Purchased tv shows wont transfer to 30g video ipod even after latest update

OK, so, after this latest update for itunes and ipod, i can only get one purchased tv show to transfer to the ipod video. how do i get the rest to transfer?
Windows XP

Don't have my video with me, but do a search in the threads, or look in the help files in iTunes and you can find it, or someone will jump in here with it. I know you will need to connect your iPod, highlight it in the source list, and it should be on one of the syncing tabs.

Similar Messages

Xf86-video-ati unhappy after latest update

After an kernel update from 2.6.32 to 2.6.33 and a driver update from 6.12.4 to 6.12.192, KSM was enabled and with it I get a boatload of strange behavior. I'm just curious to see if anyone else is experiencing it.
1. On boot the framebuffer flickers alot. Not a "on-off" type of flickering but rather like the screen brightness is constantly being set to new random values.
2. The framebuffer also shows flickering ~ 1px wide lines once in a while.
3. Once KDM has started the screen will fade to green and then snap back to what the screen is actually supposed to be showing, then start to fade to green again...
I disabled KMS and this all went away. However, some scrolling artifacts etc in KDE still remain.
This is a 64 bit Arch setup, completely updated and the graphics card is the Ati X1400 laptop chip.
Best regards

I have a similar problem with a Ati FireGL V5200.
Adding radeon.modeset=0 or nomodeset to kernel option line, works, but KMS is disabled.
in my case, I discovered that if I change the resolution, and back to my original resolution, the problem disappears and KMS is enabled.
so, I created a very small script that changes resolution. I tried to put it on /etc/rc.local but the script needs that X server is running. I use GDM, so I add two lines to my /etc/gdm/Init/Default script and it works. The boot process is still ugly and the screen flickers but KMS works fine.
To change the resolution add first a lower resolution and then the original (i use 1680x1050)
xrandr -s 1024x768
xrandr -s 1680x1050
to /etc/gdm/Init/Default
I use GDM, but I guess that KDM, XDM, SLIM have a scripts too.
Regards!!
Last edited by watacaweb (2010-04-13 10:29:42)

30G video iPod won't show on desktop or in iTunes

Powerbook G4, 10.4.8, iTunes 7.0.1
30G Video iPod, connected by USB cable -- oh so frustrated! Big trip coming up and can't put any of my audible books on my iPod!
This seems to have started after I upgraded iTunes to 7.0, is this source of my problem?
Suddenly I plugged in my iPod and it won't show up on the desktop, iTunes or Disk Utility
Things I've tried:
Reset iPod, (can't restore the iPod, since no application or utility will recognize it), did all upgrades to iTunes, unplugged all usb ports, repaired all permissions, tried plugging it into another Mac G5 and it wouldn't show up there either.
It plugs into my power source from the electrical outlet and is fully charged, and plugs into my car radio via a monster cable just fine, just won't connect to a computer.
Please, I'll try anything. Thanks so much for your help.

Try this site.
http://docs.info.apple.com/article.html?artnum=60950
It's probably too late for your trip but if you're still having the problem try it.
Post back with results.

The audio on my purchased tv shows doesn't sync with video.

The audio on my purchased TV shows won't sync with video. Any ideas? Thanks.

Hello jjos4,
It looks like the article below has some troubleshooting steps for this specific issue.
Note: The article mentions that it is for Windows Vista and Windows 7, but most of the troubleshooting should still be applicable in Windows 8
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Hope that helps,
Griff W.

New 30g video iPod not fully accessible.

Hi all,
I looked around but couldn't find any replies specific enough for my sitch.
I just got a brand new 30g video iPod last week. I tried to load it up this weekend using my 2002, 1ghz, 17" flat panel iMac (usb 1.0/firewire).
I'm able to load playlists/music on my iPod (10.75 gigs so far) but I can't load videos. When I try, I get a message saying , more or less, that "the video can't be loaded on this iPod". Also, in iTunes, I only get tabs in the iPod section for:
Summary
Music
Podcasts
Contacts
And, under summary it reads: n/a for Software Version and n/a for Serial Number. And it says - Format: Windows. Since it was brand new out of the box, I figured it would have configured itself to Mac automatically?????? And "Software Update" and "Restore" are grayed out and not useable.
I thought all this might have something to do with using a usb 1.0 port on my iMac but I used a PC laptop with usb 2.0 and iTunes to check the iPod with and got these results:
I got more tab choices for the iPod such as: Movies, Photos, etc. and it showed the Software Version and Serial Number of the iPod but when I tried loading a video, I still got the same message saying that the video couldn't be loaded on this iPod.....huh????
Anybody know what's going on. I want to use the iPod to it's full capability and I want to use it mainly with my iMac because that is where I have all of my music and movies/videos (total of about 19 gigs worth of music and video). I'd rather not have to transfer all that to the PC.
Do I need to use Disk Utility to erase the iPod? I just don't want to mess it up.
Thankxx
vanessa_b

Hi, just to be clearer guy's:
1. I'm not trying to upload movies from DVD's just digitized, downloaded videos.
2. I am only using iTunes to manipulate the iPod, thought that was clear.. :/
3. I tried the different video formats just to see if any at all would load.
I'll try to restore on the PC laptop. I'm still confused as to why the box says "PC/Mac" but upon connecting it to my iMac right out of the box, it was Windows formatted???
Oh well, let me give the PC restore a try. I'll let you all know.

30G Video IPod and Windows Vista - Help!

I just recently bought a new computer equipped with Windows Vista. I have a 12" G4 iBook that was my main computer from which I ran my 30G Video iPod, and now I am wanting to sync my iPod with my new Windows computer, and this will be the only system I use with my iPod.
I realize there are many problems with compatibility of iTunes/iPods with Windows Vista.
My question is, barring the problems with iTunes, I downloaded the latest iTunes anyways and tried to use Yamipod to bring my 1600+ songs onto my computer from my iPod by bypassing iTunes. Problem is, my computer doesn't even recognize the iPod at all. iTunes does, but when I cancel the box asking me to reformat my iPod to Windows format and try to use Yamipod, Yamipod doesn't even recognize an iPod existing. I thought maybe it was just the program, so I tried about 4 others, but nothing. I also used the cd that came with my iPod and put the drivers onto this computer, but the actual computer still doesn't even recognize it plugged in.
Any ideas? Also, because a lot of my songs are in m4a format, how will that work if I am able to put them on this computer? Will I have to convert them all to mp3?
Thank you for any help you can give.

And given that Vista has been available in Release
candidate version for ages and that the release date
has been known for ages, shouldn't apple have made
the effort to make itunes compatible with Vista?
After all, the vast majority of itunes users live in
Windows land.
perhaps you should familiarise yourself with the common usage and implications of the symbol string
but as you clearly aren't familiar with it, if i took your question seriously, which i don't, then the answer is no...
your argument is that being first and being in the majority rules
that'll be apple then won't it
i) i can't be bothered to check the itunes release date, certainly it was out in 2001, which is several years before microsoft even figured out what to call the os formerly known as longhorn, let alone finished sawing off the pieces it couldn't make work
ii) the majority of people with portable music players use ipod/itunes, so it is for microsoft to conform with the majority and not make changes that impair the products used by the majority
so, by your own argument, it is microsoft's responsibility to maintain compatibility

Why I can't see some songs in my 30G video Ipod if I search via artist?

Hi. This is an Ipod question. I load my iTunes library in 2 Ipods,the new 30G video and in the old 20G photo. Why is it that in the 20G Ipod when I search for the songs via artist, all of them appear, but when I search via artist in the 30G Ipod in some cases it only appears one song, and all the others dont, although they are there, cause when I search via song I find them. This is very annoying, cause I hate to search via song. The songs are perfectly edited, the probe is that with the 20G photo Ipod I dont have this problem. I think is a problem with the Ipod cause I been having this problem with 3 different 30 G Ipod video (Mine & my friends). Does anyone has had the same problem?
Getway Windows XP

Hi Chris.
Ok every son gneeds artist and album, but why in my 20 G photo Ipod I can see the songs searching via artist without any problem. And why in the new 30G video Ipod it only happens with some artists, cause for example I have 40 u2 songs, some with album name and some not, and all of them appear searching via artist. But with another artist, for example def leppard, I have 15 songs (some with album name, and some not) and searching via artist I can see only the ones in some particular album, and others that also have album name dont appear unless I look for them via song

You Tube not playing video on Firefox with Adobe Flash after latest update

You Tube and other sites are not playing video on Firefox with Adobe Flash after latest update for both. Adobe Flash is working on other sites but not You tube and those sites that may have embedded You Tube videos, I'm not sure.
Adobe Flash does not crash and no error message is showing. All that shows is a dark screen for the Flash video. Right clicking the screen shows only a non-clickable 'Movie not loaded' and the clickable link to the Adobe home page.
I have spent an hour trying things as suggested for past problems similar to this but none have helped.
I have sent sad face letting you know what I think of the latest update because of this which says pretty much the same thing as I have said here.
I have no further info but if I had some input and queries form you I might be able to provide more.

I'm not sure how to remove the 12.xxx version,. I don't understand why it is there, usually updates over wirte the old one as far as I know. I don't know where to find it.
pref .js deleted.
I could not find a user.js
I disabled hardware acceleration on one of them, not sure which and I don't remember how I did it but think it must have been on the flash.
No idea what protected mode is
no new profile, I've never done this.
Ok, did what you have said as much as I could. I have been fidgeting with things now for a couple hours. After doing a CCleaner and Registry cleanse, turning off and restarting the computer, the videos are now p-laying.
I would still like to know how to find and get rid of the duplicate Flash plug in though if you would't mind.
Thanks for the help.

Ipod doesn't show all the songs listed in Itunes even after sync is complete

Ipod doesn't show all the songs listed in Itunes even after sync is complete

I'm going through the same thing, I've tried de-authorizing and re-authorizing my computer and that seems to help. I haven't gotten all my songs back yet, but I've got about 75% of it back.

I purchased OS X Server 3.2.2 in August and after I updated to OS X Yosemite Apple wants me to pay $19.99 again! ***?

I purchased OS X Server 3.2.2 in August and after I updated to OS X Yosemite Apple wants me to pay $19.99 again? Why didn't they say that the app was going to be obsolete in a month before a wasted my time and money??? Is there a way to get a free upgrade?

It seems they do warn you before you install Yosemite.

I have recorded a vocal track, but have no playback sound. The meter shows it's there, but no sound even after un-muting the track. I'm using Garage Band 10.0.2/Mac Mini ~Thanks

I have recorded a vocal track, but have no playback sound. The meter shows it's there, but no sound even after un-muting the track. I'm using Garage Band 10.0.2/Mac Mini ~Thanks

Check the output settings in GarageBand's preferences > Audio/Midi pane.
And in the System Preferences > Sound panel.
Also check the settings in Audio Midi Setup Utility.

Itunes purchased tv shows wont sync

i have an 80 gig 5th gen ipod and i bought my first set of tv shows from itunes and they wont sync to my ipod. i have ripped some of my show and put them in the tv show folder and they work but the purchased one will not transfer. what do i need to do to fix tis

With the iPod connected to the computer, select the iPod device and then select the TV Shows tab. Confirm that you're configured to sync the TV shows.

Purchased music wont transfer to 1st gen ipod shuffle or click wheel ipod

I have read all the posts I can find about this problem and i cant find any solution. My 20 gig iPod wont accept any song that was purchased from the itunes music store and neither will my ipod shuffle 1st generation.
iTunes will display the message your ipod software is too old and I should upgrade. Well I cant. The upgrade button is grayed out so no joy there. This happens with both ipods. I have downloaded the ipod shuffle reset utility (old and the more recent one) and the old ipod reset utility says no firmware found. the new utility says cant get a responce from the ipod.
I erased the shuffle in Disk utility and still wont transfer purchased music.
I am using the most recent versions of quicktime and itunes and I am totally up to date with my apple upgrades.
One final thing. The software version and the serial number of my shuffle both say n/a in the summary tab in itunes.
I am very frustrated by this. I would have thought having a basically new apple computer would mean I would have no issues with this. Any one that can help will be a hero. Thanks
intel macbook Mac OS X (10.4.9)
intel macbook Mac OS X (10.4.9) totally updated software on the intel macbook

Exact same problem here,
can't update or restore - all greyed out.
Shuffle reset tool - says NO FIRMWARE
Robb

Trouble with a 30G video Ipod

Hey all, first time poster here.
I've been browsing the topics, trying to find a solutin to my problem, but nothing so far seems to be the exact problem I'm having, but I've seen some that are close, and tried those solutions to no avail.
Anyway, I recently purchased a 30G Ipod from a friend at work, who claims it was playing just fine until he pulled it out of the docking bay when it said "do not disconnect" and since then, every time he turned it on, it would display the ! next to the folder and turn off. He doesn't have any of the original things that came with it, like the disc, which he assures me would help to fix the ipod if he could get his hands on it, and restore the Ipod.
I brought it home, plugged it in, and was greeted with the same ! next to the folder. For the next two days, I'm 100% sure I've tried every option to restore my Ipod that I could find on the Apple website, so now I'm at the end of my rope.
My problem is that it was displaying the ! , but now I have a new problem. Today I noticed that while my computer was off, my Ipod magically healed itself! It was amazing, usually I got the dull grey "do not disconnect" message flashing over and over, but this time it was the bright white screen, with a color picture of the battery in the top right corner. I turned on my computer, and the Ipod immediately opened Itunes by itself, and started importing all my music into the Ipod. I disconnected the Ipod, and before I could even turn on any music, it froze up. I put it back on the docking bay, and now I'm stuck with "your Ipod is in Ipod recovery mode, please connect it to your computer and run Itunes". Everytime I try to run restore, it shows up with the error "Ipod could not recover because of an unknown error (error 1418)" and it does this every time. I've tried uninstalling, reinstalling, trying it on another computer (not a mac, don't own one or know anybody with one) I've tried everything I could find on the FAQ, including disabling things in the hidden folders and deleting things. I'm out of ideas, I don't know what to do anymore.
I should add that I really don't know much about the Ipod, like what generation it is, or anything like that. all I know is that it's 30G, and it plays video. If there is a way to find out more information about it, I'd appreciate it, and please, if you have any suggestions, I'd GREATLY appreciate your help. If you need to know the specs of my computer, I'm currently using A custom PC, with Windows XP (with all the latest updates).
Thank you for taking the time to read this long post.
Windows XP
Windows XP

Jeff has asked some good questions, and I hope you have the SP2 service pack installed, or the proper drivers for the Ipod may not be installed. I assume you have the proper USB cable, and it seems like your Ipod is not sufficiently charged (I.E. the battery symbol). I would suggest purchasing a portable AC charger for it and plugging it in overnight. Or, leave it plugged into your computer overnight with the computer on.
I think you probably don't have the proper drivers for the ipod on your computer. Did your computer mention that it found new hardware when you plugged your ipod in for the first time? Did your computer then ask you to restart it? It seems like your computer did install the drivers, and this maybe why the Ipod started working but the battery was too low. (Assuming you have SP2 installed)
1)Connect the Ipod, Run the Add Hardware, and see if it finds the Ipod. If yes(assuming you have SP2), then this may solve your problem when it installs the proper drivers.
Restart your computer and do not disconnect the Ipod.
2) Your IPOD battery needs charging. This is the reason you got the color battery symbol.
3)Make sure Itunes and the IPOD updater are installed.
Run the updater, and follow the instructions. If it asks you to plug it into an outlet to complete the update, then you need to buy the AC charger. You can get it at most of the computer superstores and Best Buy.
4)Also, make sure the "Do not disconnect" symbol is gone before you disconnect your Ipod from your computer. If it does not disconnect on its own after updating it with Itunes, then you need to manually eject it from itunes from before removing it from the computer. Otherwise you will corrupt the file system.
Charge the Ipod overnight(at least 8 hours), and then press the menu and middle button until it restarts, and start trying to get it to properly work with your computer.
(I'm out of breath so, Good Luck) smile.

ITunes displays new Album Artwork but wont transfer all artwork to iPod?

I have manually updated my iTunes library to show the new full resolution album artwork, but after updating my iPod almost half of the images didn't transfer to iPod?

If itunes decides that the ipod can't play a vid it won't send it. The ipod won't necessarily play every mp4 video, the specs are:
H.264 video: up to 768 Kbps, 320 x 240, 30 frames per sec., Baseline Profile up to Level 1.3 with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats
MPEG-4 video: up to 2.5 mbps, 480 x 480, 30 frames per sec., Simple Profile with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats
Try right clicking on one of the bad vids in itunes and select "Convert to ipod format" - this should make it ipod compatible.

Purchased tv shows wont transfer to 30g video ipod even after latest update

Similar Messages

Maybe you are looking for