Purchasing 11i: How to change decimals for unit price of BPA?

Our standard purchase orders use 5 decimals.
Our Blanket Purchase Agreements use 9 decimals and this creates some problems for us. How can we change this to also work with 5 decimals?
I assume it is a system profile? But i cannot find such a profile?
Please help
Regards
Johann

Moderator message - Cross post locked
Rob

Similar Messages

  • How to change workflow for expired qualification in HR Module

    Hi,
    My question how to change workflow for expired qualification in HR Module.We need to when date is expired tcode OOQA that system will check and that time workflow should be triggred.
    I have serached sap help but i am not understand please below mention URL for SAP help
    Link: [http://help.sap.com/saphelp_47x200/helpdata/en/ee/f4c9cafbab11d29ea40000e8215202/frameset.htm]
    Please explain step by step how to trigrred workflow for expired qualification?
    Please this problem is high and try to solve it.
    Thx!
    Sachin

    Hi,
    Why do you want to trigger a wflow and what do you want to do with this trigger. Can you give more details of your exact requirements.
    But, if you are looking for how to trigger, you can write a small ABAP pgm and schedule it as a job every night. THis job basically reads the table P1000-ENDDA for expiry date and if it reached today, then you can either trigger the wflow with SAP_WAPI_START_WORKFLOW or use SAP_WAPI_CREATE_EVENT to raise your custom event(for Business Obj. BUS7018, i think this is your BO and there are no std events right now, so you will ahve to add your custom event by extending BUS7018 to ZBUS7018).
    Hope I am clear and this helps and if you need more details, reply.
    venu

  • How to change tablespace for a table in 10g?

    Does anyone know how to change tablespace for a table (like changing tablespace for an index [alter index ... rebuild tablespace ... ])? Many thanks in advance.

    alter table tablename move tablespace newtsname;
    You need to rebuild the indexes after the move.

  • How to change password for itunes

    HELP PLEASE!
    DOES ANYBODY KNOW HOW TO CHANGE PASSWORD FOR ITUNES?

    Follow the instructions here.
    Apple ID: Changing your password

  • How to change password for BtOpenZone?

    Hi,
    Does anyone know how to change password for BtOpenZone? I have tried the following link and it is not working with me....
    http://www.btinternet.com/new/content/mybti
    Last time I have to ring BT to change the password, but I want to do via some control panel.
    Thanks
    Kam 
    Solved!
    Go to Solution.

    If you're a BT Total Broadband customer and you want to change the password, you can go to btyahoo.com, log in there and change your password. The primary email account and the FON/OZ logins are linked. if you change your email password, your FON/OZ password will also change.
    if you're an Openzone only customer, you can log into your control panel on the main page and change your password there.

  • How to change password for sidadm user on HP-UX

    Hello
    How to change password for <sidadm> user on HP-UX

    Hello Jan,
           1.      Log on to the operating system with the <sid>adm user.
           2.      Open a shell.
           3.      Enter the command passwd.
           4.      Enter the old and new passwords
    Rohit

  • How to change password for apple user id

    how to change password for apple user id

    If you can't remember your current password then you should be able to get it reset via this page : http://iforgot.apple.com
    If you know your current password then on your phone you can try tapping on your id in Settings > Store and you might be able to change it on your account's screen, or on your computer's iTunes you can log into your account via the Store > View Account menu option and change it on there

  • How to change password for parental controls

    how to change password for parental control on macbook pro

    If you can't remember your current password then you should be able to get it reset via this page : http://iforgot.apple.com
    If you know your current password then on your phone you can try tapping on your id in Settings > Store and you might be able to change it on your account's screen, or on your computer's iTunes you can log into your account via the Store > View Account menu option and change it on there

  • How to change password for  XELSYSADM user in OIM?

    Hello Gurus and Experts!
    How to change password for XELSYSADM user in OIM?
    Your help is appreciated.

    Follow the undermentioned steps to change the password:
    1) Change the password from oim Design Client as usual.
    2) Open xlconfig.xml present in <XL_HOME>\xellerate\config folder.
    3) This step is optional and should only be used if you have a <XLPassword encrypted> tag in the <Scheduler> section. In the scheduler section, change the encrypted="true" to encrypted="false" and replace existing encrypted password with new clear text password, as shown below:
    <Scheduler>
    <XLUserName>xelsysadm</XLUserName>
    <XLPassword encrypted="false">NEW_PASSWORD</XLPassword>
    </Scheduler>
    4) Restart server.
    Now login with the new password.

  • How do i able to get data for unit price using RSEG table?

    Dear All,
    How do i able to get data for unit price in RSEG table?

    Hi Thiru,
    Please check the logic in thread http://scn.sap.com/thread/1347964
    Hope this helps.
    Regards,
    Deepak Kori

  • LIV - credit memo : error message shown for unit price variances

    hi
    In LIV for Credit Memo, there is no warning nor error message shown for unit price variances (price different from that in PO).  Request not allow to have unit price variances for Credit Memo. pls advice how can i do it
    thanks

    Hi,
    If you are posting a credit memo against a PO you cannot post it for MORE than the value of the PO, the system gives you the message that says something like, the value entered is higher than the PO value and so the PO value has been used.
    Is this giving you a particular problem?
    remember that youare generating the credit memo and so you can ask the vendor for whatever you want (although you may not actually get it). It is not like entering an invoice where the vendor is specifying the values.
    Steve B

  • SetBackColor for Unit Price !?

    I'm asking because I'm not sure what is wrong.
    See the 2 lines below, the 3 is the ItemCode and the 17 is the Unit Price
    The back color works for the ItemCode but not for the Unit Price.
    I don't know if it's me doing something wrong  ! 
    oMatrix.CommonSetting.SetCellBackColor(iDetailRow, 3, GetColor(Color.Orange));
    oMatrix.CommonSetting.SetCellBackColor(iDetailRow, 17, GetColor(Color.Orange));

    "3" isn't accepted by SetCellBackColor as it's a int colNum
    SAP gave me 20 for Unit Price and it works but it doesn't make sence and I don't know where they took 20 from SAP
    when I go in the Form Settings the order is 17 for UNIT PRICE
    They even gave me a code to find the column by the title and yet it works and it finds 20 for UNIT PRICE but
    how and where if you're a user and not a machine to now that 20 is UNIT PRICE ?
    VERY CONFUSING !

  • How to change arround 1500 items price in one times in vk11 tcode

    Dear All,
    can anybudy know How to change arround 1500 items price in one times in vk11 tcode
    or any other method to change at a one time
    Regards
    Pritpal Mehru

    hello again, friend.
    LSMW is a t-code and it is a tool for uploading master data and condition records.  the general steps as follow:
    1.  execute t-code LSMW
    2.  after entering the title of the PROJECT, the system will ask you what transaction to record.  in this case, it is VK11.
    3.  you will go through the process of creating a price condition record just like normal.  after you finish the transaction, you will now select the fields that you will use for your template.  you will have to take note of the technical names of the fields (online help will be available, so don't worry).
    4.  you will also specify the name of your template, which the system will use in the actual upload.  at this point you can choose to save and work on your template in a separate screen.
    5.  now you create your price condition template in an EXCEL file.  how many fields you specified in LSMW is how many columns you will need in the template.  for example, you will have columns such as SALES ORGANIZATION, DISTRIBUTION CHANNEL, MATERIAL NUMBER, PRICE, VALIDITY DATES, etc.  you then enter your data in this template.  if you have 1500 prices, then your template will have 1500 or more lines.
    6.  after saving the template, you will save this into a delimited text file.
    7.  go back to your LSMW, select this file, process it.  the system will do the VK11 for you using the info from your template.
    try this in a sandbox of DEV environment.  it is difficult only at the beginning.  with practice it becomes easier.  your customers will love you for it.
    hope this helped.  please reward if it did.
    regards.  thanks!

  • How to change spare part item price in sap

    Dear All,
    Can you tell me how to change spare  part item price in sap ,
    like in our company hike new price of spare part item so how can update a new price in bluk order
    thankx and Regards
    Pritpal

    Hi,
    Try MR21 & MR22.
    First assign the appropriate G/L account against the account key for the same.
    Regards,
    Sourabh

  • SapScript: How to change write format for Unit Price

    Hi Experts,
    I have created a sapscript form in English and Japan language.
    In the Japan form, the unit price and quantity are being display as 123,456.78.
    but in English form, the unit price and quantity are being displayed as 123.456,78.
    I am also using a custom program for my logic but when the English form is used, when i write netwr field in a character field,
    it is defaulted as 123.456,78 even inside the program. How can I changed this to 123,456.78?
    My user data default for value display is 123,456.78.
    The print program for the form is a standard program used for PO (ME2*N) printing.
    Thanks in advance!

    Hi Breakpoint,
    My user data default for value display is 123,456.78 already but when using English form it is not display as such.
    Need help.

Maybe you are looking for