Purchasing Document Output - Transaction issue Purchas Order

Hello colleges
we want to use Transaction issue Purchas Order for output PO ,
we find that we cant preview PO from this Transaction before printing  and all so we can not have the possibility to  print some POu2019S  when we print use the output manually.
Can some one help ??
Is there possibility to mark several POu2019S and print them whit one push button ??
Can we have the possibility to preview PO data before print it? We need your advise u2026  
Best regards
Gil Shinar

Hello ,
1.For the first question of printing multiple PO's at the same time you can use the report RSPPFPROCESS using SE38 transaction. You have the possibility of defining the PO number range that you want to output in one Go.
2. There is no possibility to preview and print in 'Issue Purchase Order' transaction. You can achieve the same  only in 'Process Purchase Order' (BBP_POC) transaction .
Best Regards,
Sapna

Similar Messages

  • SD Document  Output Preview Issue

    Hi Respected SD Seniors
    Please help on this output issue.
    I am trying to print my sales documents through STD output types. 
    Want to issue the sales document output to the screen (Preview) or Local network printer.
    Please share with me the functional & technical config steps.
    For example I am using AN00 (STD Quotation Output) for printing the customized quotation document. Every thing is set and I am able to
    Trigger the output successfully. But I can’t see it on my screen and not able to print in my local printer.
    After quotation saved, I can see the AN00 is in YELLOW.  And 2 Output device are exists (LOCAL, LP01)
    Please advice me the printing setup.  Where should I do change to configure my print preview or connect my local network printer as a default SAP R/3. printer
    Please help
    Regards
    Priyan

    Hi Kishore
    Thanks For your Quick Response.
    According to the STD setup of AN00
    Medium: 1
    Dispatch Time: 1 (By Periodic Job)
    Partner Function: SP
    Storage Mode: Print Only
    Condition record has been maintained and the output was triggered correctly upon saving the quotation document. (Process Status: Yellow)
    Then i selected the output and changed Dispatch time to 4 (Immediate). The process status becomes RED once the document is saved.
    Processing log is as follows
    Line1: Object 0000560015
    Line2: Output type: Quotation
    Line3: Processing log for program /SMB40/RVADOR01 routine ENTRY
    Line4: Processing routine ENTRY in program /SMB40/RVADOR01 does not exist
    What is it meaning of Line4: Program is RVADOR01 exists in SE38
    And Form /SMB40/SDQUO_A is existing in the SMARTFORMS transaction.
    And to link the local print to SAP (As an output device), should i need to contact basis or any specific place that i need to setup.
    Please Clarify
    Regards
    Priyan

  • Notification on Receipt and Purchase documents getting fired on Production order having Items with planning method as MRP

    I have written a SP Notification to block adding of documents if block number is not provided. Notification is working fine on Purchase and Receipt documents. This notification also gets executed on Production Order where items included in Production order have planning method as MRP.
    Can anyone explain me the relationship between
    "MRP planned items"
    and
    "Purchase documents (Purchase Order; GRPO; Purchase Return; AP Invoice and Credit Memo) and Receipt of Production."
    Thanks & Regards
    Sonil Bhardwaj

    Hi Sonil,
    Can you post your SP , to look if there is any problem with SP ..
    Regards

  • Purchasing Document of specific Condition Type & Order Type

    Dear Friends,
    Can someone adivse me quickly from which table i can locate the Purchase Order's with document type and specific ITEM level condition type for given period.
    Thanks for your quick inputs.
    Ravi

    First use EKKO table where you can get doc type for listing POs. then copy field value of field EKKO-KNUMV and enter this value in KONV table in Doc. condition. Here you will get PO conditions item wise.
    Hope this solve the issue.
    Parag

  • Purchase Order and GR document Output Determination and creating own logo o

    Can anyone let me know the process of output determination of PO and GR documents.
    Also let me know the way to incorporate my own logo on the documents

    Hi sudip
    For the logo on documents, you have to take help of ABAP ppl.
    Output of Purchase Order
    1. Condition Table
    SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select: 
    Purchasing Doc. Type,
    Purch. Organization,
    Vendor
    2. Access Sequences
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
    *4. Message Determination Schemas*
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
    Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
    Output of GR
    After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document. 
    Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02

  • No value in Purchasing Document field in FBL1N Transaction

    Hi All,
    While executing a report RFITEMAP (Transaction FBL1N), Purchasing Document field is blank while I can see the corresponding Purchasing Document in BSEG table. I have a requirement to show the same in the output. Do we have some settings or ABAP code changes to achieve it?
    Any kind of input would be helpful to me.
    Rgds,
    Khanshi

    Hi,
       Please read note 152335
    You can achieve it via OSS note 112312, but you need to program the BTE as per your business requirements, as stated in the note there is no standard functionality for this.
    You may refer to the following wiki page, it has an example, but in the example, another field was used, maybe it can be useful for you.
    http://wiki.sdn.sap.com/wiki/x/fg3cCw
    regards
    Waman

  • Warning "No message generated for output of purchasing document" disabled

    Hello Gurus
    When a PO in ME21N is created and for some reason there was no output message determined the system should give a warning message "No message generated for output of purchasing document". It causes troubles because buyers don't know when they press SAVE whether output was made or not.
    Please advise where to enable this feature.
    Note: This happens not always and not for every user.
    Great Thanks and Best Regards!

    Hi Oibek,
    This message is automatic , i have not seen any config driving this.
    If there is no output message type maintained for document type or requirement is met , system by default issue the warning message 'No message generated for output of purchasing document' .
    Check the user GUI setting , may be warning messages are ignored for display.
    Logon to SAP -> Customization of Local Layout (ALT+F12)-> Options -> Options tab -> Dailog Box at warning Message ( tick the Check box).
    After this try creating PO from user Login , it should display a dialog box even for warning.
    Thanking You ,
    Sudhakar

  • Purchase document, mail output type, name of the sender in title...

    Hello everyone,
    when a user send a purchase document by mail, the vendor, in the mail title, see the user ID instead if his First+LAST name (field "BNAME" instead of "NAME_TEXT" in the SUO1d, adress part). How can i change that?
    Thanks a lot for answering.

    Hi Friend,
    I think mail is firing through output type.
    Check the program name in NACE transaction. Consult with ABAPer that the program is sending with which header information and changed it accordingly.
    Generaly SO_OBJECT_SEND_AP11 is used for sending.
    Hope it will help you.
    Regards
    Krishnendu

  • How to enable "Billing Document- Issue Output To- Issue output to" in VF03

    Plz let me know how to Enable "Billing Document --> Issue Output To --> Issue output to" in the VF03 transaction (2nd screen).
    After entering the billing doc no. n then pressing enter items will be displayed. Then in the menu bar under "Billing Document" there will be "Issue Output To" option will be there.
    Under that again " Issue Output To " & " Screen" options will be there, which by default displayed in disable mode. Is there any option to enable them.

    Hi
    U need to customize a message type for the billing by  trx NACE

  • Automatic output of purchasing documents

    Hi
    I want to send purchasing documents to vendor automatically when i save the documents.I have maintained all settings ( email in vendor master,communicatio startegy...etc).when i saving the PO document is not automatically ouputing.If go to preview i can able to see the send mail icon and if i click tht icon then document is ouputted.
    how to send the document automatically.
    -Prabu

    Hi Prabu,
    Please Check further with T-Code NACE-- Select Application EF Purchase Order. select button output types ,select your out put type and also check further all processing routines as well as partner function is all entries are there for external send.
    Also check the T code SCOT that is your email is going out properly.
    Also check the Smart for MEDRUCK is it OK. If it is all OK. Your PO output should work.
    Please assign points if this info is helpful to you...!!!
    Regards,
    Rohit Guliani

  • Purchase Order (Purchase docuement type wise)

    Dear,
    We would like to Restrict Purchase order creation without purchase requisition based on various type of Purchase order (Purchase document type wise).
    A user can create some purchase order with purchase requisition as mandatory.
    Some purchase order with purchase requisition as optional.
    Please Suggest,
    Best Regards,
    Swapnil Vaidya

    After making pr field mandatory
    Go to OMET
    create functional Authorization Z
    only click Refrence to pr , Enter your field selection
    Then assign it to user
    parameter EFB -value z
    Vipin

  • Purchase document and service order relation table

    Hi All,
    I am trying to enhance one datasource is there any relation we have for the purchase document and the service order?
    Could you please let  me know
    Thanks
    Srini

    EKPO and ESSR is the relation betqwwen the Purchase order and the service entry/orders.
    Regards
    Srini

  • Is the purchase order number and purchase document numer both are same

    is the purchase order number and purchase document numer both are same or different?
    thanks.

    Hi Sunny,
    Yes they are same. You will be creating a purchase order in ME21n. After creating purchase order you will shown a number for that order.
    Reward points if useful.
    Thanks,
    Swamy Kunche

  • Dear Guru kindly clear my confusion  In Print Output of a Purchasing Document In SAP.

    Dear  Guru,
    I am creating a RFQ AND want a printout for it from the standard  SAP.
    1= I given document no ,purchasing group and in message data given application as EA , Message Type as NEU Processing status 1.but found message
    as no purchasing document found.
    2=Checked NACE the standard output types
    The program ,form routine are above and in partner function the standard partner function is  there.
    3=If i want a new smart forn  then  should i use the same program same form routine , same form  or make a  copy of it and attach a smart form
    to the standard or any other process is there?

    Hi
    See these notes as a checklist
    SAP Note 457497 - FAQ: Message processing in purchasing
    SAP Note 61871 - Output of messages and release strategy
    Check if the message exists in table NAST
    I hope this helps you
    Regards
    Eduardo

  • Output of purchasing documents

    Hi
    Can anyone tell me how to send a purchasing document to the ordering address in the purchasing document without manual intervention nor condition record to maintain.
    -prabu

    By default system will pick the order address.when you are giving the print
    regards
    venkadesh

Maybe you are looking for