Purity By Monster impressions

Hi
I wanted to share my thoughts about my experience with the 3 different headphones that www.puritybymonster.com offer.
* WH-930
These wher the first ones I tried out, the sound quality was pretty good but since they are the "On ear" type they started to hurt my ear after a little while. I really liked the cable that came with it though since it could control answer the phone and volume up/down
* WH-920
This is the "in-ear" type which I couldn't use at all, they could simply not stay in the ear but kept poping out. And the sound quality was not very impressive at all.
* BH-940
These are the most expensive "around ear" headphones they offer and let me tell you I had some high hopes for theese ones. They are very stylish, great features and really good sound quality. The noise cancelation also worked very well. But they are too heavy and have to little headband couching, therfore they where uncomfortable after a litte while.
I must say that after have tried all these 3 models I'm very disapointed since they are made specificaly for the Nokia phones in mind, and they have all the funcionality that should be there. I mean headphones need have great sound, be stylish and all that, but they have to be comfortable to wear otherwise it does not matter.
Now I find myself looking at other headphones like the Sennheiser PXC 450 or the Bose QuietComfort 15, they don't have the ability to skip track or answer the phone using a cable but they are at least comfortable and are supposed to have great sound too.
I have been using the iPhone eco system for quite a while but have jumped over to Lumia 920, but is quite disapointed by the lack of acessories, Nokias colaboration with Monster should have produced better headphones.

All you will get here are experiences and guesses. Nokia does not repspond to posts here. You best bet would be Nokia Care.
My experience would be that it works fine.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Similar Messages

Nokia Purity red on-ear headphones

Does anyone have an idea of where to buy the red version of Nokia Purity by Monster WH930 headphones? (not the pro-version) There seems to be not a single physical store in Belgium nor an online store that sells them...
Any help would be much appreciated!

Don't know what stock levels are: http://poundmart.com/nokia-purity-stereo-headphones-fuchsia-p-2726.html?language=en&currency=EUR
Happy to have helped forum in a small way with a Support Ratio = 37.0

Faulty Nokia Monster WH-920 Purity headset - Care ...

I won the black Nokia Monster WH-920 Purity headset at the Window into event last May (30/05/12) , there is no sound coming out of the left earplug. The product has a 12 month warranty but on taking it to Care point in Kilburn and are refusing to arrange a replacement or to help further because the serial number brings up no data on their system. Essentially I am the victim of a procedural error and the lack of support from the care centre shows no care at all!
I am not a happy customer. Can someone take ownership of the issue and get in touch please?

Nokia must do this a lot, I won a competition recently too. I recieved a phone, bluetooth speaker and WH-920 headphones. Phone seems fine so far. However both speakers and headphones are obvious returns from unhappy customers. Both packages have two security stickers, one put on top of the previously cut open other sticker!! My headphones are stuck in mic mode i believe as the sound is distance and echoey. When i hold the button on the control down the sound is perfect. Also the speakers picks up loads of interference and skips even though the phone is sat next door to it! I've sent a e-mail to Nokia, I wonder if I will get a reply.

Does Nokia Monster Purity headset have warranty?

Hello,
I purchased my Nokia Monster Purity headset in August 2012 from Amazon.com here in U.S. (http://www.amazon.com/gp/product/B0074F5IH4/).
Unfortunately, the left speaker stopped working yesterday, and I tried to figure out if it is under warranty or not, but I couldn't find any information on Amazon.com.
Does anybody know if this headset has warranty and if so, how to go about the warranty process?
Thank you!

Whilst normally Nokia accessories included with device have a warranty for six months, it says 12 months upon the WH-920 box or at least it does for Euro 1 version!
Probably you will get nowhere with Nokia support as you can't give them an IMEI so maybe "Catch 22" situation.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Nokia Purity Stereo Headset by Monster Compatibili...

Hey guys just looking into info if the Nokia Purity in ear headset is compatible with the Lumia 920? I'm after full ability to change tracks, pause, answer calls and toggle volume.
I keep getting different answers. Some say yes some no and some say no to start with but now yes due to a recent driver update by nokia. So a final answer would be good before wasting $100+.
If the answer is no suggestions of any other in ear headset with works in such a way would be handy.
Thanks in advance.
Solved!
Go to Solution.

All you will get here are experiences and guesses. Nokia does not repspond to posts here. You best bet would be Nokia Care.
My experience would be that it works fine.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Nokia Purity Stereo InEar Headphones - Only workin...

I have a set of Nokia Purity Stereo InEar headphones that I was given for my B-day in November. Yesterday they started just playing content in Mono (ie the right hand speaker no-longer works...) Everything else works. I have tested it in a number of audio jacks and its definitely not working. There does not seem to be any support for these on the Nokia or Monster Purity website, it just sends me to some random page with twitter and facebook links and this discussion.
Anyone got any ideas or guidance?

@ashmonsterr
Although this applies to Lumia 920 Euro version, in as much as Start/Stop, change track, volume + & - there are no issues using WH-920 with my 920; as I decline Microsoft terms for voice control I can't say for this function.
Happy to have helped forum with a Support Ratio = 42.5

Wireless Charging on Purity Pro

I am in the market for wireless headphones and I know that the new windows/lumia system and accessories are all doing the wireless charging. This doesn't seem to be the case for the wireless purity pro. Correct me if I'm wrong but this seems to be a grave oversight by someone at Monster and/or Nokia. If there is wireless charging please let me know. If there is no wireless charging, who do I have to...contact to make this happen.

Just for your info you've posted in the MacBook Pro forum area. I think you want the Mac Pro forum area here: http://discussions.apple.com/category.jspa?categoryID=194

Purity headphone

i live in peshawar. tell me where can i get these nokia purity headphones by monster

@SaadatHassan
It seems that stock is anticipated at this online retailer:http://www.mega.pk/headphones_products/6414/Nokia-Purity-Pro-HD-Stereo-Headset-by-Monster.html
Happy to have helped forum with a Support Ratio = 42.5

About the Purity HD Headset....

So. Are they good with Anna models? I have E7 and I would like to bought Nokia's Purity HD Headset by Monster. Do they give maximun power as they will do with Lumia models? Do they also work propely within computer? Advice is fully thanked!
Solved!
Go to Solution.

Purity Info
Click on the tab, More and you see all about it...
I am using Nokia AD-77 (mic & audio, voip adapter) for headsets when I want to use headset to a laptop.
More info here!
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

Nokia Purity HD Stereo Headset Need Audio Cable

Lost both audio cables for my yellow Nokia Purity HD Stereo Headset. Does anybody knows where can I get a new one? Wpold prefer the one with the volume control.
Thanks in advance.

Yes, my point exactly. Forgive me, I should have used the word common, instead of standard.
When you go to a store and want to buy a headset for your mobile, which "standard" are you most likely to see supported? Of all the headphones available today for mobile phones, what percentage of them support Apple vs OMTP? An not those $4.95 cheap things, I'm talking about a decent headset.
The headset that worked with my HTC Titan no longer worked with my 920, in fact after a great deal of searching I only found one decent headset that did, the above mentioned Nokia Purity. So what if it supports a new open standard that no one uses, how did that help me?
The worst thing about this headset is that they were cheap plastic with a terrible mic that suffers from too much wind noise - problems fixed in other manufacturers a long time ago - and because they were made by Monster, they were twice as expensive as they needed to be. I used them gingerly a handful of times and still they broke on me - which was expected.
So a year later, I want to move on and I am here to find out what I can move on too. Neither my Spyder True Voice or my NOCS work. I tried the converter route, didn't work. When I go to Amazon and type in OMTP or AHJ Headset nothing decent shows up. Now the only set that did work are discontinued - so back to my original question, what do I do now?

Nokia Purity Stereo In-Ear Headphones (Discontinue...

Hello,
What In-Ear Headphones now work with a Nokia 920? When I first got it, all of my iPhone compatable headsets didn't work so I had to get the Nokia ones. Now they are broken (even with VERY light use) - no surprise there - I am looking to replace them.
Nokia had their own (non) standard for headsets, so where can I go to find stuff that will work. I only need something so I can make phone calls, that sounds good and hopefully doesn't suffer from the sub-par noise that the Purity headset did.
Thanks

Yes, my point exactly. Forgive me, I should have used the word common, instead of standard.
When you go to a store and want to buy a headset for your mobile, which "standard" are you most likely to see supported? Of all the headphones available today for mobile phones, what percentage of them support Apple vs OMTP? An not those $4.95 cheap things, I'm talking about a decent headset.
The headset that worked with my HTC Titan no longer worked with my 920, in fact after a great deal of searching I only found one decent headset that did, the above mentioned Nokia Purity. So what if it supports a new open standard that no one uses, how did that help me?
The worst thing about this headset is that they were cheap plastic with a terrible mic that suffers from too much wind noise - problems fixed in other manufacturers a long time ago - and because they were made by Monster, they were twice as expensive as they needed to be. I used them gingerly a handful of times and still they broke on me - which was expected.
So a year later, I want to move on and I am here to find out what I can move on too. Neither my Spyder True Voice or my NOCS work. I tried the converter route, didn't work. When I go to Amazon and type in OMTP or AHJ Headset nothing decent shows up. Now the only set that did work are discontinued - so back to my original question, what do I do now?

Replacement Cable for Nokia Purity HD?

Is there any way to aquire a replacement cable for the Nokia Purity HD headphones? I've looked all over but couldn't find any exact answers. Are there any other cables that would be compatible?

These cables are for the Monster Insporation headphones so I can't promise they'll work, but they're the closet thing I could find for you.http://www.monsterproducts.com/headphones/headphoneslist.asp?custom=parts

Alteração dos layout's de impressão padrão do SAP B1

Pessoal, bom dia.
Gostaria de saber como faço para incluir um novo dado em um layout padrão do SAP B1, por exemplo: Fluxo de Caixa.
Toda vez que tento incluir ou alterar qualquer campo o layout traz informações que não tem nada a ver ou repete em todas as linhas.
Eu queria alterar por exemplo, no Fluxo de Caixa, que ele traga o Nome do PN e não o código do PN.
Agradeço desde já.
Abraços,
Antonio Melo

Danilo,
A questão é que os campos demonstrados no layout de impressão do fluxo de caixa não demonstram de quais tabelas sao os campos.
Criei um novo campo e o relacionei ao campo Código do PN. Ele me trouxe como resultado o nome do meu primeiro PN cadastrado no sistema para todas as linhas, ou seja, trouxe errado.
Continuo na mesma.
Abs,
Melo

Impressão de Cheques - Padrão Brasileiro - SAP Business One v. 8.8

Olá Experts!
O Layout de impressão de cheques default do SAP Business One 8.8 que está pré configurado no PLD imprime cheques nos padrões brasileiros? Ou tenho que customizar o PLD para imprimir os cheques?
Muito obrigado,
Ricardo Vieira

Resolvi o problema alterando o PLD dos cheques.

Impressão do DANFE quando em processo de contingencia

Boa tarde!
Estamos implementando a NFe em conjunto com o GRC NFe na versão do ERP 6.0 e SP 15.
Pesquisei todas as notas de correção do componente XX-CSC-BR-NFE que estão acima do SP e apliquei no ambiente de desenvolvimento. O objetivo é ter a instalação o mais atualizada possivel.
Ao gerar uma nota fiscal tanto por J1B1N quanto por uma transação de MM (no cenario desse cliente, os processos que geram as notas modelo 1/1A não estão no SD), o documento já é visualizado na J1BNFE aguardando a determinação do nro e envio a SEFAZ (configurei o flag callrfc com o valor 1).
O sistema esta enviando o documento para o GRC e fica aguardando o retorno. Ainda não estamos com o certificado digital definitivo e com isso não recebo o status de autorizado.
Até esse ponto conclui que o fluxo esta correto.
Agora começa o meu problema, uma vez que não tenho retorno, então decidi testar o fluxo da contingencia: se não recebo autorização então quero imprimir em fomulario de segurança.
Ja tentei todas as alternativas... mudei o status para contingencia, cancelei o documento e criei outro, tentei utilizar o docto que esta aguardando autorização.
Mas ate agora não encontrei uma forma de imprimir a nota ou o DANFE.
Alguem ja passou por essa situação? Como faço para imprimir o DANFE enquanto não autorização da SEFAZ? Tentei a J1B1N e recebo uma mensagem: "Problema com intervalo de numeração 01 e com objeto J_1BNFNUMB".
Ja procurei na documentação alguma informação que desse um fluxo de como executar a impressao ou como imprimir em contingencia ou como devo cancelar os documentos...
toda ajuda será benvinda
se alguem possuir algum procedimento pratico de como utilizar a NFe com o GRC NFe e puder passar seria de grande valia.
obrigada a todos
Márcia Verro

Bom dia!
Henrique,
posso resumir o fluxo a ser adotada para a geração da NFe assim:
1. A partir de uma transação no ERP é gerada uma nota fiscal e nesse caso só e criado o registro nas tabelas somente com o DOCNUM.
2. Atraves da J1BNFE visualizamos o documento criado e a partir dai geramos o nro da nota fiscal e enviamos ao SEFAZ correspondente. Nesse ponto se toda a configuração entre o ERP e o GRC NFe esta correta, o documento fica aguardando autorização.
3. Uma vez autorizada, o ERP ira receber automaticamente o retorno do GRC NFe e ai o DANFE pode ser impresso.
Podemos dizer que essa é uma perna do fluxo onde tudo esta normal e dentro dos tempos aceitaveis pelo negocio?
Se sim, ai vem uma das questões que ainda não consegui resolver: A impressão do DANFE é automatica? Se não for, qual é o procedimento? Utilizo a J1B3N e executo a impressão da mesma forma que executamos quando a nota é gerada pelo metodo convencional?
4. Agora se o sistema tem algum problema de retorno, e o negocio da empresa não permite esperar, devemos usar a alternativa de contingencia e imprimir em formulario de segurança, certo?
Nesse ponto, tenho mais essa questão que não consigo resolver:
Para imprimir em contingencia, é necessario mudar o status do documento?
Apos mudar o status, devo cancelar esse documento?
Para cancelar esse documento, tenho que usar sempre a opção que esta na J1BNFE - solicitar estorno? Esse processo funcionaria para documentos gerados com J1B1N (writer), por MM como MB1B ou por SD (fluxo de venda)
Ou existem procedimentos para cancelar NFe
5.Uma vez cancelada a NFe eu tenho que criar um outro documento similar. Esse documento deve estar atrelado a nota cancelada? Ou ficam independentes? Pelo que entendi, para usar a contingencia o segundo documento deve estar associado ao que foi cancelado para que o sistema entenda que é uma contingencia?
6. Ai faço a impressão via J1B3N
7. E qdo o sistema estiver disponivel novamente tenho que solicitar o cancelamento no SEFAZ da mesma
Esse é o fluxo da impressão normal caso a resposta seja dentro dos padroes e se for contigencia uso os passos do 4 a 7?
Para fechar o meu entendimento dos procedimentos: existe a obrigatoriedade de implementar os metodos da BADI CL-NFE_PRINT ou é opcional em cada projeto de NFE.
agradeço a atenção
Grata
Márcia Verro

Purity By Monster impressions

Similar Messages

Maybe you are looking for