** Purpose of 'levels' in End-to-End Monitoring

Hi Friends,
1. What is the meaning and purpose of a) Low b) Medium c) High monitoring levels ?
2. What the term 'Monitoring Server' indicates?
3. What is the purpose of 'Send' and 'Received' Check boxes for the Component Type other than Integration Server?
All are in 'Configuration' tab of RWB.
Could you kinldy clarify friends...?
Kind Regards,
Jeg P.

1. Selecting the monitoring level that you want to use for each of the selected components. monitoring level determines which tracking agent are activated for respective component and which monitoring data an active agent delivers.
3.Configure as sending or receiving system or both depending on the component type

Similar Messages

** End-to-End Monitoring - RFC destination error while save config in RWB

Hi Friends,
We have 2 RFC destinations in our XI server. 1) PMI<client>001 2) PMI<client><client>800. First one is for XI server. Next one is for Sender/Receiver System.
We want to activate End-to-End Monitoring in RWB. For this, when I save configuration, it throws the following error.
Incorrect RFC Destinations: When the configuration is saved, an RFC destination is created on the monitoring server for each XI component to enable end-to-end monitoring of the respective XI component. However, the test call failed for the destinations listed. Therefore, you must check the call and the authorization on the monitoring server for the destinations concerned, by using transaction SM59. Also check whether RFC user used for the destination is maintained in the relevant XI component. Note that a component can only be monitored when its RFC destination is maintained correctly.
I have checked the user in the above destinations. For the first destination, we have assigned PIRWBUSER of XI system. Test Connection is OK, but unable to login remote. At the same time, PIRWBUSER is not locked.
For the second destination, I have assigned some login user of sender/receiver system. Test connection is OK. Able to login remotely.
There is no RFC user in our XI system. (I tried using RFCUSER* thru SU01 tcode).
There is no PIRWBUSER in the Sender/Receiver System.
In RWB, Configuration, 3 components are there. 1) XIIntegrationServer 2) Business System (for Sender/Receiver System) 3) XI Adapter Framework. I selected last two. (First one is already selected). Monitoring Level : Medium (for all 3). Send and Receive Check box is selcted for the last two.
So, what could be the problem for the above error?
Could you kindly clarifiy friends.
Thanking you
Kind Regards,
Jeg P.

Hi friends,
I have one RFC Destination PMI<sysid>001. (Abap Connction) in my XI system. This destination is for XI server. Connection Test is OK. Remote Logon by using the PIRWBUSER is also ok.
In the 'Configuration' tab of the Runtime Workbench, when we select 'Save Configuration', (Business System and Adapter Framework is not activated) with the default activation for XI Integration Server, the system throws the following error.
Incorrect RFC Destinations: When the configuration is saved, an RFC destination is created on the monitoring server for each XI component to enable end-to-end monitoring of the respective XI component. However, the test call failed for the destinations listed. Therefore, you must check the call and the authorization on the monitoring server for the destinations concerned, by using transaction SM59. Also check whether RFC user used for the destination is maintained in the relevant XI component. Note that a component can only be monitored when its RFC destination is maintained correctly.
When we save configuration, an one more destination is automatically created in the name as below.
PMI<sysid>001<yyyymmdd>. For Example, PMIPID00120080207.
When we test newly created RFC destination, connection is OK, but not able to remot login using the same user PIRWBUSER.
The difference between old and new RFC destination, in old, we have selected Load Balancing is 'Yes', but in the new it is 'No'. The system also tells the error below.
Name or Password is incorrect (repeat logon) - PMIPID00120080207
But, still remote login is possible in the old RFC destination using the PIRWBUSER.
So, What could be the problem ...?
Kindly reply, friends.

Page cannot be displayed in PI end to end monitoring

In our production environment we get the 'page cannot be displayed' screen after from end to end monitoring clicking on display.
We did turn on the monitoring via RWB in 'configuration' on level high for the XIIntergrationServer and XIAdapterFramework and than saved the configuration.
Our other PI servers work fine.
Any ideas?
Already checked not 885405 and 923666

Hi,
Please refer http://help.sap.com/saphelp_nwpi71/helpdata/en/98/1ccbed8a233e4ca57d2b938e67c188/frameset.htm
for the help on configuration of end to end monitoring in RWB. Please note that you have started HTTP services for PMI in SICF or RSXMB_ACTIVATE_ICF_SERVICES.
As its production system, you can contact your basis team and get check if any system/service user is locked.
Alternatively , instead of using E2E monitoring we can get most of the PI related information using Message monitoring itsef, i dont use end to end monitoring so often as most info i get from moni trace or message monitoring,component monitoring RWB.
Best Regards,
Srinivas

Configuring end-to-end monitoring

1) configuring end-to-end monitoring - we have to put monitoring level high for which components
2) activating end-to-end-monitoring -what's the frequency we have to mention ? what is the appropriate frequency?
3) in activating ccms monitoring for xi -ccms config
in sxmb_adm parameter - ccms_monitoring to 1 ? why
give me all the details of that , i hope i will get appropriate from u guru's

Hi,
configuring end-to-end monitoring - we have to put monitoring level high for which components
--> End to End monitoring is possible with Runtime Workbench with End-to-End Monitoring option.
Refer
Configuring End-to-End Monitoring
http://help.sap.com/saphelp_nw04s/helpdata/en/06/5d1741b393f26fe10000000a1550b0/frameset.htm
2) activating end-to-end-monitoring -what's the frequency we have to mention ? what is the appropriate frequency?
---> You can have the end-to end monitoring based on the processing of the interfaces and the performance of the interface.
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/frameset.htm
3) in activating ccms monitoring for xi -ccms config in sxmb_adm parameter-ccms_monitoring to 1 ?why
-->
XI : Configuring CCMS Monitoring for XI
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i -
CCMS Monitoring Infrastructure FAQ
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/dae7037a-0901-0010-f998-fd29d955714b
CCMS Monitoring Detailed Overview
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2bc02d89-0901-0010-be9c-9c038d739e60
Thanks
Swarup

Confusion configuring End-to-End Monitoring

Hi,
I'm having some confusion configuring end-to-end-monitoring for the Adapter Framework on the Integration Server. If I activate the monitoring and save, I get the message that the HTTP Destination pmistore cannot be found and the prompt to make a new one. The destination pmistore is there, however, and correct, as far as I can tell.
If I make a new one using XIRWBUSER, I get the HTTP error 403, if I do it with a user with SAP_ALL, it works. Is this user just used to create the destination, but the communication still goes with XIRWBUSER, as it should be?
What am I doing wrong?
Greetings,
Francis Wolf

Hi,
configuring end-to-end monitoring - we have to put monitoring level high for which components
--> End to End monitoring is possible with Runtime Workbench with End-to-End Monitoring option.
Refer
Configuring End-to-End Monitoring
http://help.sap.com/saphelp_nw04s/helpdata/en/06/5d1741b393f26fe10000000a1550b0/frameset.htm
2) activating end-to-end-monitoring -what's the frequency we have to mention ? what is the appropriate frequency?
---> You can have the end-to end monitoring based on the processing of the interfaces and the performance of the interface.
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/frameset.htm
3) in activating ccms monitoring for xi -ccms config in sxmb_adm parameter-ccms_monitoring to 1 ?why
-->
XI : Configuring CCMS Monitoring for XI
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i -
CCMS Monitoring Infrastructure FAQ
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/dae7037a-0901-0010-f998-fd29d955714b
CCMS Monitoring Detailed Overview
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2bc02d89-0901-0010-be9c-9c038d739e60
Thanks
Swarup

No entry in End-to-End monitor

I found no entry in my End-to-End Monitoring. the Overall message is 0, and I found a green icon with "No errors" text in its right. If I click the green icon, a view will occurs below and shows "No instances are available".
I've configured the components I want to monitor in "Configuration" with high level and saved.
Anyone can help me?

hi,
did you check the prerequisites?
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
also check this doc:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0b4580be-0601-0010-d3ad-bd6ce51ae916
for end to end configuration - step by step
Regards,
michal

RFC Connection Error (for end-to-end Monitoring)

Hi,
I am configure End-to-End monitoring in XI 3.0 SP20, PMI does't show data in end-to-end monitoring... anyway!!! I check RFC connection PMI
RFC destination name: PMIXQA90020080827
in TEST connection I am getting an error: "Group PUBLIC not Found" where may I define that PUBLIC to solve this problem please let me know.... thanks
and what is Group PUBLIC in RFC ??? what does it do???
Is there any notes I can read for related issue, please help me out this
Thanks a lot in advanced
Edited by: issue2008 issue on Aug 28, 2008 10:03 AM

Thanks for reply... SURE I can tell you
Connection Type: 3 R/3 connection
ScreenShot shows blow:
http://www.flickr.com/photos/25222280@N03/2806290586/sizes/o/
Thanks
Edited by: issue2008 issue on Aug 28, 2008 10:20 AM

Error in End-to-End Monitoring

Dear All,
when i click display on End-to-End Monitoring, and then not accepting any user etc and the following error message come up
Logon failed error
Call of URL http://sapxi:50010/sap/bc/bsp/sap/spi_monitor/monitor.do terminated due to error in logon data.
Note
Logon performed in system XID .
Logon performed for client 100 and language EN.
What can I do?
Check the validity of your SSO ticket for this system.
If you do not yet have a user ID, contact your system administrator.
error code: ICF-LE-http-c:100-l:3-T:21-C:3-U:5-P:-L:7
HTTP 401 - Unauthorized
Please help.
Regards,
Venkat.

Dear All,
As per your suggestion,I have used PIRWBUSER,
In Runtime Workbench -> configuration (with user PIRWBUSER) i see "A monitoring configuration for the selected XI domain does not yet exist" and a table with 2 component are checked.
When i try "Save Configuration", it writes " RFCDEST_NOT_CREATED".
and I try to use Runtime Workbench -> end-to-end monitoring.But i get "No process defined for this domain ", when "Display".
Please suggest me,how to procced.
Sridhar:user is aleady having the SAP_XI_MONITORING role.
Regards,
Venkat.

Getting Error while accessing End to end Monitoring.

Hi,
We are running XI 3.0 on MS SQL Server. While we hit END to END Monitoring Button we getting some error.
Here the Error.
Service cannot be reached
What has happened?
URL http://lax05sesd02:50000/sap/bc/bsp/sap/spi_monitor/monitor.do call was terminated because the corresponding service is not available.
Note
The termination occurred in system XID with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:LAX05SESD02_XID_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
Please help us to solve this issue.

Hi,
We are running XI 3.0 on MS SQL Server. While we hit END to END Monitoring Button we getting some error.
Here the Error.
Service cannot be reached
What has happened?
URL http://lax05sesd02:50000/sap/bc/bsp/sap/spi_monitor/monitor.do call was terminated because the corresponding service is not available.
Note
The termination occurred in system XID with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:LAX05SESD02_XID_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
Please help us to solve this issue.

Java.lang.NullPointerException in End-to-End monitoring

Hi!
When trying to start End-To-End monitoring over the RWB I get a NUllPointerException from 'JNet' as the applet tries to start up:
Class com.sap.jnet.JNetApplet.class not found
java.lang.ClassNotFoundException: com.sap.jnet.JNetApplet.class at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
caused by: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
I'm using Java(TM) Plug-in: Version 1.4.2_08
Can anyone help?
Thanks,
Fabian

Hi Fabian,
Have you done the step:
Configuring End-to-End Message Monitoring
from the XI configuration guide?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
Regards,
michal

End to End Monitoring is not working

Hi All,
I don't see the msgs in End to End Monitoring. I have checked all connections in SM59, full host name parameters is present in profile.
I cannot select the "instance" radio button either. Anyone had these problems in SP12, XI3.0 SR1.
thanks
tony

Hi All,
I have also same problem of end to end monitoring ,it does not refreshing statistics after certain interval,
currently statitical data is showing like
Errors 0
Open 0
Successfully Completed 0
Overall 0
I have set frequency of hourly in furthur settings.
But messages are not seen , it is showing only starting (when we configured end to end monitoring) days message statistics .
Expecting some clue to resolve this.
Thanks in advance
Regards,
Santosh

End to End Monitoring

Hello,
I have implemented this scenario :
"Flat file ->mapping->BPM (for calling a bapi)->mapping->Flat file" and when i use the message monitoring sometimes end-to-end monitoring is available and sometimes not, Why ??? Is there a specific configuration for enable end-to-end monitoring in any case ?
Regards
Vincent

Hi,
What error do you get ? I consistently get this error :-
Service cannot be reached
What has happened?
URL http://axonlabs11.axonlabs.co.uk:8000/sap/bc/bsp/sap/spi_monitor/monitor.do call was terminated because the corresponding service is not available.
Note
The termination occurred in system XI3 with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:axonlabs11_XI3_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
Kind regards
Colin.

End-to-end monitoring error!!!!!!

hi.
i have a problem.
i trying to start a new selection in end-to-end monitoring, but i have an error with JNET: java.lang.NullPointerException. can anybody help me to resolve it please??
another question is: What is JNET?
is the fist time i configure CCMS and have thousands problems
be patiends with me!
thanks very much!!!

java.lang.NullPointerException in End-to-End monitoring
java.lang.NullPointerException in End-to-End monitoring
Ref. the above threads.

Jnet exception in RWB in end-to-end-monitoring

hi,
i have problems with jnet in end-to-end-monitoring:
java.lang.NullPointerException
     at com.sap.plaf.frog.FrogScrollPaneUI$1.propertyChange(FrogScrollPaneUI.java:113)
     at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
     at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
     at java.awt.Component.firePropertyChange(Unknown Source)
     at javax.swing.JScrollPane.setHorizontalScrollBar(Unknown Source)
     at javax.swing.plaf.basic.BasicComboPopup.createScroller(Unknown Source)
     at javax.swing.plaf.basic.BasicComboPopup.<init>(Unknown Source)
     at com.sap.plaf.frog.FrogComboPopup.<init>(FrogComboPopup.java:21)
     at com.sap.plaf.frog.FrogComboBoxUI.createPopup(FrogComboBoxUI.java:410)
     at com.sap.plaf.frog.FrogComboBoxUI.installUI(FrogComboBoxUI.java:178)
     at javax.swing.JComponent.setUI(Unknown Source)
     at javax.swing.JComboBox.setUI(Unknown Source)
     at javax.swing.JComboBox.updateUI(Unknown Source)
     at javax.swing.JComboBox.init(Unknown Source)
     at javax.swing.JComboBox.<init>(Unknown Source)
     at com.sap.jnet.clib.JNcToolBar$ComboBox.<init>(JNcToolBar.java:68)
     at com.sap.jnet.clib.JNcToolBar.addComboBox(JNcToolBar.java:196)
     at com.sap.jnet.clib.JNcAppWindow.newUI(JNcAppWindow.java:878)
     at com.sap.jnet.clib.JNcAppWindow.newData(JNcAppWindow.java:1520)
     at com.sap.jnet.JNetData.createGraphFromDOM(JNetData.java:594)
     at com.sap.jnet.JNetData.load(JNetData.java:815)
     at com.sap.jnet.JNetApplet.initJNetApplet(JNetApplet.java:508)
     at com.sap.jnet.JNetApplet.access$000(JNetApplet.java:40)
     at com.sap.jnet.JNetApplet$1.run(JNetApplet.java:283)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
my jre is 1.6.0_11
thanks christoph

hi,
now, i have anothe problem. i am in end-to-end-monitoring ans start the selection from the past. on right site - i see the jnet flowchart. in the final error box i do a doubleclick and a attribute display popup is coming. when i am calling the application: message id i become a popup window with an error message 'ashost' is missing. in exchangeprofile under Runtime Workbench the parameter: com.sap.aii.rwb.server.centralmonitoring.r3.ashost is set to normally hostname not fqdn.
do you have an idea?
christoph

PMI Problem (End-to-End Monitor does not show data)

(End-to-End Monitor does not show data)
As I know that XML Messages Alerts T-code: SXMB_NOMI shows all alerts including errors as well I put date Range: 01-01-2008 to 01-08-2008 and filters for "Errors" system does show more then 300 errors
But problem in RWB - End-to-End Monitoring, when I click on display and date range 01-01-2008 to 01-08-2008 its give me graphical overview in right of window
and shows summary:
Errors:                     0 Average
Open                  904 Maximum
Successfully Completed         0 Minimum
Overall:                  904
I thing End-to-End Monitor doesn't get data from PMI...
why does't show any errors, which is shows in SXMB_MONI
Please tell me how to resolve that problem
Thanks in Advanced
Edited by: issue2008 issue on Aug 26, 2008 12:02 PM

Hi,
A destination pointing to the Integration Server is created on the J2EE engine to collect the data for the end-to-end monitoring. If this destination is incorrect or if there are several clients in the system of the integration server, the data may be sent to the incorrect client.
This might be a reason so you can implement the correction of the destination in a manual way as follows:
Open the J2EE visual administrator.
Select the Destination service.
Select the HTTP "pmistore" destination.
Enter the URL for the ICF service spi_gate of the Integration Server in the following form "http://<host>:<port>/sap/bc/spi_gate?sap-client=<xxx>", where 'host' denotes the host of the integration server, 'port' denotes the HTTP port, and xxx is the client of the Integration Server.
Thanks,
Hemant

** Purpose of 'levels' in End-to-End Monitoring

Similar Messages

Maybe you are looking for