Purchased new camera nikon d7100 and camera raw will not open any nef files, talked to tech support and they assured me an update would fix issue, did update and have  same issue still

I have photoshop cs5 and after purchasing a nikon d7100, photoshop will not open any of the nef files like it did with my nikon d90, I contacted support and they assured me after update that issue would be resolved...still not resolved, any suggestions?

Good day!
Please check this list to see which version of ACR supports the camera:
Camera Raw plug-in | Supported cameras
Then please check your version (Photoshop > About Plug-In > Camera Raw).
As you should see your version is not up to the task.
You can either buy a license for a more current version of Photoshop (CS6 is still available) or switch to the … Cloud License model or use the free DNG Converter.
Regards,
Pfaffenbichler

Similar Messages

  • I have a new nikon D610. PS will not open the NEF files. it will not allow me to upgrade to ACR8.3R

    I have a new camera - nikon D610
    PS will not open the NEF files
    PS tells me I have the latest version
    ACR 8.3 will open the files but the system will not allow me to upgrade to ACR 8.3
    What do I do?

    anyone?

  • I installed itunes 11 and now it will not open any help would be GREATLY appreciated!!!

    I installed itunes 11 and now it will not open any help would be GREATLY appreciated!!!

    Hi
    Can you use the mouse to access and start System Preferences?
    When you rest the mouse over a dock icon, does its name pop up?
    What happens if you open an application by ctrl-clicking on the icon then selecting Open?
    Bob

  • Updated to android 2.3 on my htc evo 4g and now firefox will not open any tabs?

    I've been using Firefox 4 since first few weeks of release and all was great with Android 2.2 on my htc evo 4g. Now updated to 2.3 this past weekend and Firefox will not open any tabs. Have resorted to using stock Dolphin... :(
    I miss Firefox. What is the fix?

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    *http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    See also:
    *[[/questions/880050]]

  • DNG conversion fail and Photoshop will not open my NEF files (Newbie question)

    Two part question. First, I just recently installed photoshop CS4 to my (windows vista) computer and I go to upload NEF photos to bridge and I check the box that says "Convert to DNG" and when it finishs uploading it says "Files successfully copied, However, DNG conversion failed." It says it everytime and I don't know what to do about that.
    Second part: I try to open my NEF files in photoshop it says "Could not complete your request because it is not the right type of document." I am using a Nikon D90 and I don't know if that has anything to do with this. I apologize if this question is in the wrong forum, I am new to this and I thought maybe camera raw had something to do with this at least.
    Thanks for any help

    You need to update your Camera Raw plug-in to either version 5.2 or 5.3RC, as well as the new DNG converter. They are available on the Adobe download page, and there are complete instructions for installation available there.

  • Camera Raw Will Not Open .CR2 Photo Files

    I use Photoshop 7.0 with a Windows Vista operating system. Camera Raw in Elements will not recognize the Canon .CR2 Raw photo files that I download from my Canon 50D using a card reader. I even downloaded the new Camera Raw 5.1 from Adobe with the same results. Any ideas?

    Indeed, I stand corrected:
    Windows:
    Photoshop Elements 6.0 and 7.0: Camera Raw 5.x
    Photoshop Elements 5.0: Camera Raw 4.6
    Photoshop Elements 4.0: Camera Raw 3.7
    Photoshop Elements 3.0: Camera Raw 3.6
    Macintosh:
    Photoshop Elements 6.0: Camera Raw 5.x
    Photoshop Elements 4.0.1: Camera Raw 4.6
    Photoshop Elements 3.0: Camera Raw 3.6
    (The following page can be confusing, with versions of ACR intermingling with versions of PSE, and different versions than the headings being listed.)
    http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Windows

  • New iPod Touch connected to wifi but will not open any browser

    I just purchased an I pod touch w/ the software upgrade included, but the touch will not connect to a web browser through safari, youtube, or any internet based channels. I use a belkin router which is showing up under the settings in my iPod Touch. The connection is a 15meg DL and 1 meg UL so I don't believe that speed would be a problem. Please Help

    Despite the WiFi connection sign you may not really be connected to your WiFi network.
    Your router may not have given your iPod a valid IP address when the iPod requested it. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • I have just purchased a new iPod touch 4th. Generation and installed the software update and now it will not open any apps and will not let me install new appa

    Why Carnt I open and apps or download any ?

    See Here... in particular #3...
    Troubleshooting applications purchased from the App Store

  • The application can "not initialize the application's security component" and so Firefox will not open any more... PLEASE ADVISE!!

    One day while trying to run the firefox application a box popped up and said:
    "Could not initialize the application's security component. The most likely cause is problems with the files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem."
    Ive tried everything and even deleted and then reinstalled firefox... We miss it!!

    Please try
    * disabling any background anti-virus software you have, as it may be using Firefox files while it loads and prevent it from reading them
    * following the steps at [[Could not initialize the browser security component]]

  • Adobe 9 worked fine, then just stopped working.  Loaded adobe 11 and it will not open any .pdf files

    Why can't I get Adobe Reader 11 to work at all??  Won't open, repaired via Windows XP as suggested, does not help.  Will not open files in Emails, or stored on the disk. HELP!!!!!

    No, neither vers. 9 nor 11 will do anything by itself, no errors, no nothing, hourglass shows up for about 10-15 seconds, no message, no nothing.  Very frustrating, to say the least.  When you have 11 loaded it says Acrobat failed to load its core .DLL but this is several minutes later.  Can’t find anything relating to that problem.  Any help would be appreciated as I have some very important files that cannot be opened.
    Curtis Jenkins

  • My wi-fi connection is enabled, however Safari is telling me the server stopped responding.  My laptop is working fine on the same wi-fi network.  I have reset the network settings and still Safari will not open any web pages.  Help!

    My wi-fi connection is enabled, however Safari is telling me the server stopped responding.  My laptop is working fine on the same wi-fe network.  I have reset the network settings and still Safari will not open any web pages.  Help!

    Ralph..........Did as you suggested and I am still getting the message "Safari could not open the page because the server stopped responding".  I am not able to connect with anything on the Internet.  Frustrating since I am able to connect with my laptop.  Thanks for the suggestion.

  • I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.

    I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.  I get a message saying that Camera Raw does not support my camera type but it always has in the past.  The bridge no longer shows the picture view of my NEF files.  These are Nikon NEF files from the Nikon 5100 DSLR camera.  How do I fix this?

    I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.  I get a message saying that Camera Raw does not support my camera type but it always has in the past.
    When you re-installed Photoshop, you also re-installed the version of Camera Raw which shipped with Photoshop - in other words you reverted to an older version of Camera Raw which does not support the D5100.
    Camera Raw plug-in | Supported cameras
    The D5100 was first supported in Camera Raw version 6.4.
    In Photoshop, click Help > Updates to update Camera Raw.

  • Nikon camera RAW will not open in PS CS3 on Win 8

    I have photoshop CS3 extended ver 10 and Elements 6.  I installed both on a new PC with windows 8.  PS will not open my RAW files taken with my Nikon D40X although Elements will.  PS opens tiff and jpeg.  I went to Adobe updates and tried to install ACR 4.6 (Camera raw 8bi.)  The Error message for bothe the opening RAW files and installing the update is, "Could not complete your request because it is not the right type of document." I uninstalled PS and Elements and reinstalled just PS.  Same problems. I transfer the RAW files from my camera to computer by copying them through a card reader. 
    Thanks for any help.

    PS and PSE each have a different place to put the  .8bi file, so manually do the updated according to the instructions for each product on this page:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
    Re-installing PS or PSE will revert the ACR plug-in for that software back to the oldest version that originally came with that version of software so you’ll need to update using the contents of the ZIP file, again.
    You can do a Help / About Plug-in… / Camera Raw… in PSE and PS to see what version you have installed in each.  Plug-ins are scanned at startup, so you’ll want to restart each product after doing the manual install.

  • HT204406 i purchased music from itunes and now itunes will not open on this mac.  is there a fix for this?

    i purchased music from itunes and now itunes will not open.  how do i get it back?? 

    Hmmm. There's a couple of things that might be going on with that one.
    Let's try an uninstall and reinstall of QuickTime first.
    If you're using XP, head into your Add or Remove Programs control panel. Select "QuickTime", click "Change" and then click "Remove".
    If you're using & or Vista, head into your Uninstall a program control panel, select QuickTime, and then click "Uninstall".
    You can get QuickTime back either via Apple Software Update (in your Start menu go "All Programs > Apple Software Update" ... QuickTime should appear in the "New Programs" section), or by downloading a QuickTimeInstaller.exe from the following location:
    http://support.apple.com/kb/DL837
    Does your iTunes launch properly now?

  • I have just updated iTunes on to my MacBook Pro and now it will not open iTunes at all and I need to plug my new iPhone to it but i can't???

    Updated my iTunes to the recent one and now it will not open on my MacBook Pro, got a new iPhone so tried to connect it and said i needed the new iTunes (which i did) and now i can't start my phone as i can't open iTunes which means i can't access anything on my phone!!?? HELP???????

    You supply little pertinent about the MBP and the iPhone.
    First... on the MBP... Click on the Apple icon.. Top left in Finder...
     > About this Mac > Version...what does it say?
    Which iPhone and what is its' iOS Version.

Maybe you are looking for

  • Unable to "share" a photo. Get error message stating server is not responding. But all normal email functions work just fine.????????

    unable to "share" a photo. Get error message stating server is not responding. But all normal email functions work just fine.????????

  • Mysql instance

    I have somehow locked myself out of being able to connect to the mysql 5 server using mysql administrator. Error: Could not connect to MySql instance at localhost. Error: Access denied for user 'root'@localhost I tried Navicat and that also does not

  • Creating a Business Package for multiple Target Audiences

    Hi, I want to create a business package that will be certified later.  The required target audiences are Line Managers and Specialists.  From what I understand, a business package must be assigned to <i>one</i> of the following: Every User, Managers,

  • My Ipad/Iphone4 won't back up

    Can someone please help me? Everytime I try to back up my phone it gives me an error and says it cant back up I need help because I want to e able to restore my phone. Oh and I have the latest iTunes and iOS software.

  • How do I connect my printer to my mac?

    I have a wifi wireless printer which needs a DVD to install the dive to allow it to work. Will it work on a mac as I've used it on a pc, is it compatible. Also what do I do because there's no DVD drive! How do I install it ?