Purchased extreme to replace modem/router DSL used telephone cord need help with set up
Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
How do I get extreme to work as the modem and router ?
How do I get extreme to work as the modem and router ?
you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible).
Similar Messages
-
Need help with setting up VPN on a Cisco EPC3925 Modem
Hi everyone,
I need help setting VPN on Cisco EPC3925 modem (I tried using Help and I have read the entire section in the manual but the manual is not the same as the window I get in my settings. For example in the manual they say I can choose "all" under Remote Secure Gateway but there is no option like that).
When I go to the VPN section this is what I get:
1. Does this mean that I can connect to my modem via VPN from some other location? I would like to be able to connect to this modem when I am not at home from some remote location from my computer in order to be able to use NAS-Storage.
2. If the answer on the first question is yes, what settings I need to enter for the:
Local Secure Group
Remote Secure Group
Remote Secure Gateway
My ISP is using dynamic IP but I have DDNS.
My router local IP is 192.168.0.1
Subnet: 255.255.255.0
Starting IP Address: 192.168.0.10
Here is how the advanced settings looks like:
Thanks in advance for your help!My problem similar too this. I create a tunnel between two epc3925 but impossible to send data between them.
The status is connected. What can I do? UPC tell me this router has only vpn client so i will doesn't work. -
JUST BOUGHT WRT54G LINKSYS ROUTER, NEED HELP WITH SET UP PLEASE!
I've tried everything to get my WRT54G to work but no matter what I do I can't get past step ten on the CD. It asks for my password and when i type and confirm type it then press next it comes up with, Router Configuration Error. Would you like to try again?
I've been stuck at this for over two hours now, please help me
Madi-LiuI had the same problem this past weekend. The CD is the problem. It is much easier to go to www.linksys.com/connect and first update the firmware (if applicable), and then use the EasyLink Connect tool. I works very well.
Good luck,
Mike -
Need help with setting a variable using xml
So I am trying to import in XML and this is working fine, But
once in flash I need to reference this variable in a later script.
Here is what I got.
function loadXML(loaded) {
if (loaded) {
/////this is the variable, which is working, it pulls the
info from the xml document properly.
var node1 =
this.firstChild.childNodes[0].childNodes[0].firstChild.nodeValue;
////another variable, etc...
var node2 =
this.firstChild.childNodes[0].childNodes[1].firstChild.nodeValue;
/////when traced it outputs the proper value.
trace(node1);
////////does not work here though.
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = loadXML;
xmlData.load("co.xml");
var latmin = 37;
var latmax = 41;
var lonmin = -109;
var lonmax = -102;
this.geoPlotter_gp.setRange(latmin, latmax, lonmin, lonmax);
this.geoPlotter_gp.setNodeSymbol("geoPloterNodeSymbol");
this.geoPlotter_gp.addNode(40.48, -107);
////////////////This is where I need to now use the variables
defined above//////////////
this.geoPlotter_gp.addNode(node1);// Boulder
this.geoPlotter_gp.addNode(node2);// Denver
/////any ideas all? I am sure this is something simple...I am
just overlooking something.var node1 is a local variable to the loadXML function and not
visible
outside the function.
Place var node1 on the timeline say in Frame 1 and it will be
visible to all
functions on the timeline.
Lon Hosford
www.lonhosford.com
May many happy bits flow your way!
"GDrider" <[email protected]> wrote in
message
news:e2p0r5$33i$[email protected]..
So I am trying to import in XML and this is working fine, But
once in flash
I
need to reference this variable in a later script. Here is
what I got.
function loadXML(loaded) {
if (loaded) {
/////this is the variable, which is working, it pulls the
info from the xml
document properly.
var node1 =
this.firstChild.childNodes.childNodes.firstChild.nodeValue;
////another variable, etc...
var node2 =
this.firstChild.childNodes.childNodes.firstChild.nodeValue;
/////when traced it outputs the proper value.
trace(node1);
////////does not work here though.
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = loadXML;
xmlData.load("co.xml");
var latmin = 37;
var latmax = 41;
var lonmin = -109;
var lonmax = -102;
this.geoPlotter_gp.setRange(latmin, latmax, lonmin, lonmax);
this.geoPlotter_gp.setNodeSymbol("geoPloterNodeSymbol");
this.geoPlotter_gp.addNode(40.48, -107);
////////////////This is where I need to now use the
variables defined
above//////////////
this.geoPlotter_gp.addNode(node1);// Boulder
this.geoPlotter_gp.addNode(node2);// Denver
/////any ideas all? I am sure this is something simple...I
am just
overlooking
something. -
Need help with setting a variable using actionscript
So I am trying to import in XML and this is working fine, But
once in flash I need to reference this variable in a later script.
Here is what I got.
function loadXML(loaded) {
if (loaded) {
/////this is the variable, which is working, it pulls the
info from the xml document properly.
var node1 =
this.firstChild.childNodes[0].childNodes[0].firstChild.nodeValue;
////another variable, etc...
var node2 =
this.firstChild.childNodes[0].childNodes[1].firstChild.nodeValue;
/////when traced it outputs the proper value.
trace(node1);
////////does not work here though.
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = loadXML;
xmlData.load("co.xml");
var latmin = 37;
var latmax = 41;
var lonmin = -109;
var lonmax = -102;
this.geoPlotter_gp.setRange(latmin, latmax, lonmin, lonmax);
this.geoPlotter_gp.setNodeSymbol("geoPloterNodeSymbol");
this.geoPlotter_gp.addNode(40.48, -107);
////////////////This is where I need to now use the variables
defined above//////////////
this.geoPlotter_gp.addNode(node1);// Boulder
this.geoPlotter_gp.addNode(node2);// Denver
/////any ideas all? I am sure this is something simple...I am
just overlooking something.when you prefix a variable using var within a function,
you're making it local to that function. ie, node1 and node2 are
undefined outside loadXML().
to remedy, don't prefix with var. -
Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.
Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
Please check out the following AirPort User Tip for details on optimal base station placement. -
My wife and I each have an iPhone4 with separate Apple IDs. We are hopefully about to purchase the 4th gen iPad; can we use iCloud on the iPad with separate IDs on the iPhones?
We would like to have all our music, photos, etc. on the iPad - is it best to create a new combined Apple ID for the iPad and simply upload our music, photos, etc. via our laptop instead? Does this not then render the iCloud useless to us?And just in case you were wondering, installing one purchased copy on all the Macs you own is specifically called out as allowed in the Mac OS X Lion license.
If you do not want to download multiple times, just copy the Applications -> Install Lion app to a safe place BEFORE you do the first install. Then copy that copy to any Mac you own where you want to install Lion. -
i need help with a second hand iphone i purchased recently,i am having issues setting it up as it has is requesting for the icloud account that was used by the previous user
Sorry.
The iPhone is of no use until/unless the previous owner removes it from their account.
You will need to find the prior owner or return the iPhone. -
my sister accidentally delete keynote from my purchased and i need to re pay if i want to use it. i need help!!!!!!!
Two ways:
1. Did you tried downloading Keynote using your iPhone as stated above? (make sure you are connected to Wi-Fi)
2. You can also use computer iTunes > select iTunes Store under STORE (left sidebar), click Purchased on the right under QUICK LINKS > click Apps > Not in My Library. -
Hello, I need help with my macbook pro.
It looks like I cannot install anything anymore. Everytime I try to install a new software, I simply get stuck during the installation type process. I put in my password, it does accept it, but it does not go any further.
I tried to reset the password, put no password, repair the permissions, the disk but nothing will do. I nearly got stuck with the log in screen but finally succeeded in disabling it.
So I thought I might try to create a new account but I cannot click the lock to make changes. It simply refuses to react.
I am now thinking about using the migration assistant to save all my settings, data and so fourth, but again I get stuck when I have to type in my password. It accepts it but nothing happens...
I guess it has something to do with the authorization process, but can't find anything on the internet about it... Can you help me out?
I am running Lion 10.7.3.
Regards,
Nicolas.
(I apologize if any grammatical/structural mistakes were to be found, english is not my mother-tongue. )You probably won't like this suggestion, but I suggest you reinstall Lion.
First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS. -
HOW DO YOU GUYS DEAL WITH APPLE.. SO CONFUSING...NEED HELP WITH SPECS FOR PURCHASE OF IMAC 21.5
Hi guys, been reading your forums, blogposts, etc and am getting more confused. I'm just a video girl trying to produce meaningful content through web videos for small to mid sized businesses and want to come over from the dark side.
Good news,, I dont need a super giant system, I do simple editing for web videos, minimal graphics, no motion graphics, no animation etc. currently using CS4, will probably end up with 5.5.
I want to get imac 21.5 or 27 if i have to.. So here's the question we all have,,, what do I really need besides an Apple fairy godmother to figure this crazy stuff out?????
I want to be able to have firewire add on, but the rest is what I need help with. So i've been looking at cs6 specs, even though im not there yet, eventually will be,, so just need to run cs4 now and build from there. I also want to eventually move to final cut down the road so I want imac able to upgrade to final cut.
WHAT DO I REALLY NEED MINIMALLY FOR NOW? WHAT CAN I GET LATER IF i CHOOSE TO DO MORE AND NEED MORE POWER?
cs6:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8, v10.7, or v10.8**
4GB of RAM (8GB recommended)
4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for preview files and other working files (10GB recommended)
1280x900 display
7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certified GPU card for GPU-accelerated performance
Any responses would be great. I know you guys are busy answering the really high end tech questionsAll the current iMac models (both 21.5" and 27" with OS X Mt. Lion 10.8) will run CS4, 5.5 and 6 just fine. They will also run Final Cut Pro X just fine. Ditto for most any application you may want to use.
Below are some notes (specific to your apparent requirements) that may help you with your purchase decision:
Notes on purchasing a 21.5" iMac
All 21.5" iMacs come with 8GB RAM but you cannot add more later. I strongly suggest getting the maximum RAM (16GB) when you order the iMac.
The basic hard drive is a 1TB 5400rpm drive. It will work fine with Adobe CS but you will probably want the added speed of the optional 1TB Fusion drive for better performance. Some people will recommend/argue for one of the optional SSD drives instead, but they are very expensive and still only come in relatively small capacities - I don't recommend the SSD drives. Get the Fusion drive and spend any extra money on a good external hard drive for backup and/or extra storage instead of an SSD.
Notes on purchasing a 27" iMac
All 27" iMacs come with 8GB RAM and you can add more later, up to 32GB
The basic hard drive is a 1TB 7200rpm drive - it will be fine with Adobe CS. There are upgrade options to a 3TB 7200rpm drive or a 1TB or 3TB fusion drive - these will be fine also. There are also SSD drive options, but I do not recommend them. (Same comments as above.)
Notes on all the current iMacs
iMacs no longer come with built-in CD/DVD drives. If you need one, you will need to purchase the Apple Superdrive accessory drive ($79)
All of the iMac graphic processors (GPU's) are compatible with Adobe CS 4, 5.5, 6
It is very difficult to impossible to change or upgrade the hard drive later on, so don't buy low-end thinking you can add a better internal hard drive later.
Be aware that Macs always come with the latest (most recent) version of OS X. And OS X Mavericks (10.9) is due to be released soon (in the next month or two). There is no guarantee that the older Adobe CS 4 or 5.5 versions will run on OS X Mavericks. If you cannot upgrade to CS 6 in the near future, you may want to purchase now rather than after OS X Mavericks is released.
For what it's worth, I'd recommend the 27" iMac if your budget can afford it. You will appreciate the larger screen size and added capabilities over the years you will use the computer. -
Need help with Itunes transferrs and can I use my Edge phone as a router?
I'm not a tech person, but need help with my Itunes account in transferring money and downloads onto new phone
Is this an iPhone?
Set it up using the AppleID you used on the previous iPhone. -
Dear apple management, apple support communities
I have purchased I pad mini e few days ago. I need help as follows:
(1) Camera: i did take a few photos but something has gone wrong. As i press the camera icon, I get a blank dark black screen. What do you think has gone wrong ? HELP URGENTLY REQUIRED.
(2) How do i sync my pc with I pad mini?
(3)i can read on i pad mini file made in microsoft excel but all numbers are very different from the original document. What is the solutuon?
Dr Uma S Nayak
<Personal Information Edited by Host>You are talking to fellow users on these forums, not iTunes Support or Apple - I've asked the hosts to remove your phone number from your post.
For the Camera app, try closing it via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar at the bottom of the iPad's screen, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't fix it then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
In terms of syncing, you will need iTunes on your computer - if you haven't already downloaded it then you can do so from here : http://www.apple.com/itunes/download/
You can conncet the iPad to your computer and select it on the left-hand sidebar of your computer's iTunes (you can enable the sidebar on iTunes 11 on a PC via control-S), and use the tabs on the right-hand side of the iTunes screen to sycn your content to the iPad.
Syncing music : http://support.apple.com/kb/HT1351
Syncing apps : http://support.apple.com/kb/PH12315
If you haven't yet synced your iPad to your computer you may also find this page useful : https://discussions.apple.com/docs/DOC-3141
For the excel file, what app are you viewing/editing it in ? If the values are different then it may be that the app that you are using doesn't support all the formulas that are being used in the spreadsheet. Apps that 'support' excel documents include Apple's Numbers app, and from third-parties apps such as Documents To Go ('premium' version) and QuickOffice Pro HD. -
My Airport Extreme cannot be discovered by my macbook pro. Need help.
New, out of the box, the AirPort Extreme is broadcasting a wireless signal with a name like Apple Network xxxxxx.
If you want to configure the AirPort Extreme using wireless, you must log on to this network first from your Mac.
Click the AirPort icon at the top of the screen, click Join Other Network, click Show Networks, select the Apple Network xxxxxx and log on. No password is required. Then open AirPort Utility.
Or
If you have a spare Ethernet cable handy, connect it from your Mac to one of the LAN <-> ports on the AirPort Extreme to establish a direct connection. Then open AirPort Utility. -
Need help with a currently "in-use" form we want to switch to Adobes hosting service
Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911
Maybe you are looking for
-
I am using the spry accordion widget to allow an author to have a table of contents with the tab containing the name of the article and a link to the article page, and the accordion content area is an abstract of the article. The problem is that the
-
Easy question - scroll bar position in listbox problem
hello again this time my question is simple... is there a way to set the initial position of a vertical scroll bar of a listbox? sometimes - if i make more runnings - remain in memory the last position...and if the new listbox is smaller then the las
-
Can i connect a printer to the usb port on airport express
I've setup my Airport Express 802.11n with my HP Deskjet D2600 series printer, reset, reconfigured, etc. but it is still saying "Printer is offline" when I try to print. What am I missing?
-
Send Picture via Email, Prompted to add Email Account (Exchange Account exists)
I recently deployed a Kerberos authenticated Exchange account to a dozen iPhones (4S's and 5's) in our department and lost the ability to send a picture using Photos->Sendto button ->Mail. I get prompted to add a new mail account. However, there is
-
Hey all I notice that openoffice can't open smb shared files. However in Ubuntu it can, so I'm wondering if there's a reason the Arch package can't. Does it just require a compile from source to enable smb support? Anyone else notice this? Not a big