0.176047] pci 0000:02:0b.0: supports D2
[ 0.176049] pci 0000:02:0b.0: PME# supported from D2 D3hot D3cold
[ 0.176124] pci 0000:00:0e.0: PCI bridge to [bus 02]
[ 0.176127] pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff]
[ 0.176130] pci 0000:00:0e.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.176957] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.177043] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
[ 0.177127] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.177211] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.177294] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11
[ 0.177374] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *11
[ 0.177454] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *9
[ 0.177533] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *10
[ 0.177612] ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *11
[ 0.177706] ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *9
[ 0.177786] ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
[ 0.177867] ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
[ 0.177947] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0
[ 0.178035] ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled.
[ 0.178144] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
[ 0.178495] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.178498] vgaarb: loaded
[ 0.178499] vgaarb: bridge control possible 0000:01:00.0
[ 0.178573] PCI: Using ACPI for IRQ routing
[ 0.178578] PCI: pci_cache_line_size set to 64 bytes
[ 0.178617] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.178621] e820: reserve RAM buffer [mem 0x5ffc0000-0x5fffffff]
[ 0.178834] NetLabel: Initializing
[ 0.178836] NetLabel: domain hash size = 128
[ 0.178838] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.178866] NetLabel: unlabeled traffic allowed by default
[ 0.178945] Switched to clocksource refined-jiffies
[ 0.193118] pnp: PnP ACPI init
[ 0.193168] ACPI: bus type PNP registered
[ 0.193275] pnp 00:00: [dma 4]
[ 0.193336] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.193401] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.193439] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.193480] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.193867] pnp 00:04: [dma 2]
[ 0.193932] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.194190] pnp 00:05: [dma 3]
[ 0.194334] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.194597] pnp 00:06: Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.194863] system 00:07: [io 0x0190-0x0193] has been reserved
[ 0.194867] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.194870] system 00:07: [io 0x4000-0x40ff window] has been reserved
[ 0.194873] system 00:07: [io 0x4400-0x44ff window] has been reserved
[ 0.194876] system 00:07: [io 0x4800-0x48ff window] has been reserved
[ 0.194881] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.194987] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.194990] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.194993] system 00:08: [mem 0xff780000-0xff7bffff] has been reserved
[ 0.194996] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195070] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.195231] system 00:0a: [io 0x0480-0x0487] has been reserved
[ 0.195234] system 00:0a: [io 0x0d00-0x0d07] has been reserved
[ 0.195237] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195468] pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.195722] pnp 00:0c: [dma 0 disabled]
[ 0.195790] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.196055] pnp 00:0d: [dma 0 disabled]
[ 0.196135] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.196351] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.196355] system 00:0e: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.196358] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.196360] system 00:0e: [mem 0x00100000-0x5fffffff] could not be reserved
[ 0.196363] system 00:0e: [mem 0xff7c0000-0xffffffff] has been reserved
[ 0.196366] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.196611] pnp: PnP ACPI: found 15 devices
[ 0.196613] ACPI: bus type PNP unregistered
[ 0.203623] Switched to clocksource acpi_pm
[ 0.203683] pci 0000:00:0b.0: PCI bridge to [bus 01]
[ 0.203692] pci 0000:00:0b.0: bridge window [mem 0xfa900000-0xfe9fffff]
[ 0.203696] pci 0000:00:0b.0: bridge window [mem 0xba800000-0xda7fffff pref]
[ 0.203702] pci 0000:00:0e.0: PCI bridge to [bus 02]
[ 0.203705] pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff]
[ 0.203709] pci 0000:00:0e.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.203715] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.203718] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.203720] pci_bus 0000:00: resource 6 [mem 0x60000000-0xfcffffffff]
[ 0.203723] pci_bus 0000:01: resource 1 [mem 0xfa900000-0xfe9fffff]
[ 0.203726] pci_bus 0000:01: resource 2 [mem 0xba800000-0xda7fffff pref]
[ 0.203730] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.203732] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.203816] NET: Registered protocol family 2
[ 0.204157] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.204482] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.204915] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.205152] TCP: reno registered
[ 0.205159] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.205233] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.205488] NET: Registered protocol family 1
[ 0.205869] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
[ 0.290220] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21
[ 0.370210] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
[ 0.370416] pci 0000:01:00.0: Boot video device
[ 0.370423] PCI: CLS 32 bytes, default 64
[ 0.370570] Unpacking initramfs...
[ 0.464290] Freeing initrd memory: 3236K (ffff88005fc97000 - ffff88005ffc0000)
[ 0.464451] microcode: AMD CPU family 0xf not supported
[ 0.464560] Scanning for low memory corruption every 60 seconds
[ 0.465261] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.479534] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.481578] zbud: loaded
[ 0.481785] VFS: Disk quotas dquot_6.5.2
[ 0.481858] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.482120] msgmni has been set to 2999
[ 0.482218] Key type big_key registered
[ 0.482413] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.482461] io scheduler noop registered
[ 0.482463] io scheduler deadline registered (default)
[ 0.482512] io scheduler cfq registered
[ 0.482688] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.482710] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.482841] GHES: HEST is not enabled!
[ 0.482924] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.503487] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.524026] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.524343] Linux agpgart interface v0.103
[ 0.524401] rtc_cmos 00:01: RTC can wake from S4
[ 0.524562] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.524601] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram
[ 0.524617] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.524839] TCP: cubic registered
[ 0.524845] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 0.524849] NET: Registered protocol family 17
[ 0.525165] registered taskstats version 1
[ 0.525574] Magic number: 6:546:636
[ 0.525730] rtc_cmos 00:01: setting system clock to 2014-11-06 14:37:08 UTC (1415284628)
[ 0.525790] PM: Hibernation image not present or could not be loaded.
[ 0.529043] Freeing unused kernel memory: 1136K (ffffffff818d8000 - ffffffff819f4000)
[ 0.529053] Write protecting the kernel read-only data: 8192k
[ 0.534311] Freeing unused kernel memory: 944K (ffff880001514000 - ffff880001600000)
[ 0.536542] Freeing unused kernel memory: 408K (ffff88000179a000 - ffff880001800000)
[ 0.552237] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.560351] systemd-udevd[39]: starting version 216
[ 0.592052] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.592059] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.592875] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.596938] Floppy drive(s): fd0 is 1.44M
[ 0.614213] ACPI: bus type USB registered
[ 0.614265] usbcore: registered new interface driver usbfs
[ 0.614281] usbcore: registered new interface driver hub
[ 0.614967] FDC 0 is a post-1991 82077
[ 0.625659] SCSI subsystem initialized
[ 0.633113] libata version 3.00 loaded.
[ 0.633845] sata_nv 0000:00:0a.0: version 3.5
[ 0.634191] ACPI: PCI Interrupt Link [LTID] BIOS reported IRQ 0, using IRQ 22
[ 0.634194] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
[ 0.635580] usbcore: registered new device driver usb
[ 0.636718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.637213] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.637384] ohci-pci: OHCI PCI platform driver
[ 0.637732] ehci-pci: EHCI PCI platform driver
[ 0.647435] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
[ 0.647607] scsi0 : sata_nv
[ 0.652697] scsi1 : sata_nv
[ 0.652813] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xc800 irq 22
[ 0.652817] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xc808 irq 22
[ 0.653212] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 0.653223] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 0.653279] ohci-pci 0000:00:02.0: irq 22, io mem 0xfebfd000
[ 0.685200] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.700074] firewire_ohci 0000:02:0b.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 0.712351] hub 1-0:1.0: USB hub found
[ 0.712367] hub 1-0:1.0: 4 ports detected
[ 0.712766] ohci-pci 0000:00:02.1: OHCI PCI host controller
[ 0.712776] ohci-pci 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 0.712845] ohci-pci 0000:00:02.1: irq 21, io mem 0xfebfe000
[ 0.772298] hub 2-0:1.0: USB hub found
[ 0.772346] hub 2-0:1.0: 4 ports detected
[ 0.773212] ehci-pci 0000:00:02.2: EHCI Host Controller
[ 0.773228] ehci-pci 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 0.773242] ehci-pci 0000:00:02.2: debug port 1
[ 0.773285] ehci-pci 0000:00:02.2: cache line size of 32 is not supported
[ 0.773315] ehci-pci 0000:00:02.2: irq 20, io mem 0xfebffc00
[ 0.790050] ehci-pci 0000:00:02.2: USB 2.0 started, EHCI 1.00
[ 0.790381] hub 3-0:1.0: USB hub found
[ 0.790395] hub 3-0:1.0: 8 ports detected
[ 0.880074] hub 1-0:1.0: USB hub found
[ 0.880086] hub 1-0:1.0: 4 ports detected
[ 0.970117] hub 2-0:1.0: USB hub found
[ 0.970134] hub 2-0:1.0: 4 ports detected
[ 0.970356] pata_amd 0000:00:08.0: version 0.4.1
[ 0.973849] scsi2 : pata_amd
[ 0.974094] scsi3 : pata_amd
[ 0.974162] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.974165] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.980098] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.110030] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.190443] ata3.00: ATA-6: IC35L120AVV207-0, V24OA63A, max UDMA/100
[ 1.190446] ata3.00: 241254720 sectors, multi 16: LBA48
[ 1.190651] ata3.01: ATA-7: Hitachi HDT725032VLAT80, V54OA42A, max UDMA/133
[ 1.190654] ata3.01: 625142448 sectors, multi 16: LBA48
[ 1.190664] ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c7c000) ACPI=0x3f01f (20:15:0x1f)
[ 1.190668] ata3: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc6c7c000) ACPI=0x7f01f (20:15:0x1f)
[ 1.200168] firewire_core 0000:02:0b.0: created device fw0: GUID 00e0180000b91545, S400
[ 1.250375] ata3.00: configured for UDMA/100
[ 1.265023] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 1.265669] scsi4 : usb-storage 3-1:1.0
[ 1.265808] usbcore: registered new interface driver usb-storage
[ 1.290406] ata3.01: configured for UDMA/133
[ 1.310032] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.310260] scsi 2:0:0:0: Direct-Access ATA IC35L120AVV207-0 V24O PQ: 0 ANSI: 5
[ 1.310565] scsi 2:0:1:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[ 1.380033] usb 3-2: new high-speed USB device number 3 using ehci-pci
[ 1.460029] tsc: Refined TSC clocksource calibration: 2210.758 MHz
[ 1.490267] ata4.00: ATAPI: PIONEER DVD-RW DVR-107D, 1.21, max UDMA/33
[ 1.490278] ata4: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c7c000) ACPI=0x701f (60:600:0x13)
[ 1.510193] ata4.00: configured for UDMA/33
[ 1.517016] scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-107D 1.21 PQ: 0 ANSI: 5
[ 1.530745] sd 2:0:1:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.530827] sd 2:0:1:0: [sdb] Write Protect is off
[ 1.530831] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.530860] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.530988] sd 2:0:0:0: [sda] 241254720 512-byte logical blocks: (123 GB/115 GiB)
[ 1.531050] sd 2:0:0:0: [sda] Write Protect is off
[ 1.531053] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.531145] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.536391] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.536403] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.536800] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.542997] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 1.543072] sdb: sdb1
[ 1.543976] scsi5 : usb-storage 3-2:1.0
[ 1.567204] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 1.575313] sda: sda1 sda2
[ 1.575840] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.660061] usb 3-3: new high-speed USB device number 4 using ehci-pci
[ 1.810652] hub 3-3:1.0: USB hub found
[ 1.810704] hub 3-3:1.0: 4 ports detected
[ 2.210057] usb 2-2: new low-speed USB device number 2 using ohci-pci
[ 2.261495] scsi 4:0:0:0: Direct-Access INTENSO USB 1100 PQ: 0 ANSI: 0 CCS
[ 2.263859] sd 4:0:0:0: [sdc] 15858688 512-byte logical blocks: (8.11 GB/7.56 GiB)
[ 2.264963] sd 4:0:0:0: [sdc] Write Protect is off
[ 2.264968] sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 2.266088] sd 4:0:0:0: [sdc] No Caching mode page found
[ 2.266143] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 2.270838] sd 4:0:0:0: [sdc] No Caching mode page found
[ 2.270891] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 2.271726] sdc: sdc1 sdc2
[ 2.275974] sd 4:0:0:0: [sdc] No Caching mode page found
[ 2.276035] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 2.276094] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 2.446613] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.458243] usbcore: registered new interface driver usbhid
[ 2.458250] usbhid: USB HID core driver
[ 2.459628] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.1/usb2/2-2/2-2:1.0/0003:046D:C00C.0001/input/input1
[ 2.460237] hid-generic 0003:046D:C00C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.1-2/input0
[ 2.465896] Switched to clocksource tsc
[ 2.514535] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.540869] scsi 5:0:0:0: Direct-Access Hama FlashPen 1.04 PQ: 0 ANSI: 0 CCS
[ 2.541837] sd 5:0:0:0: [sdd] 1003520 512-byte logical blocks: (513 MB/490 MiB)
[ 2.542457] sd 5:0:0:0: [sdd] Write Protect is off
[ 2.542461] sd 5:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 2.543083] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2.543138] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2.546081] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2.546131] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2.546968] sdd:
[ 2.549206] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2.549255] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2.549305] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[ 3.215911] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
[ 3.216179] systemd[1]: Detected architecture 'x86-64'.
[ 3.233071] systemd[1]: Set hostname to <db1arch>.
[ 4.451586] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 4.452340] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 4.452470] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.452530] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 4.453076] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.453109] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 4.453152] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.453167] systemd[1]: Starting Paths.
[ 4.453440] systemd[1]: Reached target Paths.
[ 4.453453] systemd[1]: Starting Encrypted Volumes.
[ 4.453723] systemd[1]: Reached target Encrypted Volumes.
[ 4.453743] systemd[1]: Expecting device dev-sda2.device...
[ 4.453935] systemd[1]: Expecting device dev-disk-by\x2duuid-1be23119\x2d5515\x2d4480\x2da559\x2d696105f9cee4.device...
[ 4.454136] systemd[1]: Expecting device dev-disk-by\x2duuid-385efd17\x2d3905\x2d4b8f\x2d8ec8\x2d9419a38cfcb0.device...
[ 4.454332] systemd[1]: Starting Root Slice.
[ 4.461699] systemd[1]: Created slice Root Slice.
[ 4.461738] systemd[1]: Starting User and Session Slice.
[ 4.462302] systemd[1]: Created slice User and Session Slice.
[ 4.462320] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.462665] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.462683] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.462993] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.463008] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 4.463307] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.463322] systemd[1]: Starting Journal Socket (/dev/log).
[ 4.463621] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.463637] systemd[1]: Starting LVM2 metadata daemon socket.
[ 4.463929] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 4.463954] systemd[1]: Starting udev Control Socket.
[ 4.464241] systemd[1]: Listening on udev Control Socket.
[ 4.464259] systemd[1]: Starting udev Kernel Socket.
[ 4.464547] systemd[1]: Listening on udev Kernel Socket.
[ 4.464579] systemd[1]: Starting Journal Socket.
[ 4.464874] systemd[1]: Listening on Journal Socket.
[ 4.464930] systemd[1]: Starting System Slice.
[ 4.465527] systemd[1]: Created slice System Slice.
[ 4.465560] systemd[1]: Started File System Check on Root Device.
[ 4.465574] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 4.466125] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 4.475871] systemd[1]: Mounting Temporary Directory...
[ 4.486514] systemd[1]: Starting system-getty.slice.
[ 4.487508] systemd[1]: Created slice system-getty.slice.
[ 4.487590] systemd[1]: Mounting Huge Pages File System...
[ 4.488820] systemd[1]: Starting udev Coldplug all Devices...
[ 4.491503] systemd[1]: Starting Setup Virtual Console...
[ 4.494613] systemd[1]: Mounting Debug File System...
[ 4.497220] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.557484] systemd[1]: Starting Set Up Additional Binary Formats...
[ 4.640820] systemd[1]: Started Load Kernel Modules.
[ 4.640879] systemd[1]: Starting Apply Kernel Variables...
[ 4.642456] systemd[1]: Mounting Configuration File System...
[ 4.643981] systemd[1]: Mounted FUSE Control File System.
[ 4.864249] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.865740] systemd[1]: Starting Journal Service...
[ 4.867779] systemd[1]: Started Journal Service.
[ 5.312956] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 5.624022] systemd-udevd[140]: starting version 216
[ 6.289020] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 6.289034] ACPI: Power Button [PWRB]
[ 6.289120] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.289123] ACPI: Power Button [PWRF]
[ 6.352568] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
[ 6.352584] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
[ 6.352594] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
[ 6.368450] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 6.486856] parport_pc 00:05: reported by Plug and Play ACPI
[ 6.486927] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 6.587129] gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x200, speed 904kHz
[ 6.688852] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 6.689198] ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 21
[ 6.728214] random: nonblocking pool is initialized
[ 6.988022] mousedev: PS/2 mouse device common for all mice
[ 7.210562] forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:11:d8:00:96:f1
[ 7.210572] forcedeth 0000:00:05.0: csum timirq gbit lnktim desc-v2
[ 7.210685] ACPI Warning: SystemIO range 0x0000000000005000-0x000000000000503f conflicts with OpRegion 0x0000000000005000-0x0000000000005004 (\_SB_.PCI0.SMBS.SMRG) (20131218/utaddress-258)
[ 7.210694] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.210750] i2c i2c-0: nForce2 SMBus adapter at 0x5040
[ 7.210837] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.304777] MCE: In-kernel MCE decoding enabled.
[ 7.310354] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
[ 7.310416] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
[ 7.388088] ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20
[ 7.482978] ppdev: user-space parallel port driver
[ 7.492121] EDAC MC: Ver: 3.0.0
[ 7.682441] AMD64 EDAC driver v3.4.0
[ 7.720053] intel8x0_measure_ac97_clock: measured 50279 usecs (2472 samples)
[ 7.720064] intel8x0: clocking to 46862
[ 7.720952] EDAC amd64: DRAM ECC enabled.
[ 7.720961] EDAC amd64: K8 revE or earlier detected (node 0).
[ 7.721024] EDAC amd64: CS0: Double data rate SDRAM
[ 7.721026] EDAC amd64: CS1: Double data rate SDRAM
[ 7.721028] EDAC amd64: CS2: Double data rate SDRAM
[ 7.721029] EDAC amd64: CS3: Double data rate SDRAM
[ 7.721031] EDAC amd64: CS4: Double data rate SDRAM
[ 7.721032] EDAC amd64: CS5: Double data rate SDRAM
[ 7.721371] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[ 7.721411] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 7.819219] systemd-udevd[148]: renamed network interface eth0 to enp0s5
[ 8.800850] nvidia: module license 'NVIDIA' taints kernel.
[ 8.800863] Disabling lock debugging due to kernel taint
[ 8.878778] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 18
[ 8.878854] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 8.879632] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.123 Wed Jul 2 10:59:22 PDT 2014
[ 9.251351] Adding 2137224k swap on /dev/sda2. Priority:-1 extents:1 across:2137224k FS
[ 9.501409] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 10.518296] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.788573] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 11.527802] systemd-journald[119]: Received request to flush runtime journal from PID 1
glxinfo | grep OpenGL
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 7600 GT/AGP/SSE2
OpenGL version string: 2.1.2 NVIDIA 304.123
OpenGL shading language version string: 1.20 NVIDIA via Cg compiler
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 2.0 NVIDIA 304.123 304.123
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 1.00
OpenGL ES profile extensions:
lspci -v
00:00.0 Host bridge: NVIDIA Corporation nForce3 250Gb Host Bridge (rev a1)
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [44] HyperTransport: Slave or Primary Interface
Capabilities: [c0] AGP version 3.0
Kernel driver in use: agpgart-amd64
Kernel modules: amd64_agp
00:01.0 ISA bridge: NVIDIA Corporation nForce3 250Gb LPC Bridge (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0
00:01.1 SMBus: NVIDIA Corporation nForce 250Gb PCI System Management (rev a1)
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: 66MHz, fast devsel
I/O ports at 5080 [size=32]
I/O ports at 5000 [size=64]
I/O ports at 5040 [size=64]
Capabilities: [44] Power Management version 2
Kernel driver in use: nForce2_smbus
Kernel modules: i2c_nforce2
00:02.0 USB controller: NVIDIA Corporation CK8S USB Controller (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:02.1 USB controller: NVIDIA Corporation CK8S USB Controller (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:02.2 USB controller: NVIDIA Corporation nForce3 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at febffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=0098
Capabilities: [80] Power Management version 2
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:05.0 Bridge: NVIDIA Corporation CK8S Ethernet Controller (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
I/O ports at ec00 [size=8]
Capabilities: [44] Power Management version 2
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:06.0 Multimedia audio controller: NVIDIA Corporation nForce3 250Gb AC'97 Audio Controller (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 812a
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
I/O ports at e800 [size=256]
I/O ports at e400 [size=128]
Memory at febfb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: snd_intel8x0
Kernel modules: snd_intel8x0
00:08.0 IDE interface: NVIDIA Corporation CK8S Parallel ATA Controller (v2.5) (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable)
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable)
I/O ports at ffa0 [size=16]
Capabilities: [44] Power Management version 2
Kernel driver in use: pata_amd
Kernel modules: pata_amd, pata_acpi, ata_generic
00:0a.0 IDE interface: NVIDIA Corporation nForce3 Serial ATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
I/O ports at 09f0 [size=8]
I/O ports at 0bf0 [size=4]
I/O ports at 0970 [size=8]
I/O ports at 0b70 [size=4]
I/O ports at c800 [size=16]
I/O ports at c400 [size=128]
Capabilities: [44] Power Management version 2
Kernel driver in use: sata_nv
Kernel modules: sata_nv, pata_acpi, ata_generic
00:0b.0 PCI bridge: NVIDIA Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=10
Memory behind bridge: fa900000-fe9fffff
Prefetchable memory behind bridge: ba800000-da7fffff
Kernel modules: shpchp
00:0e.0 PCI bridge: NVIDIA Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=128
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fea00000-feafffff
Kernel modules: shpchp
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
Kernel driver in use: amd64_edac
Kernel modules: amd64_edac_mod
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
Kernel driver in use: k8temp
Kernel modules: k8temp
01:00.0 VGA compatible controller: NVIDIA Corporation G73 [GeForce 7600 GT] (rev a2) (prog-if 00 [VGA controller])
Subsystem: CardExpert Technology Device 0401
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
02:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A8V/A8N/P4P800 series motherboard
Flags: bus master, medium devsel, latency 64, IRQ 19
Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
I/O ports at bc00 [size=128]
Capabilities: [50] Power Management version 2
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
running browsers from a uterm shows only these console messages (nothing else):
firefox http://dennisbusch.de/software/refugeel … _rlGL.html
(process:489): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
google-chrome-stable http://dennisbusch.de/software/refugeel … _rlGL.html
NVIDIA: could not open the device file /dev/nvidia0 (Operation not permitted).
NVIDIA: could not open the device file /dev/nvidia0 (Operation not permitted).
google-chrome-stable --ignore-gpu-blacklist http://dennisbusch.de/software/refugeel … _rlGL.html
NVIDIA: could not open the device file /dev/nvidia0 (Operation not permitted).
NVIDIA: could not open the device file /dev/nvidia0 (Operation not permitted).
chromium shows the same messages as google-chrome-stable does.
stat /dev/nvidia0
File: /dev/nvidia0
Size: 0 Blocks: 0 IO Block: 4096 character special file
Device: 5h/5d Inode: 10741 Links: 1 Device type: c3,0
Access: (0666/crw-rw-rw-) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2014-11-06 15:42:55.105702689 +0100
Modify: 2014-11-06 15:42:55.105702689 +0100
Change: 2014-11-06 15:42:55.105702689 +0100
Birth: -
That's all I know. Any ideas?Still trying...but pretty much stumbling around in the dark here.
cat /proc/driver/nvidia/agp/host-bridge
Host Bridge: PCI device 10de:00e1
Fast Writes: Supported
SBA: Supported
AGP Rates: 8x 4x
Registers: 0x1f00421b:0x00000312
cat /proc/driver/nvidia/agp/gpu
Fast Writes: Supported
SBA: Supported
AGP Rates: 8x 4x
Registers: 0xff000e1b:0x1f004312
cat /proc/driver/nvidia/agp/status
Status: Enabled
Driver: AGPGART
AGP Rate: 8x
Fast Writes: Disabled
SBA: Enabled
Digging around the web I found how to enable fastwrites and did so by
creating a file /etc/modprobe.d/nvidia.conf
with this content:
options nvidia NVreg_EnableAGPSBA=1 NVreg_EnableAGPFW=1
after reboot, startx
cat /proc/driver/nvidia/agp/status
Status: Enabled
Driver: AGPGART
AGP Rate: 8x
Fast Writes: Enabled
SBA: Enabled
The problem of sluggish webgl performance persists though and the
browsers as described in the OP are still giving the same messages.
Here is some more data, maybe it's relevant...
cat /proc/driver/nvidia/params
EnableVia4x: 0
EnableALiAGP: 0
NvAGP: 3
ReqAGPRate: 15
EnableAGPSBA: 1
EnableAGPFW: 1
Mobile: 4294967295
ResmanDebugLevel: 4294967295
RmLogonRC: 1
ModifyDeviceFiles: 1
DeviceFileUID: 0
DeviceFileGID: 0
DeviceFileMode: 438
RemapLimit: 0
UpdateMemoryTypes: 4294967295
InitializeSystemMemoryAllocations: 1
UseVBios: 1
RMEdgeIntrCheck: 1
UsePageAttributeTable: 4294967295
EnableMSI: 0
MapRegistersEarly: 0
RegisterForACPIEvents: 1
RegistryDwords: ""
RmMsg: "" -
When I try to update my software, I'm receiving the error message "Failed to check for updates. The operation couldn't be completed. Operation not permitted."
I'm using Safari 4.0.3. Yes, I know this is an old version of Safari - I can't update it, or any other software on my MacBook. Should I just wait for the Lion OS, or is there any kind of fix a non-technical Mac user like me can attempt without screwing up her laptop?
I've tried clearing my cache and resetting Safari already - doesn't help. I've also tried to update after disabling my (Norton) antivirus software, thinking that might be interfering. None of these help.
I don't know if it's a related problem, but also I can't download .pdf files from the internet, although I used to be able to.You should use the NortonAV uninstaller to uninstall it. Disabling the dreadful thing in the past hasn't always been sufficient for it to cease creating system havoc. The Mac NortonAV version has a long and well-earned reputation for doing truly seriously nasty things to OS X. Shame on Comcast for inflicting NortonAV on its Mac customers. It's not a matter of if NortonAV will mess up OS X but when and how badly. I can't help but wondering if some setting in your Norton AV has decided that NortonAV, rather than you, will be making executive decisions about what you are allowed to install on your computer and is keeping that fact a secret.
After you are done uninstalling Norton use the finder to search for any Norton files that the uninstaller might have missed. Add the option to search for invisible files.
After you have removed all the Norton bits and pieces restart in safe mode by holding down the shift key right after the startup chime. Keep holding down the shift key until you see the Apple logo and spinning gear. Safe mode does some maintenance tasks which means a much longer than normal startup time. Use Disk Utility to repair permission
If your Mac works normally in safe mode restart. If things still aren't fixed you might want to give another shot at reinstalling Snow Leopard from the install DVD and applying the Mac OS X 10.6.8 Update Combo before taking your Mac to the Apple Store.
If you feel the need to run AV software on your Mac use ClamXav in manual mode. It's donationware and doesn't seem to cause the litany of weird problems that are associated with other AV software. -
Is there a way to import commercially purchased DVD Movie to my iPod?
Is there a way to import commercially purchased DVD Movie to my iPod?
I tried the "Import" function and that didn't work. Is there a function to convert and import or is there a program that might accomplish this?
Thanks in advance.
Chuck ManettaI would argue that transferring the movie to another medium for *your own personal use* is covered under "fair use", but of course I am not a lawyer. The law that you may be breaking would be the Digital Millennium Copyright Act (DMCA). Read up:
http://w2.eff.org/IP/DRM/fairuse_anddrm.html
In any case, we still can't tell you how to do it on these forums. -
Value & is not permitted for attribute Sales Unit - Material Object
Hi gurus,I would very much appreciate expert advice on how to solve the problem I´m facing when lauching middleware object MATERIAL.
I have 2 BDocs in red showing the following error:
Value B20 is not permitted for attribute Purchase Order Unit
Value B20 is not permitted for attribute Sales Unit
I have checked table T006 and customizing and I do have unit of measurement B20 created on CRM so I don´t understand where is the error.
Could you please help me?
Thanks in advanced,
Regards,
Lorena.Dear Lorena,
Many Thanks.
ok, I need to do manually in the CRM system. I have one question
1: If any changes in the ERP system the data is automatically replicated in to CRM system right? then Why we need to Configure again in the CRM system. for Examaple: Proudct group and Tax.
2. No, I did not replicate Sales Org., but this is also automatically replicated into CRM system. But it is already replicated into CRM i.e. Initial download.
my question is in r/3: If one customer have 2 Sales Area data is maitained in the R/3, that information is also available in the CRM side. if one more sales area is assigned to same customer, that information is also availbale in the CRM system right? but I could not able to find the new sales area data. what is the reason? and how I can dowload the changes in the CRM system?
I realy thanks to you, providing most valuable information and supporting to me.
kindly provide me where should I promote points to you.
I will try and let you know, if I am getting any problem, I will ask you again.
Thanks and Regards,
Jags
Maybe you are looking for
-
After going through the Thunderbird setup on a Windows 8.1 computer, and after selecting IMAP instead of POP, I get to the point where it asks me to input name, email and password. However, when I do so, it invariably comes back and says my name and/
-
I have windows 8 and need to install itunes (without internet)
I've got the set up.exe file through another computer (latest version downloaded) and have put on desktop of windows 8, but when i go to use the set up it say "this app can't run on your PC" find a version for your PC, check with the software publis
-
I have an ipad2 and it won't let me reload an app that I accidently deleted. It is a free app that I had downloaded without a problem and now when I try to re-install it, a message comes up repeatedly that says Error 1004-Try again later. Please help
-
How to access Headers / Leaders in the Extras folder?
After doing some searches about countdown timers I found a reference to something in the cinema tools folder. Sure enough there appears to be some header/leader content. The problem is that I have no idea what it is because I cannot figure out how to
-
Hi Experts, I have created one workflow and inside it I have created one TASK. I am using the Item BO BUS2000131 to do the processing and for sending mail. It is working properly and also I am getting Links for the Order under "Objects and attachment