Purchasing from second stage dealer

hi,
i am purchasing a  material from a trader(second stage dealer),on that he give mi excise invoice,on which he calculate excise on qty,
material     qty     rate per unit      rate of duty %    duty per unit     EXCISE Dty & Ed cess         amount
cu rod         1733       256.77          8                          19.2                   33273.60                     444991
                                                    2                          .383                      665.47
                                                    1                         .192                       332.74                                                                               
total:34272
the excise which is calculated is based on qty not on amt            
for ex bed - qty*rate
                 1733*19.2=33273.60
the amt i.e 444991 it includes excise value also the rate 256.77 include excise rate also.
how to do in sap b1..
                                                                                thks.

Please check this blog if you have not read it yet:
/people/arshdeep.singh/blog/2008/10/20/defining-a-new-tax-code-in-sap-business-one-2005-b-and-2007-b
If there is no way mentioned in that blog, then you may not have any options to use tax code automatically but manual calculate it.  You could also post it on the product development forum for future B1 release.
Thanks,
Gordon

Similar Messages

  • Second stage dealer process

    Dear All,
    Kindly provide me the detail process of second stage dealer with scenario including configuration required.
    Thanks
    Sandeep.
    Note : Subject is FAQ & widely discussed in forum,
    I request you to search forum before posting,Kindly close this thread.
    Edited by: Jeyakanthan A on Dec 9, 2011 11:54 PM

    Dealer Purchase stage 1 and 2 
    Dealer case mapping in SAP
    If you are using taxinn then in Fv11 you have to maintain excise conditions( BED,ECESS and HECESS) =zero instead of 16 , 2 and 1% and setoff conditions =100% and VAT conditions as per actual percentage for example 4% or 12%
    In purchase order
    Say Your Price is 100
    BED=0
    ECESS=0
    HECESS=0
    VAT 4%
    Total will be 104
    Now at the time of GR you will come to know the actual % is different .and total base value is 80/-
    Put the excise base as mentioned in excise gate pass(80/-e.g)
    Do not forget to tick MRP indicator on miscellaneous tab
    Save your part 1 and post the GR
    also post part 2
    Then at the time of MIRO you will have base value as 100 ( original from PO) so change this value as per excise gate pass that is 80/-
    and press calculate tax. You will get the desired result.
    In addition:
    First Stage dealer is the dealer who purchases from Manufacturer and sell it to you, where as Second Stage Dealer is the person / firm who purchase from First Stage Dealer & sell it to you.

  • Purchase Process from a Second Stage Dealer with Excise Inclusive

    Hi Everybody ...
    I am facing a scenario in two of our projects where the vendor happens to be a second stage dealer. This means that he has actually purchased the raw material from the manufacturer, and paid the excise to manufacturer.
    Now this vendor gives us an invoice where he has included excise duty in the invoice amount. This invoice amount also includes his own commission. The excise duty remains same as was paid to the manufacturer.
    The invoice also specifies VAT applicable on:  'base amount' + 'excise' + 'dealer's commission/profit'
    Now the tricky part is how to separate the excise amount from this? The profit our dealer is charging is separate and non-excisable. Though VAT will be applicable.
    Example:
    Our vendor (a stage 2 dealer) sends us an invoice of Rs. 1180/-  with excise at 8% (say, excluding cess for the time being).
    If excise amount here is Rs. 80/-.
    This gives us a Base amount = Rs. 1000/-
    Dealer's commission/profit = Rs. 100/-
    VAT = 4% of Rs. (801000100 (non-excisable))
    I have not been able to map this into SAP B1 2007B.
    Please suggest if there is a way this scenario can be mapped onto SAP B1 or if it will require some level of customization.
    I need to accomplish this in the next 2 days.
    Thanks for everything
    TC,
    Yatri

    With reference to the query., pls note that you can put the 1180 in the unit price and assessable value or the per unit excise amount*qty in the Assessable value field. In the PO or GRN where you are putting the data be sure to have the Assessable Value and Tax Amount (LC) fields on. So you can put the assessable value and go to the tax amount table and put all the data in the tables and update it.

  • In second stage dealer  po BED,ECES&HECESS value not coming zero

    Dear MM Experts,
    I am doing second stage dealer process.
    As per my knowledge in the purchase order the Excise duties should come with zero value but in my case it is calculating automatically.
    How to maintain this ?
    Please help me out .
    Thanks & Regards,
    Sandeep.

    Hi,
    Refer links for details:
    dealer purchase
    Second stage dealer
    Regards,
    Biju K

  • Rejection to second Stage dealer

    Dear Gurus,
    This is a scenario where we have taken material from a second stage dealer, with all the MRP indicator in GR and all the process as per the dealer CENVAT process.
    Now we to send the material back to the supplier through return PO. Please explain the process.
    Regards,
    Ashish

    this can be done by selecting GET EXCISE INVOICE in J1IS.
    Solved.

  • MIRO problem for Second Stage dealer scenario

    Hi All,
    I have created a purchase order to the trader in which i have taken Inclusive of excise tax code.
    Now while doing MIGO i have make a tick to MRP indicator also change the base value in excise tab & fill the fields of BED, ECS & HECS whatever vendor has pass on to me & post the document.
    Now in MIRO also i have change the base value & simulate the document where the extra G/L of Inventory is appearing.
    That amount is 2 % i.e. CST on GR/IR clearing amount of MIGO.
    Because of that 2% amount less credited to vendor account.
    Please help to resolve the issue.
    Regards,
    Nandkishor Nachane

    Hi,
    Since you are choosing the correct tax code @ the time of MIRO, the actual CST calculation is happening at the time of MIRO. Hence it will get posted to the inventory. Please check your MIGO/GR postings. I hope there wont be any CST calculation during GR since you have mentioned a dummy tax code in your PO.
    Hope its clear.
    As per my understanding the system behaviour is correct.
    Thanks & Regards,

  • Issue related to second stage dealer(excise)

    Hi Expert
    i need to pay vendor amount is 754800( 74000+14800 (2% cst).
    FI document at the time if migo my base value + cst (670110+14800)=684910.00
    when i simulate at the time r miro i got the following entries
    1.vendor a/c debit rs 824690
    2. GR/Ir a/c Cr rs 684910
    3.modvat a/c cr rs 67854
    4.modvat a/c cr rs 1357
    5.modvat a/c cr rs 679
    6.material a/c cr rs 69890
    my problem is the have a look at the entry no 6. which is total of all the excise duty 678541357679=69890.because of this i am paying more ro vendor. and if i subract 824690-754800= 69890.
    Regard
    Nabil

    hey guy
    just tell me at the time of miroin the amount tab which amount i must put.
    1.po amount 740000
    2.excise base value 670110
    3.gr/ir amount value 684910
    if i put the gr/ir amount my total goes up 768920, but i need to pay vendor 754800.
    regard
    Nabil

  • How to Make Including ED value A/P invoice for traders and Second stage delars.

    Hi Expert,
                    We are using SAP B1 8.81 PL10,Here we need to make invoice for 2nd stage delar which is not providing ED rate during quotation they are providing Including ED unit price so besd on this we are sending Purchase order which has tax code like 'ED0(rate is 0)+Vat(it has Rate like 4%,5%),But when they are sending purchase invoice in that Ed amount they are providing.so this ED value where we need to enter.Please give your valuable solution.
    Thanks & regards
    Alok Kumar

    Hi Alok
    In our company second stage dealer ED should be taken in following way.
    1.  Create the Separate GRPO Document for that item and select Tax code for ED then check the Tax only option as below mentioned screenshot. (No stock inward or journal entry impact for this
    GRPO)
    2.  Create Excise document based on above GRPO.
    With Regards
    Balaji Sampath

  • AED for first stage dealer asset

    hi
    we r buying assets from first stage dealer
    we did all configuration regarding AED
    for normal purchase and FSD purchase it is woring ok
    now when we take ASSETS with FSD we r not able to post AED
    errror ,BALANCE IN CURRENCy
    plz hlp
    Edited by: Kunal Ingale on Mar 29, 2010 11:04 AM

    solved with ticking LIABLE FOR AED for specific plant EXCISE REGISTRATIOn
    Edited by: Kunal Ingale on Mar 29, 2010 11:33 AM

  • CST issue in second stage excise scenario

    Hi expert
    while doing a miro, in the second stage dealer po, i am not getting the proper CST amount which i am putting in PO.
    in PO my cst is 2%= 40 on 2000
    at the time of migo i take my base value according to excise base value which is pass on to me.
    i do miro on my excise base value at tht time that happen system take cst on migo base value, and i need cst on my po amount.because of that i am not able to do miro, it showing me difference.
    Regard
    Nabil

    Dear,
    Please follow another following process.
    Go to MIRO>>Fill all required field>>Go to TAX Tab>>Deselect Calculate Tax>>Change the Value as required>>Basic Data>>Copy Balance Amount>>Paste in Amount>>Simulate>>Post.
    It shoud be healpful for you.
    Regards,
    A. Wankhede

  • Can I purchase applecare plus from Apple if the Iphone is purchased from a different source (e.g. Costco)

    Can I purchase applecare plus from Apple if the Iphone is purchased from a separate dealer (e.g. Costco)?

    Yes, as long as you do so within 30 days of buying the iPhone.
    (108846)

  • Excise Problem - 2nd Stage Dealer !!

    Hi,
    Our client buys material directly from factories or from vendors.
    Case1.) when they buy from factory then excise calculation has no problem.
    Case2.) when they buy from 1st stage dealer or 2nd stage dealer then excise calculation has a problem. the dealer increases the price of item after adjusting his profits and passes on the original excise to our client. when making a PO excise gets calculated on the 2nd stage dealer price ... but it shud not happen tht way... it shud be the same as passed on from the factory to the 1st stage dealer and then to 2nd stage dealer. though we have maintained "manual excise" condition in pricing procedure still there is a mismatch during MIRO.
    Any suggestions ???
    TAXINJ Procedure is being followed

    In Migo 105 u can capture&/ Post excise invoice.
    Use manual excise cond. in pricing
    or
    in j1iex use mrp tick
    in Delear case u will have to maintain all the details as per raw material case
    only diffence is in the % of bed ecess and secess put 0 instade of 16 2 and 1
    at the time of po u know that u vendor will give u material at say 100 Rs increse of excise which u dont now and 4 % vat on it
    So u r po will loke like 100 basic
    bed 0
    ecess0
    scess 0
    vat 4
    total 104
    now whe u do GR
    u come to know u have 8 bed 1.6 ecess 0.8 sccess
    at the time of gr in Excise tab value
    put the excise base as 100-8-1.6-0.8 = 89.6
    and in bed 8
    ecess 1.6
    secess0.8
    and in header tab of excise in miscellaneous tab tick MRP indicator
    save ur part one and 2 posted
    then do the miro
    on item line it will show 100 as amount change it to 89.6
    click on calculate tax
    and ur excate payment of rs 104 will be done to vendor
    this the the correct process of Delear case
    Hope this is help full
    Reward if usefull
    Refer
    Reservation deletion after specified period

  • Unable to get help with Broken car compuer module item purchased from seller.

    Hi,
    I am having issue with an item that I purchased march 15.
    The item I purchased was a bmw car light module computer which controls the light.
    On march 20th my machanic installed the part to my car and it over heated so, I contacted the seller on march 20.
    Seller said following:
    "The heating up thing I'm not sure about"......"I wouldn't feel comforatabl taking a return on a module that now might be damaged"
    Asked about operating temperature and seller kept on telling me he/she doesn't know.
    I have went to couple mechanics to get it working as they told me they couldn't program it.
    With refer I was able to find a machanic shop who specialized in programming and had it working after while.
    After having the part programmed it was working fine for couple days and now it random stopped functioning again.
    Going through multiple tests the mechanic told me it's the part that I purchased that's having the issue.
    I contacted the seller again few times regards to this and on June 23th, I asked seller he told me to go see bmw see if they can warranty it.  So I asked for documentation so I can actually make that happen as this product as described is a brand new part from bmw. after few message back and forth now seller says:
    "I don't have any documentation from the dealer purchase. I wish there was something I could do but after the 14 day return period as per ebay, warranties are not obligatory on my behalf. I'm very sorry your having this problem..but other than giving you an invoice from ebay, here I nothing else I can do"
    Telling me now that he has no part no receipt or no way for me to get this part warrantied.....
    On June 24th:
    I have told him that I got the part number from bmw dealer and the part plugged into the car over heated.  How is one supposed to know if part is over heating until it's not working and somone touches it??  This bmw part is the only thing that fits into the slot and there is no way anyone can install it wrong and if size was different it would not fit...  so I think I seller should be more worried about my car being damaged not his broken part that he sold me.
    I been wanting to make this work with this seller yet, he doesn't seem to help me make this work.
    I know the date is way past but with car parts I have to make numerous number of trip to the shop and make appointment,... also he sold brand new part from bmw why can't I get warranty on the part?
    I am making this post because with ebay contact help I wasn't able send them a message.
     

    You purchased on March 15.You received it and it was installed on March 20.The item does not work.So I asked for documentation so I can actually make that happen as this product as described is a brand new part from bmw.Did the mechanic say anything about this part being counterfeit? Most companies will not warranty items sold online, unless the item was purchased from an authorized dealer. Counterfeits are only part of the problem, since some resellers deal in returns, refurbishing, and ( occasionally/ rarely) even stolen stock.  also he sold brand new part from bmw why can't I get warranty on the part?What makes you think he is telling the truth about that? Liars lie. So the seller won't help.BMV won't help.  You are past the 45 day deadline for eBay Buyer Protection.Go to Paypal first, and start a claim for 'Item Not As Described'. PP has a 180 day deadline, but I am not sure that it covers NAD claims.  If that doesn't work, go to the credit card you really paid with (PP is just a useful mediator) phone the 1-800 number on the card and ask the customer service rep about a chargeback.

  • HT1848 I downloaded a book on itunes on one computer and it is not listed on a seconded computer.  Same account.  I have tried updating purchases and transferring recent purchases, transferring purchases from another devices.  Still does not appear.

    I purchased a book on one macbook in my itunes account.  I tried to open it on another account while logging into itunes account.  The book does not appear.
    I have tried updating purchases, the bottom at the bottom-update purchases from another device.  Still does not appear.

    If it's an audiobook then you will need to copy it over from the first computer to the second computer - audiobooks are currently one-time only downloads, so they won't appear under the Purchased link for re-downloading.  If you copied it onto a device from the first computer then you should be able to copy it off that device to the second computer's iTunes via File > Transfer Purchases. If it's not on a device and both computers are on the same wifi network then you should be able to copy it over via home sharing (there are instructions on this page), or you can copy it to, for example, a flash drive (you can find it's location on the first computer by control-clicking it in your iTunes library and selecting 'Show In Finder') and then add it to the second computer's iTunes (File > Add To Library).
    If it's an ibook then you should be able to re-download it from the store : re-downloading.

  • TS1424 I downloaded a song that I purchased from the ITunes store, but the song does not play properly.  How can I re-download the same song without having to purchase it a second time?

    I downloaded a song that I purchased from the ITunes store, but the song does not play properly.  How can I re-download the same song without having to purchase it a second time?

    I could not find an option to "report a problem".
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
    (Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

Maybe you are looking for