Pure-ftpd no longer works after recent package released (1.0.21-1)

When I try to do pure-ftpd start I get the following message:
421 Unable to switch capabilities : Operation not permitted
Anybody have an idea? Thanks.

Thanks byte - that was it. That module was not required in the previous release of pure-ftpd. In fact, I've never heard of it before.

Similar Messages

  • [SOLVED] pure-ftpd no longer works after system update

    Hi,
    I made a system update today and since pure-ftpd doesn't want to start it just display "[FAIL]" but I don't have any error message.
    Is it possible to see the the error log of pure-ftpd ?
    Do you have any idea of how getting it working again?
    Thanks
    Last edited by clems45 (2011-04-02 21:41:23)

    I tried to check the version of pure-ftpd: pure-ftpd -V and it replies:
    pure-ftpd: error while loading shared libraries: libmysqlclient.so.16: cannot open shared object file: No such file or directory
    but mysql client is installed properly! I tried to reinstall it but it changed nothing

  • Printing No Longer Working After Recent Upgrade

    My printing suddenly stopped working after the latest upgrade (which upgraded the kernel from 2.6.15.2 to 2.6.15.4). 
    I discovered that arch is no longer auto-loading the parport_pc module.  This is strange.  If I run "hwdetect --show-modules", parport_pc is shown. 
    I do have MOD_AUTOLOAD="yes" in my rc.conf file.
    The quick fix is to add "parport_pc" to the list of MODULES in rc.conf.
    Are others having this problem?
    Rob

    I just read your post.  I am sorry I could not join irc.  I was actually at work.  It is very hard for me to use irc at work.  Firewalls make life difficult!
    In any event, I think I solved the problem. 
    Please see http://bbs.archlinux.org/viewtopic.php?t=18747
    Here is the complete post:
    In my /etc/modprobe.conf file, there was the folloiwng line:
    # Load lp support with parport_pc
    install parport_pc modprobe -i parport_pc ; modprobe lp ; true
    I believe that this line was in the original /etc/modprobe.conf file that came with arch 0.7. I don't remember ever adding it.
    I commented out this line and I removed "parport_pc" from the list of MODULES to be loaded in /etc/rc.conf.
    I rebooted and it worked. The modules lp, parport and parport_pc were all autoloaded at boot-up.
    I should also note that right after the arch upgrade, I was experiencing CUPS daemon failure once and awhile at boot up. Somtimes cupsd loaded and sometimes it failed at boot up. Now it seems that cupsd loads reliably at every bootup. Problem solved!
    The following are the remaining lines in my /etc/modprobe.conf:
    # Load ppp-generic with modem drivers
    install Intel536 modprobe -i Intel536 ; modprobe ppp-generic ; true
    install Intel537 modprobe -i Intel537 ; modprobe ppp-generic ; true
    install ltmodem modprobe -i ltmodem ; modprobe ppp-generic ; true
    install ltserial modprobe -i ltserial ; modprobe ppp-generic ; true
    install slamr modprobe -i slamr ; modprobe ppp-generic ; true
    install slusb modprobe -i slusb ; modprobe ppp-generic ; true
    # OSS Compatibility
    #install snd-pcm modprobe -i snd-pcm ; modprobe snd-pcm-oss ; true
    #install snd-seq modprobe -i snd-seq ; modprobe snd-seq-oss ; true
    # --- BEGIN: Generated by ALSACONF, do not edit. ---
    # --- ALSACONF version 1.0.10 ---
    alias snd-card-0 snd-opl3sa2
    alias sound-slot-0 snd-opl3sa2
    options snd-opl3sa2 fm_port=-1 midi_port=-1 port=0x538 wss_port=0x530
    options isapnp=0 dma1=1 dma2=0 irq=5
    # --- END: Generated by ALSACONF, do not edit. ---
    The modem driver lines came with the original /etc/modprobe.conf file in arch 0.7.
    Should I also comment them all out?
    Perhaps I should only have the lines for my old ISA sound card in the /etc/modprobe.conf file. Please let me know.
    Has there been a change in the kernel or udev which makes it neccesary to make all these changes in the /etc/modprobe.conf file?
    Rob

  • SCIM no longer works after last package update

    I just did the usual
    sudo pacman -Syu
    and now SCIM Pinyin chinese input no longer works:
    When I press the hot key to enable chinese input, it only shows "English/European" in the notification bar that pops up, and I cannot enter chinese characters. Also after activating the hotkey, the backspace key suddenly no longer works anymore, until I disable SCIM again by pressing the hot key once more.

    Thank you, actually it worked again after a reboot. (No idea why.)
    I reboot this PC very very rarely, it's not supposed to be rebooted.
    Last edited by mir91 (2014-07-10 02:00:07)

  • Autofill no longer works after recent Firefox update

    The Auto-fill function on google toolbar no longer works ever since I updated to newest Firefox

    See this for support information about the Google Toolbar.
    [http://www.google.com/support/toolbar/?hl=en]
    Or visit the Google Toolbar forum.
    [http://www.google.com/support/forum/p/Toolbar?hl=en]

  • Middle mouse click no longer works after recent update

    I noticed after updating about 3 days ago that clicking the scroll wheel no longer acts as middle click on my MX Revolution mouse from logitech anymore. Pressing on the scroll wheel use to act as middle mouse click, now it just switches between scroll modes. I would like to have the former functionality returned as I really like to be able to open links in new tabs and paste with just one click.
    Does anyone know how I could get this functionality working again on this mouse? All other button functions work as they did prior to the update that changed my scroll wheel click behavior.
    Thanks for any help with this matter and please let me know if any other information is needed to diagnosis this problem.
    Last edited by daedalusman (2009-07-26 05:06:48)

    djszapi wrote:
    Does this mouse work with other OS/PC ?
    After a simple reboot or pacman -Syu, do you backup to roll back ? Can you mention which packages/files were updated?
    Yes the mouse works in windows, but logitech provides a configuration utility for it and so I use that set it up. In linux there is no such utility to configure the mouse. There use to be btnx and that worked great but it's no longer in the repos or AUR so I don't use that anymore. I haven't done pacman -Sc or pacman -Scc in a while so I should still have the packages to roll back, but I'm not sure what package update caused this. Here is a list of the of packages that were updated just before this started happening, from pacman.log...
    [2009-07-22 11:20] synchronizing package lists
    [2009-07-22 11:20] starting full system upgrade
    [2009-07-22 11:21] starting full system upgrade
    [2009-07-22 11:23] upgraded python (2.6.2-4 -> 2.6.2-5)
    [2009-07-22 11:23] upgraded brltty (4.0-2 -> 4.0-3)
    [2009-07-22 11:23] upgraded cairomm (1.8.0-1 -> 1.8.2-1)
    [2009-07-22 11:23] upgraded device-mapper (1.02.32-2 -> 1.02.33-1)
    [2009-07-22 11:23] upgraded devicekit-power (008-1 -> 009-1)
    [2009-07-22 11:23] upgraded dri2proto (2.0-1 -> 2.1-1)
    [2009-07-22 11:23] upgraded ptlib (2.6.2-1 -> 2.6.4-1)
    [2009-07-22 11:23] upgraded opal (3.6.2-1 -> 3.6.4-1)
    [2009-07-22 11:23] upgraded ekiga (3.2.4-1 -> 3.2.5-1)
    [2009-07-22 11:23] upgraded glibmm (2.20.0-1 -> 2.20.1-1)
    [2009-07-22 11:23] upgraded pango (1.24.4-1 -> 1.24.5-1)
    [2009-07-22 11:23] upgraded gtk2 (2.16.4-2 -> 2.16.5-1)
    [2009-07-22 11:23] upgraded libcanberra (0.12-1 -> 0.14-1)
    [2009-07-22 11:23] upgraded gnome-power-manager (2.26.2-1 -> 2.26.3-1)
    [2009-07-22 11:23] upgraded gstreamer0.10-base-plugins (0.10.23-1 -> 0.10.23-2)
    [2009-07-22 11:23] >>> Updating module dependencies. Please wait ...
    [2009-07-22 11:23] >>> MKINITCPIO SETUP
    [2009-07-22 11:23] >>> ----------------
    [2009-07-22 11:23] >>> If you use LVM2, Encrypted root or software RAID,
    [2009-07-22 11:23] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2009-07-22 11:23] >>> More information about mkinitcpio setup can be found here:
    [2009-07-22 11:23] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2009-07-22 11:23]
    [2009-07-22 11:23] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2009-07-22 11:23] ==> Building image "default"
    [2009-07-22 11:23] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2009-07-22 11:23] :: Begin build
    [2009-07-22 11:23] :: Parsing hook [base]
    [2009-07-22 11:23] :: Parsing hook [udev]
    [2009-07-22 11:23] :: Parsing hook [autodetect]
    [2009-07-22 11:24] :: Parsing hook [pata]
    [2009-07-22 11:24] :: Parsing hook [scsi]
    [2009-07-22 11:24] :: Parsing hook [sata]
    [2009-07-22 11:24] :: Parsing hook [filesystems]
    [2009-07-22 11:24] :: Generating module dependencies
    [2009-07-22 11:24] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2009-07-22 11:24] ==> SUCCESS
    [2009-07-22 11:24] ==> Building image "fallback"
    [2009-07-22 11:24] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2009-07-22 11:24] :: Begin build
    [2009-07-22 11:24] :: Parsing hook [base]
    [2009-07-22 11:24] :: Parsing hook [udev]
    [2009-07-22 11:24] :: Parsing hook [pata]
    [2009-07-22 11:24] :: Parsing hook [scsi]
    [2009-07-22 11:24] :: Parsing hook [sata]
    [2009-07-22 11:24] :: Parsing hook [filesystems]
    [2009-07-22 11:24] :: Generating module dependencies
    [2009-07-22 11:24] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2009-07-22 11:24] ==> SUCCESS
    [2009-07-22 11:24] upgraded kernel26 (2.6.30.1-1 -> 2.6.30.2-1)
    [2009-07-22 11:24] upgraded lib32-libdrm (2.4.11-2 -> 2.4.12-1)
    [2009-07-22 11:24] upgraded libdrm (2.4.11-2 -> 2.4.12-1)
    [2009-07-22 11:24] upgraded libpng (1.2.37-1 -> 1.2.38-1)
    [2009-07-22 11:24] upgraded libtracker (0.6.6-1 -> 0.6.95-1)
    [2009-07-22 11:24] upgraded lvm2 (2.02.47-2 -> 2.02.48-1)
    [2009-07-22 11:24] upgraded mesa (7.4.4-1 -> 7.5-1)
    [2009-07-22 11:24] upgraded nautilus-cd-burner (2.24.0-1 -> 2.24.0-2)
    [2009-07-22 11:24] upgraded perl (5.10.0-5 -> 5.10.0-6)
    [2009-07-22 11:24] upgraded pycairo (1.8.4-1 -> 1.8.6-1)
    [2009-07-22 11:24] upgraded xorg-server (1.6.1.901-3 -> 1.6.2-1)
    [2009-07-22 23:38] adding new group: ntp
    [2009-07-22 23:38] adding new user: ntp
    [2009-07-22 23:38] installed openntpd (3.9p1-7)
    Hope this helps in figuring out this problem, thanks for your help.

  • Mouse gesturing no longer works after recent update ?

    Recently, after an update my magic mouse no longer functions using the swipe gestures...Anyone else with this issue?
    tried to look at in in preferences bt no options there.

    Helpful link from 95bulls.  Here is the Apple link which deals with the more general problems one can have with an unresponding Mouse.   Is the green power light working or blinking?
    You don't say which update or give any details of the OS you use.    Please try to find a moment to update your profile.

  • MSI Live Update will no longer work after recent update

    Recently, MSI Live Update upgraded itself and now errors when a scan is attempted.  I can start the application, and the scan appears to occur but does not complete.  The error is pretty generic: 
    Microsoft Visual C++ Runtime Library
    Runtime Error!
    Program C:\Program Files (x86)\MSI\Live Update 6\Live Update.exe
    This application has requested the Runtime to terminate in an unusual way.  Please contact the application's support team for more information.
    First thing I did was uninstall the tool, delete the directory, reboot and download and install Live Update 6.x from the MSI  site.  No change.  I figured there was possibly a problem with (one of the) C++ Runtime libraries and checked the system requirements on the MSI website, but all it says its needs is the .NET runtime library.  I uninstalled it, rebooted, and reinstalled it but still received the same error.  Going with the error, I removed all of the C++ libraries (8, 10, and 12 I think), rebooted, and reinstalled them the checked MS for updates.   Sadly, this also didn't resolve it.
    Error in the application log didn't help:
    Faulting application name: Live Update.exe, version: 6.0.12.0, time stamp: 0x54768b62
    Faulting module name: Live Update.exe, version: 6.0.12.0, time stamp: 0x54768b62
    Exception code: 0x40000015
    Fault offset: 0x000e6ea8
    Faulting process id: 0x141c
    Faulting application start time: 0x01d019a539b60b20
    Faulting application path: C:\Program Files (x86)\MSI\Live Update 6\Live Update.exe
    Faulting module path: C:\Program Files (x86)\MSI\Live Update 6\Live Update.exe
    Report Id: 43510adb-8599-11e4-826e-d43d7ebc702d
    Faulting package full name:
    Faulting package-relative application ID:
    Yep, the package names were blank.
    Searching the forum didn't yield much.  Suggestions?

    Thanks for the suggestions - still in the same boat.
    @jb0nez
    what OS you are running? Windows 8.1 x64
    what MSI hardware you have?
    Board: Z87-G43 GAMING
    Bios: American Megatrends v1.9 (7/21/2014)
    Intel Core i5-4670 @ 3.40GHz (not overclocked)
    OS: Windows 8.1 Pro x64
    @jb0nez
    I fixed it though--went to Control Panel, Uninstall a Program, found Microsoft .net 4.5.1, hit Change/Uninstall, then clicked Repair. Rebooted after and it was fine.
    Windows 8.x has .NET 4.x preinstalled as a part of the OS.
    I used DISM.exe which identified a component store corruption (and repaired it).  Live Update still errors.
    Attempts to install from a .NET runtime returns an error of "A higher version is already installed".
    Version of .NET installed: 4.5.51641
    I did disable, reboot, and re-enable .NET as a feature but doing so does not revert it back to stock .NET.
    I also checked Windows Update after re-enabling it and there were no updates - so its not flushing the binaries if its disabled.
    At least I have a direction to start troubleshooting (.NET) - thanks for the tip!
    @jb0nez
    are you also use the same version? Live Update 6.0.012
    @TZBC
    Restore points are out - I let this slide too long.  If I go that route, I'll be fixing one app to break 10 others.
    If I'm going to reinstall the OS, I'll wait until Windows 10 (I'll do a complete wipe at that time).  Live Update  is a 'nice to have', but its not worth my  time to wipe the OS and rebuild the system.

  • I used to move an e-mail from my account to a local folder by click and drag which nio longer works after recent system updates but the move to does work.

    I'm using Thunderbird (a very good product) on an 8.1 system. I recently performed Microsoft updates and disk maintenance. I no longer can move an e-mail from my Thunderbird account to a local folder using "click and drag". I can't find a solution. The "move to" works just fine.
    Thanks for any help. Jim.

    hold shift while Thunderbird starts.
    In safe mode does it work?

  • My imessage is not Working after recent update

    My daughters iMessage & FaceTime no longer work after recent update, can anybody help please?

    It's mostly a server issue because millions of users are trying to do the same. Apple's servers get bogged down. Try waiting a bit - a day - before trying again. You can also check out this for other things to try.

  • We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    Zap the PRAM and Reset the SMC, then try again.

  • Canon iP2700 is no longer working after update

    My Canon iP2700 is no longer working after doing an update yesterday. I am using the cnijfilter-ip2700series 3.30-2  from  https://aur.archlinux.org/packages.php?ID=41797 with cups 1.5.2. I have blacklisted usblp, but this doesn't help. My printer is recognized, and apparently I can print but nothing happens. This is my error log:
    tail -n 100 -f /var/log/cups/error_log
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_busses=0
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_devices=0
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: +connecting-to-device
    D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
    D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: -connecting-to-device
    D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
    I [09/Mar/2012:13:58:16 +0200] [Job 4683] Waiting for printer to become available.
    D [09/Mar/2012:13:58:16 +0200] cupsdAcceptClient: 16 from localhost (Domain)
    D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 POST / HTTP/1.1
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
    D [09/Mar/2012:13:58:16 +0200] cupsdAuthorize: No authentication data provided.
    D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 1.1 Get-Notifications 1
    D [09/Mar/2012:13:58:16 +0200] Get-Notifications /
    D [09/Mar/2012:13:58:16 +0200] cupsdIsAuthorized: requesting-user-name="irenke"
    D [09/Mar/2012:13:58:16 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
    D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 WAITING Closing on EOF
    D [09/Mar/2012:13:58:16 +0200] cupsdCloseClient: 16
    D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    And this part keeps repeating every 5 seconds with different timestamp, until I delete the document from queue.
    The CUPS ownership of the USB device file seems OK:
    ls -l /dev/bus/usb/001/006
    crw-rw---- 1 root lp 189, 5 Mar 9 14:17 /dev/bus/usb/001/006
    I've been working on this problem since yesterday and now i'm stuck. Can someone please help?
    EDIT
    I think it's something related to the driver. If i change the driver to another printer model from CUPS the printer works. Prints garbage, but at least works. So this means that we have to wait for a new driver or what?
    Last edited by otx (2012-03-09 14:21:27)

    See if this is any help: https://bbs.archlinux.org/viewtopic.php?id=136415

  • Coldfusion 64 bit windows installer stops working after recent microsoft update

    Coldfusion 64 bit windows installation stops working after recent microsoft updates and how I worked around it.
    My question is at the end.
    Trying to deploy coldfusion 9 enterprise 64 bit trial  version onto a Windows 2003 64 bit datacenter OS with all OS updates from MS (as of 4-7-2011).
    Steps taken (remember, this is all 64 bit):
    1. Installed the base OS which was slipstreamed with SP2.
    2. Checked w/ microsoft and installed 63 OS updates.
    3. Launch the CF9 trial exe.
    4. As soon as the first screen finishes (the one that looks like  it is extracting files) then the second screen pops up (the one that  simply says CF Adobe Coldfusion 9) and the progress bar quickly moves  95% to the right and the install application quits. No error, no nothing. No log file either.
    5. After a moment of incredulous silence (and retrying/rebooting,  etc), I started to google it. I found nothing. However, I did find a  post (thanks dspent!) that was helpful in that it told how he was able  to get at a log file of sorts, by pre-extracting the  coldfusion_9_WWE_win64.exe file and launching the adobe_cf.exe by hand.  (Dspent's install snafu was different than mine, but his post was very  valuable and got me started in the right direction.)
    6. Got a copy of rarunzipper and extracted the coldfusion_9_WWE_win64.exe file.
    7. From the windows directory created by step 6, I launched adobe_cf.exe.
    8. Same thing (the install application quits. No error, no nothing. No log file either.).
    9. I examine the hs_err_pidxxxx.log file (where the xxxx is a number).
    10. I see inside that file an ominous message: "A fatal error has been detected by the Java Runtime" then "Problematic frame ntdll.dll" and then "The crash happened outside the Java Virtual Machine in native code".
    11. OK, so now I am thinking ntdll.dll !! Native code !! It is like Java is telling me that for some reason it can't dance with the OS.
    12. On a hunch, I decided to test a CF install again on a server with just the base install of W3K3 64 SP2 (ie: skipping step 2 above this time).
    13. Bingo! That install works.
    14. Therefore, one of the 63 patches I had downloaded from MS had triggered a problem with the CF installer.
    15. Back on the first server (the one with the MS security  patches installed and the one that CF won't install on). In the CF file  adobe_cf.lax (one of the files extracted in step 6) there is a line that  mentions where the install gets it's java. Find that file, and check java version installer is using. It is using 1.6.0_14-b08.
    16. Off to the Java website, and there is a newer version of java (1.6.0_24-b07). Downloaded and installed it.
    17. Modify a line in adobe_cf.lax :
       before
         lax.nl.current.vm=resource\\jre\\bin\\java.exe
       after
         lax.nl.current.vm=C:\\program files\\java\\jre6\\bin\\java.exe
    (that assumes that you let step 16 install to the default location)
    Save the file.
    18. Run the install ... ** IT WORKS ** !
    Obviously, the built in java provided with the CF installer is  no longer compatible with some change introduced by some recent MS  update on the W2K3 64b SP2 platform.
    And now the interesting part. Although I forced the installer to used the new java, it did not incorporate it into the cf build (ie: in jvm.config, you still see c:/coldfusion9/runtime/jre AND the  version of java.exe that is in that directory is the original version,  not the newer version I forced the installer to use).
    On the surface, CF seems to run OK, but I have not done any application testing yet.
    And finally my
    ** QUESTION **
    Would it be appropriate to simply point the java.home var to the new java directory? I see that the directory structures and files are not exactly the same  (close though) so I certainly don't want to break things by doing this,  but instinct tells me that if the installer broke using the older  version, then something else is gonna break down the road if I don't use  the new version. On the other hand, the differences in the  directories and files is enough that it makes me very nervous, with my  limitied java skill set, to make this decision. 
    Thanks in advance!!
    Byron

    Hi Byron,
    Wow great post no doubt much of the information will be useful for those on Win03 SP2 +. Have to say not come across similar problem on Win08 r2 SP1 +.
    So to your question. Adobe security bulletin (http://kb2.adobe.com/cps/894/cpsid_89440.html) recommends running CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do that. I take you installed JDK and not just JRE 1.6.0_24? Post install of JDK follow these steps:
    Stop CF - SERVICES.msc stop "ColdFusion 9 Application Server".
    Take a copy of CF\runtime\bin\jvm.config - so you got a backup.
    Edit CF\runtime\bin\jvm.config find line "java.home=" and comment it out eg:
    #java.home=C:/ColdFusion9/runtime/jre
    Add new line like so and save jvm.config:
    java.home=C:/Program Files/Java/jdk1.6.0_24/jre
    Note  there the slashes and the location of the JRE (runtime) - you need to  point to the one in JDK because the other JRE in C:\Program  Files\Java\jre6 will be missing a DLL.
    Start CF via SERVICES.msc.
    HTH, Carl.

  • My printer (HP Laserjet 2100) is no longer working after upgrading

    My printer (HP Laserjet 2100) is no longer working after the upgrade; it just spits out page after page of error codes and blank pages. I've tried using both the HP driver and a generic driver. This is being accessed over a network. Has anyone encountered this problem after upgrading from Lion?

    Hi,
    Make sure to install the latest HP Printer Drivers 2.11 update as it should resolve a Postscript printing issue and I believe it will resolve the problem.
    You may do so by clicking the Apple icon and then Software Update, you should see the update listed.
    For any further issue go to Library\Printers and remove the HP folder, then download and install the following package:
    http://support.apple.com/kb/DL907
    Hope it helps,
    Shlomi

  • Microphone no longer works after upgrade to windows 8.1

    After upgrade to windows 8.1 my internal microphone no longer works.
    I tried installing updates suggested in other posts with similar driver problems but they did not work.
    HPSupportSolutionsFramework-en-11.51.0048 did not work.
    My internal microphone is IDT High Definition Audio Codec
    When I go through the control panel  and look at it - it shows a status of "not plugged in"
    Please help 
    thanks

    OK I am a little confused.
    There has been no response on this subject in over a week. Not since I responded to your questions regarding product name and number.
    However I just received the following email from you:
    Hello gordml,
    The questions you posted on the HP Support Forum recently received one or more answers.
    Question: Microphone no longer works after upgrade to windows 8.1
    Date: Sun Dec 21 01:01:56 PST 2014
    View the answer(s).
    Did this reply resolve your post or question?
    If yes, then share the good news! Let others know this reply was helpful by accepting this solution.
    You can also show your appreciation by giving kudos.
    We appreciate your feedback. It's what keeps our community such a helpful, vibrant place for our members.
    Thanks for being a member!
    The HP Support Forum Team"
    Why would this be sent to me if there has been no recent replies on this issue?

Maybe you are looking for

  • Error while deleting the confirmation- Reason has to be entered for 102

    Hi, When i try to delete the confirmation for Goods, an error -"A reason has to be entered for movement type 102" is occuring. I have maintained the reason for rejection in the document tab at the line item level while deleting the confirmation.The r

  • Problem in rename a user in SU01

    Dear All , I am facing a issue while constructing a authorization template . Condition is like this :- User Admin is reponsible for X user group users & he cant copy,rname, delete,lock & unlock user of any other user group of X . All works fine but d

  • How to set up Environment for SOA Suite Tutorial

    Hi, I am just trying oracle products for the first time and recently started the SOA Suite Tutorial. Unfortuantely I am starving quite at the beginning in section "2.6.2 Create a Connection Pool". I just don't know what to enter as JDBC URL. I am usi

  • Info Record create at Plant level at the time of PO

    HI, Is the system create the Inforecord at plant level not at P.Org level.Problem is system can create the Inforecord at P.Org Level. If possibility that system create the Inforecord at plant level at the time of create the P.O. What  setting need to

  • MAX does not detect my PXI-5122 and PXI-6551 cards in a PXI-1045 chassis.

    I have been using a PC with MXI-3 to PXI-1045 chassis to develop LabView TestStand code.  Things are fine on my development PC.  [Software configuration report attached nireport_rich.txt]. I have a 2nd PC set aside to test my deployment packages.  I