Purple line across photo images

I recently got an iPhone 3GS, which unfortunatley I had to replace (dust under screen).
Now I have noticed on my new one, that whenever I take a picture (doesn't matter if its through an app or the normal camera) or even a video, I have this horrible purple line across my pictures, which then saves onto the picture. Am I going to need to get another replacement? Is it a common problem? I tried to Google it but I couldn't find any information about it.
Example:
http://i2.photobucket.com/albums/y3/DuncanJF/IMG_0080.jpg
Thanks.

Yes, unfortunately it sounds like another hardware issue...
You can certainly try to hard reset and then full restore using "set up as new iPhone" ... but I doubt this will help... if it doesn't resolve then software is not the root cause for your issue... thus another replacement is needed sorry!!

Similar Messages

  • I scanned an old image using my Epson NX515 printer, used GIMP to make some minor repairs on the image and printed it out.  I noticed there were a number of evenly spaced thin blue lines across the image, approximately six of them.

    I scanned an old image using my Epson NX515 printer, used GIMP to make some minor repairs on the image and printed it out.  I noticed there were a number of evenly spaced thin blue lines across the image, approximately six of them. I opened & printed the image on my PC using PAINT.NET.  No lines appeared. I sent the image to my daughter. She printed it and found no lines. I printed the image using Seahorse on my Mac and the lines still appeared. I used basically the same print settings on Mac and PC.

    maahes wrote:
    did so now, only now I'm getting a slightly different error: could not find udevd no such file or directory. I checked both grub.cfg's and my mkinitcpio.conf and there's no listing for udevd ....which I've never heard of, so I assumed it was a typo?
    For clarification: udev is in the mkinitcpio.
    I'm not sure whether I yet have a good intuition for how you have your machine set up, but I suspect you need to include a cryptdevice flag to the kernel in your grub config. The file isn't found because the kernel doesn't know your root directory needs decrypting first.
    My setup is an LVM over LUKS over LVM sandwich. To boot into my system, the grub.cfg contains the line:
    linux /vmlinuz-linux root=/dev/mapper/cryptvg-root cryptdevice=/dev/mapper/vg-crypt:root rootfstype=ext4 pcie_aspm=force acpi_osi=Linux acpi_backlight=vendor i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 ro
    Now, most of those flags don't have anything to do with your problem, but note the cryptdevice. It tells the kernel it's dealing with an encrypted filesystem sitting in a logical volume called crypt on a volume group called vg. The bit after the colon tells the kernel to associate this encrypted filesystem with /dev/mapper/root.
    As for how to fix your system, I'm afraid I still feel a bit fuzzy about how your LVM and encrypted layers relate to each other, whether you have LVM over LUKS, or LUKS over LVM, or something else. Was there a particular how-to that you followed?

  • Getting lines across photos

    Why am I getting lines across large photos that I print within Photoshop Elements 11?

    Update you printer drivers.
    Try to take the print out from the other applcation and check is it the smae behaviour or not.
    Also, in Editor Go to File >Print and in the Print dialog.
    Click on More option, and Under 'Color management' section select  'Printer manages color' for 'Color handling' drop down.
    -Harshit yadav

  • Purple lines around an image icon

    Hi all!
    Ive created some JButtons with a white background which have some ImageIcon's representing their use. Problem is a horrible purple border appears around the most recently selected image/text combination in the middle of the button. I've looked in the API's but to no avail! Does anyone know how i might go about removing this unsightly smudge on my cutting-edge designer GUI?? ;0)
    Many thanks

    Maybe you should try the method setFocusPainted(boolean)
    inherited from class AbstractButton.

  • Blue Line on imported images

    Hi there
    Anyone know why FCPX has added a blue line across imported images and music?  How do I get rid of it?  The line does not display in the viewer though.
    Thanks
    Carl

    Hi Tom
    Thank you for the information. I don't recall checking the keyword option. Can this be undone? Also what is the best way to import several photos? Does importing the folder create issues?
    Carl

  • Has anyone else has seen this problem with their iPod touch 5th Generation with iOS 7.0.4. My screen started making flashing white lines across the screen, then went dim, then pixeled with purples

    The ipod will show flashing white lines across the screen, going down, it then does somthing where the screen will dim down but its not like when the backlight goes on and its about to lock. It dims the background of your ipod and the icons and letters kind of all look defined. Then the ipod gets all pixelized and it has big boxes on pixels and its all differnt colors like purples and greens, red, etc. then it turns right off and restarts itself less than 5 seconds later. These things happen really fast but when it does it's really weird. It first happened 3 times in a row, Its still continuing to happen but i can manually turn off my ipod by holding the lock button down and not even 30 seconds later it's like its possessed and it turns on by itself. I talked to somone on appel and they told me to back it up and restore it. I restored it and as soon as the process ended and tuirned on like a brand new ipod and like clockwork the glitch happened instantly. It did it a couple of times throughout the night and i kept having to watch it so i can keep turning it off manually because it continues to turn on by itself. I talked to 3 different people on Apple Support and they couldnt even find an answer for me. It's so weird.

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              
    Also,
    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign?

    I need to create 4 @ A2 boards that print adjacent to one another (all landscape format) with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards? Is it best to use Illustrator(CS3) or Indesign?
    Thanks.

    Re: I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign
    If possible, please try Indesign CS 4.

  • TS3274 My Ipad display screen is coming up with blue background and pink/purple lines all across the screen. It's also blurry and difficult to see icons on home screen and when apps are opened up. Has anyone had a similar problem?

    The display screen on my Ipad is coming up all blurred with blue background mixed with pink and purple lines. It's difficult to see icons but apps are still accessible. Colors are off and images are very unclear on apps and home screen.
    Has anyone had this problem or any advice on troubleshooting?
    Thanks.

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    But it could also be a hardware failure. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • Grouping Images - purple lines

    I have to create an image with multiple images together. I have alligned all the images, but when I pre-view the purple grouping lines appear. I need them to not be visible, ideas?

    How did you preview? I think you previewed one slide, which is not a real preview because no SWF is generated. Do you see the purple lines also when using one of the real previews: Project, from this slide, next 5 slides, preview in Browser?
    Lilybiri

  • There were frequent purple line appear on photo taken with my iPhone 5 camera, is this the defect of product?

    there were frequent purple line appear on photo taken with my iPhone 5 camera, is this the defect of product?

    So it looks like I ran out of AppleCare two weeks ago, what a shame. I guess it's not worth $260 to receive a new handset simply for a dusty camera. However this is still annoying due to the fact that the phone shouldn't have dust behind the lens anyway. I think this situation is a bit unfair since this is a malfuntion of hardware and it is also disappointing that so many people have this problem with the iPhone 5 in particular. :X
    Thanks for your help though Templeton!

  • On my Iphone 4 S photos are showing purple line

    Hi,
    On my iphone4s when i click on Photo app few of the photos are showing purple lines and when i open that photo it is showing as normal.
    can you please suggest what might be the issue here.
    Thanks

    To make a ringtone you need your <30 second clip in AAC (.m4a) format on your computer, you then change the extension to .m4r and drop the resulting file into the Automatically add to iTunes folder for it to get added to iTunes as a Tone. Sync your tones to the device and then you can select them using Settings > Sounds.
    tt2

  • Yellow lines across my printed photo

    I am getting lines across my printed photo using my PSV2400 and Vista. I assume I may be running out of ink but I don't know if it is my color cartridge or black cartridge. I am running Vista and I do not have the utility installed that will tell me approximately how much ink I have left. My CD says it will work on all windows operating systems up to XP. Is there some place I can download the Print Manager utility, for Vista that will help me out on my ink usage?
    Thanks for the help and Happy New Year

    what makes you say it's the mac? sounds like you have a screw loose somewhere in the printer.
    clean the heads and try printing on a different type of paper or try setting the type of paper in your print setup before you print.

  • Why is my MacBook Pro slowe when I open it off line to view photo images?

    I had recently activated iCloud. I have it set not to copy my photos or data, but only settings and a few other categories. I opened it offline in Preview to quickly view photos on memory cards. I found it slow, with a drop down box periodically flashing open from  the top of the screen. It appears to be attempting to copy or save my images. I presume this is to iCloud, though I have it specifically unchecked and do not want it saved to iCloud. I have Dropbox, which I quit, so it is not a factor. I never save my photo images there either. In the past, it was never problem to open and view images with Preview. Now it is extremely slow to open and load images for contact sheet view. All this is recent with the addition of Mavericks and iCloud. Also, I attempted to get  out of this by quitting, but had to resort to a forced quit, as it continued to do what it was doing.
    Is there a way to be sure iCloud is not copying things and slowing down my computer? Is this a glitch caused by Mavericks?
    I have done scans with Sophos Antivirus and it does not appear I have any virus. I have lost all the speed of having a Mac. It is now slower than my old dual core Acer PC. I recently added a Caldigit Thunderbolt dock which has worked great to add USB 3.0 to  my early 2011 MacBook Pro which had not 3.0 ability, but this
    was bypassed, as my card reader is only 2.0. Any help would be appreciated. Thanks.
    <Edited by Host>

    I think I have found the source of my problem detailed above. Apparently, there have been problems with Preview running on OS Mavericks, dating back to October 2013, which Apple has yet to acknowledge or address. Many have had similar problems with photo images loading very slowly to the point of making Preview unuseable.
    It may also explain problems I have had with flash drives and hard drives that ran on my Mac Book Pro under Lion no longer working  since upgrading to Mavericks. I found other postings on these issues.
    It is a shame that I have to resort to Google as the best source to identify problems with my Mac and possible solutions. In many cases, it directs me to the source on Apple Support, which is difficult to find when one attempts a search via Apple Support. This could use some improvement.
    I am new to using community support sites and Apple does not seem  to provide simple, clear directions  on how to get started. Jumping in with both feet, not only did I get wet, but I apparently "splashed" someone, as I got a hostile response from another community member on the first issue ever posted. I never did get an answer to the problem, though. I hope some find these comments helpful.
    Oh, and wake up, Apple. We all would hope you monitor and glean information from these postings and act promptly to remedy problems with OS Mavericks.
    Message was edited by: MikeMacBP2011

  • Dark "scan lines" across finished movie frame

    I'm trying to put together a movie from still photos and recorded audio. It needs to be output in 1024x780 pixel format to match the projector used at a multimedia show. All the images were taken with a 8 megapixel digital camera, and I have used PhotoShop to format them as 1024x780 prior to dropping them into iMovie. Everything looks good in the iMovie timeline editor, however when I compress the finished movie using Expert Settings into the final format, I get thin horizontal black lines across the frame that breaks the image into many thin horizontal bands. I've tried switching to other codecs to see if I can make the problem go away, but anything that can produce the finished movie in something other than standard video format causes the same problem. The only thing that seems to work is letting the program make the movie in standard video format, such as making a .avi file instead of a .mov or a .mp4 out of it, but then I don't have a full-frame image for the projector at the show, which is necessary.
    The show producer says this is a generic Mac iMovie issue and he wants me to switch to PhotoPro on an Windows XP machine. Surely this isn't true and there is a fix to this problem.
    Ideas anyone?

    Eep, I'm so sorry, I just realised I posted this in the wrong forum.. I don't know how that happened o_o
    I'm actually using Adobe Premiere Elements 9 - Is there any way to move this thread or should I just make a new one?  I suppose the questions are still relevant though?
    I'm using Procaster from livestream.com to capture videos
    With G-Spot:
    The source file doesn't have these lines though
    I have no idea how to find the sequence settings but maybe that's because it's a Pro thing rather than an Elements thing?
    As from what I can see, because it's sped up, it's actually merging 2 frames (so alternating the lines from each frame?) when I'd rather it just drop one frame

  • White Lines Across Powerpoint files converted to PDF

    I have a number of PDF files that were created from Microsoft Powerpoint presentations on a Windows PC. The Preview inspector says they were created with Acrobat Distiller 8.2.2. Until recently, these PDFs looked 100% correct when viewed in Preview or Safari. Now, though, they have horizontal white lines across the pages. There are 6 white lines on each page, evenly spaced, each about 1 pixel in height. They stay at 1 pixel in height even when I zoom in/out on the document. At some zoom levels (100% being one of them), the area above and below some lines will become misaligned. When viewed with Adobe Reader 9, the lines are not there but the misalignment is (though it is not exactly the same as in Preview). Unfortunately, I can't say when this started happening other than it was fine in September (2010) and isn't this afternoon (Nov 22, 2010). It happens on a coworker's Macbook Pro as well as my iMac so it is not something unique to my Mac.
    Anyone else seeing this? Any ideas as to how to fix it?

    Hi, I am having this problem also on my iMac. Some of the images have the lines and some of them don't. When the PDFs are printed, the lines don't show. My problem is that these PDFs will be linked to on a website for the clients to print, and they will seem them with the lines. They are pretty unsightly, and my boss has put this into my lap to figure out, since I am the designer. Did you ever find an answer for this? I don't know where else to turn, since this company is insisting on using Pages, rather than something like InDesign.

Maybe you are looking for

  • BALANCE SHEET WITH UNASSIGNED NODES

    First of all hello everybody, In spite of being involved with balance sheet and P&L query I´m facing a problem never had before. We´re using the virtual infocube 0FIGL_V10 and its own query provided by Business Content. Up to yesterday everything wor

  • URGENT : On clicking back button of IE error message in the content area

    Hi all, On clicking of a link in my navigation area KM folders are displayed in the content area via a KM iview. On 1st level navigation in this iView and clicking the explorer back button there is no problem. But if we navigate to inner folders and

  • 11.1.1.3 Business rules not appearing in form

    Hi I am working in 11.1.1.3, and creating HBRs in calc manager, with variables, for use on planning forms (i.e. to "Run on Save") Problem I have is that even after the rule is deployed, it is not visible in the "Business Rules" tab while editing the

  • Mass role creation and addition of tcodes to role menu

    Hi Folks, We've a requirement of building 1000's of single roles for an implementation. Our security matrix is ready with the role names and the list of tcodes to be embedded in each of these roles. What I would like to know is if we can automate a p

  • Error message in cluster db

    HI I have 4 node cluster running in red hat linux 5 - oracle 10 g rel2 4 Database are running A , B , C,D Instancese are running like this first node A1 & D1 second node B2 & C2 third node B3 & C3 fourth node A4 & D4 I AM getting a lot of trace file