Purchasing Data Load Issue - 2LIS_02_SCL, 2LIS_02_ITM, 2LIS_02_HDR
Hi Friends,
I'm facing a problem extracting data related to a different Purchasing Organisation using these extractors.
Currently we extract data related to PO 1000 and would like to extract even for 3000.
Where should I check for the restrictions; do I need to change some config settings?
Any help would be appreciated.
Thanks in Advance
Aj
Hi,
There are 2 places ,where we need to chcek this one.
1) Delta init package .But there may chance of selection change after delta init was over. So check the Delta init Request in monitor of biw .
2) Selection was taken in the filling steup table iteself, But unfortuanately we donot have option to know this.But if you have done like this ,you may be getting records with other POrganization also into BIW.
With rgds,
Anil Kumar Sharma .P
Similar Messages
-
Data Load Issue "Request is in obsolete version of DataSource"
Hello,
I am getting a very strange data load issue in production, I am able to load the data upto PSA, but when I am running the DTP to load the data into 0EMPLOYEE ( Master data Object) getting bellow msg
Request REQU_1IGEUD6M8EZH8V65JTENZGQHD not extracted; request is in obsolete version of DataSource
The request REQU_1IGEUD6M8EZH8V65JTENZGQHD was loaded into the PSA table when the DataSource had a different structure to the current one. Incompatible changes have been made to the DataSource since then and the request cannot be extracted with the DTP anymore.
I have taken the follwoing action
1. Replicated the data source
2. Deleted all request from PSA
2. Activated the data source using (RSDS_DATASOURCE_ACTIVATE_ALL)
3. Re transported the datasource , transformation, DTP
Still getting the same issue
If you have any idea please reply asap.
SamitHi
Generate your datasource in R/3 then replicate and activate the transfer rules.
Regards,
Chandu. -
I am having an issue where the data that drives a tilelist
works correctly when the tile list is not loaded on the first page
of the application. When it is put on a second page in a viewstack
then the tilelist displays correctly when you navigate to it. When
the tilelist is placed in the first page of the application I get
the correct number of items to display in the tilelist but the
information the item renderer is supposed to display, ie a picture,
caption and title, does not. The strange thing is that a Tree
populates correctly given the same situation. Here is the sequence
of events:
// get tree is that data for the tree and get groups is the
data for the tilelist
creationComplete="get_tree.send();get_groups.send();"
<mx:HTTPService showBusyCursor="true" id="get_groups"
url="[some xml doc]" resultFormat="e4x"/>
<mx:XMLListCollection id="myXMlist"
source="{get_groups.lastResult.groups}"/>
<mx:HTTPService showBusyCursor="true" id="get_tree"
url="[some xml doc]" resultFormat="e4x" />
<mx:XMLListCollection id="myTreeXMlist"
source="{get_tree.lastResult.groups}"/>
And then the data provider of the tilelist and tree are set
accordingly. I tried putting moving the data calls from the
creation complete to the initialize event thinking that it would
hit earlier in the process and be done by the time the final
completion came about but that didn't help either. I guess I'm just
at a loss as to why the tree works fine no matter where I put it
but the TileList does not. It's almost like the tree and the
tilelist will sit and wait for the data but the item renderer in
the tilelist will not wait. Which would explain why clicking on the
tile list still produces the correct sequence of events but the
visual component of the tilelist is just not working right. Anyone
have any ideas?Ok, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.
-
I am new to Demantra. Have installed a stand alone Demantra system in our server. In order to load data, I created a new model, defined item and location levels, then clicked on 'Build Model'. The data is loaded into 3 custom tables created by me. After creating the model, I cannot login to 'Collaborator Workbench', it gives message 'There are system errors. Please contact your System Administrator'. Can anyone please tell me what I am doing wrong and how to resolve the issue.
ThanksOk, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.
-
Hi.
We have been experiencing some issues with delta extraction of purchasing data, using 2LIS_02_ITM and 2LIS_02_ITM.
In particular, the posting date's field (BUDAT) is not always filled: for example, I noticed that when users set the final delivery flag even if the purchase delivered quantity does not correspond to the whole order's quantity or the flag has been set later than the change of the delivery date, the field (BUDAT) in the delta queue is not filled.
By this way, the field may be overwritten: however, we need to keep the posting date value.
I am wondering whether I am correct and, in this case, it is possible to keep that value: however, it seems that the only way is to use a full extraction of data.
Thanks a lotRoberto Negro,
While filling setup table by using T-code OLI3BW (Purchasing) it is taking very long time.
Please let me is there any way to rerduce this time.
We are at BW 7.3 version.
Regards, -
Error in 0EMPLOYEE Master Data Load Issue
Hi,
We have 0EMPLOYEE Master Data. Due to our new development changes ralted to 0EMPLOYEE, we have scheduled 2 new info packages with Personnel number range. While creation of infopackages, we forget to main time interval from 01.01.1900 to 31.12.9999. Instead of this, the default range was selected as 24.04.2009 to 31.12.9999. Because of this selection in InfoPackage, the Employee Master Data Valid from date was changed to 24.04.2009 for all the employees in the master data after the data load.
Even after i change this selection properly and loading the data also, its not correcting with correct valid from dates.
Can you please advice, how can we fix this issue ASAP as its a production issue?
Thanks!
Best regards,
Venkata> Even after i change this selection properly and loading the data also, its not correcting with correct valid from dates.
May be for this you have the ONLY option to delete 0Employee master data and reload it again. For this you need to delete dependent transaction data also.
Cheers,
Sree -
Hi gurus,
Presently i am working on BI 7.0.I have small issue regarding master data loading.
I have generic data soruce for master data loading.i have to fetch this data to BW side.Always i have to do full data load to the master data object.first time i have scheduled info package and run DTP to load data to master data object, no issues, data got loaded successfully.whenever i run infopacage for second time and run DTP i am getting error saying that duplicated records.
How can i handle this.
Best Regards
PrasadHi Prasad,
Following is happening in your case:
<b>Loading 1st Time:</b>
1. Data loaded to PSA through ipack.It is a full load.
2. data loaded to infoobject through DTP.
<b>Loading 2nd Time:</b>
1. Data is again loaded to PSA. It is a full load.
2. At this point, data in PSA itself is duplicate. So when you are running the DTP, it picks up the data of both the requests that were loaded to PSA. And hence, you are getting the Duplicate record error.
Please clear the PSA after the data is loaded to infoobject.
Assign points if helpful.
Regards,
Tej Trivedi -
Data Loading issues in PSA and Infocube
Hi team,
i am loading data into PSA and from there into info cube via a DTP,
when i load data into PSA all 6000 records are transfered to PSA and process is completed sucessfully,
When i execute the DTP to load data into info cube the data load process is completed sucessfully but when i observe
the "manage" tab i see
"Transferred 6000 || Added Records 50"
i am not able to get as why only 50 records are loaded into infocube and if some records are rejected where can i find them and the reason for that,
kindly assist me in understanding this issue,
Regards
bshi,
The records would have got aggregated based on common values.
if in source u had
custname xnumber kf1
R 56 100
R 53 200
S 54 200
after aggregation u will have
custname kf1
R 300
S 200
if u do not have xnumber in your cube.
Hope it is clear now.
Regards,
Rathy -
Hi all,
i have some issue with DSO data load , while loading the data data comming to psa perfectly 238 ware comes, but when i trigger that DTP, i am getting only 6 records.
Please any one suggest me.
Thanks,
Gayatri.Hi Gayatri,
if you have already loaded some data to DSO & now if you are trying to do Delta, it is possible that it is taking only Delta Data??
(or)
If you have any Start/End routines/Rule Routines written for deleting any records based on some conditions.
(or)
Also It depends on the keyfield you have selected in the DSO. If the keyfield which you have selected is having some repeated values, then while loading into DSO, it will be aggregated i.e if you have 10 rows for keyfield with value say 101, then in the DSO it will be loaded with only one row with value 101 (10 rows becoming 1 row) & with the keyfigure either Summation/Overwritten depending on what you have selected in the rule details for the keyfigure(you can check it by right click on Keyfigure mapping> Rule Details> here you can see whether it is Overwrite/Summation).
Also as mentioned in above posts you can check the DSO --> manage --> Check the number of rows transferred & number of rows added.
Hope it is clear & helpful!
Regards,
Pavan -
0HR_PY_PP_2 - data load issue
We have 0HR_PY_PP_2 which pulls deltas weekly. On 29th of June the data load failed with error posting runs are locked, try the transfer again. So we did repeat delta. The load was successful but it got 0 records. But the R/3 guys said there was data. When the chain ran next week i.e. on 6th July, it got all the data including the data which was supposed to be brought in the previous weeks load. Did any one face such an issue. We do not understand what could be the problem.Can some one please help.
Thank you!You should have run a normal delta run (no repeat delta) instead for
the following reason:
When you run the extractor in a situation when posting data is
still locked (by the actual posting process), the extractor stops
extraction immediately before it calculates any record and
puts it to the delta queue. However, a "repeat delta" run is a process,
that simply takes whatever it finds in the delta queue for the
specific extractor as the result of the last delta run, and resends
all these records to BW. It does not even invoke the application
specific extraction logic again. In this specific situation
this means, that 0 records are sent again and the timestamp is not
touched.
In other words, the correct procedure after a detection of a lock
of the posting data is to run a regular delta again when posting
has been finished."
regards,
Colin Moloney -
BI 7.0 data load issue: InfoPackage can only load data to PSA?
BI 7.0 backend extraction gurus,
We created a generic datasource on R3 and replicated it to our BI system, created an InfoSource, the Transformation from the datasource to the InfoSource, an ODS, the transformation from the InfoSource to the ODS.
After the transformation creation between the InfoSource and the ODS is done on this BI system, a new folder called "Data Transfer Process" is also created under this ODS in the InfoProvider view. In the Data Transfer Process, in the Extraction tab, picks 'Full' in the field Extraction Mode, in the Execute tab, there is a button 'Execute', click this button (note: so far we have not created InfoPackage yet) which sounds like to conduct the data load, but find there is no data available even if all the status show green (we do have a couple of records in the R3 table).
Then we tried to create an InfoPackage, in the Processing tab, find 'Only PSA' radio button is checked and all others like 'PSA and then into Data Targets (Package by Package)" are dimmed! In the Data Target tab, find the ODS as a target can't be selected! Also there are some new columns in this tab, 'Maintain Old Update Rule' is marked with red color 'X', under another column 'DTP(S) are active and load to this target', there is an inactive picture icon, that's weird since we have already activated the Data Transfer Process! Anyway, we started the data load in the InfoPackage, and the monitor shows the records are brought in, but since in the Process tab in the InfoPackage, 'Only PSA' radio button is checked with all others dimmed that there is no any data going to this ODS! Why in BI 7.0, 'Only PSA' radio button can be checked with others all dimmed?
Many new features with BI 7.0! Any one's idea/experience is greatly appreciate on how to load data in BI 7.0!You dont have to select anything..
Once loaded to PSA in DTP you have the option of FULL or DELTA ,full loads all the data from PSA and DELTA loads only the last load of PSA.
Go through the links for Lucid explainations
Infopackage -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03808225cf5167e10000000a1553f6/content.htm
DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Creating DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
<b>Pre-requisite-</b>
You have used transformations to define the data flow between the source and target object.
Creating transformations-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Hope it Helps
Chetan
@CP.. -
DATA LOAD ISSUE /NO ROLL UP MEMORY
Hello Team,
I have this master data load failure for FIS_BELNR. The problem which I think that everytime it tries to load it runs out of internal table space in the backend. I really don't know what it means. This data is been failing everyday because of the same problem.
I have attached all the screen shots and ABAP short dump analysis screen shots as well. One can read in details why is it failing it tells exactly what the problem is , but how to fix it.
Any more details needed please let me know.
ABAP runtime errors TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Occurred on 25.10.2007 at 02:53:55
>> Short dump has not been completely stored. It is too big.
No roll storage space of length 2097424 available for internal storage.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
What can you do?
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
abap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
Parameters for background processes:
hat can you do?
ry to find out (e.g. by targetted data selection) whether the
ransaction will run with less main memory.
f there is a temporary bottleneck, execute the transaction again.
f the error persists, ask your system administrator to check the
ollowing profile parameters:
ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
bap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
arameters for background processes:
Error analysis
The internal table "IT_62" could not be enlarged further.
You attempted to create a block table of length 2097424 for the internal
table "IT_62". This happens whenever the OCCURS area of the internal table
is exceeded. The requested storage space was not available in the roll
area.
The amount of memory requested is no longer available.
How to correct the error
Please try to decide by analysis whether this request is
reasonable or whether there is a program error. You should pay
particular attention to the internal table entries listed below.
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 2595024
Extended memory (EM)........... 2001898416
Assigned memory (HEAP)......... 1886409776
Short area..................... 16639
Paging area.................... 24576
Maximum address space.......... "-1"
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"TSV_TNEW_BLOCKS_NO_ROLL_MEMORY"
"SAPLZ_BW_EXTRACTORS " or "LZ_BW_EXTRACTORSU24 "
"Z_BW_AP_GL_BELNR"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
ThanksHello,
The memory of your internal table wants beyond the system configured threshold.
Decrease your package size or extend the mentioned parameters (basis task):
ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
abap/heap_area_total (100.000.000 - 1.500.000.000)
Regards, Patrick Rieken -
Hello All,
We had an EPMA Type HFM application whose all dimensions were local, The application validated and deployed successfully.
We tried loading data into the HFM application and the data load was successful.
Then we decided to convert all of the local dimension of the above mentioned HFM application as shared dimensions. After converting all the dimensions as shared dimension successfully we are getting error while loading data into the same HFM application (The app does validate and can be deployed after changes)
The Error log is below:
Load data started: 11/29/2014 10:53:15.
Line: 216, Error: Invalid cell for Period Oct.
ACTUAL;2014; Oct; YTD; E_2100;<Entity Currency>;89920000; [ICP None]; CORP; [None]; [None]; FARM21000;11979
>>>>>>
Line: 217, Error: Invalid cell for Period Nov.
ACTUAL;2014; Nov; YTD; E_2100;<Entity Currency>;89920000; [ICP None]; CORP; [None]; [None]; FARM21000;23544
>>>>>>
Line: 218, Error: Invalid cell for Period Dec.
ACTUAL;2014; Dec; YTD; E_2100;<Entity Currency>;89920000; [ICP None]; CORP; [None]; [None]; FARM21000;58709
>>>>>>
Line: 219, Error: Invalid cell for Period Oct.
ACTUAL;2014; Oct; YTD; E_2100;<Entity Currency>;28050000; E_6000_20; [None]; [None]; [None]; FARM21000;-11979
>>>>>>
Line: 220, Error: Invalid cell for Period Nov.
ACTUAL;2014; Nov; YTD; E_2100;<Entity Currency>;28050000; E_6000_20; [None]; [None]; [None]; FARM21000;-11565
>>>>>>
Wanted to know whether there is something I might have missed while converting local dimension into shared (If there is any sequence to do so,or any constraint that I may not be aware of, though the conversion looks good as application is validated and deployed after changes)
What can be the reason for the failed data load, can anyone help?
Thanks
ArpanHi,
I would look at the account properties for that account (89920000) and see the TopCustom1...4Member. You will find the reason behind the invalid cells.
When you convert the local dimensions to shared, have you checked the 'Dimension Association' for Accounts and Entitities?
It does seem to lose the dimension association if a proper sequence is not followed.
Regards,
S -
Custom object - data loader issue
Hello guys.
I've just attempted to upload a CSV file in order to insert new records to a custom object.
after some tweaking I've managed to get it to work, the log stated 100% success but no new records appeared.
I've ran the data loader for "ordinary" objects (account, parts) with full success.
Any thoughts?
Thanks,
Adi Smulian
[email protected]The dataloader will often state 100% this does not mean that all the records were imported correctly. You will need to go to the data import queue to retrieve the findings of the import this will then tell you if you have any errors.
-
Dears,
we are trying to distrigute the data load functionality to base users.
However it seems that in our tests these kind of users can only use the option "replace by security".
If they try to run the data load without having selected this option, the system returns the following error:
"No write access to period December"
which is very weird as the period December is available for input to the same users through data entry forms.
Please help.This comes up when the user does not have write access to all the intersections in the subcube.
Let's say you have security on Custom 1 with members A, B, and C, and a file with some data.
If John only has Read Access to A, a replace by security will clear and load products B and C only.
If John tries a Replace load, it will attempt to clear all members, however because John does not have access to clear product A, this causes the error you're looking.
Maybe you are looking for
-
Adobe Media Player bug, 2 years on.
I note on the Adobe Develop site for Flex tutorials, the company states: Want to view Flex in a Week videos in offline mode? Follow these steps: Install Adobe Media Player. Click the My Favorites menu at the top. Click Add RSS Feed at the bottom. Cop
-
TS4095 iPhoto quit unexpectedly and erased imported photos
After recently importing photos from my memory card into iPhoto I opted to erase pictures from memory stick because of limited space. When I clicked erase iPhoto quit unexpectedly and now my photos are not in my library or on the memory stick. Are th
-
Using XQuery for transformation in Mediator
I have used successfully XQuery transformation in my BPEL using ora:processXQuery function. But I am struggling to use in my mediator transformations. Can any one confirm whether I can use XQuery for my mediator.. Many Thanks
-
How to Use NDS Tool and create a very simple application
Hi All, Today i have Installed NDS on my machine,but i dont know how to use it,is there any guide inside NDS which gives me step by step procedure to create a simple application. Can any link help me know about this.version of NDS is 2.0.9.Is this
-
I have a subscription to Cloud but I am being blocked out of the programmes
When I try to use the programmes in the subscription package I am getting a message which suggests that I have no subscription - how do I proceed?