Purchasing Group in equipment BOM ( Item level)

At the time of creating equipment BOM , purchasing group in equipment BOM (item level ) will be in sync with material master purchasing data.
When we change purchasing data (Purchasing group) in material master at that time system will not change purchasing group in old equipment BOM's at item level. Is there any standard method to maintain purchasing group in old equipment BOM in sync with purchasing group in material master data (System ECC 6.0 ehp5)
Thanks and Regards,
Pankaj

Thanks for reply Peter ,
Because of this issue wrong information is flowing to PR (when component selected from equipment BOM in work order).
Is there any negative impact if I will remove purchasing group at BOM item level ?
I did analysis for this and found no negative impact on PR , still looking for expert advice as client is not looking for any core modification.
Thanks and Regards,
Pankaj

Similar Messages

  • Bdc code to changing purchase group in the BOM component

    Hi We need to change the purchase grroup in the BOM comoponent level for multi level BOM's. Can we use CSAP_BOM_ITEM_MAINTAIN. any body having sample code for this......
    Thanks in advance.

    Hi,
    Did you check standard SAP transaction Mass change BOM CS20 or CEWB for changing the BOM purchasing group.
    Check and Revert,
    Santosh Sarda

  • How to show purchasing group members in the item data of the shopping cart?

    Dear Experts,
    for s shopping cart in SRM 7.0 CS, i have the following business requirement:
    In the item data tab of the line item details, the drop down field for Purchasing group is there. Right to this field, there is also a link called "Show members".
    If i go on this link, than a small table opens that obviously is there to contain such additional information about the purchasers like name, telephone nummber or extension.
    Currently, this small table does not contain any of this additional information for any of the used purchasing groups.
    Can you please help me understand, how and where i can maintain this information in the sytem, so it shows in the shopping cart?
    Thank you very much for your help.

    Hi,
    thank you very much for the answer.
    Actually, the question is not how to create the organizational unit of purchasing group in the PPOMA. This is all done. I just would like to understand, whether there is somewhere a place where i can maintain the name and maybe also the phone number of the buyer himself.
    Thus, i would hope to see these details (i.e. the name and the phone number) in that small table that opens up if i click on the "Show members" link that is situated right to the purchasing group field in the "Item data" tab of the details of the line item.
    Thank you.

  • I cannot find purchasing group in Shopping cart item basic data in SRM 7.0

    Hi experts,
    We are using SRM 7.0 and stand alone scenario. When we are creating shopping cart, we cannot we cannot find the purchasing group field in item basic data. We have not changed any standard SC layout and I've already specified the responsibility of the purchachsing group.  Now I have no idea why the purchasing group is not visible.
    Can anybody help me on my issue?  Many thanks.
    Harry

    Hi,
       The values are getting populated in the include "LBBP_SC_UI_ITSF49"...
    set orgdata
      READ TABLE gs_sc-org WITH KEY p_guid = gs_scr_basic_i-guid
                           INTO wa_orgdata.
      IF sy-subrc = 0.
        gs_scr_basic_i-proc_group       = wa_orgdata-proc_group_ot.
        gs_scr_basic_i-proc_group+2(12) = wa_orgdata-proc_group_id.
        gs_scr_basic_i-proc_org       = wa_orgdata-proc_org_ot.
        gs_scr_basic_i-proc_org+2(12) = wa_orgdata-proc_org_id .
       read purch. group description
        CLEAR wa_orgdata_i.
        READ TABLE <item>-orgdata
             WITH KEY proc_group-otype = wa_orgdata-proc_group_ot
                      proc_group-objid = wa_orgdata-proc_group_id
             INTO wa_orgdata_i.
        gs_scr_basic_i-proc_group_text = wa_orgdata_i-description.
      ENDIF.
    Here you can make the changes in the Order of the values.
    BR,
    Disha.
    PLs reward points for helpful answers.

  • Price Group at Header and Item level

    Hi All,
    From the documentation, I understand that 'Price Group' field in customer master can be used when I have to group customer according to different pricing types which  I would maintain in VK11. What I am confused about is, if this field is customer specific, why do I have this field at Item level as well in sales transaction? if we want, changing it  only at Sales order header level would not be logical?
    For exe, I have three pricing types which determine the price of any material.  Price Type 1, Price Type 2, Price Type 3
    In VK11, I would maintain conditions like :
    Price Type 1/Customer A/material property 1 : INR 200
    Price Type 1/Customer A/material property 2 : INR 220
    Thanks,
    Binita

    hi binita,
    this is to inform you that:
    1) is there any limit to the maximum number of price list that can be maintained? currently, the client has approax, 1000 such pricing types.
    1.a. no there is no limitation for this price list because it a table with maintaince view as there is not limitations for maintaince views.
    2) Is there any way to make this field mandatory in sales transaction? it is not mandatory to have it in customer master. but as soon as the user selects customer, if no price list is there by default, he should not be allowed to proceed. such setting is possible in standard settings?
    2.a. there are two methods keep the field in item VBKD-PLTYP or header level  VBKD-PLTYP incompletion log - to fill up
           or
    to make the field mandatory you have to open the PROGRAM : SAPMY45A & SCREEN 4900 and make it mandatory at item level.
    balajia
    Edited by: balaji timmampalli achari on Dec 8, 2010 9:17 AM

  • Purchase Order item level change

    Hi All,
    I am trying to edit Purchase Requisition line number at item level in ME22N. But it is in disable mode. Is there any way to change it? The same is editable in delivery schedule tab in same transaction i.e. ME22N . Please let me know how to edit the same at item level?
    Thanks in Advance.
    Regards.
    Sugandh

    Hi Sugandh Ameer Baba,
    This is working exactly the way the ME21N / ME22N transaction is designed!
    When you are in ME22N, if your "item details section" is open , then you cannot modify anything on the "item overview section".
    So, if you need to edit the Purchase Requisition line number at item overview section, COLLAPSE the "item details section "
    Hope I got your issue right !!!

  • Grey out the purchase group fields in SRM 7.0 ?

    Hi Experts,
    We have a requirement where in we need to grey out the purchasing group field in the item section of shopping cart screen . we are using SRM 7.0 portal. So that users cannot change the defualt pruchasing group.
    Is there a way where we can make this invisible without making any changes to the standard code.
    We have checked the below path, we are not getting the correct field for purchasing group in that.
    SRM -> SRM Server -> Cross-Application Basic settings -> Extension and Field Control (Personalization) -> Control Actions -> Display Standard Metadata for Actions on Substructure Level Regards
    Any Help in this regard will be highly appreciated.
    Regards
    Venkatesh P

    Hi ,
    Below are the details :
    General Information About the Application and Component
    Application: /SAPSRM/WDA_L_FPM_GAF
    Web Dynpro Component: /SAPSRM/WDC_DODC_SC_I_BD
    Window Information: IV_L_FPC_CA_DETAILS
    View Information: V_DODC_SC_I_BD
    Configuration ID: /SAPSRM/WDCC_FPM_DODC_SC_I_BD_WI
    Information on Field
    Field ID: PURCHASING_GROUP_DROPDOWN
    Type of UI Element: DROPDOWN_BY_IDX
    UI Element Library: STANDARD
    But this field i dint find in that path.
    Regards
    Venkatesh P

  • Screen BADI for MIRO/FB60 item level field addition

    Hi,
    I need to add 'Material Group" (MATKL) field in item level similar GL Account. Material group will appear like GL account column in FB60/ MIRO screen ( GL posting).
    I want to do without modification with help screen BADI.
    Anyone, can suggest which BADI's method / User Exit can allow to add 'MATKL' field screen?
    regards,
    Rahul Mandale

    Dear Rahul,
    Please check IMG path :
    Material management>Logistic Invoice verification>incoming invoice-->Maintain item list variant.
    Or use Tcode SHD0, enter transaction Code MIRO and create  a screen variant.
    You can create your own screen variant , Untick the invisible check box for material group.
    Regards,
    w1n

  • Do the purchase order can be created with several purchasing groups?

    Hello gúrus,
    I need your help again a.s.a.p. please!
    We are implementing SAP R/3 ECC 600 and we have SRM too.
    In the SRM is possible to create a purchase order with several purchasing groups, but, in MM we cannot because of the purchasing groups is the the header level.
    Somebody expert from SAP told to the client that its possible to create a Purchase order in MM with several purchasing groups..
    Is it possible? or, where I can find information from SAP that said that its not possible?
    Could you help me please?
    Regards,
    Sandra Palomo

    How can I create a PO with different purchasing groups to the same PO?
    Could you give me a detail?
    Regards,
    Sandra Palomo

  • Urgent:Tab and item level access not working

    Hi,I am on portal 9.0.2.0.1 version.I am trying enable security.I have made 5 groups.Added users to group.Those users have only basic view privileges.
    At my page group level I gave view access to all 5 groups.
    At page level gave view access to all 5 groups and checkmarked enable item level security.
    At tab level on one of tabs I gave view access only 4 groups.
    At item level on one of items I gave view access to only 4 groups.
    Now I log in as one of the users in 5 th group and the tab as well as te item both are visible.
    Is it a bug or am I missing somehting.
    Pls let me know urgently

    You asked:
    But if I do not assign any sort of privileges to my groups consisting of all my users then how will they view the page group also forget abt viewing page and tabs on it.
    If you don't assign view privilege on the page group, then you have to assign view privilege on every page that you want your users to see.
    As you discovered, the tabs and items override the page privilege (a tab or item can be hidden from a user who has view privilege on the page), although your users need a minimum of view privilege on the page to see any content.
    I don't understand your comment about groups - they work fine for managing privileges.
    Note that you can use bulk actions (and List View in 9.0.2.6) to manage privileges for multiple pages. You can also assign privileges to your page template to default the privileges on pages based on the template. And new pages will inherit the privileges of their parent if the page group property "Copy Parent Page Properties When Creating Page" is set.
    Regards,
    Jerry
    PortalPM

  • Po number at Item level for Invoice

    Hi,
    My Invoice has 2 Line Items. Each coming from different Sales Order as a result of Collective Delivery.
    I want to Print Purchase order number at the Item level from respective Sales Orders.
    How can I trace it back, which tables would be useful?
    Regards
    Trupti Deulkar

    Thanks for All the Replies.
    I used table VBFA which gave me preceding documents, where I got Sales Orders ( Doc CAtegory C)
    Further from VBAK retrieved the PO numbers BSTNK
    This issue has been resolved.
    Regards
    Trupti Deulkar

  • Screen BADI at Item Level in FB60

    Hi,
    I need to add 'Material Group" (MATKL) field in item level similar GL Account. Material group will appear like GL account column in FB60 screen.
    I want to do without modification  with help screen BADI.
    Anyone, can suggest which BADI's method can allow to add 'MATKL' field screen?
    regards,
    Rahul Mandale

    Martin,
    We have following requirement,
    Material group should be visible for Non PO invocie screen where  MM user can select/input "material group". Once materila group is selected, with user exit GL account filed will be filled based on relationship maintained in custom table.
    Is it possible any way to add "MATKL' field in item level screen without modification?
    Your suggestion is highly appreciated.
    Regards,
    Rahul Mandale

  • Equipment BOM & Function Location BOM

    Dear All,
    We  are created functional location BOM and we are  created Functional location order.In that order i found the  Equipment BOM which are linked with functional location.I assigned functional location BOM as well as Equipment BOM items for that order.It will take the items.In Functional location order Equipment BOM items should not take.
    Pls.Help me.

    Hi Srinu,
    Your query is not clear.
    Normally when your creating the maintenance order for Functional location. if this FL is having the BOM you will get the this BOM during the material planning in that order.
    if your creating the maintenance order for Equipment. if this Equipment is having the BOM you will get the this BOM during the material planning in that order.
    If there is no BOM you can plan the Material from the list also.
    Regards
    Venkat

  • IP Range Item Level Filtering

    Hello,
    We'd like to do some Item Level Targeting with IP ranges to deploy printers but we've determined that this feature is broken on windows 8.  After some investigation we've determined that this is bug that Microsoft is apparently aware of and that it
    was supposed to be fixed June '13, however, we're not able to locate any kind of hotfix and our devices are completely updated.
    Is anyone aware of a fix for this issue out there?
    Thank you!

    Hi Chris,
    Based on your description, I think you have seen the following thread: Windows 8 Group Policy Problem with item level targeting and ip ranges
    http://social.technet.microsoft.com/Forums/en-US/792fd0a7-dbe0-4976-a385-c8ee578140b5/windows-8-group-policy-problem-with-item-level-targeting-and-ip-ranges
    As Martin suggested, the hotfix is still not available. However, in order to help, I will also report this bug. Hope we can get the hotfix in the near future.
    Best regards,
    Frank Shen

  • Equipment BOM classification at Item Level

    Does anyone know if it’s possible to apply classification on an Equipment BOM or FL BOM at the item level, Other than Batch classification -023?

    Go to SPRO
    Cross-Application Components -> Classification System -> Classes -> Maintain Object Types and Class Types (Click IMG Activity Documentation)
    Scroll down to <b>Defining new classifiable object types</b>.  It provides detailed explanation of how to create new classifiable object types.

Maybe you are looking for