Purchasing Outline Agreement Contracts - Condition values

Experts,
My requirement is to get historical condition values from contracts ME33k. I am able to get PB00 condition value from A016, KONH and KONP. Like PB00, there are other conditions defined in contract (example: Frieght, Discount etc). From which tables I can getct the data for those conditions?
Thank you,
Nagarajan

Hi, have you checked old threads for this issue? it seems there are few with "resolved answer" marked...have a look at the bleow thread and try using KONV table also
PO item Condition Record number and delivery address of PO - Need a table n
Yogesh
Edited by: Yogesh Lohiya on Jan 4, 2012 11:46 PM

Similar Messages

SPRO config field for Material Master & Outline agreement Contracts

Dear Gurus,
I want the Field AUTO PO should be mandatory field - for creating New materials - Can you please suggest me in SPRO configuration?
For outline Agreement ( contracts) - i want to make the Plant field as mandatiry - Can you please suggest me in SPRO configuration?
Please advice
Regards
RS

Hi,
Transaction MEKB is for maintaining Condition records, in you PRD server ask concerned to maintain condition record using MEKB for contract and its line item.
Procedure is
1. Input in the intial screen is Purchase org, Contract number and relevant line item number and execute
2. In the following screen highlight the line item and click on create (F6) button in the tool bar (First one from left)
3. In the following screen inside grid maintain price in amount column agains the condition type
If you have done the above steps then AUTO should work
Check on it as eill:-
Re: pr mandatory for po
Re: Auto PO in ME59N
pherasath

Outline Agreement (Contract) data does not match with EKPO table.

Hi,
I have created a outline agreement(Contract) with net price as 100 / 1 Kg. But when I go to EKPO table in front of Net Price it is reflecting net price as 1 / 1 Kg. So it shows that it is dividing the net price by 100 in Table EKPO. This is happening with the currencies which are maintained in T Code OY04 (Currencies like JPY, CLP, ESP, ITL) with decimals as 0.
Rest all curriencies which have not maintained in OY04, there is no problem in EKPO as the data matches with Outline Agreement Net Price.
Request you to please provide the input to resolve the same.
Thanks & Regards,
Neeraj Singh

Hi Neeraj Singh,
The value of data stored in EKPO depends on the decimal places defined
for the currency. In standard the decimal places is taken as 2 . Therefore the value will be
the same as order price if the currency is defined for two decimal
places ( default is 2 ).
However, if the decimal places for JPY is defined as zero the table
will show a value of price /100. If you choose a currency with
3 decimal places the value in the table will be price * 10 and so on.
Example:
Currency                          Decimal places      Order price      Value in EKPO
SGD                                               2               2000               2000
NLG                                               2               2000               2000
JPY                                               0               2000               20
KWD (Kuwati Dinar)                     3               2000               20000
ITL                                                 0               2000               20
All currencies that do not have any decimal places at all
(TCURX-CURRDEC = 0) must have EKPO-NETPR multiplied by 100.
Please check SAP notes which may be of help to understand this issue 53206 and 137626
The issue you reported in not an error but standard. I hope this information is of help.
Regards,
Lorraine
Edited by: Lorraine Donnelly on Jul 12, 2010 6:57 PM

Global Outline Agreement (Contract Create in Backend System)

Hi All
We are trying to create contract in backend system automatically. We have implemented the following two BADI.
BBP_DETERMINE_LOGSYS (SRM 5.0)
BBP_CTR_BE_CREATE (SRM 5.0)
But they are not getting triggered, when the contract is created. Just for the sake of confirming this, We put some logic for inserting an entry in the custom table if at the BADI is trigerred. But after the creation of contract there is no entry found in the custome table, hence I believe that the BADI is not getting trigerred.
My requirement are
1) I want this BBP_CTR_BE_CREATE to be triggerred when I click the "Release" button in "Global Outline Agreement".
2) Pointers how this can be debugged when releasing the outline agreement
Any help to solve this/ some useful pointer would be highly appreciated.
Note: I have checked these but did not help much,
https://forums.sdn.sap.com/click.jspa?searchID=1066187&messageID=1694393
https://forums.sdn.sap.com/click.jspa?searchID=1066187&messageID=1162212
Regards
Kathirvel

Hi Bala,
Please see the note
Note 646903 - Global outline agreement: Tips and tricks.
This contains details of debugging the GOA transfer BADI.
Actually you need to make a variable X while starting debugging and then only BADI get trigerred.
This will solve your issue as debugging seems to be only way for your issue.
regards,nishant
please award points if it helps

Outline agreements(contracts) - consignment

Hello Experts!
I have following problem and need your help. I have run the report ME80RN (General Analysis of Purchasing documents) for quantity contracts. We have normal and consignment contracts.
Is there any chance that the report shows the values for the consignment contracts as well? Atm the reports shows just 0`s. I know that the prices are in the info records but we would like to know what the expected spend will be.
Thanks for your help.

Excactly. I get the Net Order Values for normal contracts. For consignment contracts there is only a 0.00 in the Net Order Value column for each contract position.
Thanks in advance.

How to find closed contracts/outline agreements

Dear Experts,
What criteria is used to determine if an outline agreement / contracts is closed or open?
Early reply on this much appriciated.
Thanks in advance.
cheers
Good guy

You must get from the below tcodes
ME3L, ME3N, ME3M

Contracts and Outline agreements

Dear experts
What are the tables to look for if an outline agreement / contracts is closed or open?
Early reply on this much appriciated.
Thanks in advance
Cheers
Goodguy

Hi,
check in tables EKKO, EKPO, EORD.
Regards,
Vinod

Outline Agreements - min order qty and regular vendor flag

As a part of E Source Integration with ECC we are planning to leverageusing Outline Agreement(Contract Type MK) to store
Price and other Business Terms for Material / Vendor combinations. Currently we are
using Purchase Information Record with minimum order quantity and
regular vendor flag functionalities, and these are maintained manually.
We intend to use Minimum Order qty and Regular Vendor Flag
indicator in Outline Agreement as well, however noticed that these fields are
not available in the screens. Does anyone know if these fields can be enabled in an outline agreement?

Guys
thanks for reply..
But I thnik my question was not fully clear as the aswers didn't make sense to me...
As a logistics consultant .I know that I can maintain Min Order qty for a material + vendor at PIR level..
My question ..if I buy 10 items in a PO from a sinle vendor..is there any option to restrict Min qrder qty for these combination of materials..
or in other words vendor says he dont care about number of items ,but the lot lot should be min..10 cartons only..
appropriate points will be rewarded.
thanks in advance.

Purchase Orders against Contracts/Sales Orders report

One of our divisions creates long term Contracts against which there are potentially hundreds of Purchase Orders created as the work continues. I have seen reports of POs for material group (ME2C), vendor (ME2L) and more but is there one that will list POs for a Contract or Sales Order.
Apologies if I'm missing something obvious but I must admit I cannot seem to see it if it does exist.
Many thanks in advance
Jim

1. Logistics  Materials Management  Purchasing  Outline Agreement  Reporting  General Analysis
ME80RN
2. enter certain selection criteria and choose Execute
3.To see details for the contract which you created and issued a purchase order against in previous steps, select the contract and choose Purchasing Document (F2).
4.On the Display Contract: Item Overview screen, select a line item and choose Release Documentation (CTRLSHIFTF12).
5.On the Release Order Docu. for Contract 46XXXXXXXX Item XXXX screen, to view details for a single PO that has been issued against the contract, select the purchase order then choose Display Document (F2).，choose Back
6.On the Release Order Docu. for Contract 46XXXXXXXX Item XXXX screen, To view the Release details for a single PO, select the purchase order then choose Release (SHIFT+F4).

Outline Agreement archived before the corresponding purchase order was closed

Hi All,
I would like to know that whether an outline agreement can be archived before all the purchase orders corresponding to it are closed?
We have some open POs and the contract corresponding to that has been already archived. Please suggest,
Thanks,
Ankit

Hi Jurgen,
Thanks for the reply. I see the following for the contracts:
Contracts
The following criteria are checked if Customizing for Purchasing has been set up accordingly:
The target value has been reached (within the tolerance limits)
The target quantity has been reached (within the tolerance limits)
The validity end date has been reached
They are no longer in use.
What does it mean that 'They are no longer in use'? Does it mean that no purchase order should be open for that particular contract?
Also, in my case the POs that are open, we are not able to delete them as while making changes it tries to open the outline agreement but does not find one as it is already archived.
Thanks and Regards,
Ankit Goel
Message was edited by: Ankit Goel

Tax value on Outline Agreement

I am very new to the concept of purchasing and outline agreements and below are some questions. Please help.
Should there be a tax value on outline agreements trxncode me32K?
Are they attached to purchase orders? and if so, how do you find out the PO attached to the contract(outline agreement).
Advance Thanks to those who can help and I will reward points.
Ladysap

Hi
1.For Outline agreement, Tax code is not mandatory. However, you can enter the same by selecting the line item and clicking "Item Details" (F2).
2. Yes, Contracts(Outline agreements) are attached to Purchase Orders. They are called Release Orders. To create a PO against a Contract, go to ME33K, give the Contrcat no and in the Menu go to Contract->Follow On functions->Release Order.
You can view the Pos attached to the Contract in ME33K. Select the item in the item overview and then choose Item -> Statistics -> Release documentation.
For further information on the release order (i.e. on the purchase order), choose Goto -> Release details.
If you wish the goods receipts and values of invoices received to be displayed for the item, choose Goto -> PO history. All GR and invoice documents are then listed.
For more information on Outline Agreements, pls visit http://help.sap.com/saphelp_erp2005vp/helpdata/en/75/ee0f5a55c811d189900000e8322d00/frameset.htm
Hope this clarifies.
Thanks

Few condition types missing in Outline agreements

Hi,
In PO, I am getting all conditions but in outline agreements (either contract or sch.agreement) few are missing. How to get all conditions in Outline agreements?
Regards,
Sattuj

dear sattuj
check inforecord tab , wether it is getting field or free , if it is rffering any inforecord than make sure that info record have all the condition type ....
reward points if helpfu
thanks and regards
ravikant dewangan

Global outline agreements and contracts

Hi,
Can anybody give me a step by step explanation of how to configure and distribute contracts and global outline agreements to the backend system. Also the T-codes used to access the contracts in the backend once the contracts have been distributed.
Happy New Year 2006 to the community !!!
Regards
Sunny

Hi Sunil,
I am not sure how are you creating your GOA in SRM. SRM Sourcing Business Config guide has lot of info on this. Here is some in brief.
GOA can be created manually or from Sourcing itself or from Sourcing involves Bidding or Auction.
I assume You are creating manually GOA in SRM.
1. You have to decide what type of Ctr you want to distribute. You can distribute as Qty Ctr or Value Ctr or Scheduling Agreement.
2. Define Doc type for each of these in Define Transaction type in SRM and assign Int number range.
3. Define same in R/3 and create same number range as Ext and assign type.
4. You have to code R/3 BADI BBP_CTR to determine next number for CTR distributed from SRM using new number range object.
5. You need to partner profile in R/3 to receive IDoc from SRM.
6. Distribute GOA from SRM using Distribute function.
7. You can see the CTRs in ME33K amd ME33L in R/3.
Ctrs are distributed thru IDoc using qRFC. You can use IDoc standard tools to troublshoot any issues during IDoc posting.
There are tools to monitor qRFC issues. Use SMQ1 in SRM to analyse the probelm.
Thanks,
Jay

FM for MM Contracts (outline agreements)

Hi everybody !
I need your precious help...
I have to change regulary the price conditions (PB00) for some items in contracts, and I wanted to know if there was a function module or a bapi that could do that, and, is there an FM or a BAPI that could add some items in (known) contracts ?
Thanks a lot,
E.Briot.

Hi,
Use BAPI BAPI_CONTRACT_CREATE
Check this thread for sample code
How to implement create outline agreement ( ME31K) in ABAP
Regards,
Satish

Difference - Outline Agreement , Scheduling Agrrement , Contract

Hi all...
Can anyone of you please explain whats the main difference between Outline Agreement , Scheduling Agrrement and Contract and when & where are these used.
Thanks
Balaji

Hi
Contracts and SA...both are called as Outline Agreements...
the main Diff.bet Contracts and SA..
1)The Conditions maintained in Contracts are always Time Dependent....where as you can maintain floating conditions in SA.(Controled by Doc.Type)
2)Based on contract you cannot do GR Directly....ie)you have to separately send Release Order by referring Contracts and based on these release orders only you can do GR....
whereas in SA, after releasing SA...you can do GR based on these SA...
3)The Individual delivery lines of the Release orders of the Contracts will not be effective.....where as Individual Delivery lines of the SA are Effective...
Reward if useful
Regards
S.Baskaran

Purchasing Outline Agreement Contracts - Condition values

Similar Messages

Maybe you are looking for