Purging events prior to specific date on a Palm Pilot Z22

I want to delete (purge) from my Calendar all events prior to a certain date. Any ideas how?
Thanks.
This question was solved.
View Solution.

@LPatHP
What was the solution? I'm struggling to help user millershrink in another recent HotSync thread that sounds like a similar issue to yours!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Fail to add all day event on a specific date

Hi, my ical fail to add all day event on a specific date 2nd of Oct, when i double clickto add all day event, it falls on the 1st or 3rd but not the 2nd?

Hi Maggie,
Yes you can change your timezone, but in my opinion only Apple can really fix this problem. The more people they know are having the this issue the more likely Apple will fix it. Therefore I suggest you send them feedback about the problem.
Best wishes
John M

Events before a specific date not showing up on Calendar List View

I used to be able to view events as far back as they go in Calendar's List View. Since upgrading to iOS 7, I can't see events before September 23, 2012 in the List View (by pressing Search icon). Is it because there technically is no longer a List View in the new iOS 7? I'm confused why 9/23/2012 was selected as the cutoff date.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Calendar can't access/insert events on a specific date

Since 2009 I've been experiencing problems inserting and viewing events around the day october 17th - weird but is my marriage date.
I know that very well because was the time I started using alot more the calendar because of the huge "to do lists" I had that time. Since then I tried to export date (backup) delete the files and restore the date. Somehow every oct 17th on my calendar (+one day more o less) is blocked on my computer.
Unfortunately I don't have a genius bar in Brasil and during trips to the US I always had limited time and in Miami a representative asked me to re-install everything but wasn't possible at that time. I did it afterwords - by myself - and didn't chance. Now, with mavericks I went to 2010 for no reason and found out it is finaly working fine all years since 2009. Problem: now the October 20th is behaving just like.
Seem to me that I can't access the day but when I change de view from month to week I see there's no sunday oct 20th at all (see attach_1) and whe I change to daily view the right side of the day is empty and all my tries to add an event on the 20th ended up on the 19th...
What can I do ? I use macbook air with mavericks just upgraded.
Thank you.
Claudio.
Rio de Janeiro - Brasil.

Hi,
Your problem seems to be similar to mine, with events changing 1 day position.
https://discussions.apple.com/message/23568141#23568141
Before Mavericks I used latest Mountain Lion, without this problem for sure.
To me, seems like a bug that Apple needs to solve.
Regards,
Fabrício

Exporting iCal events in a specific date range

Is this possible? I want to export events from one calendar, but only in a certain date range, to give to another user to import into their iCal calendar...

Try making a rule or a Smart mailbox to delete them.
Rules, Smart Mailboxes, and VIPS

Cannot create new Events in specific Dates???

I am having a problem creating a new event for a specific date, November 4th. What I did: I duplicated an event that took place in October 30th and dragged it to the desired date, in Monthly View, but iCal doesn't let me drop it in the day I want. The event can be dropped in the previous (3rd) or the next day (5th).
When I use Daily View, i can navigate up to November 3rd, but then the left-arrow button does not take me to 4th.
Has this happened to anyone? Can anybody help me?
(by the way, I am using iCal 2.0.5).

Hmm....I was able to fix my issues. I'll share it here in the event it can help you.
While iCal was closed I simply moved to trash the folder "/Users/<my username>/Library/Application Support/iCAl/" I then re-opened iCal and I could then create new or import old ".ics" files, close iCal and re-open with all information being retained. Sweet!

Send mail on specific date and time

Does anyone know how can I tell Mail to send a mail on a specific date and time?

Mail won't do it by itself, but iCal will. Create an event at the specific date and time you want the mail sent. You will then need to create a simple applescript to send the desired email content to the desired recipient. Then instruct iCal to 'run script' at the desired time.
Check out the applescript forum here on Apple Discussions for help with the applescript.
It will be a FUN learning experience!

How to return a specific date/time range and last event details, when checking the event log via command prompt

I am new to scripting (literally started reading/learning scripting a few hours ago), and I am stuck in trying to get my current script/command to filter a specific date range.
* Note: I am working with Server 2003 and 2008; because of the environment I am in, a lot of scripts (such as Powershell and VBScript) don't work; trying to stick with command line, as it appears to be the only thing that functions correctly in my environment
I am trying to search the System log in event viewer, for the most recent server reboot. Here is the command that I am currently running:
===========================================================
C:\Windows\System32\cscript C:\Windows\System32\eventquery.vbs /L System /FI "id eq 1074"
===========================================================
When run, the output looks like this:
===========================================================
Microsoft (R) Windows Script Host Version 5.6
Copyright (C) Microsoft Corporation 1996-2001. All rights reserved
Listing the events in 'system' log of host 'xxxxxxxxxxxxxxx'
Type Event
Date Time Source
Information 1074
12/18/2013 2:48:06 AM USER32
Information 1074
11/20/2013 3:25:04 AM USER32
Information 1074
10/23/2013 2:06:09 AM USER32
===========================================================
What I would like it to do is only show events that have happened in the last seven days, as well as show the event details if it does find an event that matches the criteria.
Any help would be greatly appreciated. Thanks!
Nick

I would prefer using Powershell , you can use below code
function Get-EventViewer
param(
[string[]]$ComputerName = $ENV:COMPUTERNAME,[string]$LogName,[int]$eventid
$Object =@()
foreach ($Computer in $ComputerName)
$ApplicationEvents = get-eventlog -logname $LogName -cn $computer -after (Get-Date).AddDays(-7) | ?{$_.eventid -eq "$eventid" }
foreach ($event in $ApplicationEvents) {
$Object += New-Object -Type PSObject -Property @{
ComputerName = $Computer.ToUpper();
TimeGenerated = $event.TimeGenerated;
EntryType = $event.EntryType;
Source = $event.Source;
Message = $event.Message;
$column1 = @{expression="ComputerName"; width=12; label="ComputerName"; alignment="left"}
$column2 = @{expression="TimeGenerated"; width=22; label="TimeGenerated"; alignment="left"}
$column3 = @{expression="EntryType"; width=10; label="EntryType"; alignment="left"}
$column4 = @{expression="Source"; width=15; label="Source"; alignment="left"}
$column5 = @{expression="Message"; width=100; label="Message"; alignment="left"}
$Object|format-table $column1, $column2, $column3 ,$column4 ,$column5
$Object.GetEnumerator() | Out-GridView -Title "Event Viewer"
You can do a function call like
Get-EventViewer -LogName system -ComputerName "computername" -eventid "2017"

Is it possible to enter events into a specific iCal calendar, then print a list of those events with the name and date on a single sheet?

Is it possible to enter events into a specific iCal calendar, then print a list of those events with the name and date on a single sheet? I don't need the calendar grid. I just want a list of events on a particular calendar, and their dates. Is that possible?

Not easily. Two possibilities:
1) If all the events have some common feature (eg you have included "XXX" in all the summaries), search for that feature then select and copy the found items at the bottom of the window. You can then paste them into TextEdit or a spreadsheet for printing
2) You could write an Applescript to locate the events and write them into a text file for printing.
The first one will probably give you what you want.

Grabbing an event from a specific calendar by date

Is there a way to grab an event from a specific calendar by date?
Basically, I receive an email with information I want to put in the event name (title?) - it is in a particular calendar, and a on a particular date. I grab that event, update the event title with the information i parsed from the email message (i've already got that part done).
I've looked through many applescript examples, but they all seem to deal with creating an event, not updating one.

It's quite easy if you know specific value of the event, the following change summary property of the event:
tell application "iCal"
set _event to first event of calendar "Home" whose summary contains "Test..."
set summary of _event to "More Test..."
reload calendars
end tell
However, things get complicated when you try to get repeated events, because repeat events don't really have true start date and end date. So it's really difficult to get a repeat event by its start date or end date. See this thread:
http://discussions.apple.com/thread.jspa?threadID=440481&tstart=0

Event at a specific moment of a data acquisition

Hi!
I'm trying to create a VI which should perform data acquisition during which an event should happen.
The full problem is:
I have to do data acquisition (sampling rate up to 100000 samples/sec) of the voltage of a deformed 60 Hz sine wave signal. This data acquisition is saved into a file (Excel or DIAdem compatible) and is not displayed to the user of the VI in real-time (no worrying about displaying a graph). The problem is that after a fixed number of periods has been acquired, at a specific angle of the ideal sine wave (0° being the beginning of the sine wave, 90° the positive maxima...), a digital signal has to be sent to modify part of the circuit we are analysing, while continuing to gather data. I know that using an analog trigger, I can find a 0° point easily, then, knowing the sampling rate and the input signal's frequency, I know the number of samples to wait before the angle. What I don't know though is how to do this event at that specific moment without interrupting the data acquisition.
I am using LV7.1 with a NI-6110 DAQ device configured with NI-DAQmx. If you need additionnal information to answer, then just ask me.
Thanks!

Hi Maxime-
I'm not sure why your counter would be counting too fast, but it might have something to do with the comparator circuit. Are you able to count edges successfully with your counter? I would suggest using the LabVIEW shipping example "Count Digital Events.vi" that can be found by accessing Help>>Find Examples in LabVIEW and then browsing to Hardware Input and Output>>DAQmx>>Counter Measurements. You will need to connect your comparator output to the source input of the counter.
If this VI works for you then I have another suggestion along the lines of Kevin's earlier suggestion to use two counters. The counters on your board can be configured to output a pulse once the counter reaches your Terminal Count (i.e. the highest value the counter can reach before rolling over to zero). Your PCI-6110 has 24-bit counters, so the terminal count will be 2^24-1 or 16777215.
By using the first counter to count zero crossing events from your comparator and setting the initial count to be a certain number of counts less than the Terminal Count you can output a pulse after a user-specified number of rising edges. This output can then be routed to trigger pulse train generation on the second counter of specified frequency and length. Finally, you can route this generated pulse train to be the external clock for your analog input operation.
I have attached a modified edge counting example that shows how to route the terminal count to a pin that can be used to trigger the pulse train on the second counter. For an example of AI operation with a counter-generated pulse train, check out "Multi-Function-Ctr Retrigg Pulse Train Generation for AI Sample Clock.vi" in the Hardware Input and Output>>DAQmx>>Synchronization>>Multi-Function folder in the Example Finder.
Thanks-
Tom W
National Instruments
Attachments:
Count Digital Events with Output Pulse.vi ‏64 KB

Purge Cache for a Specific Business Model

Hi everyone,
I have a obiee(11) report purging all cache entries (as Call SAPurgeAllCache()). Is there a method to purge cache partially for specific business model entries and not to purge all the cache ?
Thanks ...

Hi,
To selectively purge, you could use SAPurgeCacheByQuery, SAPurgeCacheByTable or SAPurgeCacheByDatabase. Alternatively, Event Polling Tables may help. See http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/querycaching.htm#i1005542 and http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/querycaching.htm#i1010207.
Also see the section on BI Server caching here : http://www.rittmanmead.com/2013/03/optimising-obiee-performance-tuning/
SET VARIABLE DISABLE_CACHE_HIT = 1
It will purge the cache for that report.This is just wrong. DISABLE_CACHE_HIT only DISABLES cache use for the query execution, it does not PURGE it
You may go for this DISABLE_CACHE_SEED for more info http://docs.oracle.com/cd/E23549_01/bi.1111/e10540/variables.htm
What's the point of DISABLING use of the cache, if the OP wants to use the cache?
set the cache persistence time for the related physical tables. so based on the time interval u set, at that time specific tables only will get cache purged.This is only the time from which the entry got loaded into the cache, so is not a good way to manage the purging of the cache usually - because it has no relation to when the data got loaded to the database

Recurring Events not gets all data in a given month in C#

Help me about this. I cannot get all the records of recurring events in Calendar. Even using <Month> ,<Year>. it doesn't give the all records. that happens when adding no end date of recurrence.
ex. i want to filter all records on the 10-01-2018 by its month but it appears like in different result range of date. cause i've tried creating an event in calendar with recurrence of Daily weekday=true and no end date. then i don't why it doesn't give the
correct result and just tried this date as sample.
here's the image of what trying to get:
https://social.msdn.microsoft.com/Forums/getfile/621163
here's the data showing when getting it.
http://community.office365.com/cfs-file.ashx/__key/communityserver-discussions-components-files/154/0841.img.jpg
Here's the code:
var list = xWeb.Lists.TryGetList("TestCalendar");
var oQueryBookings = new SPQuery();
oQueryBookings.CalendarDate = new DateTime(2018,10 ,1);
oQueryBookings.ExpandRecurrence = true;
SPListItemCollection oCollBookings = null;
string strViewField = "<FieldRef Name='RecurrenceID' />" +
"<FieldRef Name='Duration' />" +
"<FieldRef Name='Title' />" +
"<FieldRef Name='EventDate' />" +
"<FieldRef Name='EndDate' />" +
"<FieldRef Name='Location' />" +
"<FieldRef Name='Category' />" +
"<FieldRef Name='Description' />" +
"<FieldRef Name='fRecurrence' />" +
"<FieldRef Name='RecurrenceData' />" +
"<FieldRef Name='fAllDayEvent' />" +
"<FieldRef Name='TimeZone' />" +
"<FieldRef Name='EventType' />" +
"<FieldRef Name='UID' />" +
"<FieldRef Name='XMLTZone' />" +
"<FieldRef Name='LinkTitle'/>";
oQueryBookings.ViewFields = strViewField;
string strQuery =" <Where>" +
" <DateRangesOverlap> " +
" <FieldRef Name=\"EventDate\" /> " +
" <FieldRef Name=\"EndDate\" /> " +
" <FieldRef Name=\"RecurrenceID\" /> " +
" <Value Type=\"DateTime\" IncludeTimeValue=\"TRUE\"> " +
" <Month /> " +
" </Value> " +
" </DateRangesOverlap> " +
" </Where> " ;
oQueryBookings.Query = strQuery;
oCollBookings = list.GetItems(oQueryBookings);
if (oCollBookings.Count > 0)
DataTable objDatatable = new DataTable();
objDatatable = oCollBookings.GetDataTable();

Hi,
Per my understanding, you might want to get all the recurring events within a specific month using C#.
Here is working code demo about getting recurring events by month for your reference:
public static void getRecurringEvents()
using (SPSite site = new SPSite("http://sp"))
using (SPWeb web = site.RootWeb)
SPQuery query = new SPQuery();
query.ExpandRecurrence = true;
query.Query = "<Where><DateRangesOverlap><FieldRef Name=\"EventDate\" /><FieldRef Name=\"EndDate\" />" +
"<FieldRef Name=\"RecurrenceID\" /><Value Type=\"DateTime\">" +
"<Month />" +
"</Value></DateRangesOverlap></Where>";
//get the events in the specific months
query.CalendarDate = DateTime.Now.AddMonths(-1);
SPListItemCollection calendarItems = web.GetList("/Lists/Calendar1").GetItems(query);
foreach (SPListItem item in calendarItems)
Console.WriteLine(item["Title"] + ": starts "
+ item["EventDate"].ToString() + " and ends "
+ item["EndDate"].ToString());
It will return all the recurring events of last month:
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Use a "Write" Event on a Specific Drive or to a Specific Folder to Trigger a Task in Task Scheduler

I first posted this question on the Microsoft Community forum. It was suggested that I repost it here.
I have a question!
(Pleas forgive the long post...)
What I am trying to do: (This is what I have not yet figured out!)
I am trying to figure out how to trigger a task, in Windows Task Scheduler (WTS), whenever a "Disk Write" event occurs on a specified drive on the machine. - Or, more specifically, whenever a new file or folder is written or
saved to a specified Folder, or a specific Disk Partition, or a specific Hard Disk on the machine - whichever is more relevant for the end goal.
The overall goal:
When a "disk write" operation occurs and data is written to a specified location on a Hard Drive, start a Program at the beginning of the following hour, that will run a backup of the contents
of that location, (after - of course - the new data has been written). After the backup is complete, disallow the program from being started again at the beginning of the next hour, unless more data is written to the specified location beforehand.
Example:
At 2:27pm, I save a new word document to "D:\My Folder\". When the new Word doc file is saved to "D:\My Folder\", my preferred Backup software application is then scheduled to run a backup at the beginning of
the following hour - at 3:00pm - which will then create a new backup of "D:\My Folder\".
The backup software will NOT be scheduled to run again at the next following hour - at 4:00pm - unless another file or additional data is written to "D:\My Folder\" - between 3:00pm and 4:00pm.
Summary:
The goal here is to only run a backup at the beginning of the next hour, following a “disk write” event to a specified location on the hard drive.
Steps that I have, so far, on how to make this happen:
Whenever data is written to a specified location on a hard drive (i.e. "D:\My Folder\"), "Task A," in Windows Task Scheduler, will be triggered to execute its action.
The Action in "Task A" will run a script that changes the Status of "Task B" to ENABLED.
The Action in "Task B" will, on a continuous hourly schedule, start a program that will perform work on the machine. (In this case, it will run a Backup Task in my preferred backup software.)
Upon completion of work by that program (the Backup software), that program will run another script that will change the Status of "Task B" back to DISABLED; preventing "Task B" from continuing that program every hour
according to its hourly schedule.
How do I do this: ... ?
The thing holding me back on making this work is figuring out how to identify the source that generates the “disk write” event and event ID I need, so I can use it to trigger a task in Windows Task Scheduler - in the way that I need. Furthermore,
the “disk write” event needs to specific to a disk drive that I specify and if at all possible, specific to a location that I specify, i.e. “D:\My Folder\”.
Any help on this as well as other suggestions on making this work is greatly appreciated!
Ryan A Miller

Hello Ryan A Miller,
What is your current situation?
Have you try the script as Frederik Long mentioned?
To receive better support, it is recommended to post in the TechNet Script forum.
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
The professionals there will be glad to help you.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

User login report in Active Directory for specific date and time

I want to get User login report in Active Directory for specific date and time e.g user logged in at15-01-2015 from 8:00am to 4:00pm
Is any query, script or any tool available?
Waiting for reply please

You can identify the last logon date and time using my script here: https://gallery.technet.microsoft.com/scriptcenter/Get-Active-Directory-User-bbcdd771
If you would like to get back in time and see when the user did a logon / logoff then you need to have auditing enabled. Once done, you can records from Security log in the event viewer: https://social.technet.microsoft.com/Forums/windowsserver/en-US/98cbecb0-d23d-479d-aa65-07e3e214e2c7/manage-active-directory-users-logon-logoff-events
I have started a Wiki about how to track logon / logoff and it can help too: http://social.technet.microsoft.com/wiki/contents/articles/20422.record-logon-logoff-activities-on-domain-servers-and-workstations-using-group-policy.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Purging events prior to specific date on a Palm Pilot Z22

Similar Messages

Maybe you are looking for