Purchased QNAP 469-Pro NAS, need your assistance upgrading my home network components

Hi everyone, 
First of all, I apologize if I am posting my question in a wrong sub-forum. Having said that, I've recently purchased a QNAP 469-Pro NAS -- http://www.qnap.com/en/index.php?lang=en&sn=822&c=351&sc=513&t=520&n=9786 -- that has dual gigabit lan ports. The unit also supports link aggregation ( otherwise known as port trunking or IEEE 802.3ad). Currently I have a WRT 610N wireless router and a TP-Link 8 port gigabit switch that does NOT support link aggregation. Now, I would very much appreciate it, if you helped me by teaching me how to best upgrade my network components so as to fully utilize the performance (or come close as much as possible to the advertised performance) of 221.8 MB/sec Reading, 220.8 MB/sec  Writing mentioned on QNAP's website. I have all of my files (movies, music, personal data files, etc) stored on the NAS. I get roughly an abysmal ~38Mbs right now. My household uses the NAS constantly to stream from and download to the NAS. Any help would be greatly appreciated. Many thanks in advance....
P.S.. There are two MB Pros (2010 Core I7, 8GB ram) and two iPads (2) that are most of the time connected to the networking either watching something or browsing the web. 
Amir 

What if I use SLM2008 for the switch? Then all i need is a wireless router that gives me a perfomance closer to the rates I have mentioned in my original post ( actual throughput, not advertised rates). 

Similar Messages

  • Need your assistance in mapping Structure and Field in DME Tree

    Hello Friends - I need your help in "Mapping from structure field" in DME.
    In the existing format tree, It is mapped Structure as "FPAYP" and Field name "BNAME" to populate Company Code name in the Payment file.
    Now I am asked to change this to populate value either from OX02 or OX15.
    When Company Code name was maintained, It was maintained in short and in the address tab, Full name is maintained.
    Please let me know which Structue and Field I should assign to pull the value either from OX02 or OX15.
    Thanks for your help.

    Thanks a lot Henri/Lakshmi.
    I have maintained mapping procedure Sturecture/field - FPAYHX/AUST1 to get the CoCd name in the file. In AUST1, Length of the CoCd is more  than 18, and as per Bank format, It should be 18 characters in length.
    User is not happy that complete CoCd name is not populated in the file. He has come up with an alternative and shortened the CoCd name that needs to be populated in the file and suggested us to get the value into the payment file. We should not replace CoCd name with the name he suggested in OX02/OX15,FBZP.
    My doubt is that if there is any filed I can use to maintain the name he suggested and assign it in mapping procedure.
    Thanks

  • I need your assistance​? Verizon won't port old phone number over to my new FIOS

    Need your help on resolving this issue with Verizon.  I switched from COX cable. Had Verizon FIOS triple play installed at my house about 3 days ago.  I signed up online for Verizon FIOS and selected a new telephone number because I was told online that my old number cannot be ported over to new FIOS.
    Earlier today, I was contacting my friends for a new phone number and learned from them that it is violation of FCC regulation that the Verizon FIOS could not port my old number. They said that the Verizon should be able to port my old number... In my realization, I contacted Verizon customer service, but the rep said that the Verizon FIOS cannot do it because the installation is completed. 
    I wanted to keep my old telephone number that I had years originally with Verizon and then Cox. 
    Any ideas on how to get or make Verizon port over my old telephone number to my Verizon FIOS?  Again, I was told by a Verizon rep or online during the sign up process that it can't be done and/or they won't do it.     

    Need your help on resolving this issue with Verizon.  I switched from COX cable. Had Verizon FIOS triple play installed at my house about 3 days ago.  I signed up online for Verizon FIOS and selected a new telephone number because I was told online that my old number cannot be ported over to new FIOS.
    Earlier today, I was contacting my friends for a new phone number and learned from them that it is violation of FCC regulation that the Verizon FIOS could not port my old number. They said that the Verizon should be able to port my old number... In my realization, I contacted Verizon customer service, but the rep said that the Verizon FIOS cannot do it because the installation is completed. 
    I wanted to keep my old telephone number that I had years originally with Verizon and then Cox. 
    Any ideas on how to get or make Verizon port over my old telephone number to my Verizon FIOS?  Again, I was told by a Verizon rep or online during the sign up process that it can't be done and/or they won't do it.     

  • HT201320 Dear all,  while i was trying to dowload an application i received an error "your apple id has been disabled" . I need your assistance

    Dear all,  while i was trying to dowload an application i received an error "your apple id has been disabled" . I need your assistance

    You will need to contact Apple support: http://www.apple.com/support/itunes/contact/

  • HT1338 I have just purchased this mac pro and am trying to upgrade software but the former owner has a pass word and I don't know it what can i do as I want to download the mac app store??

    I am new to mac pro, i do own a iphone. I just purchased this mac pro 2008 and can not do upgrades as it wants the pass word from the prevoius owner and I don;t have it! What can I do? 

    Firefox is a web browser like Safari, it doesn't do photo editing.

  • Need help connecting pritner to home network

    Okay, here is the run down.  I just created a home network with a Netgear wireless N router.  I have an Airport Extreme Base Station (domed) that is connected to an HP inkjet printer, but not to either the router or the modem.  Previous to the home network, the AEBS was its own network and I was able to printer from computers (PC laptop and Mac Mini) by switching networks.  Now, I want to be able to stay in the home network and print.  From what I am reading, it appears that I need to reset the AEBS and put it in bridge mode.  I found instructions for this online, but could not get it to work.  Can someone please help me out here or direct me to a tutorial on how to do this?  Thanks

    Something to try... check your computer name in the Sharing preferences. It sounds really bizarre, but when I first hooked up to my wireless, it had the same problem you are describing. Change the computer name to something with no spaces or strange characters. It worked for me! According to Qwest internet troubleshooting, this is a known problem with wireless Mac computers. Good luck!

  • Need help sharing folder on home network

    I just setup 10.4 server on a mac mini for my home. I would like to share a Public folder for the family's files and itunes on the server. I would like to have it be completely open for access by anyone in my home network. What is the best way to set this up??
    Currently I made a user "itunes" and shared Music which my XP machine and my Macs can access. But folks need a password to get into it. I want it completely non-secure. I did this via Server Admin. It almost seems easier to just share a folder via "Sharing" in Sys Prefs.
    I replaced this machine with a SuSE Linux machine just a couple days ago. It was a lot easier to share on SuSE, but I guess I'm just not used to the system yet.
    Thanks for the help.
    Tom
    PS - I posted this on the 10.5 section by mistake.

    In Tiger server you setup sharing of folders/files using he WorkGroup Manager, WGM, in Server Admin you configure the AFP and/or SMB Windows filesharing server(s) and turn them on/off.
    I don't think you can leave the password empty for SMB server access for a non guest user.
    So if you turn on guest access I think guest shared folders accessible without a password.
    Otherwise you might from Windows need to "connect as an other user" and perhaps tel Windows which machine/server should authenticate the user by entering server machinename\username or server ip\username and password (which can be very trivial like "123" or something).

  • Assistance with Wireless Home Networking

    Hello-
    I am struggling to get my house set-up properly for a strong wireless signal strength. I could use some advice.
    My current set-up includes:
    1) A 2Wire gateway broadcasting wirelessly at 2.4GHz (b/g)
    2) A Time Capsule connected to the gateway via Ethernet and broadcasting wirelessly at 5GHz (n).
    My signal strength is very poor in some portions of the house. Most noticeably where I need it the most... My media room (which has the Apple TV, PS3, etc.). Oddly, my Time Capsule has 30% less strength than the 2Wire.
    From reading posts here, it appears I have the following options:
    a) Get an airport express and use it as a range extender.
    b) Get a power line home networking device and hook-up my devices via Ethernet.
    I would appreciate any suggestions on the proper way to go, and, if there are any other things I should try besides what I listed above.
    To help, I have linked to 2 images: The first is the layout of my house and the second is my signal strength:
    http://www.malphurs.com/shared/LayOut.jpg
    http://www.malphurs.com/shared/Strength.jpg
    Thanks again!

    Sorry to be vague... The Time Capsule is only for the back-up of my laptop.
    What I am attempting to do is expand my wireless network through out my house. It has not been doing so up to this point. I have a newborn on the way quite soon and had to turn my home office into a nursery. In doing so, I lost my second TV that I had my Apple TV, Playstation 3, and X-Box connected to.
    When I moved all these devices to the media room, the wireless was not strong enough for them to function. So, what I have done is:
    1) kept my 2Wire gateway broadcasting wirelessly as before
    2) set the Time Capsule up to "join a network" as opposed to "create a new network" and connected it to the gateway via ethernet
    3) connected a WD LiveWire ethernet adaptor directly into the gateway via ethernet
    4) put the second WD adaptor in my media room and connected all my devices to this via ethernet
    All seems fine, but I am not sure this is the "optimum" set-up. I also don't know if I should add an extra router in the media room to broadcast a stronger wireless signal. This router would - of course - be connected to the WD LiveWire via ethernet, as are the rest of my devices in the media room.
    Hopefully that is a tad more clear... Thanks again!

  • Hi, I have the Adobe Creative Suite 5.5 student teacher edition. I have just recently purchased a MacBook Pro and need to switch the platform as it's currently for windows can anyone guide me on how to this please ??

    can somebody help me as I need this software for uni and as a student cannot afford to purchase a new one !

    You should have invested in another Windows machine if your intention was to continue to use CS5.5.  Platform swaps are only supported for the most recent release which is currently CS6.  You can confirm this by reviewing the policy thru the following link:
    Order product | Platform, language swap

  • Please, I need your assistance...

    Please, I have an ipad 4 cellular wireless. I downloaded some songs with a browser and a downloader. I want to move it to iTunes so that I will be able to always play it from there, but I seem not to be able to do it. Any assistance on that from anybody. Thank you.

    Depending upon what app that you downloaded them with then you might be able to copy them from that to your computer's iTunes via the file sharing section : http://support.apple.com/kb/ht4094
    If they are in a compatible format you can then add them to your computer's iTunes library via File > Add To Library and you can then sync them to the Music app on your iPad - syncing, and downloading from the iTunes store app directly on your iPad, are the only ways to get music into the Music app.

  • Why my ID is not eligible to purchase gift certificates. I need your help.

    I want to purchase gift certificates by e-mail, but the system prompts "This Apple ID is not currently eligible to purchase gift certificates. I want to know how I need to do in order to buy, tomorrow is the birthday of my friend, I hope you can reply to me as soon as possible.Thank you!

    You can't resolve that by yourself man. Contact support so they can check:
    http://www.apple.com/support/itunes/contact/

  • It me agian i need your assistance.

    well i tried to build a Active X for OUTLOOK 2000 and 97 and i seem
    not to have success. what i'm trying to do is have a MAX and MIN Limit on
    data capture VI and then if the project goes out of specification alarm then
    goto to a email or pager capability of course when i activate the OUTLOOK
    this will call my modem then send the numeric page???? please help anyone...
    i'm at the final of my project i seem to be stuck at this section.
    i use LV 5.0.1 with the G code.

    Hi mark,
    If, once you follow Steve's instructions, you find that the App says "Downloaded" next to it instead of the cloud, go back into your Apps tab (not in the store, but the one for your computer in iTunes), and drag the offending app into the trash - delete it from iTunes when the question comes up.
    At that point, you should quit iTunes, then reopen it, and follow Steve's instructions again. This time you should see the cloud...proceed with Steve's instructions.
    Cheers,
    GB

  • Attn: deathstalker i need your assistance

    i checked the athlon recommended motherboards a while back for the 2200xp's.  the board meets qualification according to amd (then), but it used to say for bios 2.6.  now after not able to boot up at all with the 2200 i replaced my 1600 in there and did a look back.  it says that bios 2.7 is what is needed.  i was wondering if it is possible to be sent a beta bios?  i will comply with certain agreements if need be.  please, give me a reply to my msn account [email protected]  this way i can give you my preferred address for easier transfer and communication.  tia
    note bios 2.6 max mult is 12.5 needed is 13.5.

    thanks i did when i got in from work, but no go at all.  diag lights all red and no post.  i checked the bios multipliers before i did it anyway and it only went up to 12.5.  anyone have any knowledge as to why they say bios 2.7 is needed and i have it but it is not capable to run that multiplier?
    thanks again

  • Options Screen - Need your assistance.

    Hello,
    When you click on "Options"  in the menu section, are you able to see "General Options"? I want to change the default volume for calls but the instructions for the 8900 Curve is telling me to do the following:
    1. In the phone application press Menu key.
    2. CLick Options
    3. General Options (Which I don't see)
    4. Default Call Volume field
    5. Press Menu Key
    6. Click Save
    IS there a different route to take? Or do I have a software problem.
    Also, can I change my ringtone or alert tone for my text messages? If so, how do can I do that.
    Thanks for your help!
    Solved!
    Go to Solution.

    The Profiles are the volume settings for your phone. So you can change the profile settings to Loud, Normal, Vibrate, etc. You can either go to your profile settings from the main screen or the Application Menu screen.
    From the Main Screen scroll up to go to your Profiles 
    In your Profiles, scroll all the way down and select Advanced
    In the Advanced settings, you can edit each profile. Scroll to the profile you'd like to edit, such as Normal. Hit the menu key, and select Edit.
    You will then be taken to a list of all the applications that requires a ringtone. You can edit the tone, volume, etc for each one.
    To edit the ringtone for your voice calls, select Phone. When done editing, hit menu to save your changes.
    To edit the ringtone for your text messages, select SMS Text. When done editing, hit menu to save your changes.
    Please Kudos me if that helped and mark as resolved if I did so
    Message Edited by mizmellyjelly on 01-11-2009 11:50 PM
    ..miz melly jelly.. - click to follow on Twitter!
    Don't forget to Kudos me

  • I need your assistance,can you please help?

    Hello to all,
    To make a long story short, I had installed the software "Net Nanny" but had to take it off as it was creating too many problems.Anyhow, I think something happened with an Adobe _____??
    When I RIGHT click on my desk top or on some of my folders I get the following message:
    Explorer EXE Fatal Application Exit
    "The specified module could not be found. C:\Program Files\Common Files\Adobe\Adobe Version Cue CS4\Client\4.01\Version Cue DLL."
    I reinstalled by Adobe 9.0 Professional but I keep getting this message and it's horrible. For example, I cannot right click to do a "scan disk" because this message pops-up.
    Thank you for any assistance!

    Sounds like the problem mentioned in.
    http://kb2.adobe.com/cps/408/kb408524.html
    This is probably unrelated to Acrobat but related to Creative suite. Please try the Version Cue forum:
    http://forums.adobe.com/community/creativesuites/version_cue_windows?view=discussions

Maybe you are looking for