Purchasing Groups values not populated in PR default settings - ME51N ??

Hi,
We have SAP R/3 MM ECC 6.0.
I want to set Purchasing Group as one of the default parameters in ME51N (Purchasing Requisition) screen.
The problem is I have selected 'Purchasing Group' as a default parameter in 'Default Values'/ 'Personal Settings' but,
the Drop-down help does not show up any values for Purchasing Group to be selected as default.
However, I can set-up 'Account assignment' & 'Item Category' as defaults and, I can choose their default values.
Therefore, in result, I do not have any Purchasing Group set as default for my PRs.
Is there a configuration setting required to populate the drop-down box of Default Settings (for purchasing group)
with Purchasing Group values? Please advise.
Could this be a bug?
Thanks,
Ruchika

Hi Karthik,
I have already done these steps.
The problem is - Purch. Group field is there in Default settings but, it doesn't show me any values to select from and
set a Default value.
None of the purchasing groups available in system are appearing here. The selection list is Blank.
Is there anything I need to do to bring the P.Group values in the drop-down selection list of Personal settings?
Thanks,
Ruchika

Similar Messages

FIXED type Attribute value not equal to the default

Hi
I am in the processing of doing AP Inbound process. During My process I have created Invoice XML and XSD and mapped with XML Gateway OAG XSD.
BPEL able to pool the directory and process the XML file. But I am getting below error at XML Gateway error log.
FIXED type Attribute value not equal to the default
value ''.
Could any body let me know when do I get normally this kind of error.
Regards
Kiran Akkiraju

If you have imported the source code you could use a workaroud i have found. Create a new workspace and a new Project. In it create with the wizard a new Struts Controller Page Flow. After, create a action class, and some jsp pages.Then put some Struts components with the Components Palette.Be sure that in the newly created pages, jdeveloper has put the struts taglib. Now you can rebuild your project.
It seems that jdeveloper does some internal libraries configuration, but when you import the source code, it doesn't do it.
Hope it helps
Nicolas Fonnegra M.

The correct purchasing group is not being determined in the SC line item

Dear all,
I have a problem in that for some reason, when a shopping text line item is added to the shopping cart, the wrong purchasing group is determined. Further more when you look in the basic data section they is a drop down against the purchasing group field listing all pruchasing groups setup in the org plan via PPOMA_BBP.
This means that the requisitioner can change the purchasing group to any one even the one that is not relevant to his or her Purchasing Organisation. This of cause is not right because if the requisitioner is allowed to change the P/Grp, the wrong buyer may end up recieving the buyer completion work item.
What is causing this?
We have uniquely assigned P/Orgs to P/Grps and assigned resposiibility of P/GRPS to one unique ORg unit (company).
for example, a suppose product Category 1234567 is assigned to P/GRP 100 & P/GRP 100 is assigned to P/ORG 1000 and the P/GRP responsibility is set to Org unit(company) 1000, The requisition "sits" under an orgunit linked to company 1000.
If a requisitioner creates a text item and assigns product category 1234567, when the item is added to the shopping cart , I expect to see that the followig:
1. The Company code(CC)should be 1000 (This is happening)
2. The P/org should be 1000(This is happending)
3. The Plant sssignment is correct
4. The p/grp is worong. It appear that the first P/Grp is assigned plus a drop down listing all p/grps created for all purchasing P/Orgs.
Regards,
Grace

Yann,
Yes , we have (need to have)set 2 purchasing groups with the responsibility of the same product category. We have to do this because in our organisation, individual company purchasing organisations have same responsibilities to purchase similar products.
Please note that we have a classic scenario implementation. SRM 4, Server 5.
The business requirement and settings in the org plan is for example:
P/Grp 100 has the reponsibility to procure Prod cats LAM001 to LAM010 via its assigned P/org 1000 which is linked to own company 1000 and P/grp 200 also has the reponsibility to procure Prod cats LAM001 to LAM010 via its assigned P/org 2000 which is linked to own company 2000.
Please note that thr buyer responsible for p/grp 100 & 200 are the same and will be the same for similar product cats across the organisation as a whole. Its just the SRM does not allow you in the orgplan to assign the same p/grp to multiple p/orgs, we had to double up on the p/grps.
Also when a requisitioner who sits under company 2000 chooses a product cat 12345 if creating a SC text line, we DO NOT WANT the requisitioner to change the assigned p/grp.We want it defaulted to 200 (based on the org plan setting I have described above) and fixed(greyedout)
when thr line item viewed in the basic data section.
Do you think that because we have set the prod cat range LAM001 to LAM010, which is an alphanumeric product cat range, that could also be the reason for the dropdown listing all orplan p/grps even ones that do not have the product cat LAM001 to LAM010 in its responsubility assignments?
If you are saying that the system does not know which p/grp to pick, why its it displaying all "unrelated" p/rps in the dropdown. I atlest expect to see two p/grps in the dropdown 100 & 200, because only these two p/grps have been set with product cat responsibility for LAM001 to LAM010 in our org plan.
Also if you are saying that is the way SRM was designed to work (which may be the case!!!) how then can we set the org plan to meet our the purchasing org/purchasing grp /prod cat responsibility requirements I have described above?
Regards,
Grace

Batch characteristic value not populated!

Hello guys,
please would appreciate advice to following:
I created two reference chars z_goods_receipt (MCH1-LWEDT) and z_created_on (MCH1-ERSDA). Chars assigned to material batch class. During GR in Classification Dates (chars values) are visible, but after GR is saved, in batch chars values are not populated.
Consequently, I can not use these chars in sorting criterium for delivery batch determination - batches are not sorted acocrding to dates.
Batches on material level. In Customizing (Classify batches within goods mvt), for mvt 101 setting is 4 (Classification always in foreground (all batches)) - but bug remains even if i try with other options. Check with developer shows not much help from EXIT_SAPMM07M_004 or EXIT_SAPMM07M_004 or EXIT_SAPLV01Z_012.
Any idea how to populate these chars in batch?
Alternatively, what else I could use in order to enable FIFO batch determination for batches in delivery?
Thanks for prompt replies!
Br, Jan

Hello,
SAP reply -standard behaviour. After save in MSC2n values read from MCH1, after that in MSC3N value read from AUSP.
Issue solved using non reference charactereristic and adding code into ZXMBCU04.
Br, Jan

Virtual Characteristic value not populating in the query output

Hi Experts,
I am new to BAPI and I am using this to populate the values of virtual characteristics.
I wrote the below code to populate if an order status got some status value then i need to populate the flag y if not n.
I got the order value in the reprot. I need to go to order master data and should get the status and then i have to do the comparision and populate the flag zww_teco in the report.
The below is the compute method of my implementation class.
FIELD-SYMBOLS :
<fs_0cs_order> TYPE ANY,
<fs_zww_teco> TYPE ANY,
<fs_status> TYPE ANY.
if p_cha_0cs_order > 0.
ASSIGN COMPONENT p_cha_0cs_order OF STRUCTURE C_S_DATA to <fs_0cs_order>.
endif.
if p_cha_zww_teco > 0.
ASSIGN COMPONENT p_cha_zww_teco OF STRUCTURE C_S_DATA to <fs_zww_teco>.
endif.
Select single /BIC/ZSYSTATUS
    from /BI0/PCS_ORDER into <fs_status>
   where CS_ORDER = <fs_cs_order>.
if <fs_status> CP 'TECO'.
<fs_zww_teco> = 'Y'.
else.
    <fs_zww_teco> = 'N'.
endif.
But I am not sure why the values are not populated. But when i debug , i could see the values for
P_cha_0cs_order = 35
p_cha_zww_teco = 54
But i could get the values of <fs_0cs_order>, <fs_zww_teco> after assign component statement.
And it is firing me a dump in select statement. Also when I click c_s_data i am getting S____274, S____505 fields like that in the structure but i could see p_cha_0cs_order
Can you please guide where i am missing ...
Thanks
Vamsi
Edited by: vamsi talluri on Nov 9, 2011 6:14 PM

Hi Sushant,
RSRT --> Enter Query Name
Click on Technical Information --> If " Virtual Char./Key Figures " = Y
In my case , even then i clciked generate report,
even after that P_CHA_0CS_ORDER = 35
and after assign component P_CHA_0CS_ORDER of structure c_s_data to <FS_0CS_ORDER>.
the <FS_0CS_ORDER> is nothing , here i should get the value of cs_order value of that record but it is coming empty which i am not able to rectify. How should i change or i need to put any other setting to get the value populated into my <FS_0CS_ORDER>.
Can you please guide me .
Thanks
Vamsi

Value not populating in the print out (sales order) for the 1st time

Hi friends,
While saving a sales order, the order confirmation going to the user is not populating the LDC field. LDC is Last date of change. This field can be found in the Additonal data 2 tab of the material in the sales order. When I enter a date in this field and save, the print preview of the output has this value, but the print out does not carry this value.
Another weird thing about this issue is that, the second time i trigger the output, the print out has the value.
Please give me some clue on where to check and how to go about fixing this problem.
Regards,
Shanu.

Dear Shanu,
This issue may be related bug in the output program so take help of ABAPer to fix the issue.
I hope this will help you,
Regards,
Murali.

Values not populated in S_ALR_87012806 for a specific cost element

Hi all,
Postings made to specific cost element are not populated in report S_ALR_ 87012806. Can anyone throw some light on this?
Thanks
Shravan

Hi Krishna
I dont think "Cost Accounting > LIne Item" would work for Master Data
You can use exit COOPA_01 (SMOD) > Include ZXAUFU08 (Part of EXIT_SAPLKOAU_002)... I have used this for similar purposes in the past
Regards
Ajay M
Edited by: Ajay Maheshwari on Nov 12, 2010 12:45 PM

Purchased ringtone does not appear in list in settings/sounds/ringtones

Hi I bought a ringtone on my iphone today and I can see it in the purchased downloads, and I can see on my MacBook after sync, but it does not appear in the list of ringtones on my iPhone, so I can't set it as my default. Can anyone tell me how I find this purchased ringtone and set it as my default ring?

I pressed the itunes icon on my iphone, up came the title screen, and one of the offerings on it was "Ringtones RCP Ringtones 1.0" you either buy the full library of the tones for $3.99 or just one for .99, which is what I did, I found the one I wanted (it sounds like a British telephone with that double ring-ring) and hit the buy button. It asked for my iTunes password which I gave, and then it downloaded. In other words, exactly like any other itunes song does.
Now it's sitting on my iphone in the downloads file. When I couldn't get it to appear in the settings/sounds/ringtones section so I could choose it, I thought maybe I should do a sync with my itunes on my computer, so I did that, making sure that "sync ringtones" was checked. Now there is a new file on my computer itunes called "Purchased on [my name]'s iPhone" however there is nothing in the ringtones folder on the computer itunes, and I've tried dragging it out of that purchased folder into the library and into the ringtones folder and it won't go in.
I can play it on my phone, and I can play it on my computer. it appears like any other song on itunes. but I can't make it become the ringtone on my phone!

Custom options in Adobe PDF printer are not showing up in "Default Settings"

Hello,
I am using Windows 7 and I am trying to create custom "Default Settings" in my Adobe PDF printer. When I make edits to an existing setting, click "Save As..." and save with a new filename, the new settings are not showing up in the "Default Settings" drop down box in the "Adobe PDF Settings" tab of the "Adobe PDF Document Properties" dialogue box. I can confirm that the new settings are indeed saved on my hard drive and are located in:
C:\Users\[Username]\AppData\Roaming\Adobe\Adobe PDF\Settings
No matter how many different custom settings I save as described above, they are simply now showing up. This works for me on other computers, but just happens not to work on my current one, which recently had an OS reinstall from scratch. Prior to the reinstall, it worked just fine on my computer (an ASUS UX31A laptop). The included pictures demonstrate what I'm talking about.
Any thoughts?

I finally solved this. The path for the Adobe PDF Settings was set to the follwing in the registry (HKEY_CURRENT_USER\Software\Adobe\PDF Settings):
C:\Users\%USERNAME%\AppData\Roaming\Adobe\Adobe PDF\Settings\
Even though "%USERNAME%" should work, it doesn't. I just replaced it with my actual username and it worked.

Values not populated in AET STATE RECORD

Hi all,
I have a state record with the fields
PROCESS_INSTANCE
RUN_CNTL_ID
OPRID
COUNTER
ACCOUNTING_DT
FZAM_COUNTER
FROM_DT1
TO_DT1
SOURCE
I am fetching values into the above state record from z tables in my app engine.
Step :step 02 Action :SQL
%SelectInit(ACCOUNTING_DT,COUNTER)
SELECT ACCOUNTING_DT
, COUNT(*)
FROM PS_FZAM_VND_GL_STG
WHERE GL_DISTRIB_STATUS = 'N'
GROUP BY ACCOUNTING_DT
Step :step 03 Action :SQL
%SelectInit(FROM_DT1,TO_DT1)
SELECT FROM_DT1
, TO_DT1
FROM PS_FZGL_RUN_DT_HDR
WHERE SOURCE = 'AM'
But i find FZAM_VEND_AET.COUNTER , FZAM_VEND_AET.TO_DT1, FZAM_VEND_AET.FROM_DT1 all empty eventhough PS_FZAM_VND_GL_STG & PS_FZGL_RUN_DT_HDR has values in them.
additional infor :AET record is FZAM_VEND_AET which is a sql table and process_instance is the only key.
Kindly share ur views

The log entry you are showing here does not come from your Requester ABCS, rather from the AIA Error Handling code itself not being
able to find the mentioned property EH.DEFAULT.FYI.ROLE in the AIAConfigurationProperties.xml.
I guess you want to verify if your version of AIAConfigurationProperties.xml in MDS (not on the file system) has this property set or not. Per default, it should be.
From what you posted here, there is no evidence that the EH code in your generated ABCS does not work properly.
Gerhard

Value not populated for new field - in RSA7 for PI interface in BW

Hello Experts -
We have 3.5 bw and PI 7.x. we have a PI interface in bw working in production and now we enhanced the interface with a new added field. I mapped the new field in transfer rule/ modified update rules/ods and regenerated the soap datasource in bw. The user has uploaded the file in FTP with this new field added. PI picked the file processed and the value for new field got populated and pushed the data to BW. In RSA7, i dont see the data filled in for this new added field.
Not sure, if i missed any steps, in BW, so that I can populate the value for this field.
Thanks for any inputs/comments.

Hi ,
Replicate the Data source in BI and activate it using RS_DATASOURCE_ACTIVATE_ALL program.
Regards,
Ramnaresh.P.
Edited by: ramnaresh porana on Apr 26, 2011 9:43 PM

Badi-Virtual keyfigure value not populating in query

HI all,
I am trying to populate a constant value into the virtual keyfigure when the query is executed but the value is not getting populated.
I followed the steps how to do this by looking into the step by step process for keyfigure article which i found in SDN.
When i execute my BADi in se19 i am able to get the value but not in the query.
Is there a special way to create keyfigures or is it the same way as we create a normal keyfigure.
Can someone tell me how to get the values in query.
Thanks in advance.
Regards,
Harish

Hi,
why dont you debug the badi while executing the report from RSRT t-code. This will give you some idea.
To debug, put a break point in 'define' as well as 'compute' function of your Badi-implementation, then go to RSRT t-code, enter your query name and then click generate. It will stop at the break-point. Here you can see what is the problem
Regards
akshay

Exclusion group values not exporting to "Merge Data" spreadsheet

Hi everyone,
I've noticed that most of my radio button values do not show up on the spreadsheet (yet some inexplicably do). Has anyone else ran into this problem?

Many thanks for this workaround. I have been searching for a solution for 18 months!! It would be good for Adobe to fix this glitch in the Acrobat X program.
I have also gone one step further and named the exclusion group with codes to identify what the values refer to. (eg. The name of one exclusion group with three options is SSPtype-edbd1-intell2-hosp5) This wouldn't be practical for long lists of options but it helps when it comes time to interpreting the exported data.
I wonder if there are any other field types that have weird problems like this one????
Once again, many thanks for your assistance!!!
jeannie

LIST OF VALUES not Populating in BPS WEB INTERFACE ( LAYOUTS )

Hi BI Guru's
I have created a WEB interface for BPS in BI ( version 7.0) . But when i execute this in internet explorer, I do not get the LIST OF VALUES for Material.
When I click on "input help" the system open a new window for "Value selection". When I specify the material code, it gives me blank LIST OF VALUES.
But it is working for other fields like Customer, UOM in the same layout.
Please suggest some solution.
Thanks,
Nilesh Labde

hi,
Thanks for the reply.
Master data is avaliable for the Material Code. The problem is in Internet Explorer and not in SAP GUI .
If i run Planning folder for the same layou in SAP GUI it is working fine.

Values not populating in list box in dialog programing.

hi,
i am facing a problem i.e. i am having a listbox on screen , in pbo i am filling that listbox with some values in an internal table.
But i am not able to populate the values i.e. while i am debugging the pai ......the list box is containing nothing.
So needed some help in this issue.
regards,
somesh

Hi,
Try to read these links. It will give you some pointers regarding on your problem.
<link-farm removed>
Revert if you have still any concern.
Thanks,
iostreamax
Edited by: Suhas Saha on Feb 21, 2012 8:50 AM

Purchasing Groups values not populated in PR default settings - ME51N ??

Similar Messages

Maybe you are looking for