Purchasing a new Boot drive  for Power PC Mac dual G5 2.7 GHz ( early 2005)

As I’ve mentioned I have Power MAC Dual G5 2,7 GHz( early 2005)
I’m doing “ erase and install” on my boot drive Caviar and starting from the scratch - Basically doing whole new setup with my music apps,sample libraries and back up.
To describe it little better - My plan is to move Caviar to second slot ( mostly will be used for I-tunes,documents,photos and maybe some back up) and purchase new boot drive.
All my audio and music samples I’m running from 4 bay ( sata ) exterior hot swap enclosure with Lycom card so my boot drive will be clearly for OS X and applications.
Now - I’ve gone through a big research and even though I have not really make up my mind about my purchase - here is what I’ve found out so far.
As a boot drive I’ve been considering following ( I’m adding my comments as well)
1) My first pick was Hitachi T7K500 320GB SATA II HD 16MB Cache -
seemed to me like a very good choice for a boot drive since it has a great random access .But after reading review in “ AMUG reviews “ Using a Hitachi T7K500 320GB with a Mac Pro I was not that sure .Apparently They don’t recommend Hitachi T7K500 for internal Mac Pro usage since it is slower without using SATA host adapter. But that is Mac Pro - I have Dual processor so it might be different?
Second choice was
2) Maxtor MaXLine III 500GB or Maxtor MaXLine Pro 500 GB
here I’m not sure -some guys don’t really recommend this brand but in bunch of online reviews I’ve read it was mentioned as a very good choice for a boot drive .
I’ve been told that this drive is too noisy and too cheap which I think is not a bad thing though.
And finally
3) Raptor 74 GB or 150 GB
Everyone knows those drives are fast
Downside is that size is not very big ( just my OS X will be around 50 GB)
plus 150 Gig won’t work natively on my G5 without host card which would be another extra expense .
Maybe one more thing to add - I have not consider neither seagate drives (since random access speed is not that great) nor pairing any of those previously mentioned drives into raid 0 configuration .
So basically that is my selection.I’m trying to pick up drive which would work natively without PCI - X card and would be reliable and fast.( Only if I would have no choice - Than I would probably buy a host card )
Also I’m not sure whether for example in the case of hitachi ( or even other brands ) would be smarter to go with bigger size - maybe 400 or 500 GB for a boot since all drives getting slower as they get filled up.
I would really appreciate if anyone can give me a feedback as far as what drive would be the best choice in my case.
Thank you very much for your time
Milan

OK - I'll try that one more time - second choice is Maxtor Maxline III 500 GB or maxtor maxline Pro 500 GB.

Similar Messages

  • Creating A New Boot Drive For Mac Pro Desktop

    I have a Mac Pro 1,1 using Lion:    
    I would like to create a new and bigger boot drive but having not done this before I would appreciate any direction that would make this as painless as possible.   I will continue to use Lion but am a little lost when it comes to doing this with the download process of Lion as well as transferring what has been created on the current HD in the MacPro.  I have a new WD Black 2 TB SATA that I would like to use as the new boot drive.  Again, thank you for the help.

    Don't. Use. 2TB for system. Seriously.
    Use that for data.
    Get yourself a $89 Samsung 840 120GB instead along with Icy Dock $15. You will. Love it.
    You don't need a large drive for the system. All you need to do is MOVE all the data and media files and every thing else, just leave the small 4GB /Users/myuseraccount/Library on the boot drive with the OS and apps. Everything else gets off loaded.
    Leave your drive you ahve now as is for backup. Move data and clone the system.
    Clone your system:
    How to Clone a Volume
    Using Cloning as a Backup Strategy
    See also Erasing a Drive, How and Why to Partition a Drive, RAID.
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    Using Cloning as a Backup Strategy
    http://macperformanceguide.com/Mac-HowToClone.html
    http://www.dummies.com/how-to/content/how-to-partition-your-hard-drive-on-mac-os -x-snow-.html
    http://pondini.org/OSX/DU.html
    How to relocate system and user data to another drive:
    http://support.apple.com/kb/HT4337http://chris.pirillo.com/how-to-move-the-home-folder-in-os-x-and-why/To successfully relocate your operating system, user accounts and data from one storage device to another, meet the following conditions: 
    The destination storage device (SSD drive or hard drive) you are migrating to should be physically located in the same computer.  Moving operating system files from one computer to another computer using software not specifically designed for that computer can cause issues due to software, hardware, and firmware version mismatches.
    Always back up your storage device with Time Machine or Disk Utility before you start.
    Icy Dock $15
    http://www.amazon.com/2-5-3-5-Ssd-sata-Convert/dp/B002Z2QDNE/
    SSD: Samsung 840 EVO 128GB
    http://www.amazon.com/Samsung-Electronics-2-5-Inch-Internal-MZ-7TE120BW/dp/B00E3 W15P0/
    2x2GB FBDIMM DDR2 667MHz @ $25
    http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/

  • Can I create an external boot drive for an updated Mac OS Maverick system?

    I'm currently running Mac OS Snow Leopard (10.6.8) on my 24" iMac and would like to clone my current drive to an external drive & then update that external drive to Mac OS Maverick. First, can this be done to create an external Boot drive for my iMac System? Secondly, can I then select the internal system (OS 10.6.8) or the external drive Maverick OS system at boot time?

    Probably will depend on just what your machine is - i.e. how current and fast is the internal hardware.
    Generally though, the performance booting off a firewire 800 should be fine for most things with little if any system lag.  My late-2008 MBP ( 2.53Ghz core-2 duo, 8GB RAM) runs quite well when booted from a firewire 800 drive (7200rpm - even my 5400rpm portable clone is perfectly useable).
    Just remember if using the external for a long or serious work session, if the power goes out, that external is not going to be powered off battery (I keep my full size external drives plugged into a UPS because of that).

  • Purchasing A New Hard Drive For Old Macbook

    Hey everyone!
    I'm new here. I found an old Macbook of mine—a black Macbook about 12 3/4" across. I got it a while ago, and the hard drive stopped working so I just bought a new computer. But now I would like to have two computers, and I would like to use this old Macbook again. I realize that this old Macbook still works; it just needs a new hard drive. So I was wondering if someone could point me in the right direction of a nice hard drive that I can slide into this black Macbook of mine. I looked online, and I'm afraid to purchase one without the help of someone; I don't know if the size of the drive will fit into this old Macbook or what. So if anyone can help me out, that would be so great! Thanks guys!

    Here are step by step instructions with pictures on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088

  • Where do I purchase a new super drive

    I have been having issues with my super drive for a couple of months now and it will no longer burn DVD's.
    I've tried to fix it and no luck, so I want to purchase a new internal drive for my G5 and replace the old one.
    Can someone tell me, where I can buy this and what some models are that work with the G5's?
    My current model only burns at 4x so it would be great to improve the speed if my G5 Dual 1.8 will support this.
    Thanks a lot,
    Chris

    Have a look at the available options at OWC. The Pioneer DVR-112D will be a drop in replacement. If your current drive is also a Pioneer, you can reuse the standoffs (which raise the drive up to clear the drive bay door).
    With any drive you purchase, you'll need to pop the front bezel off of the drive tray. It should lift up and off.

  • On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
    Power on the computer and insert the DVD immediately.
    Hold down the 'C' key to boot from the Snow Leopard DVD.
    http://support.apple.com/kb/ht1533
    After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
    You'll likely need to partition and format the new drive before it's recognized.
    http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
    (Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.)

  • Need a new hard drive for T43...

    I need help finding a new hard drive for my T43.  It appears that my hard drive is starting to fail.  It just seems to not power up all the time during boot up or it just dies after it's in used for a little while.  The T43 seems to only be compatible with certain types of hard drives though and I can't find any place that still sells them.  Does anyone know of a place that still sells hard drive compatible with the T43?

    Welcome to the forum!
    Any PATA laptop drive will work as long as it's 9.5mm high, but most of today's drives will throw a "2010 error" on boot, which is really not a big deal IMHO.
    The biggest hard drive that won't throw this error is Fujitsu MHV2120AH (120GB/5400rpm) that has been discontinued a while ago. Expect to pay a hefty premium for a sealed one.
    A lot of good info here:
    http://forum.thinkpads.com/viewtopic.php?f=2&t=11059
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • New Hard Drive for HP DV6 & Recovery Issues

    Greetings everyone...  Happy Holidays to all!  
    As luck would have it, on the first day of the Holiday break, my wife's laptop hard drive decided to go on strike - luckily, I could mount the hard drive on another system and get most of the files off that were needed.  In replacing the hard drive and doing my research on the web and on these forums, it appears there is a fair amount of disparity between those having success and complete failure when running the recovery disks after a hard drive failure and, thus far, I am in the second camp (not going as smoothly as advertised).  As a side note, I created the recovery disks from the system upon receiving it and the disks were verified as part of the creation process as being 'good.'
    I am working on an HP Pavillion DV6t, product number XC100AV that originally shipped with a WD Scorpio Blue 640GB drive (WD6400BEVT, 5400 rpm).  We have had this system about 13-14 months (just past that 12 month warranty period) and the system is very lightly used (nightly facebook'ing is about as strenuous as this system has worked).  Since I have a high degree of experience and confidence in working with computers, I didn't have any reservations in going down to the nearest electronics retailer and picking up a new drive to put into the machine.  I picked up a Seagate Momentus XT drive (500GB, 4GB SSD hybrid, 7200 rpm) and put it into the machine in a few minutes, adjusted the BIOS settings to boot from the CD drive and disable the HP Web flash capability, and proceeded to load the CDs through the HP system recovery manager.  The system progresses through the recovery manager without incident or error (indicating the recovery disks are 'good').  However, when booting the system after the recovery CDs complete, I get the nice message that no boot file can be found.  This tells me that there is no MBR (master boot record) created during the system recovery process and there is no way to boot into the operating system.
    Given this information, I have a few questions to those experienced in this area:
    1.  Am I required to contact HP to purchase a new hard drive to get the recovery to work properly?  To put it another way, is there an HP 'tatoo' (as alluded to in other posts around the Internet) that would prevent me from using a HDD that is technically compatible?
    2.  If the answer(s) to #1 is no, what am I missing in getting the recovery to work properly?  Are there any MBR utilities that I should use in addition to the recovery processes outlined by HP?
    3.  Am I required to purchase the same HDD (size, manufacturer)?  I decided to stay away from WD after it failed after only 13 months of light use...
    Thank you in advance for your advice!

    You're very welcome.
    That happened to me too (after testing windows 8), and the only way I was able to get W7 back on my PC was to install XP, and have it format the drive.  I let XP install and didn't bother installing any drivers.
    I booted from the W7 disk and it worked without incident.
    You have to have advanced knowledge to install XP on a modern notebook, because you need to know how to install the necessary sata drivers in order for XP to even see the drive.
    I noticed that MS has re-established the W7 ISO file download links again in the last day, so see if you can make your own disk again and try using that to install windows and then try to use the recovery disks if you want.
    http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-Multiple-Languag...

  • Installing New Boot Drive ?

    Sorry to double post but, had this in the wrong section.
    Hello, fellow G4'ers.
    Mine is G4 MDD 867 Dual CPU and has a giga 1.4 CPU upgrade, 1.75 GB RAM.
    ATI 9600 Mac OS X (10.4.11). 400W PS
    Still runs well enough for my purposes.. besides drives are pretty cheap these days, so why not.
    I Have 3 drives total now. 2 are Internal, 1 is External (FW400).
    1 - (original) Boot drive 60 gig (20 GB avail.)
    2 - Maxtor 200 gig with 2 partitions,
    a) 40 GB partition w/ 40 GB avail. and
    b) 160 GB partition w/ 90 GB avail.
    I also have a 250 gig FireWire External (bootable) drive that has a cloned, used CarbonCopyCloner,
    backup of the main boot drive and still has ~ 180 GB avail.
    I only want to replace the original (aging) boot drive BEFORE it goes bad.
    I read somewhere here that a separate partition for the system alone, could b a good idea. can anyone confirm this for me ?
    I got and installed the 2nd drive myself (Maxtor 200 GB), so I think I can do this.
    I need to be sure, as to a plan of attack here (software-wise), and appreciate any input as to a good way to do this.
    I'm sure there are a few ways it can be done.
    My best guess's are;
    1-get the new ATA drive (500 gig drives can be had for under $100) Any hot tips here ???.
    (How's this sound "500GB Western Digital Caviar SE16 7200rpm 8.9ms 16MB Cache UltraDMA 100/ATA 5 HD" ?????
    2-Check and be sure a good bootable backup of boot drive exists on the External drive.
    3-Shut down and physically install the new drive, discard old drive, plugging it into the same place the old one was in. (I guess this is right, but not real sure about this, any jumpers to move/check ??? , ) any other possibilities here ?
    Now the variables/my best guesses :
    4.a ) Power On, Startup use the (C key), and boot with my Tiger Install disk, and install a fresh Tiger OSX 10.4.xxx system onto the new drive.
    QUESTION; Not real sure how to get this updated to 10.4.11 yet, but I think there's a "Combo" that will bring it right up to 10.4.11, but I'll need my internet connection for that.
    Perhaps boot with the clone/external and download the update file to disk and install it that way ??? Definitely need some help with this .
    4.b ) I could just copy/Clone in reverse from External to the new drive (I should think a clean install would be better here as to not keep any system flaws from my existing system, including that messy stuff that the latest security updates introduced. But, this could work, right ? Perhaps not ? I think I would really like to have a New Clean system as the Original HD may be weak/flawed.
    4c ) Perhaps there's a function in Disk Utility that can help with doing all this, Restore? Archive ? whatever ?
    OK. That's about where I am here. I'm not really a noobey, but I just never had to do all of this and want to be sure of a good plan before I get started, and don't want to overlook anything.
    Thanks very much

    Good News here, just to finish up.
    I Got a FW external. Cloned boot drive to it (CCC 3.1.2). Did a archive & install on the external clone with Tiger DVD, and updated it to 10.4.11 + all misc updates. Fixed permissions between all phases. Deleted previous sys folder. Rebuild & optimize w/DiskWarrior. Pull old boot drive, install new WD 320 GB, connections were all "Cable-select", no master/slave stuff. Started up with tiger DVD and formated the seen new drive. Booted from external, cloned clean, archived/new SYS to new boot drive. Done.
    Only a few small probs. with prefs. here and there, but all back and running fast & smooth and now I even have a regular backup plan to the external.

  • I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

  • I HAD TO BUY A NEW HARD DRIVE FOR MY LAPTOP. I AM TRYING TO RE-INSTALL MY ADOBE PHOTOSHOP ELEMENTS 12 BUT IT KEEPS SAYING MY SERIAL NUMBER IS INVALID. WHAT DO I DO?

    I HAD TO BUY A NEW HARD DRIVE FOR MY LAPTOP. I AM TRYING TO RE-INSTALL MY ADOBE PHOTOSHOP ELEMENTS 12 BUT IT KEEPS SAYING MY SERIAL NUMBER IS INVALID. WHAT DO I DO?

    jessicar
    Just user to user....based on past and current history, Adobe Tech Support is not going to help you with a technical issue which is preventing you from using your purchased serial number for Photoshop Elements. Version 12 is not the current version. And, the Adobe Tech Support is limited even for the current version which is 13. If this matter involves a purchased activated serial number trapped on a crashed computer while you are trying to install on a 3rd computer, then probably Adobe Chat Activation can be of assistance. If that is the case and you want to explore that possibility, then click on the following link
    Contact Customer Care
    Photoshop Elements
    Adobe ID, Signing In
    Adobe ID, Sign In, Account Help
    Chat Panel
    If the above link does not hold its set, then you will need to navigate to the Chat Panel using the above titles as guides.
    Are you getting one of those "too many computers with your serial number" messages? Then the above should apply to your situation.
    Before the above consider....
    a. For Photoshop Elements technical issues please post your question in the Adobe Photoshop Elements Forum. Somehow your
    question got posted in the Adobe Premiere Elements Forum.
    b. Have you verified your Photoshop Elements serial number at the Adobe web site (http://www.adobe.com) - after signing in with your
    Adobe ID and Password, type My Products in the Search field and follow the path to your product in My Products. Click on Adobe
    Photoshop Elements 12 in your list to reveal the serial number.
    c. Do the install with antivirus and firewall(s) disabled.
    ATR

  • In need of a new hard drive for my old G5 computer

    Hello there, I'm not as savvy as you are with computers but I am in need of a new hard drive for my old G5 computer that my husband uses.  His crashed.  If you did it all over again would you buy the same new hard drive?  If so, where did you buy it?  I don't even know where to start and was SO happy to find this recent post on installing new drives into the G5.  Any advice would be much appreciated.  Thank you!
    <Title Edited by Host>

    I actually just ran across this hard drive oddity for the first time myself just yesterday. It seems that some older Macs may not be able to use the newest SATA interfaces on some hard drives.
    I an attempt to not get overly technical, SATA is the current interface type on computer hard drives. You can get some additional information from Wikipedia at http://en.wikipedia.org/wiki/Serial_ATA. There are currently three revisions, SATA-1 (the oldest), SATA-2 (the current version), & SATA-3 (the latest and greatest).
    So what happened was that my G5 could not use the SATA-3 drive I purchased because the computer could not support the SATA-3 standard. It was possible to "slow down" one of the other test SATA-3 drives to make it work like a SATA-2 and so it may be possible to do the same to other hard drives.
    To answer your question, I would NOT purchase the saem hard drive for my Mac as it does not work for this older Mac.
    My suggestion, if you can find one purchase the same hard drive that was in the computer. That way you know it is compatible. If you would like to upgrade, you will have to do some looking. Although I cannot recommend a specific drive, my two favorite companies are Seagate, www.seagate.com and Western Digitial, www.wdc.com. You most likely have a 3.5" drive, if you have a desktop, 2.5" for a laptop. WD has the Cavier line and Seagate has either Barrcuda or Momentus. What you are looking for is capacity.
    So, both Seagate and Western Digital are good. You need a 3.5" drive for a desktop or 2.5" drive for a laptop. Stick with a SATA-2 drive also known as a SATA 3Gb/s drive for compatibility. Get a drive that is 7200 RPM or higher. Finally purchase the largest capacity at you can afford. Amazon is a good general place to been looking.
    KWCitizen_Apple

  • HT4889 Replacing System hard drive with a new one. How to get everything over to the new boot drive?

    Replacing System hard drive with a new one. How to get everything over to the new boot drive? Should I use Carbon Copy or does apple have a better untility to do this?
    I can't get my current system drive (OSX 10.8.3) to start on the first try. I always have to shut down and restart again to finally see the Apple logo.
    Have used disc utility to repair the disc and permissions several times and that works. The next time I boot up, it works fine and I get the apple logo, but then the second time I boot up, it's back to the blank screen again and it only boots after the second try.  I have tried this repair three different times now always with the same result. Works right the first try (after the repair) then from the second time on it doesn't work. I just get the white screen until I reboot a second time.
    Thinking I should change drives but what's the easist and best way to move everything over to the new drive so it will boot correctly with all my data on it. This is the system drive for a Pro Tools 10HD setup. MacPro 3,1 with 16 gigs ram and OSX10.8.3 on it.
    Thanks for any help!

    If you have a time machine back up of your current drive you can do this
    Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see  a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
    From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
    Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
    There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it.

  • I have a MAC Pro from 2011 currently running MAC OS 10.9.5.  This weekend I cloned the MAC HD drive to a new SSD drive for improved performance.  The clone was completed successfully with no errors.  After the clone completed I successfull restarted my sy

    I have a MAC Pro from 2011 currently running MAC OS 10.9.5.  This weekend I cloned the MAC HD drive to a new SSD drive for improved performance.  The clone was completed successfully with no errors.  After the clone completed I successfully restarted my system using the SSD as the boot device.  I then successfully tested all of my products, including Photoshop CS6 and all of its plug-ins.  I successfully tested the key features that I frequently use.  Today while attempting to launch Photoshop CS6 a message is being displayed indicating that a scratch disk cannot be found.  All drives are available on the system via the Finder and Disk Utility.  I can access all drives including the old MAC HD which is no longer the boot device.  I've even attempted to launch Photoshop from the old device yet the same error persist.  Is there a way to review/edit/change Photoshop preferences if Photoshop doesn't launch?  I've even restarted my system several times to see if that would resolve the issues.  Does anyone have any recommendations for this issue?  Have you previously address this issue? 
    Thank you Gregg Williams

    Boilerplate text:
    Reset Preferences
    http://forums.adobe.com/thread/375776
    1) Close the program and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (not reversible)
    or
    2) Move the Folder. See:
    http://www.bugge.com/Family-and-friends/Illy/illy.html
    --OB

  • Need to buy new hard drive for my 17 iMac G5 pre-isight

    I need to get a new hard drive for my imac g5. I went to staples and picked up a maxtor sata hd but the screws aren't in the correct place as the original HD. Does anyone know the exact HD that came with the computer and where I can purchase one?
    Best,
    Ken

    I think I figured it out. The reason why the screws aren't in the right place is because the original HD that comes with the computer has an external housing around it. I think what I need to do is just take that housing off and put it on the new HD that I purchase.

Maybe you are looking for