Purple and green blotches with Nikon D700 raws

I'm getting some purple and green blotches (mostly purple) with Nikon D700 raws when using the "Camera Standard" profile. This happens a lot during sunset-ish shots. The problem goes away when I select the "Adobe Standard" the profile.
I just tried ACR 6.3 RC and the problem still exists. is this a known issue?
Would be happy to share a raw + screenshots if needed (currently on a relatively low bandwidth connection)
Thanks,
Kevin

Kevin, please try these:
http://forums.adobe.com/message/2681151

Similar Messages

Using IPOD 5g and camera connector with Nikon D70 raw

Hi,
I take pictures in 'RAW and Basic' ie digital negative and JPG on a D70. On the Apple IPOD camera connector page there is a user comment referring to having found a posting giving a correct way of transferring RAW files to IPOD which works. Obviously I am not expecting to be able to see the raw pictures just the basic jpgs. But does anyone know the correct procedure for transferring RAW and emedded basic PG files over to IPOD and where they are stored on the IPOD so that I can recover them later?
Dell Latitude D610 Windows XP

i have a minolta 7d and i used to take pics in raw+jpg figuring that it would save the raw and hopefully show the jpgs. no such luck. i talked to the apple gurus and no one seems to know how to make it look at the jpgs and not just the raw files.
i've played around with everything that i could figure out and to no avail. so now i just shoot in raw, tranfer to the ipod (via usb cord to the camera) and when i get home transfer them to the pc.
p.s. the jpgs are still moved over to the ipod and you can get them when you transfer them back to the puter you just can't view them while on the ipod. if you were to shoot just jpg then of course you would be able to see them.

Hi .. While working in PS it is freezing for a moment and wild purples and greens make large pixel patterns behind the program on the desk top. Any ideas ? Thanks.

Hi .. A never before seen problem for me .. While working in PS with large files , the program freezes for a moment and bright pixels of flourescent colors of purple and green fill parts of the background screen behind Photoshop. Its getting worse ? The programs are running extremely slow also. Thanks for any ideas.

You can't and don't have a PowerMac (G5).
Repairing Permissions, likely just waste of time.
REPAIR the HARD DRIVE instead.
Blowing dust around inside is a really bad idea. Or in the house.
http://support.apple.com/kb/TS1417

When I export a video in Premiere, the colors flash purple and green. Why?

I bought the software just recently but I have exported files before and they worked fine. I have a few speculations but I wanted to get an opinion. I dont know what to do if my speculations are right either.
1. I used a small digital camera so the format may be unsupported. It looks fine in the preview but when I set preview quality to maximum it flashes purple and green. I have, on the same timeline, a small logo animation I made using after effects and that part looks fine.
2. I used after effects to color correct the video segements and then exported them as .mov's. They look fine after they are exported. Maybe this is causing a problem though?
3. I noticed that I have been making the comps in after effects, 24 fps but when i looked at the settings in Premiere it says it is at 30 fps. But I didnt see another option there.
Are any of these the problem? Any advice or suggestions? What should I do to fix it/prevent it in the future?
Thank you!

>small digital camera so the format may be unsupported
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0

Why is everything purple and green?

Suddenly my computer is showing a lot of color in purple and green. Pictures even print out this way. I've repaired permissions and rebooted several times. I know it happened once shortly after rebuilding this system but the monitor was set to 256 colors. It's set to millions now and same problem. What's really weird is that it is affecting the pictures and how they print. This means it's not a monitor problem and I don't see how it could possibly be a video card prob. Any answers. I'm wanting to update to 10.4.3 but don't want to compound the problem.
Brad

Well this is a curious issue you have here. The fact it affects how things print, suggests Colorsync may be picking up on the color calibration of the display in the printer settings. Since I'm not sure how Colorsync goes about colormatching, you might want to make the question in the printing forum:
http://discussions.apple.com/forum.jspa?forumID=756

Vertical Purple and Green lines on start up!

Hi,
I was using Logic X (10.1) and all of a sudden my screen went totally grey and I could here a constant click on my headphones.
After about a minute my Mac restarted itself and on the startup screen displayed thick vertical purple and green lines.
Once it had finished loading up it then went on to a blank white screen and then stayed on this blank white.
I shut down my Mac the restarted it three times and have encountered the same problem every time.
Any help or advice as to what may have caused this and or how it could be fixed?
Thanks in advance.

Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3)

Nikon D700 RAW import shows only dotted boxes, not thumbnails

I am unable to see thumbnails of the RAW images on the memory card of my Nikon D700 when I import images into Aperture.
What I see during an import is a series of frames with a dashed or dotted border that represent the correct number of images on the card. I can select these boxes, but the selection is not indicated with any kind of highlighting, just with a number displayed on the import button. I can, however, import my selection, and once the images are imported, I can see thumbnails in the library.
If I shoot JPG images this is not a problem, only with the Nikon NEF files. I am using the Lossless Compressed format plus a normal quality jpg.
My look at other threads shows some people with D200s have been able to solve this, and they have mentioned fiddling with a USB setting on their camera. However, the D700 has no such setting.
Since Apple now supports the D700 in RAW mode, how can I get the thumbnails of the images in the camera's card to show up on screen during an import? It is a hassle not to be able to see which images I'm importing while I'm importing them.
Thanks!

Ibartram,
I am having the EXACT same problem as you. I have the new Olympus E520— which like the D700, was not suported by Aperutre until the recent upgrade. Like you I was happy to finally have my new camera supported by Aperture and like you, I cannot see thumbnails of my RAW images on my memory card when using the import function in Aperture.
As you have said: Everything is fine AFTER I import, but prior to import, when reading off my card, only empty dotted boxes.
Also, I cannot see the images in the finder either. Are you having this problem as well?
Do you connect your camera directly to Aperture or do you use a card reader? I use a card reader.
Please let me know if you find a solution to this problem. Or if there is any other information I can give you. It's not just a Nikon problem or a D700 problem. After reading your post my guess is that it's a problem with newer, previously unsupported cameras.
It's no good not being able to see which images I'm importing until after they're imported.

IPhoto compatibility with Nikon Compressed RAW files?

Hi,
Has anyone tried using iPhoto with the compressed RAW files generated by a Nikon D300s? Are they supported?
The 300s can create types of RAW files: 12- vs 14-bit and uncompressed vs lossless compressed. Which of these 4 types is/are supported by iPhoto?
Thanks,
Mike

Hi,
I looked into it a bit further, and apparently Apple does not support ANY TYPE of RAW file from the D300s! This is the camera that Nikon (who is not exactly a minor player in the digital camera market) describes as their "flagship" DSLR!
(Even more frustratingly, the D300s has the same sensor and image processor as the currently-supported D300, so the RAW file formats should be very similar and Apple shouldn't have to do too much work to add D300s support!)
On the other hand, Photoshop already supports it:
http://www.adobe.com/products/photoshop/cameraraw.html
EDIT: yes I know I should "submit feedback"... already done...
-Mike
Message was edited by: Mike G.

ACR 4.1 Issue - Lightroom Issue with Nikon D40x Raw Files

I am running Windows Vista and CS3 and am trying to process Nikon D40x raw files (NEFs) using ACR 4.1. The images come up properly in Bridge. However, when I try to add metadata using a metadata template, I get the error: "There was an error writing metadata to DSC_130.NEF." When I try to rotate an image in Bridge, I get the same error. If I try to do a Batch Rename, the name does not change. If I double-click on the image, it opens properly in ACR and the image can be rotated in ACR, and it then appears rotated in Bridge.
I also tried importing the D40x images in Lightroom. The following error appeared: "Problem Importing Files. The following files were not imported. The files appear to be unsupported or damaged."

Jeff,
I installed camera raw.8bi (size is 10,187kb)in
c:\Program Files\Common Files\Adobe\Plug-Ins\CS3\File Formats
I'm beginning to think this is a Windows Vista issue. I just installed ACR 4.1 on my XP laptop and it works fine. For both the Vista machine and the laptop, my raw files are on an external drive. If I move the raw files on the Vista machine from the external drive to the c: drive, there is no problem. I'm exploring whether there is some permissions issue in Vista that is not allowing me to write to the raw files if they are on an external drive. Ain't new operating systems just great fun!
Thanks!

Problem with NIKON D600 RAW files

I have had a new NIKON D600 for 6 months. The RAW files have worked well all this time. However, I recently took the camera in for repair. Upon its return the Adobe Essentials 11 catalague and editor no longer recognizes the RAW files created by the camera. However, those files are still recognized by the Nikon software ViewNX2. Since I use the Adobe program all the time for manipulating the files I need RAW access.
I called Nikon and they told me it must be an Adobe software problem. But the Adobe software recognized the files up the time of the camera repair.
What can I do about this?

Hi,
How do you get the images from the card to the PSE catalog?
There are known problems when using older version of the Nikon software to download the images. Have you tried updating the Nikon software?
The D600 needs ACR 7.3. You haven't recently re-installed PSE 11 and not done the updates have you?
What version of camera raw is installed (Editor -> Help -> About Plug-in -> Camera Raw)?
Can you still open the older D600 images that you took before the camera was repaired?
What operating system are you using?
Brian

Tethered shooting with Nikon D700

Hi all,
I am working on a hardware/software plan to streamline my digital photography workflow. I have been doing some research
on tethered shooting with Nikon and came across this blog post by Scott Kelby. My question is.....do I need to spend the 160.00 on
Nikon's 'Camera Control Pro 2' software on top of the 260.00 for Adobe's 'Lightroom 2' software in order to shoot tethered into Lightroom 2?
Can a person just shoot directly into Lightroom 2?
Are any of you out there shooting tethered into Lightroom 2? Can you expand on the details of your workflow?
Thanks in advance for any input.
Best,
Dennis

Hi
At this stage LR hasn't the ability to tether to a camera without additional software. this is a feature that has been asked for many times. I do not know of any other software that comes close to the functionality of Nikon CC Pro 2 for those on a PC. I use CC Pro 2 with LR 2.4 and a D2Xs and although it may take 5-6 seconds for an image to appear using a watched folder it is a wonderful way to shoot for specific situations such as low light panos or with clients wanting to view your work on-site.
CC Pro 2 allows you to work unobtrusively once you are set up and is particularly good for candids or photography in a public space as people are not put off by the photographer behind the camera. I would suggest a setup like Kelby's or McNally's which uses a Manfrottos accessory arm to place your laptop next to your camera as any other method is a pain if you are moving equipment around. In low light I would close the viewfinder to ensure stray light doesn't affect the exposure.
Regards
Michael

Purchased Imac May 2010. Now having issues as on disply tare 5 vertical sets of purple and green lines than screen fills up with square dotsm evenly space3d. Is my Imac repairable?

Purchased Imac May 2010. Display showing 5 sets of vertical lines colored green and purple. Than square spots appear equally spaced over entire screen. Is my Imac repairable?

Purchased Imac May 2010. Display showing 5 sets of vertical lines colored green and purple. Than square spots appear equally spaced over entire screen. Is my Imac repairable?

Photoshop CS6 Doesn't Work with Nikon D3200 Raw Files

I downloaded the trial version and it won't read these files.
So I downloaded the 7.1 Raw Plugin and I get the error message "Update Failed, Adobe Application Manager May Be Damaged..."
So I downloaded Application Manager and reinstalled it.
Still get the same error message.
Frustrating, I bought a new camera for production work, so many problems with Adobe software....

Uninstall your programs, run the Creative Suite Cleaner Tool, reinstall and try to update again.
Mylenium

Purple and green pixels on my display

So I have this collection of pixels near the bottom of my screen but they're only visible over a dark grey area, like when you're in the login screen (I have an early 2013 MBPr 15 btw)
It's probably a problem with the screen itself and not the GPU (or maybe the connection between them?) since if I take a screenshot it's not visible and I've connected it to an external monitor and it doesn't have it.
I took a picture of said problem https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xap1/t31.0-8/10498470_86776579 3251439_1883342093630891920_o.jpg
I've had this for a few weeks now and I've tried those youtube videos (I just to have some image retention after leaving something to run for a long time) which have decreased the amount of pixels. They all dissapeared for a few hours and now they're back. Anyone know what to do?
I can live with the problem since it's only on dark grey areas, but my laptop is still under warranty so if I really have to I might bring it to the store and look what they have to say about it. But I really need this computer to work on atm.

Based on the information that you have provided, the fault lies with the display. If it is under warranty, take it in and have it evaluated by the genius bar technician.
Ciao.

Aperture and EXIF information with EOS 300D RAW (.CRW) files

When I look at the EXIF metadata in Aperture, it shows some things completely wrong:
Shutter speeds over 1 second are shown as 1.0 seconds
The Serial number of the camera is totally wrong
There is no Exposure compensation
the Color Space is wrong (I use sRGB wich Aperture reports as Adobe RGB)
There are 8 pixels missing (see another thread)
There is no information about flash usage
Does anyone else have similar problems?
I am using a Canon EOS 300D (called Digital Rebel is the US)
Tomas Grönvall, Finland

may be a random question but are you using the
modified Firmware for Digital Rebels?
I'm using the original firmware (1.1.1) and Aperture 1.0.1

Purple and green blotches with Nikon D700 raws

Similar Messages

Maybe you are looking for