PURGE CACHE MESSAGE-.ugggh!

I keep getting a message that says I need to purge the Cache. When I go to preferences and try, the window freezes. Nothing happens. I have to force quite out of Bridges. Also, ever since I started using the creative cloud my photoshop freezes up. Never had that issue before. Any suggestions? I have 100 photos to process so any help would be GREATLY appreciated. Thanks in advance.
Tamera Ford

When I go to preferences and try, the window freezes. Nothing happens. I have to force quite out of Bridges.
Could you provide details about what exact version of Bridge and OS you are using on what computer?
Meanwhile if you have pointed Bridge to a folder you can also purge cache for that folder using menu tools / cache/ purge cache for folders to see if that helps.

Similar Messages

Bridge CC. on opening message says unable to read cache, purge cache. This does not help.

On opening message says unable to read cache, purge cache. Purging the cache does not help and Bridge continues to hang. Was working fine before.

Mac? REad this http://forums.adobe.com/thread/1237168

When opening Bridge (CS6) I get the following message: "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I tried and after selecting purge cache it does not a

When opening Bridge (CS6) I get the following message: "Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation" I tried and after selecting purge cache it does not allow me to select OK. Also Bridge keeps saying "Building Criteria" with the spinning wheel and nothing happens. I tried uninstalling and reinstalling to no avail. Please help:)

Maybe a Preferences reset can help:
Numerous program settings are stored in the Adobe Bridge preferences file, including display, Adobe Photo Downloader, performance, and file-handling options.
Restoring preferences returns settings to their defaults and can often correct unusual application behavior.
Press and hold the Ctrl key (Windows) or the Option key (Mac OS) while starting Adobe Bridge.
In the Reset Settings dialog box, select one or more of the following options:
Reset Preferences
Returns preferences to their factory defaults. Some labels and ratings may be lost. Adobe Bridge creates a new preferences file when it starts.
Purge Entire Thumbnail Cache
Purging the thumbnail cache can help if Adobe Bridge is not displaying thumbnails properly. Adobe Bridge re-creates the thumbnail cache when it starts.
Reset Standard Workspaces
Returns Adobe predefined workspaces to their factory default configurations.
Click OK, or click Cancel to open Adobe Bridge without resetting preferences.

PS6: get message, purge cache in preference while using Bridge, everything freezes.

message says: please try purging the central Cache preference to correct situation. This comes up in Bridge.
I tried the purge, but nothing happens, Bridge freezes, and I can't exit out.

Restart Bridge holding down Ctrl (win) or Cmd (mac) and choose reset preferences and purge cache.
If that doesn't work, try looking through this other thread: Cache issue with CS6 Bridge

New update 8.7.1 CS6 ACR not working---(I own hard copy not a Trial or part of CC), I purged cache in bridge, and photoshop. NO photos will open when I double clik, or will not open again in ACR alone. When I double clik on raw file I get Sign In requir

I purged cache in bridge, and photoshop. NO photos will open when I double clik, or will not open again in ACR alone. When I double clik on raw file I get Sign In required Notice--We will now register your TRIAL to your Adobe ID-------I am alread a SUBSCRIBER-------------Yes I get this same issue in Creative Cloud and same issue. error: Camera Raw editing is not enabled-----Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature. These errors are happening inside both CS6 Bridge and CCphotoshop Bridge------NOTE----I am ALREADY signed into Creative Cloud and still get those message errors.........Need to fix ASAP.

When you sign in to Adobe.com with the user ID and Password your using in the Creative Cloud and Photoshop does this link https://www.adobe.com/account/my-products-services.html show that the account has a subscription?
Also this is a user forum not a Adobe Customer Services web site.

Bridge CC is asking my to 'purge cache'. When I do this doesn't work and freezes my mac. Bridge is unable to work at all. Please help?

When I start up Bridge CC I get a error message instructing me to purge cache in preferences which I do but it doesn't work and freezes my mac. I cannot curretnly use Bridge CC. PLease help as this is costing me time and money - thank you in advance....

Hold down the Option key as you launch Bridge, keep it down until you see a dialog box, then click all three options in the re-set box that comes up.
If you don't see that re-set box, you're doing it wrong, i.e., you're not holding the Option key down fast enough.

Bridge CC asks to Purge Cache but freezes when I try to do so

Am using Bridge on a MAC. Each time I open Bridge an error message comes up requesting to Purge Cache via preferences - But when I try to do this, it freezes.
In fact, even before trying to purge cache, if I try navigating to another folder on Bridge it also freezes.
Have trashed Bridge, downloaded it again and reinstalled - problem continues.
What should I do?

Yes that worked - THANKS.
I created a new cache folder and deleted the other - and now it works!
I had to show hidden files via terminal to delete the previous cache folder.

Purge Cache Error in OBIEE 11g (11.1.1.5.0) in Linux Env.

Hi all,
I following the following blog to purge cache in Linux.
http://shivabizint.wordpress.com/2010/12/22/purge-bi-server-cache-in-obiee11g/
When I excute I get the following error message. Can someone help me to fix this issue? Thanks
          Oracle BI ODBC Client
          Copyright (c) 1997-2011 Oracle Corporation, All rights reserved
[0][State: IM002] [DataDirect][ODBC lib] System information file not found. Please check the ODBCINI environment variable.
Connect open failed
Connection open failed:
[0][State: IM002] [DataDirect][ODBC lib] System information file not found. Please check the ODBCINI environment variable.
Connection open failed

I have exported ODBC path manually.
export ODBCINI=$ORACLE_INSTANCE/bifoundation/OracleBIApplication/$ORACLE_BI_APPLICATION/setup/odbc.iniAnd then executed the nqcmd command. Now I am getting the different error.
           Oracle BI ODBC Client
           Copyright (c) 1997-2011 Oracle Corporation, All rights reserved
Initialize client environment failed, possibly caused by incomplete installation
[nQSError: 47001] Invalid Oracle BI Bin directory:
/oracle/home/bifoundation/server/bin.
Initialize client environment failed, possibly caused by incomplete installation
[nQSError: 47001] Invalid Oracle BI Bin directory:
/oracle/home/bifoundation/server/bin.
[0][State: IM004] [DataDirect][ODBC lib] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed Connect open failed

Bridge CC hangs upon opening, suggests purging cache which dies nothing except make issue worse

Have had issues with Bridge becoming increasingly and painfully slow in loading/previewing its thumbnails on all machines in the studio.
We have purged cache as per suggestions from the opening error messages but this has only made matters worse to the extent that now it wont load its previews at all.
Ive reinstalled Bridge three times now. Even after reinstalling Bridge still retains last folder browsed information and will attempt to navigate to that folder regardless what you are trying to select.

Have had issues with Bridge becoming increasingly and painfully slow in loading/previewing its thumbnails on all machines in the studio.
We have purged cache as per suggestions from the opening error messages but this has only made matters worse to the extent that now it wont load its previews at all.
Ive reinstalled Bridge three times now. Even after reinstalling Bridge still retains last folder browsed information and will attempt to navigate to that folder regardless what you are trying to select.

CS6 Bridge says encountered problem, purge cache

Hi there Forum Room, Please can anyone help.
I have been running photoshop CS6 for about 2yrs on my iMac running with 6gb Ram. Whenever I open Bridge I get this message and then it locks.
"Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation"
The only way to close the program is to force quit
I have tried purging, through Tools > Cache > Purge cache > But it still locks up, the little circle in the bottom left corner keeps going round and never stops this has been going all night and nothing has changed.
I have tried uninstall and reinstall but bridge has this problem again, Photoshop works good but I have no preview area to view photos before editing !......Please Please can anyone help

hnz5758 wrote:
i attempt to open preferences, and clear out cache, it does not work.@
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Purge Cache

Every time I start up Adobe Bridge, I get an error message which reads, "Bridge encountered a problem and its unable to read the cache. Please try purging the central cache in Cache Preferences to correct."
I then go into Adobe Bridge Preferences > Cache > Manage > Purge Cache. After clicking on Purge Cache, I continue to have the same error message after restarting my computer and opening up Adobe Bridge. In addition,
my thumbnails continue to load up slowly.
What do you think the problem is?

What do you think the problem is?
A corrupted cache folder. Quickest solution is to Quit Bridge and delete the content of the whole Bridge Cache folder manual.
Not clear what system you are using neither what version of Bridge and OS. I only know the path for a Mac, Windows might be similar.
Go to the user library (per MacOsX 7 hidden by default, in Finder use menu Go with option to reveal).
Here is the path:
User (your username)/Library/Caches/Adobe/BridgeCSxx/ - Inhere are two files, a plug in cache and a folder called cache.
Drag both items outside the library, preferable to the trash.
Restart Bridge (both deleted items will be recreated and fresh but empty) and try again.

I have problem with adobe bridge cs6. Every time I open it Bridge tells me to Purge Cache. I have CS

I have problem with adobe bridge cs6. Every time I open it Bridge tells me to Purge Cache. I have CS6 on two computers and it works fine on one of them. I have tried to reinstall it without succeeding to fix the problem. Does anyone have the same problem and a solution to it?
"Bridge encountered a problem and is unable to read the cache. Please try purging the central cache in Cache Preferences to correct the situation."

You must have a Mac. Try this.
Quit Bridge, from user library (NOT system and root library) preferences folder find and delete the com.adobe.bridge5.plist file manual. Do this also in same user library caches folder (Caches/Adobe/Bridge CS6) and inhere find and the folder called 'cache' and drag it to the trash.
restart Bridge holding down option key and choose reset preferences, then try again.

Cache messages in JMS

Is there a mechanism of caching messages in MSMQ or JMS where I need to code to fetch these messages and later process them.
Any links to any url supporting this feature is appreciated.
rgds,
Seetesh

Just use the JMS API or a JMS-like API for the programming language of your choice and you should get the benefit of message-caching.
http://incubator.apache.org/activemq/C+Integration
http://incubator.apache.org/activemq/dot+Net
http://incubator.apache.org/activemq/Stomp
James
http://logicblaze.com/
Open Source SOA

Purging cache for each Business Model / Fact Table Source

Morning all,
I try to understand how can i schedule purging obiee cache.
. OBIEE is used with Essbase database
. one database for Australia, one for France and one for USA
I want to purge cache for each region after daily loading process (scheduled at different time) but Call SAPurgeAllCache() seems too radical
Can you explain me steps to use to purge Business Model cache ?
Currently I have to connect to Administration => Manage Cache => Clear Cache by Business Model and is not automatic !!
Thanks for your help

hi Saichand,
I am not sure that could work with essbase physical mapping.
OBIEE documentation doesn't translate this information for Essbase database :
.DBNames
.CatalogName
.Schema
.table
create table UET (
UpdateType Integer not null,
UpdateTime date DEFAULT SYSDATE not null,
DBName char(40) null,
CatalogName varchar(40) null,
SchemaName varchar(40) null,
TableName varchar(40) not null,
Other varchar(80) DEFAULT NULL
In step 4 :
I can't add ETL code because loading process works on essbase side and not in dataware environnement...
Thanks

Using nqcmd command to purge cache

Hi,
I'd like to ask a question,
in OBIEE11G, I need to use nqcmd command to purge cache,
in server I run below commond:
nqcmd -d coreapplication_OH1568635987 -u weblogic -p weblogic1 -s C:\purgecache.txt
in purgecache.txt is following command:
call sapurgeallcache()
it's ok in server,
now I want to run this command in other machine,like I want to use informatica to invoke this commant to purge cache in schedule time.
how to do it?
thank you in advance!

lets assume the column name is etl_end_time
Agents can be controlled using reports(analysis in 11g). There is a Condition tab while creating agents which can be used to control agents based on output of the report.
Lets say u create a dummy report. In that you are putting some dummy column. In the Edit formula dialog, use the TIMESTAMPDIFF function to compare your etl_end_time and current_time.
Lets say you are setting the TIMESTAMPDIFF function to return the difference in minutes. Then create a filter on this column with operator as greater than or equal to and value as say 1 minute( this is ur choice)
So this report will now return true when the difference between the time stamps is greater than 1 minute (which means it will become true 1 minute after the etl is over). Suppose you configure the agent to check the condition every 1 minute then at one point when the agent runs, this report will return true and agent is triggered
This agent will then call you purge command
You can of course add another filter to the dummy report as less than or equal to 5 minutes because the timestamp difference of the current time and the previous etl runs will also be greater than 1 minute ;) So to make sure only the latest etl end time is used you can add a second filter as just said.
Phew.. :) hope I made myself clear

PURGE CACHE MESSAGE-.ugggh!

Similar Messages

Maybe you are looking for