Purple cloud and highlight

I have some problem with Camera raw 4.6 beta and canon 50D.
The clouds turn purple when i decrease the exposure or the recovery.
Here a sample:
http://www.temporalite.com/forum/cloud.jpg
I do not have this issue with canon DPP.
I suppose this will fix in camera raw 4.6 final?
Thank you

The file:
http://www.temporalite.com/forum/_MG_0579.zip
I test others pictures came from the 50d; its not only cloud but all over exposed area With my Canon 20D these areas simply turn to gray when I decrease exposure.
P.s. sorry my English is not very good

Similar Messages

  • Satellite P10: white and purple clouds fading across the screen when booting

    I had been having problems with my SP-10 laptop so I bought a new hard drive (Fujitsu 60GB instead of standard 40GB) and fitted it myself. I was working fine with this for a long time until suddenly I had the strangest problem I have ever seen on a computer...
    Sometimes, when booting the laptop, instead of the normal red "TOSHIBA" screen and the Windows XP startup message, the laptop simply shows some weird white and purple clouds fading across the screen, eventually fading to a very dark but not quite black screen.
    I thought to begin with it was a problem with the DVD drive, as when it finally gave in and booted normally, the DVD drive was disabled. However, I have noticed in the BIOS, under "Advanced" that the InfraRed Port shows intermittently - it shows with the [Disabled] setting next to it, but will then disappear from the listing, then reappear again, and then go again and so on.
    Sometimes my computer will be operating normally, then completely lock up (mouse and all) and will reboot with the clouds!
    I have looked in the Windows Event Viewer for when the notebook has locked up and have seen something to do with an IRQ problem for the Infrared Port. I disabled the InfraRed port in Device Manager (I managed to enable it in the BIOS by loading standard BIOS settings) and restarted, but it started up with the clouds again, so I have a feeling the InfraRed port is the culprit - perhaps faulty hardware/loose connection as it is located quite close to the DVD drive and HD drive.
    I was just wondering if anyone has ever seen anything like this before on ANY computer, and if they knew how to resolve it? It seems completely illogical that a faulty IR port could alter what is displayed on the screen at bootup, unless of course there is something wrong with the boot sector of my HD?
    Any ideas?
    Thanks.
    Tom

    Well I can assure you my laptop has an InfraRed Port on it - I used to use it with my mobile phone for various things but don't bother now.
    Good idea about attaching another monitor - hadn't thought of that. I will see what I can come up with.
    I simply don't understand how anything except the display driver could be causing this, unless of course, another piece of hardware is conflicting with the display driver. But then why would it be intermittent and not constant? Anyway, I don't seem to have had the problem since I disabled the IR port (except the first time I disabled it) so here's hoping it's fixed.
    Will definitely try attaching another display though. Good thinking.
    Thanks,
    Tom

  • Can I do a duplicate search to delete on my ipod classic 120gb only?  There are no duplicates on my itunes... I think these duplicates arose when I did a restore, and had to reload from the cloud, and my computer backup.... please help...

    I have an ipod classic 120gb...
    Somehow I have managed to get mutiple duplicates.....
    I had a computer crash... and I restore several songs from the cloud, and from my computer backup from an external drive...
    and also, from past purchases on itunes...... some songs I had loaded from my own cd collection....and songs had overlapped......
    I knew I had duplicates before the crash and never took care of it.... but now of course there are more...
    I have taken care of the duplicates in itunes, by deleting them one by one..... I made the mistake of checking boxes then highlighting and doing a mass delete... thinking it would only delete my check boxes.... and loss a lot of music... so had to restore backups again....
    so.......
    Ipod......... how do I delete duplicates from the ipod, without loosing music from my ipod... I have lost music that is still there I believe on the Ipod that is not on my itunes... but I am not sure...and I can not find a search duplicates in itunes for Ipod....  can anyone help me on this... is there a way to do it, without going through 8 days of music line by line??
    Thank you

    Restore the iPod and reload it from the library... Ah, but there might be media on the device that isn't in the library yes?
    See Recover your iTunes library from your iPod or iOS device and a script called DeDuper which can help remove unwanted duplicates from iTunes if you end up needing to do a blanket recovery from the iPod. See this  thread for background on DeDuper.
    tt2

  • Text find and Highlight

    I have a textbox that I am loading text from instructionsArray that gets data from a XML file.  I want to search that textbox for a word that might be in the dictionaryArray that gets data from and XML file. Then I want the word if its there to be higlighted in red and be able to rollover  or click the word to get a popup that shows the words definition that is also in the dictionaryArray.    SO the code for all of this as I have it so far builds a rectangle backgournd and addes the textbox to it. The MA is a variable that tells what set of instuctions it is on (1, 2, etc).  Everything works except the search and highlight. Is this better?
    XML FILE
    CODE for XML Dictionary
    <?xml version="1.0" encoding="utf-8"?>
    <dictionary>
              <allWords>
                        <word>Enzymes</word>
                        <definition>Natural chemical substances found in all plant and animal tissue. In growing plants, they aid in all growth processes including maturation and ripening. After maturity, continued activity of enzymes can cause undesirable changes in color, flavor and texture. Enzymes that cause these undesirable changes are destroyed during heat processing of foods.</definition>
                        <visualAids>
                                  <image src="Flash_pictures/tn/tn_mouth.png" title="Mouth" url="Flash_pictures/mouth.png" />
                        </visualAids>
              </allWords>
              <allWords>
                        <word>Oxidation</word>
                        <definition>Gain in oxygen or loss of electrons. Acid Foods: Foods containing natural acids, those that had vinegar added to them or those produced by controlled microbial fermentation are classified as acid foods. This food group includes fruits, tomatoes, pickles, sauerkraut and relishes. Because microorganisms do not thrive in acid, these foods can be safely processed in a water bath canner at 212 F (100 C) </definition>
                        <visualAids>
                                  <image src="Flash_pictures/tn/tn_mouth.png" title="Mouth" url="Flash_pictures/mouth.png" />
                        </visualAids>
              </allWords>
    </dictionary>
    CODE FOR XML INSTRUCTIONS
    <?xml version="1.0" encoding="utf-8"?>
    <allInsturctions>
              <actInstructions>
                        <name>
                                  act1
                        </name>
                        <boxtext>
                                  Before tomatoes enter the plant, they must be graded for quality. The quality of the tomatoes on a truckload determines how much the producer gets paid. Only grade A/B tomatoes will be used in canning. Grade C tomatoes may be used for other types of tomato food products such as juice or salsa.
                        </boxtext>
                        <instructions>
                                  <![CDATA[ Tomato Grading
    <p>Enzymes The quality grade of a tomato is based on 3 things: size, ripeness and defects. This step is only an average of the quality for the whole truck so the producer can be fairly paid. Later, every tomato will be graded both by machine and by hand before being processed.
    <p>Minimum quality requirements must be met to continue processing or you risk the final canned product getting recalled by the USDA. The estimated Grade quality for the truck is not sufficient enough. Each tomato is graded for redness by a machine where tomatoes that are too green are siphoned off for juice production. Tomatoes are also evaluated by hand so that any broken fruit can be discarded. Broken fruit will jam up the machinery and not peel properly.</p>
    <p> Now it is your turn to practice grading tomatoes in order to determine how much to pay the producer!
    1.          Take a sample of tomatoes from 3 different spots in the truckload. <br/>2.          Give each separate sample a grade of A/B, or C. <br/>3.          Then average the 3 samples together to determine how much to pay you producer and decide what finished product to use the tomatoes for.
    </p>
    ]]>
                        </instructions>
                        <question>
                                  <![CDATA[<br/> <br/> <br/> How would you grade this truck?</p>]]>
                        </question>
                        <options>
                                  <a>Grade A</a>
                                  <b>Grade B</b>
                                  <c>Grade C</c>
                        </options>
                        <image src="Flash_pictures/tn/tn_mouth.png" title="Mouth" url="Flash_pictures/mouth.png" />
                        <video>
                                  Arrival
                        </video>
              </actInstructions>
    </allInsturctions>
    //LOAD EXTERNAL XML FILES
    function loadXML():void
              XMLLoader.addEventListener(Event.COMPLETE, xmlLoadComplete);
              XMLDataRequest = new URLRequest(XMLFiles[XMLFilesPointer]);
              XMLLoader.load(XMLDataRequest);
              trace(XMLFiles[XMLFilesPointer]);
    function xmlLoadComplete(e:Event):void
              XMLLoader.removeEventListener(Event.COMPLETE, xmlLoadComplete);
              var xmlData = XML(e.target.data);
              //distinguish between both xml types
              xmlData.ignoreWhitespace = true;
              if (xmlData.actInstructions != undefined)
              {//if instructions node exists, then it is instructions xml
                        trace('instructions xml file');
                        for (var b = 0; b < xmlData.actInstructions.length(); b++)
                                  instructionsArray.push({name:xmlData.actInstructions[b].name.text(), boxtext:xmlData.actInstructions[b].boxtext.text(), instructions: xmlData.actInstructions[b].instructions.text(), question: xmlData.actInstructions[b].question.text(), image: xmlData.actInstructions[b].visualAids.text(), video: xmlData.actInstructions[b].video.text() });
              if (xmlData.allWords != undefined)
              {//if movie node exists, then it is dictionary xml
                        trace('dictionary xml file');
                        trace(xmlData.allWords.length());
                        for (var n = 0; n < xmlData.allWords.length(); n++)
                                  dictionaryArray.push({word: xmlData.allWords[n].word.text(), definition: xmlData.allWords[n].definition.text(), image: xmlData.allWords[n].visualAids.text() });
              XMLFilesPointer++;
              if (XMLFilesPointer < XMLFiles.length)
                        loadXML();
    //build display and add text
    var words:Array = instructionsArray[MA].instructions.split(/\s+/);
    var highlight:TextFormat = new TextFormat("Arial",14,0xff0000,null,true);
    var dictionaryTimer:Timer = new Timer(100,dictionaryArray.length-1);
    dictionaryTimer.addEventListener(TimerEvent.TIMER, onTimer);
    dictionaryTimer.start();
    function onTimer(e:TimerEvent):void
              textbox.setTextFormat(textbox.defaultTextFormat);
              var re:RegExp = new RegExp("\\b"+words[dictionaryTimer.currentCount]+"\\b", "gi");
              var result:Object = re.exec(instructionsArray[MA].instructions);
              while (result)
                        textbox.setTextFormat(highlight, result.index, result.index+words[dictionaryTimer.currentCount].length);
                        result = re.exec(instructionsArray[MA].instructions);
    instructionsFormat.font = tomatoBasefont.fontName;
                                  instructionsFormat.size = 14;
                                  textbox.defaultTextFormat = instructionsFormat;
                                  textbox.multiline = true;
                                  textbox.htmlText = instructionsArray[MA].instructions;
                                  textbox.width = 778;
                                  textbox.height = 340;
                                  //Testing Dictionary Search START
                                  //Search instructions for words in dictionaryArray
                                  dictionaryTimer.addEventListener(TimerEvent.TIMER, onTimer);
                                  dictionaryTimer.start();
                                  //Testing Dictionary Search END
                                  i_MC.x = 180;
                                  i_MC.y = 160;
                                  i_MC.name = "instructionBox";
                                  // Shadow Gray color;
                                  qbkg_shadow.graphics.beginFill(shadowColor);
                                  // x, y, width, height, ellipseW, ellipseH;
                                  qbkg_shadow.graphics.drawRoundRect(10, 10, 788, 351, 20, 20);
                                  qbkg_shadow.graphics.endFill();
                                  // Purple Box color;
                                  qbkg.graphics.beginFill(boxColor);
                                  // x, y, width, height, ellipseW, ellipseH;
                                  qbkg.graphics.drawRoundRect(0, 0, 788, 351, 20, 20);
                                  qbkg.graphics.endFill();
                                  xClose.addEventListener(MouseEvent.MOUSE_DOWN, mouseClickHandler);
                                  xClose.x = 750;
                                  xClose.y = 2;
                                  i_MC.addChild(qbkg_shadow);
                                  i_MC.addChild(qbkg);
                                  i_MC.addChild(textbox);
                                  i_MC.addChild(xClose);
                                  addChild(i_MC);

    And here is a "workable solution" - an example of how to deal with it.
    This class creates roll overs and tooltips for the search term.
    A lot of this code is based on what we discussed before - nothing really new.
    Just place this class in to FLA directory and make this class a Document Class in Flash IDE. I don't like Flash IDE and coding on the timeline - so it is up to you to translate it into  timeline code. Some aspects are commented in the code.
    package
              import flash.display.Sprite;
              import flash.events.MouseEvent;
              import flash.geom.Rectangle;
              import flash.text.TextField;
              import flash.text.TextFormat;
              public class TextRollOverExample extends Sprite
                        private var highlight:TextFormat = new TextFormat("Arial", 14, 0xff0000, null, true, true);
                        private var originalText:String;
                        private var tf:TextField;
                        private var inputField:TextField;
                        private var termBoundaries:Vector.<Rectangle>;
                        private var _searchTerm:String;
                        private var tipText:TextField;
                        public function TextRollOverExample()
                                  init();
                        private function init():void
                                  originalText = "I have a textfield that I am reading the content in from a XML file.  Is there a way to search said textfield for a certain word from an Array?  For Ex.  if I have a paragraph of text in the textfield and I want to search the textfield for a word that is in an array like 'The' and underline every instance of the word can I do that?";
                                  tf = new TextField();
                                  tf.defaultTextFormat = new TextFormat("Arial", 12);
                                  tf.multiline = tf.wordWrap = true;
                                  tf.width = 300;
                                  tf.autoSize = "left";
                                  tf.text = originalText;
                                  tf.x = tf.y = 50;
                                  addChild(tf);
                                  searchTerm = "textfield";
                        private function set searchTerm(term:String):void
                                  _searchTerm = term;
                                  tf.setTextFormat(tf.defaultTextFormat);
                                  var re:RegExp = new RegExp(term, "gi");
                                  var result:Object = re.exec(originalText);
                                  termBoundaries = new Vector.<Rectangle>();
                                  while (result)
                                            tf.setTextFormat(highlight, result.index, result.index + term.length);
                                            // get term boundaries and push them into collection of all related boundaries
                                            termBoundaries.push(tf.getCharBoundaries(result.index).union(tf.getCharBoundaries(result.index + term.length)));
                                            result = re.exec(originalText);
                                  drawHotSpots();
                        private function drawHotSpots():void
                                  // create hot spots for all
                                  for each (var rect:Rectangle in termBoundaries)
                                            hotSpot = rect;
                        private function set hotSpot(rect:Rectangle):void
                                  var s:Sprite = new Sprite();
                                  s.buttonMode = s.useHandCursor = true;
                                  s.addEventListener(MouseEvent.MOUSE_OVER, onHotSpotInteraction);
                                  s.addEventListener(MouseEvent.MOUSE_OUT, onHotSpotInteraction);
                                  s.graphics.beginFill(0xff0000, 0);
                                  s.graphics.drawRect(0, 0, rect.width, rect.height);
                                  addChild(s);
                                  // position hotspot over corresponding word
                                  s.x = tf.x + rect.x;
                                  s.y = tf.y + rect.y;
                        private function onHotSpotInteraction(e:MouseEvent):void
                                  switch (e.type)
                                            case MouseEvent.MOUSE_OVER:
                                                      drawTooltip(_searchTerm, Sprite(e.currentTarget));
                                                      break;
                                            case MouseEvent.MOUSE_OUT:
                                                      killToolTip();
                                                      break;
                        private function drawTooltip(term:String, target:Sprite):void
                                  killToolTip();
                                  tipText = new TextField();
                                  tipText.defaultTextFormat = new TextFormat("Arial", 11, 0x008000);
                                  tipText.width = 100;
                                  tipText.border = true;
                                  tipText.background = true;
                                  tipText.borderColor = 0x808080;
                                  tipText.autoSize = "left";
                                  tipText.multiline = tipText.wordWrap = true;
                                  tipText.text = "This thingy describes what " + term + " is.";
                                  addChild(tipText);
                                  tipText.x = target.x;
                                  tipText.y = target.y + target.height + 2;
                        private function killToolTip():void
                                  if (tipText)
                                            if (this.contains(tipText))
                                                      removeChild(tipText);
                                            tipText = null;

  • Ok Apple users...Is there a way to delete e-mails on my Mac and not have to delete the same e-mails on my iPhone, and iPad...and vise-versa. I have the Cloud, and thought that everything would sync all of the time. If you know of a setting I need to adjus

    Ok Apple users...Is there a way to delete e-mails on my Mac and not have to delete the same e-mails on my iPhone, and iPad...and vise-versa. I have the Cloud, and thought that everything would sync all of the time. If you know of a setting I need to adjust, please let me know.

    Are you referring to @mac.com, @me.com or @icloud.com emails? Or some other email providers emails?
    If the former, it should do that automatically. If the latter, no. iCloud does not (nor is it supposed to) sync non-Apple provided emails.

  • Adobe creative cloud and CS6 Illustrator download was a disaster

    After downloading Adobe creative cloud and CS6 Illustrator my system wwent into crash mode with one error after another. Had no less than 4 blue screens of death (BSOD) and I had to do restore but lost most of my files and cannnot get them back. What say you? I unistalled any leftover CC and CS6 illustrator thereafter.

    We can't know. You have not provided any relevant technical info like system specs and the actual crash logs. just saying that it crashes is pretty useless.
    Mylenium

  • Adobe Creative Cloud and Adobe Creative Suite: New Choices for Customers

    Adobe has announced the new Cloud-based model for software distribution, along with new terms for boxed product upgrade eligibility. Beginning with the CS6 releases, when they happen, upgrade pricing on boxed products will only be availble one generation back. There is a limited window to upgrade now to the current versions at a discount.
    See http://blogs.adobe.com/conversations/2011/11/adobe-creative-cloud-and-adobe-creative-suite -new-choices-for-customers.html

    Eugene:
      Based on the current information we have (from the blog post), which may not be correct and which you should not rely upon:
    There is some confusion about the word "discount." As used in the blog post, in general there are no "discounts" for upgrades, there is the upgrade price and there is full price. But, also in the blog post, there is a special "discount upgrade" if you choose to upgrade to CS5.5 today (prior to Dec. 31, 2011), which is 20% off the regular upgrade. However, Peter used the word "discount" to distinguish between upgrade pricing and full price. It's probably a good idea to avoid using that word there because of the potential for confusion.
    I have CS5 InDesign in work. So I will be able to upgrade that to CS6 when it comes out at the discount price?
    You will be able to upgrade to CS6 at upgrade pricing. Not the 20% discount, but it is "discounted" from the full price of CS6.
    I'm still using CS2 Illustrator and Photoshop, for the little work I do in those programs, they're fine. But if I want to upgrade them to CS6 I have to pay the full amount of an upgrade, with no discount... or will I have to pay for CS6 in full for both of these programs?
    You will have to pay the full price (not the "full amount of an upgrade," whatever that means).
    If you elect to upgrade to CS5.5 prior to Dec. 31 of this year, however, then then you can pay the discounted upgrade price to upgrade to CS5.5 (well, CS5 since Photoshop CS5.5 doesn't exist), and then you can pay the CS6 upgrade price in March/April. So you can pay for no upgrades (full price) or two upgrades (one of which is 20% off).
    At the moment I can upgrade CS2, photoshop and Illustrator for €240 each, to CS5. So wouldn't I just be able to do that now and then buy the CS6 upgrade at a much later date perhaps just before CS7 comes out?
    Yes, you can do that.
    If CS6 has the tools to basically go "File>Export>Epub" and I get a fully working epub file without having to trash about in code afterwards or make complex tagging in InDesign, then I'll be buying it.
    It looks like EPUB is evolving pretty fast, so even if ID CS6 fully supports what you want out of EPUB on Day 1, I bet you'll need to be prepared to postprocess it on Day 2. Or at least long before Day 200.

  • Just purchased Adobe Creative Cloud and InDesign says start trial?

    Hello,
    I've just purchased the full package of Creative Cloud and just tried to install InDesign and now it says 'Start Trial' next to it in the Creative Cloud Menu?
    When I launch the InDesign it says Sign In required and then it takes me to a serial number screen?
    Help!!!

    Aeroalex please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html to resolve the connection error preventing your membership from being authorized.

  • I am using creative cloud and it does not sync between my two computers

    I have two macs running Adobe Creative Cloud services. However, when I save files to my creative cloud from either computer they are not available on the other computer when accessing the creative cloud . They don't sync instantly like Dropbox- which I am hoping to replace with Creative Cloud. Is there a solution? Again I am wanting to upload files from either computer to Creative Cloud and have them instantly available.
    Thank you,
    Dave

    Ok. Never mind. I figured it out.

  • Adobe Cloud and CS6 extended trial.

    I bought CS6 recently and it is registered in my name.  For some reason I found myself on a trial of Adobe Cloud and CS6 extended which I do not want.  The trial has finished but when I try quitting it, it will not allow me to use my CS6.  How do I get round this problem?

    Hi Livlah-T,
    Everything looked normal with your account but it didn't appear you had completed the 30 day license check.
    My recommendation would be
    - Launch Adobe Application Manager from either the Start menu (Windows) or Applications folder (Mac) and install all available product updates.
    - Once this is complete launch whatever product was showing up as a trial and click the "License this software" and sign in with your Adobe ID.
    If the next time you launch the product it is still coming up as a trial, you might try creating a new administrator account and going through the "License this software" process again
    Windows 7  - http://windows.microsoft.com/en-IN/windows7/Create-a-user-account
    http://social.technet.microsoft.com/wiki/contents/articles/create-a-new-user-account-in-wi ndows-7.aspx
    Windows 8  - http://windows.microsoft.com/en-IN/windows-8/create-user-account
    10.7 - http://support.apple.com/kb/PH4600
    10.8 - http://support.apple.com/kb/PH11468
    and double-check nothing is interfering with the 30 day license check process
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Ensure you can reach
    https://lm.licenses.adobe.com
    and nothing is blocking access such as the hosts file or firewall software
    Hope that helps,
    -Dave

  • With my iPhone 5s, can I record long voice memo to the cloud and not worry about storage on phone?

    With my iPhone 5s, can I record a long voice memo to the cloud and not worry about storage space on phone?

    You can't add music to the cloud, whether it will show there for streaming and redownloading depends upon what country that you are in. If you are in a country where music is available in the cloud then you don't have to download the music from the store, if you turn Settings > iTunes & App Store > Music (under the 'show all' heading) 'on' then you should be able to stream purchased music in the Music app without downloading it - your phone will need to be online in order to stream, and if using 3G/4G then it will use some of your data allowance.
    If you download an album or a track then it will be downloaded onto your phone. You can't upload music to the cloud from an iOS device. Whether music that you've bought shows for streaming depends upon what country that you are in and if the album or track remains in the store (unless you've subscribed to iTunes Match), and if you are connected to a network.

  • Deployment of Adobe XI Pro Cloud and Adobe XI Pro Non-Cloud

    Hello - If you have Acrobat XI Pro Cloud and Acrobat XI Pro Non-Cloud deployed in a large environment where both products were packaged with the Adobe Application packager at separate times, how does one systematically determine or report on which version is which (file version, registry path, exes, product ID, etc). As best I can tell they are literally exactly the same.
    Here's the scenario, I am rolling out Adobe XI Pro Cloud globally to many computers, a good portion of our computers already have Adobe XI Pro non-cloud version. Typically I run a report on ProductID, RegistryKey, or FileVersion to isolate the correct product that needs to be deployed. In this case, they report exactly the same. What is the best mechanism to report on to separate the two?
    Is there a file\folder\registry key that would exist only for an Adobe XI Pro Cloud-Edition installation?
    (Note: most of these systems will also have the Cloud version of Illustrator & Photoshop installed, which needs to remain intact, looking for CC folders doesn’t indicate specifically which Acrobat version they have in that case)
    Thank you,
                Tony

    This may help: http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/troubleshoot.html#software-ta gs
    Ben

  • ITunes erased my library to force me to subscribe to Cloud, and Cloud wiped out my iPad twice.  Anyone w/same prob?

    iTunes took back my entire library to force me to subscribe to Cloud, but now it will not re-download all of my purchases, and the Cloud also seems to want to wipe my iPad (has done it twice). 2 hours on the phone with Apple no help. Anyone w/same prob?

    I guess I should have been more clear. One morning (5 days ago now) we realized that our complete itunes library was gone--all media (music, shows, movies, podcasts) was gone and could not be located on our hard drive. When I went onto itunes under the "help" section there was a comment that you could upgrade your itunes to Cloud and then access all your purchases and either re-download them or play them from the itunes page. So, I upgraded itunes and went about accessing all my purchases(thousands of dollars worth of media--so you can imagine my stress). Meanwhile, my husband was at work with his ipad and realized that everything was gone--all his apps, music, even apps for work that were downloaded at his work. Completely gone. I told him that I had found everything on Cloud and that he could probably just re-download everything when he got home but we both agreed it was weird. When he got home he noted that only about 1/3rd of our purchases were available on the Cloud website--all of my son's shows were still not there and many albums that we had bought over the last year were still missing. My husband called Apple yesterday and spent two hours on the phone with them. He said it was all very mysterious as they would not admit or deny anything and he said that he spoke with several people that were very ambiguous about what had happened and were careful about what they said. They agreed to re-release to us all of the media that we could not access on Cloud, but that they could not provide us with media that had copyright expired. They basically said it was our fault for not backing everything up on a separate system. While we explained that we do have a back up hard drive, we don't back up every time we make a purchase--so we haven't done so for several months. Then, this morning my husband was on his ipad and a message popped up that froze the ipad and it said that he needed to sync into itunes. He did so and then when he went back to unplug to go to work he realized everything was gone again! All his apps, music, everything. He was so upset because he saw no reason why this keeps happening.....Any thoughts??

  • Normally when I go to a website the site automatically opens, now with the updated Firefox I have to go to the http: line and highlight and turn arrow to red. Why?

    The website shows on the bottom line with other websites visited, but will not open automatically, I have to go up to the mozilla.com toolbar and highlight the website and then go to the arrow and highlight it so that it turns red. Uses a lot of extra time.

    You may have a user agent that is corrupted.
    *http://browserspy.dk/useragent.php
    See also:
    *https://support.mozilla.org/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser

  • When I tried to update my iPhone 5s to iOS 8.1, I was forced to choose to restore or back up.  Back up wasn't working so I had no choice but to restore.  I lost pictures over the last two years.  Cloud and iTunes backup are not working for me.  Help!

    How can I retrieve photos when it says my cloud and iTunes backups are empty or not backed up?
    When I tried to update my iPhone 5s to iOS 8.1, I was forced to choose to restore or back up.  Back up wasn't working so I had no choice but to restore.  I lost pictures over the last two years.  When I tried my cloud, there was nothing.  I would get notifications that my cloud was full, but I thought there would at least be some photos in there.  When I tried to restore a back up, it said the last time was two years ago.  I thought when you're on wifi, it automatically backs up.  I've charged my iPhone into my Macbook a bunch of times, so something should have backed up.  Is there any hope for my photos?

    Sorry no backup - no pictures.
    Yes phone will automatically backup to icloud when on wifi and phone is charge, but your phone storage was full so it stop backing up.
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    iCloud: iCloud storage and backup overview
    When your phone was connected to your computer, you should've seen an autoplay which would've allowed you to import your pics to your computer as you would a digital camera Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

Maybe you are looking for