Purchased eSATA expander, have new DVR STB, need IMG 1.9 for them to see each other

Hello,
I purchased the DVR expander via Verizon's WD link and now have the newest DVR, but the STB still does not see the expander.
It looks as though I need the software upgrade to IMG_1.9 for the issue to be resolved.
I live in Rockaway Park, Queens, NY and was wondering when that will be pushed through, or if one can request it via tech support.
Thank you.

It is rumored to be distributed to the last area on 10-JAN-2012. Verizon NEVER releases actual dates.
No uou can't request it, it is pushed to a wide area in one shot.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Similar Messages

HT4783 I have an early 2010 and a late 2011 MacBook Pro, they both have the latest upgrade of Lion. Neither of them can "see" each other in AirDrop. I have reset the apple ID on both. Is there any way I can make them "see" each other?

I have a mid 2009 and a late 2011 MacBook Pro, they both have the latest upgrade of Lion. Neither of them can "see" each other in AirDrop. I have reset the apple ID on both. Is there any way I can make them "see" each other?
As far as I know the older mac is compatible with AirDrop.
Thanks

So by dual-signal, are you referring to 2.5Ghz/5Ghz signal?
I'm pretty sure my Mac mini 2011 has that but for whatever reason I cannot send via AirDrop to the mini. The mini can see other computers like my 2010 MacBook Pro and send files to it, but not in reverse. The MBP is unable to see or send to the mini unless the mini has engaged it to send a file to MBP. Even then it's temporary and the mini will disappear from the MBP's AirDrop radar upon completing the delivery of its file.
So I'm a bit perplexed on how the Mac mini has AirDrop, can see other AirDrop computers and send files to them, but cannot be seen on other Macs to reciprocate.

My kids share use my apple id for their ipods. Now I'm getting an ipad and wondering if I should get a new id (they don't want to start over). Can we share but not have to see each other's apps, contacts, etc?

My kids use my apple id for their ipods. Now I'm getting an ipad and wondering if I should get a new id (they don't want to start over). Can we share the id (my email address) but not have to see each other's apps, contacts, etc? I'd rather share I think, but don't want to create a nightmare for myself. Also, I already have a kindle app (with purchased content) for my computer - does getting a new id for itunes change my ability to access my kindle account on my ipad? Thanks!

So first I'd say that it's not a good idea to start a new apple id if you have a large purchase history. You may not transfer purchases between apple IDs. You should consider some other options listed here http://support.apple.com/kb/HE37 Primarily the option where you or your children have seperate icloud accounts/email accounts that sync their contacts apart from yours. You may use your apple ID for purchases and use a different one for icloud/email/etc.

My wife and I have shared one iTunes account for 6 years. We want to create our own Apple IDs, so when we sync to our new iMac we won't see each others contacts, photos, calendar, music, etc. Is there a way to move music/apps from one ID to a new ID?

My wife and I have shared one iTunes account for 6 years. We want to create our own Apple IDs, so when we sync to our new iMac we won't see each others contacts, photos, calendar, music, etc. Is there a way to move music/apps from one ID to a new ID?

JoeyV325 wrote:
Is there a way to move music/apps from one ID to a new ID?
No.
One of you create a new AppleID and one use the existing AppleID.
But you can still use the items in each iTunes library.
Create separate computer logins for each of you.
This will give you each your own data. Contacts, calendars, photos, etc. (and your own iTunes library).

I have a Iphone4s and just brought a new Iphone 6 when I pluged the the new phone all my data wastransfered exepet for my ring tones all other info photos,music and contacts all downloaded ok but no ring tone how can i get them to come across to the

I have a Iphone4s and just brought a new Iphone 6 when I pluged the the new phone all my data wastransfered exepet for my ring tones all other info photos,music and contacts all downloaded ok but no ring tone how can i get them to come across to the new phone

This covers all the process
Transfer content from an iPhone, iPad, or iPod touch to a new device - Apple Support

I have the iPhone and my own Apple ID. I would like the iPad to have my husbands Apple ID so we are able to communicate with each other (he is deaf). How can FaceTime and iMessage be set up to do this?

I have the iPhone and my own Apple ID. I would like the iPad to have my husbands Apple ID so we are able to communicate with each other (he is deaf). How can FaceTime and iMessage be set up to do this?

Log into each device with your own Apple ID's in Settings > iCloud.
Then, so you can share preiously purchased apps, log into both devices using the Apple ID used to make those purchases, but ONLY in Settings > iTunes and Apps Stores.
Verify that each device uses your own Apple IDs in Settings > Facetime and Settings > Messages.

I have an iPad 2 and iPhone 4 and for them I use I cloud I have also 1 pc windows and at work place I use windows pc ; until now my files are stored on an external disk drive could' I use iCloud to perform the backup of my external disk drive ? Thanks

I have an iPad 2 and iPhone 4 and for them I use I cloud I have also 1 pc windows and at work place I use windows pc ; until now my files are stored on an external disk drive could' I use iCloud to perform the backup of my external disk drive ? Thanks
Loredano

These are the options you have.
Budget $1299.
http://www.apple.com/macbookair/
http://www.apple.com/macbookpro/
Best.

How can I turn off auto-renewal for subscriptions? I have been in the manage my account but I can't see any other option than to auto-renew?

how can I turn off auto-renewal for subscriptions? I have been in the manage my account but I can't see any other option than to auto-renew?

Follow the instructions in this article. You can turn off the auto-renewal on either your i-device or via iTunes on your computer:
Manage your auto-renewing subscriptions - Apple Support
Cheers,
GB

HT5225 I have an imac 24 , imac 27, mac book pro, airbook and Iphone 3G. I have switched to icloud from mobile and all the computers synch with each other but data entered from my iphone in ical won't sync to the other computers.

I have an imac 24 , imac 27, mac book pro, airbook and Iphone 3G. I have switched to icloud from mobile and all the computers synch with each other but data entered from my iphone in ical won't sync to the other computers.
Is there a setting on the iphone that will allow ical entries on the iphone to sink to my other computers
Thank-you

Welcome to the Apple community.
First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

Need Help Connecting (2) 2950 switches together, cant see each other

Can anyone please help me get my switches talking? I am currently in training for entry level certs and can't continue until i get these talking.
I have two 2950 switches connected via port 0/1 on both switches. (tried both crossover and regular cat5 connections)
I have both ports active and both VLAN 1s active and both ports set to switchport mode trunk
There is no port security enabled. Both switches have IP's assigned in the respective default VLAN 1.
IP address 10.1.10.10 for switch 1
IP address 10.1.10.11 for switch 2
VTP is set to server on both, ( I tried transparent on both as well )
I cant get these switches to ping each other and or access telnet from each other. If i connect an outside connection i can telnet individually to each but they wont see each other through ping or CDP Neighbors.
Any ideas?? Please help as i am trying to get my CCENT in a few weeks!
THANK YOU!

******* SWITCH 1 LOGIN *******
User Access Verification
Password:
SW1>en
Password:
SW1#show run
SW1#show running-config
Building configuration...
Current configuration : 1884 bytes
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname SW1
enable secret 5 $1$TIuw$zBOptQNhwsRgZ6Frv.PVx.
ip subnet-zero
ip ssh time-out 120
ip ssh authentication-retries 3
spanning-tree mode pvst
no spanning-tree optimize bpdu transmission
spanning-tree extend system-id
interface FastEthernet0/1
switchport mode trunk
interface FastEthernet0/2
switchport mode access
interface FastEthernet0/3
switchport mode access
interface FastEthernet0/4
switchport mode access
interface FastEthernet0/5
switchport mode access
interface FastEthernet0/6
switchport mode access
interface FastEthernet0/7
switchport mode access
interface FastEthernet0/8
switchport mode access
interface FastEthernet0/9
switchport mode access
interface FastEthernet0/10
switchport mode access
interface FastEthernet0/11
switchport mode access
interface FastEthernet0/12
switchport mode access
interface FastEthernet0/13
switchport mode access
interface FastEthernet0/14
switchport mode access
interface FastEthernet0/15
switchport mode access
interface FastEthernet0/16
switchport mode access
interface FastEthernet0/17
switchport mode access
interface FastEthernet0/18
switchport mode access
interface FastEthernet0/19
switchport mode access
interface FastEthernet0/20
switchport mode access
interface FastEthernet0/21
switchport mode access
interface FastEthernet0/22
switchport mode access
interface FastEthernet0/23
switchport mode access
interface FastEthernet0/24
switchport mode access
interface Vlan1
ip address 10.1.10.10 255.255.255.0
no ip route-cache
ip http server
banner motd ^C ******* SWITCH 1 LOGIN ******* ^C
line con 0
logging synchronous
login
line vty 0 4
password vty
login
line vty 5 15
password vty
login
end
SWITCH 2 BELOW
****** SWITCH 2 LOGIN ******
banner motd
User Access Verification
Password:
SW2>en
Password:
SW2#show run
SW2#show running-config
Building configuration...
Current configuration : 1894 bytes
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname SW2
enable secret 5 $1$nSFY$umNCHgrkLGTwHyI.dkbJf.
ip subnet-zero
ip ssh time-out 120
ip ssh authentication-retries 3
spanning-tree mode pvst
no spanning-tree optimize bpdu transmission
spanning-tree extend system-id
interface FastEthernet0/1
switchport mode trunk
interface FastEthernet0/2
switchport mode access
interface FastEthernet0/3
switchport mode access
interface FastEthernet0/4
switchport mode access
interface FastEthernet0/5
switchport mode access
interface FastEthernet0/6
switchport mode access
interface FastEthernet0/7
switchport mode access
interface FastEthernet0/8
switchport mode access
interface FastEthernet0/9
switchport mode access
interface FastEthernet0/10
switchport mode access
interface FastEthernet0/11
switchport mode access
interface FastEthernet0/12
switchport mode access
interface FastEthernet0/13
switchport mode access
interface FastEthernet0/14
switchport mode access
interface FastEthernet0/15
switchport mode access
interface FastEthernet0/16
switchport mode access
interface FastEthernet0/17
switchport mode access
interface FastEthernet0/18
switchport mode access
interface FastEthernet0/19
switchport mode access
interface FastEthernet0/20
switchport mode access
interface FastEthernet0/21
switchport mode access
interface FastEthernet0/22
switchport mode access
interface FastEthernet0/23
switchport mode access
interface FastEthernet0/24
switchport mode access
interface Vlan1
ip address 10.1.10.11 255.255.255.0
no ip route-cache
ip http server
banner motd ^C ****** SWITCH 2 LOGIN ******
banner motd ^C
line con 0
logging synchronous
login
line vty 0 4
password vty
login
line vty 5 15
password vty
login
end

HT4009 I bough pinball arcade in app purchases ( all pinball machines that were available ). Now that I have new iphone, Itunes charged me again to download them on new phone. They then told me they could do nothing. Help. They are ********.

I bought and downloaded pinball acade from itunes in the last year. I bought all in app puchases possible ( all pinball machines). Downloading them to my itouch an ipad as necessary. Sometimes they would crash and I would simply reload them. I bought a new iphones this week and while putting this app on my
new phone (with in app puchases) I noticed my balance on my Itunes account was going down faster than my gas tank. They were charging me again I contacted Apple and Itunes and they told me it was not there problem and I needed to contact Pinballarcade.com. That is like buying a washing machine from Sears and after having problems, they tell me to contact Kenmore. I have bought thousands in music and apps over the years. I will start switching to other services in the future. I also have an occupation that allows me to interact with the public. Whenever the opportunity allows, I will tell them of my experiences.
I did try to contact pinballarcade.com, but the website is not working, and I am running out of patience.

The Same thing happened to me! I lost about 15 Tables from all first 3 seasons and I contacted their shoddy support email, and got a response saying that I should do this that and the other thing and I followed their advice only to get the same result....All of those table are still only available to me if I purchase them! I am so upset, I think I lost about $60.00 in purchases for which I have all my receipts for....Anyone know an answer? No snarky replies please, what do you have to gain from that..I'm sure we've all been screwed by in-app purchases before and you know what a shock it is. Thanks in Advance!

Have new Computer. Need to re-download Acro 9 Pro.

I have new Computer. Purchased Acrobat Pro in 2008. Need to re-download, and it doesn't work.

If you reply be email instead of this forum, I cannot reply directly.
I tried the alternate method, as suggested in the email I just received:
DJScreenName please try the steps offered in Troubleshoot Akamai Download Manager 3 | Trial products - http://helpx.adobe.com/tech-comm-suite/kb/troubleshoot-akamai-download -manager-3.html.
And this make a tiny file that does nothing.
I downlooad all the time. I have a serial number. Why can't I simply doenwooald this softwware?
When I use MS Inet explorer with Akamai, it now says "Content verification failure".
Is there a problem downloading Acrobat 9 Pro for some reason?

I have new Ipod which shows mail,but when I punch to see all I see are the mail providers. The mail is set up correctly but I can't get rid of the providers to see my e-mails. Help??

I have new ipod touch which shows mail messages, but when I punch to access, all I get are mail providers. How can I get rid of mail providers and see my messages since the correct mail providers are set up already?

I do not know what you mean by "punc to see all mail provider".
And also what does "I can't get rid of the providers to see my e-mails".
Maybe this will help
iOS: Troubleshooting Mail

HT204053 I have multiple family members using one apple id account and all of each others information is going onto each others phones/how do i stop this?

I have multiple family members using one apple id and all of our data is going onto each others phones/how do i stop this?

Each person needs to have their own separate Apple ID along with their own separate computer user account and iTunes Library.

I have 2 iPads with the same log in and password details. How do I make them independent of each other so that contacts and calendar entries are not duplicated

I have 2 iPads. When gifting one to my wife I did not change the log in and security details. Consequently any contacts and calendar entries are duplicated. How do I make the iPads independent so that the foregoing duplications are eliminated?
Thank you

The logins on the iPads, for example the iTunes store can be the same if you share an iTunes account, this will not effect the Contacts/Calendars unless you are using iCloud to sync Calendar/Contacts in which case just setup a new iCloud account for your Wife and change the iCloud settings on her iPad to this new account.
Unfortunately the contacts if syncing with your computer will be the same as it can only sync from the given contacts on your computer.
You can use a different login to the computer for your wife and she can then have her own contacts.
If your Contacts application on your compuer has Categories/Grouping you can tell iTunes to sync certain Categories/Groups to each iPad, that way splitting up the contacts on your computer for each iPad.
The same is true for the Calendar if you only have the one calendar it will sync it for both of you, the iPad settings in iTunes has the option to pick a Calendar if you have more then one.
One option is to use an online calendar such as Google Calendar and sync to and from it with your iPad that way the Calendars would be individual.

Purchased eSATA expander, have new DVR STB, need IMG 1.9 for them to see each other

Similar Messages

Maybe you are looking for